ADEUNIS Repeater kit SIGFOX Mode d'emploi

Adeunis

283 rue Louis Néel - Parc Technologique Pré Roux

38920 CROLLES - France

www.adeunis.com

Sigfox Repeater

Expand sigfox network coverage

Guide utilisateur / User Guide

Version 3.0.0

FR

Sigfox Repeater - Guide utilisateur / User guide version 3.0.0

2

Page of 4

EN

Préambule / Preamble / Präambel / Preambolo / Preámbulo

• Ce guide décrit les fonctionnalités du produit adeunis®. Il explique les modes de fonctionnement du produit et

la manière de le conﬁ gurer.

• This guide describes the functionalities of the product adeunis®. It explains its functionnments and how to

conﬁ gure it.

• Dieser Leitfaden beschreibt die Funktionalität des Produktes adeunis®. Er erklärt die Betriebsfunktionen des

Produktes und die Art und Weise, um es zu konﬁ gurieren.

• Questa guida descrive la funzionalità del prodotto adeunis®. Questo spiega come funziona il prodotto e come

conﬁ gurarlo.

• Esta guía describe las funcionalidades del producto adeunis®. En él se explica los modos de funcionamiento

del producto y cómo conﬁ gurarlo.

• Aucun extrait de ce document ne pourra être reproduit ou transmis (sous format électronique ou papier, ou

par photocopie) sans l’accord d’adeunis®. Ce document pourra être modiﬁ é sans préavis. Toutes les marques

citées dans ce guide font l’objet d’un droit de propriété intellectuelle.

• No part of this document may be reproduced or transmitted (in electronic or paper, or photocopying) without

the agreement adeunis®. This document may be changed without notice. All trademarks mentioned in this

guide are the subject of intellectual property rights. adeunis®.

• Kein Teil dieses Dokuments darf reproduziert oder übertragen werden (in elektronischer oder Papierform oder

Fotokopie) ohne die Zustimmung adeunis®. Dieses Dokument darf ohne vorherige Ankündigung geändert wer-

den. Alle Marken in diesem Handbuch erwähnt werden, sind Gegenstand des geistigen Eigentums.

• Nessuna parte di questo documento può essere riprodotta o trasmessa (in fotocopie elettronico o cartaceo, o),

senza il consenso adeunis®. Questo documento può essere modiﬁ cato senza preavviso. Tutti i marchi citati in

questa guida sono oggetto di diritti di proprietà intellettuale.

• Ninguna parte de este documento puede ser reproducida o transmitida (en fotocopias electrónico o en papel,

o) sin el acuerdo adeunis®. Este documento puede ser modiﬁ cada sin previo aviso. Todas las marcas comer-

ciales mencionadas en esta guía son el tema de los derechos de propiedad intelectual.

Adeunis

283, rue Louis Néel

38920 Crolles

France

Web www.adeunis.com

FR

Sigfox Repeater - Guide utilisateur / User guide version V3.0.0

3

Page of 4

EN

Table des matières/Table of contents

ENGLISH 5

PRODUCTS AND REGULATORY INFORMATION 6

1. PRODUCT DESCRIPTION 11

1.1. General description 11

1.2. Dimensions 12

1.3. Electronic card 12

1.4. Technical speciﬁcations 13

1.4.1 General characteristics 13

1.4.2 Autonomy 13

1.5. User interface 13

1.5.1 USB Port 13

1.5.2 LED 14

1.6. Mobile application 14

2. ACTIVATION PROCESS AND CONFIGURATION 15

2.1. Conﬁgure the White List 15

2.2. Activating the repeater 16

2.3. Conﬁguration mode 16

2.3.1 Conﬁguration through the Repeater Application 16

2.3.1.01 Connection 17

2.3.1.02 Radio mapping (Optional) 18

2.3.1.03 Setup 19

1.1.1.01 White list edition 23

1.1.1.02 Advanced - Expert view: Duty Cycle check disable/re-enable 23

2.3.1.04 Advanced - Expert view: Statistics access 24

2.4. Operation mode 25

2.4.1 Installation mode 26

2.4.2 Repeater monitoring with the sigfox backend 27

3. DEVICE CONFIGURATION WITH AT COMMANDS 31

3.1. Connecting the device to a computer 31

3.2. Command mode 31

3.3. Conﬁguration through a terminal and AT Commands 33

3.4. Description of the registers 34

4. DESCRIPTION OF THE REPEATER FRAMES 36

4.1. Uplink frame 36

4.1.1 Fixed bytes 36

4.1.1.01 Byte code 36

4.1.1.02 Status Byte 36

4.1.2 Ask for a new ID in the White List 36

4.1.3 Ask for White List modiﬁcation or conﬁguration modiﬁcation 36

4.1.4 Reporting of downlink success or failure 37

4.1.5 White List conﬁrmation 37

4.1.6 Summary of the conditions of transmission of uplink frames 38

4.2. Downlink frames 38

4.2.1 Suppress all IDs from the White List and switch repeater into PARK, INSTALLATION or OPERATION mode 38

4.2.2 Delete an ID from the White List 39

4.2.3 Add an ID into the White List or conﬁrm White-List 39

4.2.4 Modify the Repeater conﬁguration 39

4.2.5 Freeze the list of devices repeated in “auto-record” mode into the White List 40

4.2.6 Downlink success or error code 40

5. BATTERY REPLACEMENT AND START-UP OF THE DEVICE 41

5.1. Battery replacement 41

5.2. Closing the casing 42

5.3. Starting up the product using a magnet 42

6. INSTALLATION AND USE 43

6.1. Correct positioning of the product 43

6.2. Types of fastenings 43

6.2.1 Tube or mast fastenings 43

6.2.2 Fixing with screws 44

6.2.3 DIN-Rail ﬁxing 45

7. DOCUMENT HISTORY 45

FR

Sigfox Repeater - Guide utilisateur / User guide version 3.0.0

4

Page of 4

EN

FRANCAIS 46

INFORMATIONS 47

DEUTSCH 52

Vorschriften 52

FR

Sigfox Repeater - Guide utilisateur / User guide version V3.0.0

5

Page of 57

EN

ENGLISH

FR

Sigfox Repeater - Guide utilisateur / User guide version 3.0.0

6

Page of 57

EN

PRODUCTS AND REGULATORY INFORMATION

Document Information

Title Sigfox Repeater - User Guide

Sub-title

/

Document type User Guide

Version 3.0.0

This document applies to the following products :

Nom Référence Version ﬁrmware

Sigfox Repeater RC1 ARF8168

V2.03.05

DISCLAIMER

This document and the use of any information contained therein, is subject to the acceptance of the adeunis®

terms and conditions. They can be downloaded from www.adeunis.com.

adeunis® makes no warranties based on the accuracy or completeness of the contents of this document and

reserves the right to make changes to speciﬁ cations and product descriptions at any time without notice.

adeunis® reserves all rights to this document and the information contained herein. Reproduction, use or disclo-

adeunis® is a registered trademark in the EU and other countries.

TECHNICAL SUPPORT

Website

Our website contains a lot of useful information: information on modules and wireless modems, user guides, and

conﬁ guration software and technical documents which can be accessed 24 hours a day.

E-mail

If you have technical problems or cannot ﬁ nd the required information in the provided documents, contact our

Technical Support on our website, section « Technical Support ». This ensures that your request will be processed

as soon as possible.

Helpful Information when Contacting Technical Support

When contacting Technical Support, please have the following information ready:

• Product type

• Firmware version (for example V1.0)

• A clear description of your question or the problem

• A short description of the application

FR

Sigfox Repeater - Guide utilisateur / User guide version V3.0.0

7

Page of 57

EN

EU Declaration of Conformity

WE

adeunis

283 rue LOUIS NEEL

38920 Crolles, France

04.76.92.01.62

www.adeunis.com

Declare that the DoC is issued under our sole responsibility and belongs to the following product:

Apparatus model/Product: Repeater

Type: ARF8168A

Object of the declaration:

The object of the declaration described above is in conformity with the relevant Union harmonisation

legislation:

Directive 2014/53/UE (RED)

The following harmonised standards and technical specifications have been applied:

Title: Date of standard/specification

EN 300 220-2 V3.1.1 2017/02

EN 301 489-1 V2.1.1 2016/11

EN 301 489-3 V2.1.0 2016/09

EN 62368-1 2014

EN 62311 2008

December, 18

th

,2017 Monnet Emmanuel, Certification Manager

FR

Sigfox Repeater - Guide utilisateur / User guide version 3.0.0

8

Page of 57

EN

INTRODUCTION

hout written permission from the owner) via printing, copying, recording or by any other means, translating this

manual (in full or partially) into any other language, including all programming languages, using any electrical,

mechanical, magnetic or optical devices, manually or any by other methods, is prohibited.

adeunis® reserves the right to change the technical speciﬁ cations or functions of its products, or to cease manu-

facturing any of its products, or to cease technical support for one of its products without notice in writing and

urges its customers to make sure that the information they have is valid.

adeunis® conﬁ guration software and programs are available free of charge in a non-modiﬁ able version. adeu-

nis® can make no guarantees, including guarantees concerning suitability and applicability for a certain type

of application. Under no circumstances can the manufacturer, or the distributor of an adeunis® program, be

held liable for any damage caused by the use of the aforesaid program. Program names, as well as all copyright

relating to programs, are the exclusive property of adeunis®. Any transfer, granting of licences to a third party,

leasing, hire, transport, copying, editing, translation, modiﬁ cation into another programming language or reverse

engineering are prohibited without adeunis®’s prior written authorisation and consent.

Adeunis

283, rue Louis Néel

38920 Crolles

France

Web

www.adeunis.com

DISCLAIMER

This document and the use of any information contained therein, is subject to the acceptance of the adeunis®

terms and conditions. They can be downloaded from www.adeunis.com.

adeunis® makes no warranties based on the accuracy or completeness of the contents of this document and

reserves the right to make changes to speciﬁ cations and product descriptions at any time without notice.

adeunis® reserves all rights to this document and the information contained herein. Reproduction, use or disclo-

adeunis® is a registered trademark in the EU and other countries.

TECHNICAL SUPPORT

Website

Our website contains a lot of useful information: information on modules and wireless modems, user guides, and

conﬁ guration software and technical documents which can be accessed 24 hours a day.

E-mail

If you have technical problems or cannot ﬁ nd the required information in the provided documents, contact our

Technical Support on our website, section « Technical Support ». This ensures that your request will be processed

as soon as possible.

Helpful Information when Contacting Technical Support

When contacting Technical Support, please have the following information ready:

• Product type

• Firmware version (for example V1.0)

• A clear description of your question or the problem

• A short description of the application

FR

Sigfox Repeater - Guide utilisateur / User guide version V3.0.0

9

Page of 57

EN

ENVIRONMENTAL RECOMMENDATIONS

All superﬂ uous packaging materials have been eliminated. We have done everything possible to make it easy to

separate the packaging into three types of materials: cardboard (box), expanded polystyrene (ﬁ ller material)

and polyethylene (packets, foam protective sheets). Your device is composed of materials that can be recycled

and reused if it is dismantled by a specialist company. Please observe local regulations concerning the manner in

which waste packaging material, used batteries and your obsolete equipment are disposed of.

WARNINGS

Valid for products indicated in the declaration of conformity

Read the instructions in the manual.

The safety of this product is only guaranteed when it is used in accordance with its purpose. Maintenance

should only be carried out by qualiﬁ ed persons.

Risk of explosion if the battery is removed with an incorrect type. Contact Adeunis for more information if

needed.

Risk of explosion if the battery is replaced by an incorrect type

Please note: Do not install the equipment close to a heat source or in damp conditions.

Please note: When the equipment is open, do not carry out any operations other than the ones set out in this

document.

Please note: Do not open the product as there is a risk of electrical shock.

Please note: For your own safety, you must ensure that the equipment is switched oﬀ before carrying out

any work on it.

Please note: For your own safety, the power supply circuit must be SELV (Safety Extra Low Voltage) and

must be from limited power sources.

Please note: When the aerial is installed outside, it is essential to connect the cable screen to the buil-

ding’s earth. We recommend using lightning protection. The protection kit chosen must permit the coaxial cable

to be earthed (eg: coaxial lightning arrester with earthing of the cable at diﬀ erent places on the aerial at the base

of pylons and at the entrance, or just before entering the premises).

The product must be equipped with a switching mechanism so that the power can be cut. This must be close to

the equipment. Any electrical connection of the product must be equipped with a protection device against vol-

tage spikes and short-circuits.

Please note: the equipment is not intended for the use by a child.

FR

Sigfox Repeater - Guide utilisateur / User guide version 3.0.0

10

Page of 57

EN

RECOMMANDATIONS REGARDING USE

• Before using the system, check that the power supply voltage shown in the user manual corresponds to your

supply. If it doesn’t, please consult your supplier.

• Place the device against a ﬂ at, ﬁ rm and stable surface.

•

The device must be installed in a location that is suﬃ ciently ventilated so that there is no risk of internal hea-

ting and it must not be covered with objects such as newspapers, cloths, curtains, etc.

• The device’s aerial must be free and at least 10 cm away from any conducting material.

• The device must never be exposed to heat sources such as heating equipment.

• Do not place the device close to objects with naked ﬂ ames such as lit candles, blowtorches, etc.

• The device must not be exposed to harsh chemical agents or solvents likely to damage the plastic or corrode

the metal parts.

DISPOSAL OF WASTE BY USERS IN PRIVATE HOUSEHOLDS WITHIN THE EURO-

PEAN UNION

This symbol on the product or on its packaging indicates that this product must not be disposed of with your

other household waste. Instead, it is your responsibility to dispose of your waste by taking it to a collection point

designated for the recycling of electrical and electronic appliances. Separate collection and recycling of your waste

at the time of disposal will contribute to conserving natural resources and guarantee recycling that respects the

environment and human health. For further information concerning your nearest recycling centre, please contact

your nearest local authority/town hall oﬃ ces, your household waste collection company or the shop where you

bought the product

This symbol on the devode or its packaging means the use of a DC voltage.

Warning: If the charger is used with any other batteries or products whatsoever, there is a risk of an ex-

plosion. After use, the batteries must be disposed of at an appropriate recycling centre. They must not be thrown

away to degrade in the environment. When batteries are replaced, the device must be corectly implemented.

Warning for Switzerland : the annex 4.10 of SR 814.013 Standad must be applied for batteries.

FR

Sigfox Repeater - Guide utilisateur / User guide version V3.0.0

11

Page of 57

EN

1. PRODUCT DESCRIPTION

IMPORTANT NOTE: the Sigfox Repeater can be started or restarted using a magnet. The Sigfox Repeater must be declared on the

Sigfox network to be used.

Description:

• The Sigfox Repeater is a ready to use radio transmitter allowing to expand sigfox network coverage

• This product meets the needs of users who require to connect any sigfox products in areas with few network coverage.

• Like other Sigfox devices the Sigfox Repeater has to be declared on the Sigfox back-end.

• The Sigfox Repeater is an uplink service message repetitions for devices, the repeater can not repeat downlink address to devices.

• It allows to deﬁne a list of products to be repeated (White List) that can be conﬁgured in different way.

• A facilitated implementation procedure is available.

• The Sigfox Repeater is powered by a replaceable internal battery.

Antenna

2 holes for

passing collars

through

Rail-DIN

unlocking lever

4 fastening holes

Cables outlet

packing gland

Casing base

Casing base detail

1.1. General description

FR

Sigfox Repeater - Guide utilisateur / User guide version 3.0.0

12

Page of 57

EN

1.2. Dimensions

Values in millimetres

1.3. Electronic board

USB port for product

conﬁguration

RF module

sigfox protocol

Internal antenna

FR

Sigfox Repeater - Guide utilisateur / User guide version V3.0.0

13

Page of 57

EN

1.4. Technical speciﬁcations

1.4.1 General characteristics

Settings Value

Supply voltage 3.6V nominal

Power supply Battery pack Li-SOCl2 (non-rechargeable)

Working temperature -20°C / +60°C

Dimensions 185 x 50 x 27mm

Weight 135g

Casing IP 67

sigfox zone RC1

Range Up to 300m in outdoor and 50m in indoor

1.4.2 Autonomy

Use case Nb of devices

Total number of messag-

es to repeat (per day)

Estimated battery life (1

repetition)

Estimated battery life (3

repetitions)

Best case : 1 device which

transmits 1 message /day

1 1 7 years 7 years

5 devices, each transmit-

ting 2 messages /day

5 10 6 years 5 years

15 devices, each transmit-

ting 5 messages /day

15 75 3,5 years 1,5 years

Worst case : 140 messag-

es /day

N/A 140 2 years 1 year

The above values are estimations based on certain conditions of use and environment. This estimation takes into account 100 sigfox unwanted

messages. They do not represent a commitment on the part of adeunis®.

1.5. User interface

The repeater has two elements that serve as an user interface : a LED and an USB port

1.5.1 USB Port

USB port for product

conﬁguration

LED

The USB port is a micro-usb (similar to what is used in most of today’s smartphones).

It is solely used for device conﬁguration and has no other purpose. See section « 5.

DEVICE CONFIGURATION ».

IMPORTANT NOTE: When the USB is plugged in, the device is still powered by the

battery pack. Since the USB connection draws a non-negligible amount of power,

make sure that you disconnect the USB cable once the conﬁguration is ﬁnished (do

not leave it on your desk with the USB plugged in)

FR

Sigfox Repeater - Guide utilisateur / User guide version 3.0.0

14

Page of 57

EN

1.5.2 LED

The LED is used at many different stages of the product’s operating life. The following table describes the LED behavior in those different cases.

More details are provided in section 3.

Mode Red led state Green led state

PARK OFF OFF

Magnet detection ON as soon as magnet is detected ON for 1s when magnet detection has been

validated

INSTALL Blink 500ms Blink 500ms

CONFIG ON ON

OPERATION : sync detection ON until end of frame OFF

OPERATION : repetition OFF 1x ON per repetition

OPERATION : send OOB OFF 1x ON per repetition

OPERATION : duty cycle problem (impossi-

ble to send frame)

Blink (100 ms ON /100ms OFF) x3 OFF

The LED can be used to monitor the repeater’s state of operation :

1.5.2.01 SIGFOX message is detected

1.5.2.01 SIGFOX message repetition can be discarded due to duty cycle limitation

1.5.2.01 SIGFOX message is transmitted

This can either be:

a. A repetition

b. A status frame

FR

Sigfox Repeater - Guide utilisateur / User guide version V3.0.0

15

Page of 57

EN

https://play.google.com/store/apps/

details?id=com.adeunis.RepeaterApp

https://www.adeunis.com/en/produit/

repeteur-2/

IMPORTANT NOTE: the mobile application need the OTG feature on your smartphone, please check by downloading a dedicated app like «

USB OTG Checker » for example.

1.5.2.01 Low BAT : the battery is low and should be changed, but the device is still operating

1.5.2.01 DEAD : the battery is dead. The repeater stops all activity except warning LED

1.6. Mobile application

A mobile application is available on the Google store, named «adeunis sigfox Repeater App», and for Windows on our website.

This application allows you to conﬁgure a repeater but also to manage its environment and the topology.

FR

Sigfox Repeater - Guide utilisateur / User guide version 3.0.0

16

Page of 57

EN

PARK MODE

Product has never been used. It awaits activation and does nothing in the

meantime.

CONFIGURATION

MODE

The repeater conﬁguration could be done in PARK or OPERATION mode with

AT command or with the « Repeater Application » available on Windows and

Android platforms.

OPERATION

MODE

Product has been activated and declared on Sigfox network

Product has been conﬁgured and is now in normal state of operation

MODE DEAD

Battery pack is dead and needs to be replaced

2. ACTIVATION PROCESS AND CONFIGURATION

The product has 6 states of operation:

INSTALLATION

MODE

Product has been activated and declared on Sigfox network

This mode can be programmed via conﬁguration through the application or via

downlink. The repeater listen for Downlink to conﬁgure the whitelist remotely.

AUTO RECORD

MODE

Product is in OPERATION mode but the WhiteList of the repeater is empty.

The product repeat the ﬁrst 15 devices it detects per day.

2.1. Conﬁgure the White List

The White List of the repeater can be conﬁgured in 3 different ways.

- «Auto-record» mode

When activated, if the White List of the repeater is empty, the repeater will enter in OPERATION mode with Auto-record and

repeat automatically the ﬁrst 15 devices detected. A reset of this list of IDs is made every time the Status frame is sent to the

sigfox back-end (24h by default, linked to the S300 register). It is possible to freeze this list of repeated device to make it per-

manent with a downlink (see downlink section). Be careful, in this mode the product can repeat sigfox devices that you don’t

know and if you freeze the list it will freeze the unknown devices as well.

PAY ATTENTION : this mode is not recommended in noisy environment.

- Via USB

Conﬁgure the White List thanks to the repeater application or using AT commands. Refer to the dedicated section (2.3.1.03)

- Via Downlink

The repeater can be switched into INSTALLATION mode via a downlink. In this mode the repeater will stop to repeat device

and will listen for downlink containing the ID of the device to be added to the White List.

In OPERATION mode, every day (frequency linked to the status frame - S300 register) the repeater opens a listening phase to

receive a downlink to add or remove ID from the White List. Refer to the dedicated section (3.0 Operation mode)

FR

Sigfox Repeater - Guide utilisateur / User guide version V3.0.0

17

Page of 57

EN

2.2. Activating the repeater

By default the repeater is in PARK mode. In order to be used, it needs to be declared on the sigfox back-end and then activated. For this, a

magnet is needed. The following sequence has to be followed:

NOTE: the magnet must be maintained until the GREEN LED lights up. Otherwise, start again.

The magnet zone is shown on paragraph « 6.3 Starting up the product using a magnet ».

Once the product has been activated, it switches to operation mode.

2.3. Conﬁguration mode

The repeater conﬁguration could be done in PARK or OPERATION mode with the « Repeater Application » available on Windows and Android

platforms or with AT command.

2.3.1 Conﬁguration through the Repeater Application

The Repeater Application follows the below ﬂowchart:

Application

Conﬁguration

END

Radio Mapping

(Optional)

Evaluation of the environ-

ment & sensor topology

Connection

Connection procedure

of the repeater to the

application

Setup

Conﬁguration of the

repeater

1

Repeater positioning &

Veriﬁcation with status

frame

2

Reference transmitter*

placement

3

Veriﬁcation that Reference

transmitter* is covered by

repeater

*The adeunis sigfox REFERENCE

TRANSMITTER (ARF8260) is a

device tool to help install the

repeater (see product user guide

for more information).

FR

Sigfox Repeater - Guide utilisateur / User guide version 3.0.0

18

Page of 57

EN

1. Click on «Connection» 2. See section 2.1

3 . Connect the device

PAY ATTENTION to the cables: if

reversed, the connection won’t work.

2.3.1.01 Connection

This ﬁrst step shows you how to connect your repeater to your tablet, phone, etc.

• Android devices : you need an OTG cable to connect to your tablet/phone

• Windows devices : you need a driver available on adeunis’ website

Once your device is properly connected, you can either go to the « Radio Mapping » section (optional) or the « Setup » section.

5. Once connected,

the repeater ID is displayed

4. Click « Connect »

FR

Sigfox Repeater - Guide utilisateur / User guide version V3.0.0

19

Page of 57

EN

2.3.1.02 Radio mapping (Optional)

The « Radio Mapping » section helps you to determine how many repeaters you’ll have to deploy for a given sensor topology.

It gives a general overview but the result cannot be taken « as is » : ﬁeld experimentation is mandatory to ensure proper

coverage of all devices.

1. Click on « Environment » 3. Indicate the number of sensors

to be repeated

and their uplink trafﬁc volume

4. Sensor group topology asks in

which environment the sensors are

deployed

5. Additional information asks for

the sensor’s SIGFOX class

6. A summary is displayed

2. Click on «Start Radio Mapping»

FR

Sigfox Repeater - Guide utilisateur / User guide version 3.0.0

20

Page of 57

EN

Deﬁnition of a group

Depending on the site, the sensors can be scattered in different ways. It is impossible to cover all cases in the application, hence the notion of

group was introduced. An group of sensors can be deﬁned as any number of sensors contained within a bubble of 50m radius:

Topologies description

Different types of environment are identiﬁed:

Type Description

Outdoor The device is placed in an open area, without speciﬁc obstruction

Light indoor The device is placed indoor, in a not-too-harsh environment: near windows, outer walls, open-space type envi-

ronment, ﬂoors where rooms are separated by light partitions

Hard indoor The device is placed indoor, in an environment that contains heavy concrete / metal walls

Deep indoor The device is placed in underground-type environments (cellar, basement, etc.)

Mixed Mix of either of the above

Unknown /

2.3.1.03 Setup

The setup section guides the user through the process of installation & conﬁguration of the repeater.

The Sigfox Repeater has to be connected before going through this phase (see section 2.2.1.01).

• Step 1: White List conﬁguration

1. Click on « Setup » 2. Enter the IDs of the Reference

Transmitter you have

in your possession

3. In order to be repeated, the

sensors IDs have to be entered in

a WHITELIST. IDs that are not in

the Whitelist will not be repeated

La page est en cours de chargement...

ADEUNIS Repeater kit SIGFOX Mode d'emploi

Ce manuel convient également à

ADEUNIS Repeater kit SIGFOX Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents