Hilti HIT-HY 100
20
Adhesive anchoring system for rebar and anchor fastenings in concrete.
Safety instructions:
Contains: Hydroxypropyl methacrylate(A), boric acid (A), dibenzoyl peroxide(B)
(A, B)
(A)
(B)
Danger
H317 May cause an allergic skin reaction. (A,B)
H319 Causes serious eye irritation (A)
H360 May damage fertility or the unborn child. (A)
H400 Very toxic to aquatic life. (B)
P262 Do not get in eyes, on skin, or on clothing.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/attention.
Disposal considerations
Empty packs:
▶ Leave the mixer attached and dispose of via the local Green Dot recovery system
▶ or EAK waste material code: 150102 plastic packaging
Full or partially emptied packs:
▶ Must be disposed of as special waste in accordance with ofcial regulations.
– EAK waste material code: 08 04 09* waste adhesives and sealants containing organic solvents or other
dangerous substances.
– or EAK waste material code: 20 01 27* paint, inks, adhesives and resins containing dangerous substances.
Content: 330 ml / 11.1 .oz. 500 ml / 16.9 . oz Weight: 575g / 20,3oz 880g / 31,0oz
Warranty: Refer to standard Hilti terms and conditions of sale for warranty information.
Failure to observe these installation instructions, use of non-Hilti anchors, poor or questionable base material
conditions, or unique applications may affect the reliability or performance of the fastenings.
Printed: 14.05.2018 | Doc-Nr: PUB / 5157157 / 000 / 05