LUXRITE LR23280 5 CCT Selectable Double Ring Manuel utilisateur

Marque: LUXRITE

Modèle: LR23280 5 CCT Selectable Double Ring

Taper: Manuel utilisateur

WARNING

RISK OF ELECTRIC SHOCK: Turn power o before inspection, installation or removal. Properly ground electrical enclosure.

RISK OF FIRE: Follow all NEC and local codes. Use only UL or IEC approved wire for input/output connections. Minimum size 18 AWG (0.75 mm2). Do not install

insulation within 3 inches (76 mm) of luminaire top.

RISK OF INJURY, RISK OF DAMAGE: Luminaire may fall if inner bezel is not secured properly to outer bezel. Ensure that the whole loop is positioned and secured

under the washer.

INSTALLATION INSTRUCTIONS

1. Before beginning assembly, installation or operation of product, make sure all parts

are present. If any part is missing or damaged, do not attempt to assemble, install or

operate the product. Contact customer service for replacement parts.

2. Loosen screws counter clockwise (Figure 1)

3. Install the electrical box screws in the junction box (Figure 2)

4. Connect the black and white wires of the ﬁxture with two wires of the same colors

from the junction box with the wirecaps. Connect the grounding wire of the

ﬁxture with the one from the junction box with the wirecap. (Figure 3)

5. Put the ﬁxture plate accross the screw of the lock in Figure 2, then rotate ﬁxture

plate clockwise and lock it tightly with the screw lock. Use the switch to choose

desired Color Temperature. (Figure 4)

6. Securely mount the ﬁxture plate to the junction box ﬁrmly. (Figure 5)

7. Place Diuser (Figure 6) and tighten screws clockwise. (Figure 7)

8. Restore power to the electrical box. Turn the light switch on to activate the ﬁxture.

9. Supply at 120 V

This device complies with Part 15 of the FCC Rules. Operations is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. This Class (A) RELD complies with the Canadian standard ICES-003. Ce DEFR de la classe (A) est conforme

a la NBB-003 du Canada.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and if not

installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause

PACKAGE CONTENTS:

1 ROUND FLUSHMOUNT HOUSING

1 ROUND FLUSHMOUNT DIFFUSER (SHIPPED AS PART OF FLUSHMOUNT HOUSING)

3 WIRENUTS (IN PARTS BAG)

2 - 1 1/2 ELECTRICAL BOX SCREWS (IN PARTS BAG)

1 INSTALLATION MANUAL

SAVE THESE INSTRUCTIONS: