LG 49UB8200 Le manuel du propriétaire

OWNER’S MANUAL

LED TV*

* LG LED TVs are LCD TVs with LED backlighting.

Please read this manual carefully before operating your TV

and retain it for future reference.

P/NO : MFL67987293 (1410-REV04)

www.lg.com

40UB8000 49UB8200

55UB8200

60UB8200

49UB8300

55UB8300

65UB9200

*MFL67987293*

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak

performance of your product.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR

BACK). NO USER SERVICEABLE PARTS

INSIDE. REFER TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the presence

of uninsulated dangerous voltage within the

product’s enclosure that may be of

sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert

the user to the presence of important

operating and maintenance (servicing)

instructions in the literature accompanying

the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND

ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you

may be seriously injured or there is a

possibility of accident or death.

CAUTION

If you ignore the caution message, you may

be slightly injured or the product may be

damaged.

NOTE

The note helps you understand and use

the product safely. Please read the note

carefully before using the product.

Read these instructions.

Keep these instructions.

Follow all instructions.

Heed all warnings.

• Do not allow the television to become wet.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install

in accordance with the manufacturer’s

instructions.

• Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

• Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than

the other. A grounding type plug has two

blades and a third grounding prong. The

wide blade or the third prong are provided

for your safety. If the provided plug does not

fit into your outlet, consult an electrician for

replacement of the obsolete outlet (Can differ

by country).

• Do not press strongly upon the panel with a

hand or a sharp object such as a nail, pencil

or pen, or make a scratch on it.

IMPORTANT SAFETY INSTRUCTIONS

2

ENGLISH

3

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

• Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit

from the apparatus.

• Only use attachments/accessories specified

by the manufacturer.

• Use only with a cart, stand, tripod, bracket,

or table specified by the manufacturer, or

sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms

or when unused for long periods of time.

• Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

• Do not stick metal objects or any other

conductive material into the power cord. Do

not touch the end of the power cord while it

is plugged in.

• Keep the packing anti-moisture material

or vinyl packing out of the reach of

children. Anti-moisture material is harmful

if swallowed. If swallowed by mistake,

induce vomiting and go to the nearest

hospital. Additionally, vinyl packing can

cause suffocation. Keep it out of the reach of

children.

• CAUTION concerning the Power Cord

(Can differ by country):

It is recommended that appliances be

placed upon a dedicated circuit; that is, a

single outlet circuit which powers only that

appliance and has no additional outlets or

branch circuits. Check the specification page

of this owner’s manual to be certain. Do not

connect too many appliances to the same

AC power outlet as this could result in fire or

electric shock. Do not overload wall outlets.

Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power

cords, or damaged or cracked wire insulation

are dangerous. Any of these conditions could

result in electric shock or fire. Periodically

examine the cord of your appliance, and

if its appearance indicates damage or

deterioration, unplug it, discontinue use of

the appliance, and have the cord replaced

with an exact replacement part by an

authorized service. Protect the power cord

from physical or mechanical abuse, such as

being twisted, kinked, pinched, closed in a

door, or walked upon. Pay particular attention

to plugs, wall outlets, and the point where

the cord exits the appliance. Do not move

the TV with the power cord plugged in. Do

not use a damaged or loose power cord. Be

sure do grasp the plug when unplugging the

power cord. Do not pull on the power cord to

unplug the TV.

• Warning - To reduce the risk of fire or

electrical shock, do not expose this product

to rain, moisture or other liquids. Do not

touch the TV with wet hands. Do not install

this product near flammable objects such

as gasoline or candles, or expose the TV to

direct air conditioning.

• Do not expose to dripping or splashing and

do not place objects filled with liquids, such

as vases, cups, etc. on or over the apparatus

(e.g. on shelves above the unit).

4

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

• Grounding

(Except for devices which are not grounded.)

Ensure that you connect the earth ground

wire to prevent possible electric shock

(i.e. a TV with a three-prong grounded AC

plug must be connected to a three-prong

grounded AC outlet). If grounding methods

are not possible, have a qualified electrician

install a separate circuit breaker. Do not try to

ground the unit by connecting it to telephone

wires, lightning rods, or gas pipes.

Short-circuit

Breaker

Power

Supply

• As long as this unit is connected to the AC

wall outlet, it is not disconnected from the AC

power source even if the unit is turned off.

• Do not attempt to modify this product in

any way without written authorization from

LG Electronics. Unauthorized modification

could void the user’s authority to operate this

product.

• Outdoor Antenna Grounding

(Can differ by country):

If an outdoor antenna is installed, follow

the precautions below. An outdoor antenna

system should not be located in the vicinity

of overhead power lines or other electric light

or power circuits, or where it can come in

contact with such power lines or circuits as

death or serious injury can occur. Be sure the

antenna system is grounded so as to provide

some protection against voltage surges

and built-up static charges. Section 810 of

the National Electrical Code (NEC) in the

U.S.A. provides information with respect to

proper grounding of the mast and supporting

structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding

conductors, location of antenna discharge

unit, connection to grounding electrodes and

requirements for the grounding electrode.

Antenna grounding according to the National

Electrical Code, ANSI/NFPA 70

Ground Clamp

Grounding Conductor

(NEC Section 810-21)

Antenna Lead in Wire

Electric Service

Equipment

Antenna Discharge Unit

(NEC Section 810-20)

Ground Clamp

Power Service Grounding

Electrode System

(NEC Art 250, Part H)

NEC: National Electrical Code

• Cleaning

When cleaning, unplug the power cord and

wipe gently with a soft cloth to prevent

scratching. Do not spray water or other

liquids directly on the TV as electric shock

may occur. Do not clean with chemicals such

as alcohol, thinners, or benzine.

• Moving

Make sure the product is turned off,

unplugged, and all cables have been

removed. It may take 2 or more people to

carry larger TVs. Do not press or put stress

on the front panel of the TV.

• Ventilation

Install your TV where there is proper

ventilation. Do not install in a confined space

such as a bookcase. Do not cover the product

with cloth or other materials while plugged.

Do not install in excessively dusty places.

• If you smell smoke or other odors coming

from the TV, unplug the power cord and

contact an authorized service center.

• Keep the product away from direct sunlight.

• Never touch this apparatus or antenna during

a lightning storm.

• When mounting a TV on the wall, make sure

not to install the TV by hanging the power

and signal cables on the back of the TV.

• Do not allow an impact shock, any objects to

fall into the product, and do not drop anything

onto the screen.

• DISCONNECTING THE DEVICE FROM THE

MAIN POWER

The Power Plug is the disconnecting device.

In case of an emergency, the Power Plug

must remain readily accessible.

• Batteries

Store the accessories (battery, etc.) in a safe

location out of the reach of children.

• This apparatus uses batteries. In your

community there might be regulations that

require you to dispose of these batteries

properly due to environmental considerations.

Please contact your local authorities for

disposal or recycling information.

• Do not dispose of batteries in a fire.

• Do not short circuit, disassemble, or allow

the batteries to overheat.

• Do not use high voltage electrical equipment

near the TV, (e.g. bug zapper).

This may result in product malfunction.

5

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

• Dot Defect

The panel is a high technology product with

resolution of two million to six million pixels.

In a very few cases, you could see fine dots

on the screen while you’re viewing the TV.

Those dots are deactivated pixels and do not

affect the performance and reliability of the

TV.

• Generated Sound

Cracking noise A cracking noise that occurs

when watching or turning off the TV is

generated by plastic thermal contraction

due to temperature and humidity. This noise

is common for products where thermal

deformation is required.

Electrical circuit humming/panel buzzing

A low level noise is generated from a high-

speed switching circuit, which supplies a

large amount of current to operate a product.

It varies depending upon the product.

This generated sound does not affect the

performance and reliability of the product.

• Take care not to touch the ventilation

openings. When watching the TV for a long

period, the ventilation openings may become

hot. This does not affect the performance of

the product or cause defects in the product.

• Do not install this product on a wall if it

could be exposed to oil or oil mist. This may

damage the product and cause it to fall.

• If the TV feels cold to the touch, there may

be a small flicker when it is turned on. This

is normal; there is nothing wrong with TV.

Some minute dot defects may be visible on

the screen, appearing as tiny red, green, or

blue spots. However, they have no adverse

effect on the TV’s performance. Avoid

touching the LCD screen or holding your

finger(s) against it for long periods of time.

Doing so may produce some temporary

distortion effects on the screen.

Preventing image burn or burn-in on your

TV screen

• If a fixed image displays on the TV screen for

a long period of time, it will be imprinted and

become a permanent disfigurement on the

screen. This is image burn or burn-in and not

covered by the warranty.

• If the aspect ratio of the TV is set to 4:3 for a

long period of time, image burn may occur on

the letterboxed area of the screen.

• Avoid displaying a fixed image on the TV

screen for a long period of time (2 or more

hours for LCD, 1 or more hours for the

Plasma TV) to prevent image burn.

6

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

For USA and Canada

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment to an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference and (2) this device must accept any

interference received, including interference that may cause undesired operation of the device. Any

changes or modifications in construction of this device which are not expressly approved by the

party responsible for compliance could void the user’s authority to operate the equipment.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of

the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in

particular, specifies that the cable ground shall be connected to the grounding system of the

building, as close to the point of the cable entry as practical.

7

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

Viewing 3D Imaging (For 3D models)

WARNING

Viewing Environment

• Viewing Time

- When watching 3D content, take 5 to 15 minute breaks every hour. Viewing 3D content for a long

period of time may cause headache, dizziness, fatigue or eye strain.

Those that have a photosensitive seizure or chronic illness

• Some users may experience a seizure or other abnormal symptoms when they are exposed to a

flashing light or particular pattern from 3D content.

• Do not watch 3D videos if you feel nauseous, are pregnant and/ or have a chronic illness such as

epilepsy, cardiac disorder, or blood pressure disease, etc.

• 3D Content is not recommended for those who suffer from stereo blindness or stereo anomaly.

Double images or discomfort in viewing may be experienced.

• If you have strabismus (cross-eyed), amblyopia (weak eyesight), or astigmatism, you may have

trouble sensing depth and easily feel fatigue due to double images. It is advised to take more

frequent breaks than the average adult.

• If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D

content.

Symptoms which require discontinuation or refraining from watching 3D content

• Do not watch 3D content when you feel fatigue from lack of sleep, overwork, or intoxication.

• When these symptoms are experienced, stop using/watching 3D content and get enough rest until

the symptom subsides.

- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain,

dizziness, nausea, palpitation, blurriness, discomfort, double image, define visual inconvenience, or

fatigue.

8

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

Viewing Environment

• Viewing Distance

- Maintain a distance of at least twice the screen’s diagonal length when watching 3D content. If you

feel discomfort in viewing 3D content, move further away from the TV.

Viewing Age

• Infants / Children

- Usage/ Viewing 3D content for children under the age of 5 are prohibited.

- Children under the age of 10 may overreact and become overly excited because their vision is in

development (for example: trying to touch the screen or trying to jump into it. Special monitoring

and extra attention is required for children watching 3D content.

- Children have greater binocular disparity of 3D presentations than adults because the distance

between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic

depth compared to adults for the same 3D image.

• Teenagers

- Teenagers under the age of 19 may be stimulated to light coming from 3D videos. Advise them not

to watch 3D videos for a long time when they are tired.

• Elderly

- The elderly may perceive less of a 3D effect than the youth. Do not sit closer to the TV than the

recommended distance.

Cautions when using the 3D glasses

• Only use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.

• Do not use 3D glasses instead of your normal glasses, sunglasses, or protective goggles.

• Using modified 3D glasses may cause eye strain or image distortion.

• Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.

• The 3D glasses are fragile and are easily scratched. Use a soft, clean piece of cloth when wiping

the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with

chemicals.

9

ENGLISH

LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit

www.lg.com

.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in

this product, please visit

http://opensource.lge.com

. In addition to the source code, all referred license

terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of

performing such distribution (such as the cost of media, shipping and handling) upon email request to

[email protected]

. This offer is valid for three (3) years from the date on which you purchased the

product.

•Image shown may differ from your TV.

•Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

•The available menus and options may differ from the input source or product model that you are

using.

•New features may be added to this TV in the future.

NOTE

10

ENGLISH

TABLE OF CONTENTS

2 IMPORTANT SAFETY

INSTRUCTIONS

7 Viewing 3D Imaging (For 3D models)

9 LICENSES

9 OPEN SOURCE SOFTWARE

NOTICE

10 TABLE OF CONTENTS

11 INSTALLATION PROCEDURE

11 ASSEMBLING AND PREPARING

11 Unpacking

13 Optional Extras

14 Parts and Buttons

15 - Using the Joystick Button

16 Lifting and Moving the TV

17 Setting Up the TV

17 - Attaching the Stand

19 - Mounting on a Table

20 - Mounting on a Wall

21 - Tidying Cables

22 MAKING CONNECTIONS

22 Connecting to an Antenna or Cable

23 Connecting to an HD Receiver, DVD

Player, or VCR

23 - HDMI Connection

24 - DVI to HDMI Connection

25 - Connecting to a Mobile Phone

26 - Component Connection

27 - Composite Connection

28 Connecting to a PC

28 - HDMI Connection or DVI to HDMI

Connection

30 Connecting to an Audio System

30 - Digital Optical Audio Connection

31 Connecting a USB Device

32 REMOTE CONTROL

34 USING THE USER GUIDE

34 EXTERNAL CONTROL DEVICE

SETUP

35 SPECIFICATIONS

37 MAINTENANCE

37 Cleaning Your TV

37 - Screen, Frame, Cabinet, and Stand

37 - Power Cord

37 TROUBLESHOOTING

11

ENGLISH

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

INSTALLATION PROCEDURE

1 Open the package and make sure all the accessories are included.

2 Attach the stand to the TV set.

3 Connect an external device to the TV set.

4 Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local

dealer where you purchased your product. The illustrations in this manual may differ from the actual

product and item.

•Do not use any unapproved items to ensure the safety and product’s lifespan.

•Any damages or injuries by using unapproved items are not covered by the warranty.

•In case of some model, the thin film on screen is a part of TV, So don’t take it off.

CAUTION

• The items supplied with your product may vary depending upon the

model.

• Product specifications or contents of this manual may be changed

without prior notice due to upgrade of product functions.

• For an optimal connection, HDMI cables and USB devices should

have bezels less than 10 mm (0.39 inches) thick and 18 mm

(0.7 inches) width.

• Use an extension cable that supports USB 2.0 if the USB cable or

USB flash drive does not fit into your TV’s USB port.

•Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the

screen may not display or a connection error may occur.

•Recommended HDMI cable types

- High-Speed HDMI

®

/

TM

cable

- High-Speed HDMI

®

/

TM

cable with Ethernet

NOTE

B

A

B

*A 10 mm (0.39 inches)

*B 18 mm (0.7 inches)

12

ENGLISH

ASSEMBLING AND PREPARING

(For UB8000/UB8200 Series)

Owner’s Manual Power Cord

(Depending upon model.)

Stand Base

(See page 17.)

(For UB8000/UB8200 Series) (For UB8300 Series) (For UB8300 Series)

Stand Screws

4 EA, M4 x L20

(See page 17.)

Stand Base

(See page 18.)

Stand Screws

4 EA, M4 x L21

(See page 18.)

(For UB9200 Series)

( For 40UB8000, 49UB8200,

49UB8300)

Stand Base, Stand Body

(See page 18.)

Stand Screws

8 EA, M4 x L20

(See page 18.)

Ferrite core

(See page 13.)

FREEZE

RATIO

L/R SELECT

ENTER

BACK

EXIT

Q.MENU

INFO

MENU

CHVOL

P

A

G

E

FAV

3D

MUTE

123

456

78

0

9

MARK

LIST

FLASHBK

ENERGY

SAVING

TV

AV MODE

INPUT

Cable Holder

(See page 21.)

Cable Management

2 EA

(Depending upon model.)

(See page 21.)

Remote Control,

Batteries (AAA)

(See pages 32 and 33.)

Cinema 3D Glasses

The number of 3D glasses

may differ depending upon

the model or country.

(Depending upon model.)

Component Video Cable

(See page 26.)

Composite Video Cable

(See pages 26 and 27.)

13

ENGLISH

ASSEMBLING AND PREPARING

(For 40UB8000, 49UB8200, 49UB8300)

•How to use the ferrite core (Depending upon model.)

•Use the ferrite core to reduce the electromagnetic interference in the LAN cable.

Wind the LAN cable once on the ferrite core. Place the ferrite core close to the TV.

to the TV

Ferrite core

to an External

device

[Cross Section of

Ferrite Core]

NOTE

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification.

Contact your dealer for buying these items.

These devices only work with certain models.

The model name or design may be changed due to the manufacturer’s circumstances or policies.

AG-F***

Cinema 3D Glasses

AG-F***DP

Dual Play Glasses

AN-MR500

Magic Remote

LG Audio Device AN-VC5**

Video Call Camera

(Depending upon model.)

Compatibility

40UB8000

49UB8200

55UB8200

60UB8200

65UB9200

49UB8300

55UB8300

AG-F*** Cinema 3D Glasses

•

AG-F***DP Dual Play Glasses

•

AN-MR500 Magic Remote

• •

AN-VC5** Video Call Camera

(Depending upon model.)

• •

LG Audio Device

• •

14

ENGLISH

ASSEMBLING AND PREPARING

Parts and Buttons

Screen

Joystick Button

2

Remote Control

Sensor

Intelligent Sensor

1

Power Indicator

Speakers

(For UB8300 Series)

Screen

Joystick Button

2

Speakers

Remote Control

Sensor

Intelligent Sensor

1

Power Indicator

(For UB8000/UB8200 Series)

1. Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

2. Joystick button is located behind the screen of TV.

3. Joystick button is located below the screen of TV.

•You can set the power indicator light to on or off by selecting OPTION in the main menus.

(Depending upon model)

NOTE

(For UB9200 Series)

Screen

Intelligent Sensor

1

Remote Control Sensor

Power Indicator

Joystick Button

3

Speakers

15

ENGLISH

ASSEMBLING AND PREPARING

Using the Joystick Button

You can operate the TV by pressing the button or moving the joystick left, right, up, or down.

Basic functions

Power On

When the TV is turned off, place your finger on the joystick button, press it once,

and release it.

Power Off

When the TV is turned on, place your finger on the joystick button and press it

once for a few seconds, and release it. (However, if the Menu button is on the

screen, pressing and holding the joystick button will let you exit the Menu.)

Volume Control

If you place your finger over the joystick button and move it left or right, you can

adjust the volume level you want.

Channels Control

If you place your finger over the joystick button and move it up or down, you can

scroll through the saved channels you want.

• When your finger over the joystick button and move it up, down, left, or right, be careful not to press

the joystick button. If you press the joystick button first, you may not be able to adjust the volume

level and/or scroll through saved channels.

NOTE

Adjusting the menu

When the TV is turned on, press the joystick button one time.

You can adjust the Menu items ( , , , ) moving the joystick button up, down, left, or right.

TV off Turns the power off.

Settings Accesses the main menu.

Close Clears on-screen displays and returns to TV viewing.

Input List Changes the input source.

16

ENGLISH

ASSEMBLING AND PREPARING

Lifting and Moving the TV

When moving or lifting the TV, read the

following to prevent the TV from being

scratched or damaged and for safe

transportation regardless of its type and size.

•Avoid touching the screen at all times, as

this may result in damage to the screen.

•Do not place the product on the floor with its

front facing down without padding. Failure to

do so may result in damage to the screen.

CAUTION

• It is recommended to move the TV in the

box or packing material that the TV originally

came in.

• Before moving or lifting the TV, disconnect

the power cord and all cables.

• When holding the TV, the

screen should face away from

you to avoid damage.

• Hold the top and bottom of the TV frame

firmly. Make sure not to hold the transparent

part, speaker, or speaker grill area.

• Use at least two people to

move a large TV.

• When transporting the TV by

hand, hold the TV as shown in

the following illustration.

• When transporting the TV, do not expose the

TV to jolts or excessive vibration.

• When transporting the TV, keep the TV

upright; never turn the TV on its side or tilt

towards the left or right.

17

ENGLISH

ASSEMBLING AND PREPARING

Setting Up the TV

You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment

center or other furniture.

Attaching the Stand

If you are not mounting the TV to a wall, use the following instructions to attach the stand.

•When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat

surface to protect the screen from scratches.

•Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV

may tilt forward after being installed.)

•Do not fasten the screws with excessive force otherwise they may be worn out and become loose.

CAUTION

•Remove the stand before installing the TV on a wall mount by performing the stand attachment in

reverse.

NOTE

1 2

M4 x L20

4 EA

(For UB8000/UB8200 Series)

1

Attach the stand to the TV using the upper

mounting hole on the back of the TV.

2

Attach the stand to the TV using the lower

connection on the back of the TV.

1

2

A stand base

B stand base

18

ENGLISH

ASSEMBLING AND PREPARING

1

2

1

Attach the stand to the TV using the upper

mounting hole on the back of the TV.

2

Attach the stand to the TV using the lower

connection on the back of the TV.

1

2

A stand base

B stand

base

M4 x L21

4 EA

(For UB8300 Series) (For UB9200 Series)

1

Attach the stand to the TV using the upper

mounting hole on the back of the TV.

2

Attach the stand to the TV using the lower

connection on the back of the TV.

2

3

Stand Body (L)

Stand Body (R)

Stand Base

M4 x L20

4 EA

M4 x L20

4 EA

1

2

19

ENGLISH

ASSEMBLING AND PREPARING

Mounting on a Table

1

Lift and tilt the TV into its upright position on

a table.

- Leave a 10 cm (4 inches) (minimum) space

from the wall for proper ventilation.

10 cm

(4 inches)

2 Connect the power cord to a wall outlet.

•Do not place the TV near or on sources

of heat, as this may result in fire or other

damage.

CAUTION

Securing the TV to a wall (optional)

(Depending upon model.)

1 Insert and tighten the eye-bolts, or TV

brackets and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts

position, remove the bolts first.

2 Mount the wall brackets with the bolts to

the wall. Match the location of the wall

bracket and the eye-bolts on the rear of the

TV.

3 Connect the eye-bolts and wall brackets

tightly with a sturdy rope or cable. Make

sure to keep the rope parallel to the flat

surface.

•Make sure that children do not climb on or

hang on the TV.

CAUTION

•Use a platform or cabinet that is strong and

large enough to support the TV securely.

•Brackets, bolts, and ropes are optional. You

can obtain additional accessories from your

local dealer.

NOTE

20

ENGLISH

ASSEMBLING AND PREPARING

Mounting on a Wall

An optional wall mount can be used with your

LG Television. Consult with your local dealer for

a wall mount that supports the VESA standard

used by your TV model. Carefully attach the

wall mount bracket at the rear of the TV.

Install the wall mount bracket on a solid wall

perpendicular to the floor. If you are attaching

the TV to other building materials, please

contact qualified personnel to install the wall

mount. Detailed instructions will be included

with the wall mount. We recommend that you

use an LG brand wall mount. When you do not

use LG’s wall mount bracket, please use a wall

mount bracket where the device is adequately

secured to the wall with enough space to allow

connectivity to external devices.

10 cm

(4 inches)

Make sure to use screws and wall mounts that

meet the VESA standard. Standard dimensions

for the wall mount kits are described in the

following table.

Model 40UB8000

VESA (A x B)

A

B

200 x 200

Standard screw

M6

Number of

screws

4

Wall mount

bracket (optional)

LSW240B

MSW240

Model 49/55UB8200

49/55UB8300

60UB8200

65UB9200

VESA (A x B)

A

B

400 x 400 400 x 400

Standard screw

M6 M6

Number of

screws

4 4

Wall mount

bracket (optional)

LSW440B

MSW240

LSW440B

Wall mount bracket (optional)

LSW240B

LSW440B

MSW240

• Disconnect the power before moving or

installing the TV. Otherwise electric shock

may occur.

• If you install the TV on a ceiling or slanted

wall, it may fall and result in severe injury.

Use an authorized LG wall mount and contact

the local dealer or qualified personnel. When

using a third-party wall mount, it is not

covered by the warranty.

• Do not over tighten the screws as this may

cause damage to the TV and void your

warranty.

• Use the screws and wall mounts that meet

the VESA standard. Any damages or injuries

by misuse or using an improper accessory

are not covered by the warranty.

CAUTION

• Use the screws that are listed in the VESA

standard screw specifications.

• The wall mount kit includes an installation

manual and necessary parts.

• The wall mount bracket is optional. You can

obtain additional accessories from your local

dealer.

• The length of screws may differ depending

upon the wall mount. Make sure to use the

proper length.

• For more information, refer to the manual

supplied with the wall mount.

NOTE

La page est en cours de chargement...

LG 49UB8200 Le manuel du propriétaire

LG 49UB8200 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents