AEG F55310IM0 Manuel utilisateur

EN User Manual 2

Dishwasher

FR Notice d'utilisation 19

Lave-vaisselle

RU Инструкция по эксплуатации 38

Посудомоечная машина

FAVORIT55310IMO

CONTENTS

1. SAFETY INFORMATION...........................................................................................3

2. SAFETY INSTRUCTIONS.......................................................................................... 4

3. PRODUCT DESCRIPTION........................................................................................ 6

4. CONTROL PANEL.....................................................................................................7

5. PROGRAMMES......................................................................................................... 8

6. SETTINGS.................................................................................................................. 9

7. OPTIONS................................................................................................................. 11

8. BEFORE FIRST USE.................................................................................................11

9. DAILY USE................................................................................................................12

10. HINTS AND TIPS...................................................................................................14

11. CARE AND CLEANING........................................................................................ 15

12. TROUBLESHOOTING...........................................................................................17

13. TECHNICAL INFORMATION...............................................................................18

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you

impeccable performance for many years, with innovative technologies that help

make life simpler features you might not find on ordinary appliances. Please

spend a few minutes reading to get the very best from it.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.aeg.com

Register your product for better service:

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the

following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

www.aeg.com2

1. SAFETY INFORMATION

Before the installation and use of the appliance,

carefully read the supplied instructions. The

manufacturer is not responsible if an incorrect

installation and use causes injuries and damages. Always

keep the instructions with the appliance for future

reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved.

• Do not let children play with the appliance.

• Keep all detergents away from children.

•

Keep children and pets away from the appliance door

when it is open.

• Cleaning and user maintenance shall not be made by

children without supervision.

1.2

General Safety

•

This appliance is intended to be used in household

and similar applications such as:

– farm houses; staff kitchen areas in shops, offices

and other working environments;

– by clients in hotels, motels, bed & breakfast and

other residential type environments.

• Do not change the specification of this appliance.

• The operating water pressure (minimum and

maximum) must be between 0.5 (0.05) / 8 (0.8) bar

(Mpa)

• Obey the maximum number of 13 place settings.

• If the supply cord is damaged, it must be replaced by

the manufacturer, its Authorised Service Centre or

similarly qualified persons in order to avoid a hazard.

ENGLISH

3

• Put knives and cutlery with sharp points in the cutlery

basket with the points down or in a horizontal

position.

• Do not keep the appliance door open without

supervision to prevent to fall on it.

• Before maintenance, deactivate the appliance and

disconnect the mains plug from the mains socket.

• Do not use water spray and steam to clean the

appliance.

• The ventilation openings in the base (if applicable)

must not be obstructed by a carpet.

• The appliance is to be connected to the water mains

using the new supplied hose-sets. Old hose sets must

not be reused.

2. SAFETY INSTRUCTIONS

2.1 Installation

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Do not install or use the appliance

where the temperature is less than 0

°C.

• Obey the installation instruction

supplied with the appliance.

• Make sure that the appliance is

installed below and adjacent to safe

structures.

2.2 Electrical connection

WARNING!

Risk of fire and electrical

shock.

• The appliance must be earthed.

• Make sure that the electrical

information on the rating plate agrees

with the power supply. If not, contact

an electrician.

• Always use a correctly installed

shockproof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug and to the mains

cable. Should the mains cable need

to be replaced, this must be carried

out by our Authorised Service Centre.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• This appliance complies with the

E.E.C. Directives.

• Only for UK and Ireland. The

appliance has a 13 amp mains plug. If

it is necessary to change the fuse in

the mains plug, use fuse: 13 amp

ASTA (BS 1362).

2.3 Water connection

• Make sure not to cause damage to

the water hoses.

• Before you connect the appliance to

new pipes or pipes not used for a

long time, let the water flow until it is

clean.

• The first time you use the appliance,

make sure that there is no leakage.

• The water inlet hose has a safety valve

and a sheath with an inner mains

cable.

www.aeg.com4

WARNING!

Dangerous voltage.

• If the water inlet hose is damaged,

immediately disconnect the mains

plug from the mains socket. Contact

the Authorised Service Centre to

replace the water inlet hose.

2.4 Use

• Do not sit or stand on the open door.

• Dishwasher detergents are

dangerous. Obey the safety

instructions on the detergent

packaging.

• Do not drink and play with the water

in the appliance.

• Do not remove the dishes from the

appliance until the programme is

completed. There can be detergent

on the dishes.

• The appliance can release hot steam

if you open the door while a

programme operates.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

2.5 Service

• Contact the Authorised Service

Centre to repair the appliance. We

recommend only the use of original

spare parts.

• When you contact the Authorised

Service Centre, ensure that you have

the following information that is

available on the rating plate.

Model :

PNC :

Serial Number :

2.6 Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent

children and pets to get closed in the

appliance.

ENGLISH

5

3. PRODUCT DESCRIPTION

4

3

7

9

8

10

56

11

1

2

1

Upper spray arm

2

Lower spray arm

3

Filters

4

Rating plate

5

Salt container

6

Air vent

7

Rinse aid dispenser

8

Detergent dispenser

9

Cutlery basket

10

Lower basket

11

Upper basket

www.aeg.com6

4. CONTROL PANEL

1

5678910

2 3 4

1

On/off button

2

Programme indicators

3

Indicators

4

Display

5

Delay button

6

ExtraHygiene button

7

Multitab button

8

Programme button (up)

9

Programme button (down)

10

Reset button

4.1 Indicators

Indicator Description

Multitab indicator.

Salt indicator. It is always off while the programme operates.

Rinse aid indicator. It is always off while the programme operates.

Delay indicator.

ExtraHygiene indicator.

ENGLISH

7

5. PROGRAMMES

Programme Degree of soil

Type of load

Programme phases Options

1)

• Normal soil

• Crockery and cut-

lery

• Prewash

• Wash 50 °C

• Rinses

• Dry

• ExtraHygiene

• Multitab

2)

• All

• Crockery, cutlery,

pots and pans

• Prewash

• Wash from 45 °C

to 70 °C

• Rinses

• Dry

• ExtraHygiene

• Multitab

3)

• Heavy soil

• Crockery, cutlery,

pots and pans

• Prewash

• Wash 70 °C

• Rinses

• Dry

• Multitab

• Normal or light

soil

• Delicate crockery

and glassware

• Wash 45 °C

• Rinses

• Dry

• Multitab

4)

• Fresh soil

• Crockery and cut-

lery

• Wash 60 °C

• Rinses

• ExtraHygiene

• Multitab

5)

• All • Prewash

1)

With this programme you have the most efficient use of water and energy consumption for crockery

and cutlery with normal soil. (This is the standard programme for test institutes).

2)

The appliance senses the degree of soil and the quantity of items in the baskets . It automatically ad-

justs the temperature and the quantity of water, the energy consumption and the programme duration.

3)

This programme has a high temperature rinsing phase for better hygiene results. During the rinsing

phase, the temperature stays at 70 °C for at least 10 minutes.

4)

With this programme you can wash a load with fresh soil. It gives good washing results in a short time.

5)

With this programme you can quickly rinse dishes to prevent remains of food to bond on dishes and

odours to form in the appliance. Do not use detergent with this programme.

5.1 Consumption values

Programme

1)

Water

(l)

Energy

(kWh)

Duration

(min)

11 1.050 195

7 - 12 0.6 - 1.4 40 - 150

13 - 15 1.3 - 1.5 140 - 160

www.aeg.com8

Programme

1)

Water

(l)

Energy

(kWh)

Duration

(min)

13 - 14 0.7 - 0.9 70 - 80

9 0.9 30

4 0.1 14

1)

The pressure and the temperature of the water, the variations of the mains supply, the options and the

quantity of dishes can change the values.

5.2 Information for test

institutes

For all the necessary information for test

performance, send an email to:

[email protected]

Write down the product number (PNC)

that is on the rating plate.

6. SETTINGS

6.1 Programme selection

mode and user mode

When the appliance is in programme

selection mode it is possible to set a

programme and to enter the user mode.

In user mode, the following settings

can be changed:

• The level of the water softener

according to the water hardness.

• The deactivation of the rinse aid

dispenser when you want to use the

Multitab option without rinse aid.

These settings will be saved until you

change them again.

6.2 The water softener

The water softener removes minerals

from the water supply, which would have

a detrimental effect on the washing

results and on the appliance.

The higher the content of these minerals,

the harder your water is. Water hardness

is measured in equivalent scales.

The water softener should be adjusted

according to the hardness of the water in

your area. Your local water authority can

advise you on the hardness of the water

in your area. It is important to set the

right level of the water softener to assure

good washing results.

Water hardness

German de-

grees (°dH)

French degrees

(°fH)

mmol/l Clarke de-

grees

Water softener lev-

el

47 - 50 84 - 90 8.4 - 9.0 58 - 63 10

43 - 46 76 - 83 7.6 - 8.3 53 - 57 9

37 - 42 65 - 75 6.5 - 7.5 46 - 52 8

29 - 36 51 - 64 5.1 - 6.4 36 - 45 7

ENGLISH

9

German de-

grees (°dH)

French degrees

(°fH)

mmol/l Clarke de-

grees

Water softener lev-

el

23 - 28 40 - 50 4.0 - 5.0 28 - 35 6

19 - 22 33 - 39 3.3 - 3.9 23 - 27

5

1)

15 - 18 26 - 32 2.6 - 3.2 18 - 22 4

11 - 14 19 - 25 1.9 - 2.5 13 - 17 3

4 - 10 7 - 18 0.7 - 1.8 5 - 12 2

<4 <7 <0.7 < 5

1

2)

1)

Factory setting.

2)

Do not use salt at this level.

How to set the water softener

level

The appliance must be in programme

selection mode.

1. To enter the user mode, press and

hold simultaneously and until

the indicators , and

start to flash and the display is blank.

2. Press

.

• The indicators and go

off.

• The indicator continues to

flash.

• The display shows the current

setting: e.g. = level 5.

3. Press again and again to

change the setting.

4. Press the on/off button to confirm

the setting.

6.3 The rinse aid dispenser

The rinse aid helps to dry the dishes

without streaks and stains.

The rinse aid is automatically released

during the hot rinse phase.

Use of rinse aid and multi-

tablets

When you activate the option Multitab,

the rinse aid dispenser continues to

release rinse aid. However you can

deactivate the rinse aid dispenser. In this

case the drying results may not be

satisfactory.

With the rinse aid dispenser deactivated,

the rinse aid indicator is always off.

How to deactivate the rinse

aid dispenser

The appliance must be in programme

selection mode.

1. To enter the user mode, press and

hold simultaneously

and until

the indicators , and

start to flash and the display is blank.

2. Press

.

• The indicators and go

off.

• The indicator

continues to

flash.

• The display shows the current

setting:

= rinse aid dispenser

activated.

3. Press to change the setting.

= rinse aid dispenser deactivated.

The rinse aid indicator goes off.

4. Press the on/off button to confirm

the setting.

www.aeg.com10

7. OPTIONS

Desired options must be

activated every time before

you start a programme.

It is not possible to activate

or deactivate options while a

programme is running.

7.1 Multitab

Activate this option when you use multi-

tablets that integrate the salt, rinse aid

and detergent functions. They can also

contain other cleaning or rinsing agents.

This option deactivates the release of

salt. The salt indicator does not come on.

With the use of this option the

programme duration is prolonged to

increase the cleaning and drying results

with the use of multi-tablets.

Multitab is not a permanent option and

must be selected at every cycle.

How to activate Multitab

Press Multitab.

The related indicator comes on.

7.2 ExtraHygiene

With this option you have better hygiene

results. During the last rinsing phase, the

temperature stays at 70 °C for at least 10

minutes.

How to activate ExtraHygiene

Press ExtraHygiene, the related

indicator comes on

If the option is not applicable to the

programme, the related indicator does

not come on or it flashes quickly for a

few seconds and then goes off.

The display shows the updated

programme duration.

8. BEFORE FIRST USE

1. Make sure that the current level of

the water softener agrees with the

hardness of the water supply. If

not, adjust the level of the water

softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any

processing residuals that can still be

inside the appliance. Do not use

detergent and do not load the

baskets.

When you start a programme, the

appliance can take up to 5 minutes to

recharge the resin in the water softener.

It seems that the appliance is not

working. The washing phase starts only

after this procedure is completed. The

procedure will be repeated periodically.

8.1 The salt container

CAUTION!

Only use salt specifically

designed for dishwashers.

The salt is used to recharge the resin in

the water softener and to assure good

washing results in the daily use.

How to fill the salt container

1. Turn the cap of the salt container

counterclockwise and remove it.

2. Put 1 litre of water in the salt

container (Only for the first time).

3. Fill the salt container with dishwasher

salt.

4. Remove the salt around the opening

of the salt container.

ENGLISH

11

5. Turn the cap of the salt container

clockwise to close the salt container.

Water and salt can come out

from the salt container when

you fill it. Risk of corrosion.

To prevent it, after you fill

the salt container, start a

programme.

8.2 How to fill the rinse aid

dispenser

A

B

D

C

M

A

X

1

2

3

4

+

-

A

B

D

C

CAUTION!

Only use rinse aid

specifically designed for

dishwashers.

1. Press the release button (D) to open

the lid (C).

2. Pour the rinse aid in the dispenser (A)

until the liquid reaches the fill level

'max'.

3. Remove the spilled rinse aid with an

absorbent cloth to prevent too much

foam.

4. Close the lid. Make sure that the

release button locks into position.

You can turn the selector of

the released quantity (B)

between position 1 (lowest

quantity) and position 4 or 6

(highest quantity).

9. DAILY USE

1. Open the water tap.

2. Press the on/off button to activate

the appliance.

Make sure that the appliance is in

programme selection mode.

• If the salt indicator is on, fill the

salt container.

• If the rinse aid indicator is on, fill

the rinse aid dispenser.

3. Load the baskets.

4. Add the detergent. If you use multi-

tablets, activate the option Multitab.

5. Set and start the correct programme

for the type of load and the degree

of soil.

9.1 Using the detergent

30

20

A BD

C

www.aeg.com12

20

30

B

A D

C

1. Press the release button (B) to open

the lid (C).

2. Put the detergent, in powder or

tablets, in the compartment (A).

3. If the programme has a prewash

phase, put a small quantity of

detergent in the compartment (D).

4. Close the lid. Make sure that the

release button locks into position.

9.2 Setting and starting a

programme

The Auto Off function

This function decreases energy

consumption by deactivating

automatically the appliance when it is not

operating.

The function comes into operation:

• 5 minutes after the completion of the

programme.

• After 5 minutes if the programme has

not started.

Starting a programme

1. Keep the appliance door ajar.

2. Press the on/off button to activate

the appliance. Make sure that the

appliance is in programme selection

mode.

3. Press

or to select a

programme.

• The indicator of the selected

programme flashes.

• The display shows the

programme duration.

4. Set the applicable options.

5. Close the appliance door to start the

programme.

• The programme indicator stops

flashing and comes on with fixed

light.

• The programme duration starts to

decrease with steps of 1 minute.

If you press the on/off button before the

start of the programme, the appliance

will be in programme selection mode

when you activate it again.

Starting a programme with

delay start

1. Set a programme.

2. Press Delay again and again until the

display shows the delay time you

want to set (from 1 to 24 hours).

The indicator of the selected programme

continues to flash.

3. Close the appliance door to start the

countdown.

The programme indicator stops flashing

and comes on with fixed light.

• When the countdown is completed,

the programme starts.

• While the countdown is running only

the buttons Reset and Delay are

active. It is not possible to change the

programme or options.

Opening the door while the

appliance operates

If you open the door while a programme

is running, the appliance stops. When

you close the door, the appliance

continues from the point of interruption.

If the door is opened for

more than 30 seconds

during the drying phase, the

running programme will end.

Cancelling the delay start while

the countdown operates

When you cancel the delay start you

have to set the programme and options

again.

Press and hold Reset until the appliance

is in programme selection mode.

ENGLISH

13

Cancelling the programme

Press and hold Reset until the appliance

is in programme selection mode.

Make sure that there is detergent in the

detergent dispenser before you start a

new programme.

End of the programme

When the programme is completed the

display shows 0:00.

All buttons are inactive except for the

on/off button.

1. Press the on/off button or wait for

the Auto Off function to

automatically deactivate the

appliance.

If you open the door before the

activation of Auto Off, the appliance is

automatically deactivated.

2. Close the water tap.

10. HINTS AND TIPS

10.1 General

The following hints will ensure optimal

cleaning and drying results in daily use

and also help to protect the

environment.

• Remove larger residues of food from

the dishes into the waste bin.

• Do not pre-rinse dishes by hand.

When needed, use the prewash

programme (if available) or select a

programme with a prewash phase.

• Always use the whole space of the

baskets.

• When loading the appliance, make

sure that the dishes can be

completely reached and washed by

the water released from the spray arm

nozzles. Make sure that items do not

touch or cover each other.

• You can use dishwasher detergent,

rinse aid and salt separately or you

can use the multi-tablets (e.g. ''3in1'',

''4in1'', ''All in 1''). Follow the

instructions written on the packaging.

• Select the programme according to

the type of load and degree of soil.

With the ECO programme you have

the most efficient use of water and

energy consumption for crockery and

cutlery with normal soil.

10.2 Using salt, rinse aid and

detergent

• Only use salt, rinse aid and detergent

for dishwasher. Other products can

cause damage to the appliance.

• Multi-tablets are usually suitable in

areas with a water hardness up to 21

°dH. In areas exceeding this limit,

rinse aid and salt must be used in

addition to the multi-tablets.

However, in areas with hard and very

hard water we recommend to use

solo-detergent (powder, gel, tablets

without additional functions), rinse aid

and salt separately for optimal

cleaning and drying results.

• If you use multi-tablets you can select

the Multitab option (if available). This

option increases the cleaning and

drying results with the use of multi-

tablets.

• Detergent tablets do not fully dissolve

with short programmes. To prevent

detergent residues on the tableware,

we recommend that you use the

tablets with long programmes.

• Do not use more than the correct

quantity of detergent. Refer to the

instructions on the detergent

packaging.

10.3 What to do if you want to

stop using multi-tablets

Before you start to use separately

detergent, salt and rinse aid do the

following procedure.

1. Set the highest level of the water

softener.

2. Make sure that the salt and rinse aid

containers are full.

3. Start the shortest programme with a

rinsing phase. Do not add detergent

and do not load the baskets.

4. When the programme is completed,

adjust the water softener according

to the water hardness in your area.

5. Adjust the released quantity of rinse

aid.

www.aeg.com14

10.4 Loading the baskets

• Only use the appliance to wash items

that are dishwasher-safe.

• Do not put in the appliance items

made of wood, horn, aluminium,

pewter and copper.

• Do not put in the appliance items that

can absorb water (sponges,

household cloths).

• Remove remaining food from the

items.

• Make soft the remaining burned food

on the items.

• Put hollow items (cups, glasses and

pans) with the opening down.

• Make sure that cutlery and dishes do

not bond together. Mix spoons with

other cutlery.

• Make sure that glasses do not touch

other glasses.

• Put small items in the cutlery basket.

• Put light items in the upper basket.

Make sure that the items do not

move.

• Make sure that the spray arm can

move freely before you start a

programme.

10.5 Before starting a

programme

Make sure that:

• The filters are clean and correctly

installed.

• The cap of the salt container is tight.

• The spray arms are not clogged.

• There is dishwasher salt and rinse aid

(unless you use multi- tablets).

• The position of the items in the

baskets is correct.

• The programme is applicable for the

type of load and for the degree of

soil.

• The correct quantity of detergent is

used.

10.6 Unloading the baskets

1. Let the tableware cool down before

you remove it from the appliance.

Hot items can be easily damaged.

2. First remove items from the lower

basket, then from the upper basket.

At the end of the

programme water can still

remain on the sides and on

the door of the appliance.

11. CARE AND CLEANING

WARNING!

Before maintenance,

deactivate the appliance and

disconnect the mains plug

from the main socket.

Dirty filters and clogged

spay arms decrease the

washing results. Make a

check regularly and, if

necessary, clean them.

11.1 Cleaning the filters

The filter system is made of 3 parts.

C

B

A

1. Turn the filter (B) counterclockwise

and remove it.

ENGLISH

15

2. Remove the filter (C) out of filter (B).

3. Remove the flat filter (A).

4. Wash the filters.

5. Make sure that there are no residues

of food or soil in or around the edge

of the sump.

6. Put back in place the flat filter (A).

Make sure that it is correctly

positioned under the 2 guides.

7. Reassemble the filters (B) and (C).

8. Put back the filter (B) in the flat filter

(A). Turn it clockwise until it locks.

CAUTION!

An incorrect position of the

filters can cause bad

washing results and damage

to the appliance.

11.2 Cleaning the spray arms

Do not remove the spray arms. If the

holes in the spray arms are clogged,

remove remaining parts of soil with a thin

pointed object.

11.3 External cleaning

• Clean the appliance with a moist soft

cloth.

• Only use neutral detergents.

• Do not use abrasive products,

abrasive cleaning pads or solvents.

11.4 Internal cleaning

• Carefully clean the appliance,

including the rubber gasket of the

door, with a soft damp cloth.

www.aeg.com16

• If you regularly use short duration

programmes, these can leave

deposits of grease and limescale

inside the appliance. To prevent this,

we recommend to run long duration

programmes at least 2 times per

month.

• To maintain the performance of your

appliance at its best, we recommend

to use monthly a specific cleaning

product for dishwashers. Follow

carefully the instructions on the

packaging of the product.

12. TROUBLESHOOTING

If the appliance does not start or it stops

during operation. Before you contact an

Authorised Service Centre, check if you

can solve the problem by yourself with

the help of the information in the table.

With some problems, the display

shows an alarm code.

Problem and alarm code Possible solution

You cannot activate the ap-

pliance.

• Make sure that the mains plug is connected to the

mains socket.

• Make sure that there is no damaged fuse in the fuse

box.

The programme does not

start.

• Make sure that the appliance door is closed.

• If the delay start is set, cancel the setting or wait for the

end of the countdown.

• The appliance has started the procedure to recharge

the resin inside the water softener. The duration of the

procedure is approximately 5 minutes.

The appliance does not fill

with water.

The display shows .

• Make sure that the water tap is open.

• Make sure that the pressure of the water supply is not

too low. For this information, contact your local water

authority.

• Make sure that the water tap is not clogged.

• Make sure that the filter in the inlet hose is not clogged.

• Make sure that the inlet hose has no kinks or bends.

The appliance does not

drain the water.

The display shows .

• Make sure that the sink spigot is not clogged.

• Make sure that the drain hose has no kinks or bends.

The anti-flood device is on.

The display shows .

• Close the water tap and contact an Authorised Service

Centre.

Once you have checked the appliance,

deactivate and activate the appliance. If

the problem occurs again, contact an

Authorised Service Centre.

For alarm codes not described in the

table, contact an Authorised Service

Centre.

ENGLISH

17

12.1 The washing and drying results are not satisfactory

Problem Possible solution

There are whitish streaks or

bluish layers on glasses and

dishes.

• The release quantity of rinse aid is too much. Adjust

the rinse aid selector to a lower position.

• The quantity of detergent is too much.

There are stains and dry water

drops on glasses and dishes.

• The released quantity of rinse aid is not sufficient. Ad-

just the rinse aid selector to a higher position.

• The quality of the rinse aid can be the cause.

The dishes are wet. • The programme does not have a drying phase or has

a drying phase with low temperature.

• The rinse aid dispenser is empty.

• The quality of the rinse aid can be the cause.

• The quality of the multi-tablets can be the cause. Try a

different brand or activate the rinse aid dispenser and

use rinse aid and multi-tablets together.

Refer to "Hints and tips" for

other possible causes.

13. TECHNICAL INFORMATION

Dimensions Width / height / depth (mm) 596 / 818 - 898 / 575

Electrical connection

1)

Voltage (V) 220 - 240

Frequency (Hz) 50

Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8)

Water supply

Cold water or hot water

2)

max 60 °C

Capacity Place settings 13

Power consumption Left-on mode (W) 0.99

Power consumption Off-mode (W) 0.10

1)

Refer to the rating plate for other values.

2)

If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the

hot water supply to decrease energy consumption.

14. ENVIRONMENT CONCERNS

Recycle the materials with the symbol .

Put the packaging in applicable

containers to recycle it. Help protect the

environment and human health and to

recycle waste of electrical and electronic

appliances. Do not dispose appliances

marked with the symbol with the

household waste. Return the product to

your local recycling facility or contact

your municipal office.

www.aeg.com18

TABLE DES MATIÈRES

1. CONSIGNES DE SÉCURITÉ................................................................................... 20

2. INSTRUCTIONS DE SÉCURITÉ.............................................................................. 21

3. DESCRIPTION DE L'APPAREIL.............................................................................. 23

4. BANDEAU DE COMMANDE................................................................................. 24

5. PROGRAMMES....................................................................................................... 25

6. RÉGLAGES...............................................................................................................26

7. OPTIONS................................................................................................................. 28

8. AVANT LA PREMIÈRE UTILISATION.....................................................................28

9. UTILISATION QUOTIDIENNE................................................................................30

10. CONSEILS..............................................................................................................32

11. ENTRETIEN ET NETTOYAGE..............................................................................33

12. EN CAS D'ANOMALIE DE FONCTIONNEMENT..............................................35

13. CARACTÉRISTIQUES TECHNIQUES.................................................................. 37

POUR DES RÉSULTATS PARFAITS

Merci d'avoir choisi ce produit AEG. Nous l'avons conçu pour qu'il vous offre des

performances irréprochables pour longtemps, en intégrant des technologies

innovantes qui vous simplifient la vie grâce à des caractéristiques que vous ne

trouverez pas forcément sur des appareils ordinaires. Veuillez prendre quelques

instants pour lire cette notice afin d'utiliser au mieux votre appareil.

Visitez notre site Internet pour :

Obtenir des conseils d'utilisation, des brochures, de l'aide, des informations :

www.aeg.com

Enregistrer votre produit pour obtenir un meilleur service :

www.registeraeg.com

Acheter des accessoires, consommables et pièces de rechange d'origine pour

votre appareil :

www.aeg.com/shop

SERVICE APRÈS-VENTE

N'utilisez que des pièces de rechange d'origine.

Avant de contacter le service, assurez-vous de disposer des informations

suivantes : Modèle, PNC, numéro de série.

Vous trouverez ces informations sur la plaque signalétique.

Avertissement/Attention : consignes de sécurité.

Informations générales et conseils.

Informations en matière de protection de l'environnement.

Sous réserve de modifications.

FRANÇAIS

19

1. CONSIGNES DE SÉCURITÉ

Avant d'installer et d'utiliser cet appareil, lisez

soigneusement les instructions fournies. Le fabricant ne

peut être tenu pour responsable des dommages et

blessures liés à une mauvaise installation ou utilisation.

Conservez toujours cette notice avec votre appareil

pour vous y référer ultérieurement.

1.1 Sécurité des enfants et des personnes

vulnérables

• Cet appareil peut être utilisé par des enfants âgés

d'au moins 8 ans et par des personnes ayant des

capacités physiques, sensorielles ou mentales réduites

ou dénuées d’expérience ou de connaissance, s’ils (si

elles) sont correctement surveillé(e)s ou si des

instructions relatives à l’utilisation de l'appareil en

toute sécurité leur ont été données et si les risques

encourus ont été appréhendées.

• Les enfants ne doivent pas jouer avec l’appareil.

• Ne laissez pas les détergents à la portée des enfants.

• Tenez les enfants et les animaux éloignés de la porte

de l'appareil lorsque celle-ci est ouverte.

• Le nettoyage et l’entretien par l'usager ne doivent pas

être effectués par des enfants sans surveillance.

1.2

Consignes générales de sécurité

•

Cet appareil est conçu uniquement pour un usage

domestique et des utilisations telles que :

– bâtiments de ferme, cuisines réservées aux

employés dans les magasins, bureaux et autres

lieux de travail ;

– pour une utilisation privée, par les clients, dans des

hôtels et autres lieux de séjour.

• Ne modifiez pas les caractéristiques de cet appareil.

• La pression de l'eau en fonctionnement (minimale et

maximale) doit se situer entre 0.5 (0.05) / 8 (0.8) bar

(Mpa)

www.aeg.com20

La page est en cours de chargement...

AEG F55310IM0 Manuel utilisateur

AEG F55310IM0 Manuel utilisateur

dans d''autres langues