KitchenAid KGCC506RWW01 Le manuel du propriétaire

Marque: KitchenAid

Modèle: KGCC506RWW01

Catégorie: Cuisinières

Taper: Le manuel du propriétaire

Ce manuel convient également à

®itchen_kid ®

GAS COOKTOP

For questions about features, operation/performance, parts, accessories or service, call: 1-800-422-1230 or visit our website at

www.kitchenaid.com

In Canada, call 1-800-807-6777 or visit our website at www.KitchenAid.ca

TABLE DE CUISSON A GAZ

....._ _ _ ._. _ _

AU Canada, pour assistance, installation ou service, composer le 1-800-807-6777 ou visiter notre site Web au www.KitchenAid.ca

Table of Contents/Table des matieres ............................................................................. 2

Models/Modeles KGCV566 KGCC506 KG00566 KGCC706 KG00766

8286610

TABLE OF CONTENTS TABLE DES MATIERES

COOKTOP SAFETY ........................................................................ 2

PARTS AND FEATURES ................................................................ 4

COOKTOP USE .............................................................................. 7

Cooktop Controls ......................................................................... 7

Sealed Surface Burners ............................................................... 8

Surface Grates with Locator Pin.................................................. 8

Ceramic Glass Surface ................................................................ 9

Home Canning ............................................................................. 9

Cookware ..................................................................................... 9

COOKTOP CARE .......................................................................... 10

General Cleaning ........................................................................ 10

TROUBLESHOOTING .................................................................. 11

ASSISTANCE OR SERVICE ......................................................... 12

In the U.S.A ................................................................................ 12

In Canada ................................................................................... 12

WAR RAN TY .................................................................................. 13

SECURITr !:DE LA TABLE DE CUISSON .................................... 15

PIECES ET CARACTC:RISTIQUES .............................................. 17

UTILISATION DE LA TABLE DE CUISSON ................................ 20

Commandes de la table de cuisson .......................................... 20

BrQleurs de surface scelles ........................................................ 21

Grilles de surface avec tige de positionnement ......................... 22

Surface en vitroceramique ......................................................... 22

Preparation de conserves a la maison ....................................... 22

Ustensiles de cuisson ................................................................ 23

ENTRETIEN DE LA TABLE DE CUISSON .................................. 23

Nettoyage gen6ral ...................................................................... 23

Dr!:PANNAGE ................................................................................. 25

ASSISTANCE OU SERVICE ......................................................... 25

GARANTI E ..................................................................................... 27

COOKTOP SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

I WARNING: If the information in this manual is not followed exactly, a fire or explosion I

may result causing property damage, personal injury or death,

- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this

or any other appliance,

- WHAT TO DO IF YOU SMELL GAS:

• Do not try to light any appliance.

• Do not touch any electrical switch.

• Do not use any phone in your building.

• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

• If you cannot reach your gas supplier, call the fire department.

- Installation and service must be performed by a qualified installer, service agency or

the gas supplier.

iMPORTANT SAFETY iNSTRUCTiONS

WARNING: To reduce the risk of fire, electrical shock, [] Disconnect the electrical supply before servicing the

injury to persons, or damage when using the cooktop, follow

basic precautions, including the following:

[] CAUTION: Do not store items of interest to children in

cabinets above the cooktop - children climbing on the

cooktop to reach items could be seriously injured.

[] Proper Installation - The cooktop, when installed, must be

electrically grounded in accordance with local codes or, in

the absence of local codes, with the National Electrical

Code, ANSI/NFPATO or the Canadian Electrical Code,

Part 1. Be sure the cooktop is properly installed and

grounded by a qualified technician.

[] This cooktop is equipped with a three-prong grounding plug

for your protection against shock hazard and should be

plugged directly into a properly grounded receptacle. Do

not cut or remove the grounding prong from this plug.

cooktop.

[] Never Use the Cooktop for Warming or Heating the Room.

[] Injuries may result from the misuse of the cooktop such as

stepping, leaning, or sitting on the top surface.

[] Maintenance - Keep cooktop area clear and free from

combustible materials, gasoline, and other flammable

vapors and liquids.

[] Storage on the cooktop - Flammable materials should not

be stored on or near surface units.

[] Top burner flame size should be adjusted so it does not

extend beyond the edge of the cooking utensil.

SAVE THESE iNSTRUCTiONS

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances

known to the State of California to cause cancer, birth defects, or other reproductive harm, and requires businesses to warn of

potential exposure to such substances.

WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or other

reproductive harm.

This appliance can cause low-level exposure to some of the substances listed, including benzene, formaldehyde, carbon

monoxide, toluene, and soot.

PARTS AND FEATURES

This manual covers several different models, and not all models are shown. The cooktop you have purchased may have some or all of

the items listed. The locations and appearances of the features shown here may not match those of your model. All BTU ratings shown

are for Natural gas unlessotherwise noted.

Model KGCV566 (36" [91.4 cm] shown)

Control Panel

OFF

!io,,

Lite

OFF

A ................_

OFF

A. Left front burner control knob

B. Control knob off position

C. Left rear burner control knob

D. Center rear burner control knob

E. Right rear burner control knob

F Right front burner control knob

Cooktop

F G

A. 17,000 BTU burner

B. Surface burner cap

C. Left surface burner grate

D. 6,000 BTU burner

E.Model and serial number plate

(under cooktop)

F. 9,100 BTU burner

G. Center grate

H. 6,000 BTU burner

I. Right surface burner grate

J. 17,000 BTU burner

K. Control panel

Model KGCC566 (36" [91.4 cm] shown)

Model KGCC506 (30" [76.2 cm] not shown)

Control Panel

OFF

Lite

OFF

..................................E

B .......................... OFF

A. Left front burner control knob

B. Control knob off position

C. Left rear burner control knob

D. Center rear burner control knob

(on 36" [9!.4 cm] models only)

Cooktop

F G

OFF

E. Right rear burner control knob

F Right front burner control knob

A. 17,000 BTU burner

B. Surface burner cap

C. Left surface burner grate

D. 6,000 BTU burner (9,100 BTU burner

on 30" [76.2 cm] models)

E.Model and serial number plate

(under cooktop)

F. 9,100 BTU burner

(on 36" [91.4 cm] models only)

G. Center grate

H. 12,500 BTU burner

I. Right surface burner grate

J. 6,000 BTU burner

K. Control panel

Model KG00766 (36" [91.4 cm] shown)

Model KGCC706 (30" [76.2 cm] not shown)

Control Panel

OFF

Lite

OFF

...................................E

A. Left front burner control knob

B. Control knob off position

Cooktop

B OFF

C. Left rear burner control knob

D. Center rear burner control knob

(on 36" [9!.4 cm] models only)

F G

OFF

E. Right rear burner control knob

F Right front burner control knob

A. 17,000 BTU burner

B. Surface burner cap

C. Left surface burner grate

D. 6,000 BTU burner (9,100 BTU burner

on 30" [72.6 cm] models)

E.Model and serial number plate

(under cooktop)

F. 9,100 BTU burner

(on 36" [91.4 cm] models only)

G. Center grate

H. 12,500 BTU burner

I. Right surface burner grate

J. 6,000 BTU burner

K. Control panel

COOKTOP USE

Fire Hazard

Do not let the burner flame extend beyond the edge of

the pan.

Turn off all controls when not cooking.

Failure to follow these instructions can result in death

or fire.

IMPORTANT: Your cooktop is factory-set for use with Natural

Gas. If you wish to use LP Gas, an LP Gas Conversion Kit is

included with your new cooktop. See the instructions included

with the LP Gas Conversion Kit for details on making this

conversion.

Electric igniters automatically light the surface burners when

control knobs are turned to LITE.

The large burners (17,000 BTU [British Thermal Units] and

12,500 BTU) provide the highest heat setting, and are ideal for

cooking large quantities of food or liquid, using large pots and

pans. The small burners (9,100 BTU and 6,000 BTU) allow more

accurate simmer control at the lowest setting, and are ideal for

cooking smaller quantities of food, using smaller pots and pans.

Before setting a control knob, place filled cookware on the grate.

Do not operate a burner while using empty cookware or without

any cookware on the grate.

NOTE: Visually check that the burner has lit. If the burner does

not ignite, listen for a clicking sound. Ifyou do not hear the igniter

click, turn off the burnen Check for a tripped circuit breaker or

blown household fuse.

Check that the control knob is pressed completely down on the

valve shaft. If the spark igniter still does not operate, call a trained

repair specialist.

Proper grounding and polarity are necessary for correct operation

of the electric ignition system. If the wall receptacle does not

provide correct polarity, the igniter will become grounded and

occasionally click, even after the burner has ignited. Contact a

trained repair specialist to check the wall receptacle to see if it is

wired with the correct polarity.

To Set:

1. Push in and turn knob counterclockwise to LITE.

All surface burners will click. Only the burner with the control

knob turned to LITE will produce a flame.

2. Turn knob anywhere between HI and LO. Use the following

chart as a guide when setting heat levels.

SETTING RECOMMENDED USE

Lite • Light the burner.

Hi • Start food cooking.

• Bring liquid to a boil.

Medium High • Hold a rapid boil.

Between Med & Hi

• Quickly brown or sear food.

Med • Fry or saute foods.

Medium

• Hold a slow boil.

Medium Low • Cook soups, sauces and gravies.

Between Meal & Lo

• Stew or steam foods.

Lo • Keep food warm.

• Simmer.

I EMEMBER: When cooktop is in use, the entire cooktop

area may become hot.

IMPORTANT: Do not obstruct the flow of combustion and

ventilation air around the burner grate edges.

Before cleaning, make sure all controls are off and the cooktop is

cool, Do not use oven cleaners, bleach or rust removers.

Burner cap: Always keep the burner cap in place when using a

surface burner. A clean burner cap will help prevent poor ignition

and uneven flames. Always clean the burner cap after a spillover

and routinely remove and clean the caps according to the

"General Cleaning" section.

...................c

/ .....................D

A. Bumer cap

B. Alignment pins

C. Igniter

D. Burner base

E. Gas tube opening

Gas tube opening: Gas must flow freely throughout the gas tube

opening for the burner to light properly. Keep this area free of soil

and do not allow spills, food, cleaning agents or any other

material to enter the gas tube opening. Protect it from spillovers

by always using a burner cap.

Clean clogged burner ports with a straight pin as shown. Do

not enlarge or distort the port. Do not use a wooden

toothpick. If the burner needs to be adjusted, contact a

trained repair specialist.

Replace the burner cap, making sure the alignment pins on

the cap are properly aligned with the burner base.

A. Incorrect

B. Correct

5. Turn on the burner. Ifthe burner does not light, check cap

alignment. Ifthe burner still does not light, do not service the

sealed burner yourself. Contact atrained repair specialist.

Surface Grates

The grates located on the left and right side of the cooktop

contain grooves. These grooves must always face inward toward

the control knob panel to hold the grates in place. On some

models, the middle grate must be placed in position first,

followed by the left and right grates.

A. 1-11/2'' (25-38mm)

B. Burner ports

Burner ports: Check burner flames occasionally for proper size

and shape as shown above. A good flame is blue in color, not

yellow. Keep this area free of soil and do not allow spills, food,

cleaning agents or any other material to enter the burner ports.

To Clean:

1. Remove the burner cap from the burner base and clean

according to "General Cleaning" section.

2. Clean the gas tube opening with a damp cloth.

A. Left grate

B. Middle grate

C. Groove

On model KGCV566, the grates are located near the outside

frame.

Locator Pin

On all models except for model KGCV566, the Iocator pin on the

grate must be positioned in the burner cap hole to hold the grate

in place.

A. Locator pin

B. Burner cap

Wiping off the cooktop before and after each use will help keep it

free from stains. For more information, see "General Cleaning"

section,

• Do not store jars or cans above the cooktop. Dropping a

heavy or hard object onto the cooktop could crack the

ceramic glass.

For foods containing sugar in any form, clean up all spills and

soils as soon as possible. Allow the cooktop to cool down

slightly. Then, while wearing oven mitts, remove the spills

while the surface is still warm. If sugary spills are allowed to

cool down, they can adhere to the cooktop and can cause

pitting and permanent marks.

• Do not allow objects that could melt, such asplastic or

aluminum foil, to touch any part ofthe entire cooktop.

• Make sure the bottoms of pots and pans are clean and dry

before using them. Residue and water can leave deposits

when heated.

When canning for long periods, alternate the use of surface

cooking areas, elements or surface burners between batches.

This allows time for the most recently used areas to cool.

• Center the canner on the grate or largest surface cooking

area or element. On electric cooktops, canners should not

extend more than 1/2"(1.3 cm) beyond the surface cooking

area or element.

• Do not place canner on 2 surface cooking areas, elements or

surface burners at the same time.

• For more information, contact your local agricultural

department. Companies that manufacture home canning

products can also offer assistance.

IMPORTANT: Do not leave empty cookware on a hot surface

cooking area, element or surface burner.

Ideal cookware should have a flat bottom, straight sides, a well-

fitting lid and the material should be of medium-to-heavy

thickness.

Rough finishes may scratch the cooktop. Aluminum and copper

may be used as a core or base in cookware. However, when used

as a base they can leave permanent marks on the cooktop or

grates.

Cookware material is afactor in how quickly and evenly heat is

transferred, which affects cooking results. A nonstick finish has

the same characteristics as its base material. For example,

aluminum cookware with a nonstick finish will take on the

properties of aluminum.

Use the following chart as a guide for cookware material

characteristics.

COOKWARE CHARACTERISTICS

Aluminum • Heats quickly and evenly.

• Suitable for all types of cooking.

• Medium or heavy thickness is best for

most cooking tasks.

Cast iron • Heats slowly and evenly.

• Good for browning and frying.

• Maintains heat for slow cooking.

Ceramic or • Follow manufacturer's instructions.

Ceramic glass • Heats slowly, but unevenly.

• Ideal results on low to medium heat

settings.

Copper • Heats very quickly and evenly.

Earthenware • Follow manufacturer's instructions.

• Use on low heat settings.

Porcelain • See stainless steel or cast iron.

enamel-on-

steel or cast

iron

Stainless steel • Heats quickly, but unevenly.

• A core or base of aluminum or copper

on stainless steel provides even

heating.

COOKTOP CARE

IMPORTANT: Before cleaning, make sure all controls are off and

cooktop is cool. Always follow label instructions on cleaning

products.

Soap, water and a soft cloth or sponge are suggested first unless

otherwise noted.

STAINLESS STEEL

Do not use soap-filled scouring pads, abrasive cleaners, Cooktop

Polishing Creme, steel-wool pads, gritty washcloths or some

paper towels. Damage may occur to the product finish.

Cleaning Method:

Rub in direction of grain to avoid damaging.

• KitchenAid _ Stainless Steel Cleaner & Polish (not included):

See "Assistance or Service" section to order.

Heavy soil, dark streaks, specks and discoloration

• Cooktop Cleaner or nonabrasive cleanser:

Rub product into soil with a damp paper towel or soft cloth.

Continue rubbing until white film disappears.

Burned-on soil

• Cooktop Cleaner and Cooktop Scraper:

Rub creme into soil with damp paper towel. Hold scraper as

flat as possible on surface and scrape. Repeat for stubborn

spots. Polish entire cooktop with creme and paper towel.

Metal marks from aluminum and copper

• Cooktop Cleaner:

Clean as soon as cooktop has cooled down. Rub creme into

surface with a damp paper towel or soft cloth. Continue

rubbing until white film disappears. The marks will not totally

disappear but after many cleanings become less noticeable.

• Liquid detergent or all-purpose cleaner:

Rinse with clean water and dry with soft, lint-free cloth.

• Vinegar for hard water spots.

CERAMIC GLASS

Do not use steel wool, abrasive powder cleansers, chlorine

bleach, rust remover or ammonia because damage may occur.

Cleaning Method:

Always wipe with a clean, wet cloth or sponge and dry thoroughly

to prevent streaking and staining.

Cooktop Cleaner is recommended for regular use to help prevent

scratches, pitting and abrasions, and to condition the cooktop. It

may be ordered as an accessory. See "Assistance or Service"

section to order.

A Cooktop Scraper is also recommended for stubborn soils, and

can be ordered as an accessory. See "Assistance or Service"

section to order. The Cooktop Scraper uses razor blades. Store

razor blades out of the reach of children.

Light to moderate soil

• Paper towels or clean damp sponge:

Clean while the cooktop is still warm. You may want to wear

oven mitts while cleaning the cooktop.

Sugary spills (jellies, candy, syrup)

• Cooktop Scraper:

Clean while the cooktop is still warm. You may want to wear

oven mitts while cleaning the cooktop.

Cooktop Cleaner and clean damp paper towel:

Clean as soon as cooktop has cooled down. Rub creme into

surface with a damp paper towel or soft cloth. Continue

rubbing until white film disappears.

Tiny scratches and abrasions

• Cooktop Cleaner:

Rub creme into surface with a damp paper towel or soft

cloth. Continue rubbing until white film disappears. Scratches

and abrasions do not affect cooking performance and after

many cleanings become less noticeable.

COOKTOP CONTROLS

Do not use steel wool, abrasive cleansers or oven cleaner.

Do not soak knobs.

When replacing knobs, make sure knobs are in the Off position.

On some models, do not remove seals under knobs.

Cleaning Method:

• Soap and water or dishwasher:

Pull knobs straight away from control panel to remove.

CONTROL PAN EL

Do not use abrasive cleaners, steel-wool pads, gritty washcloths

or some paper towels. Damage may occur.

Cleaning Method:

• Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on

panel.

• All Purpose Appliance Cleaner (not included):

See "Assistance or Service" section to order.

PORCELAIN-COATED GRATES AND CAPS

Food spills containing acids, such as vinegar and tomato, should

be cleaned as soon as the cooktop, grates and caps are cool.

These spills may affect the finish.

To avoid chipping, do not bang grates and caps against each

other or hard surfaces such as cast iron cookware.

Do not reassemble caps on burners while wet.

Cleaning Method:

• Nonabrasive plastic scrubbing pad and mildly abrasive

cleanser:

Clean as soon as cooktop, grates and caps are cool.

• Dishwasher (grates only, not caps):

Use the most aggressive cycle.

• Gas Grate & Drip Pan Cleaner (not included):

See "Assistance or Service" section to order.

SURFACE BURNERS

Sealed Burner models

See "Sealed Surface Burners" section.

SIMMER PLATE (on some models}

Do not clean in dishwasher.

Cleaning Method:

• Liquid detergent and water.

Wipe with damp cloth or sponge then rinse with clean water

and wipe dry.

• Mild-abrasive cleanser

Rub in the direction of the grain lines with a damp cloth or

sponge. Rinse thoroughly. Repeat if necessary.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Nothing will operate

• Is the power supply cord unplugged?

Plug into a grounded 3 prong outlet.

Has a household fuse blown, or has a circuit breaker

tripped?

Replace the fuse or reset the circuit breaker. If the problem

continues, call an electrician.

Surface burners will not operate

• Is this the first time the surface burners have been used?

Turn on any one of the surface burner knobs to release air

from the gas lines.

• Is the control knob set correctly?

Push in knob before turning to a setting.

• Are the burner ports clogged?

See "Sealed Surface Burners" section.

Surface burner flames are uneven, yellow and/or noisy

Are the burner ports clogged?

See "Sealed Surface Burners" section.

On models with caps, are the burner caps positioned

properly?

See "Sealed Surface Burners" section.

Is propane gas being used?

The appliance may have been converted improperly.

Contact a service technician or see "Assistance or Service"

section.

Surface burner makes popping noises

• Is the burner wet?

Let it dry.

Excessive heat around cookware on cooktop

• Is the cookware the proper size?

Use cookware about the same size as the surface cooking

area, element or surface burner. Cookware should not extend

more than 1/2"(1.3 cm) outside the cooking area.

Cooktop cooking results not what expected

• Is the proper cookware being used?

See "Cookware" section.

• Is the control knob set to the proper heat level?

See "Cooktop Controls" section.

• Is the appliance level?

Level the appliance. See the Installation Instructions.

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check

"Troubleshooting." It may save you the cost of a service call. If

you still need help, follow the instructions below.

When calling, please know the purchase date and the complete

model and serial number of your appliance. This information will

help us to better respond to your request.

Accessories U.S.A.

To order accessories, call the KitchenAid Customer eXperience

Center toll free at 1-800-442-9991 and follow the menu prompts.

Or visit our website at www.kitchenaid.com and click on "Shop-

Online," then "Accessories." Portable appliances, bakeware,

cookware, gadgets and textiles are also available.

If you need replacement parts

If you need to order replacement parts, we recommend that you

use only factory specified parts. These factory specified parts will

fit right and work right because they are made with the same

precision used to build every new KITCHENAID ® appliance.

To locate factory specified parts in your area, call us or your

nearest KitchenAid designated service center.

Cooktop Cleaner

(ceramic glass models)

Order Part Number 31464

Cooktop Protectant

(ceramic glass models)

Order Part Number 31463

Call the KitchenAid Customer eXperience Center toll free:

1-800-422-1230.

Our consultants provide assistance with:

• Features and specifications on our full line of appliances.

• Installation information.

• Accessory and repair parts sales.

• Specialized customer assistance (Spanish speaking, hearing

impaired, limited vision, etc.).

Referrals to local dealers, repair parts distributors, and

service companies. KitchenAid designated service

technicians are trained to fulfill the product warranty and

provide after-warranty service, anywhere in the United States.

To locate the KitchenAid designated service company in your

area, you can also look in your telephone directory Yellow

Pages.

For further assistance

If you need further assistance, you can write to KitchenAid with

any questions or concerns at:

KitchenAid Brand Home Appliances

Customer experience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

Cooktop Scraper

(ceramic glass models)

Order Part Number WA906B

KitchenAid _Stainless Steel Cleaner & Polish

(stainless steel models)

Order Part Number 8171420

Gas Grate & Drip Pan Cleaner

Order Part Number 31617

All-Purpose Appliance Cleaner

Order Part Number 31662

Please call the KitchenAid Canada Customer Interaction Centre

toll free: 1-800-807-6777.

Our consultants provide assistance with:

• Features and specifications on our full line of appliances.

• Use and maintenance procedures.

• Accessory and repair parts sales.

• Referrals to local dealers, repair parts distributors, and

service companies. KitchenAid Canada designated service

technicians are trained to fulfill the product warranty and

provide after-warranty service, anywhere in Canada.

For further assistance

If you need further assistance, you can write to KitchenAid

Canada with any questions or concerns at:

Customer Interaction Centre

KitchenAid Canada

1901 Minnesota Court

Mississauga, Ontario L5N 3A7

Please include a daytime phone number in your correspondence.

KITCHENAID ®COOKTOP WARRANTY

ONE YEAR LIMITED WARRANTY

For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or

furnished with the product, KitchenAid or KitchenAid Canada (hereafter "KitchenAid') will pay for factory specified parts and repair

labor to correct defects in materials or workmanship. Service must be provided by a KitchenAid designated service company.

SECOND THROUGH FIFTH YEAR LIMITED WARRANTY ON CERTAIN COMPONENT PARTS

In the second through fifth years from the date of purchase, when this appliance is operated and maintained according to instructions

attached to or furnished with the product, KitchenAid or KitchenAid Canada will pay for factory specified parts for the following

components if defective in materials or workmanship:

• Electric elements

• Gas burners

• Solid statetouch control system parts

• Any cracking of the rubber seal between the ceramic glass cooktop and porcelain edge

• Any cracking due to thermal shock of the ceramic glass cooktop

• Surface unit elements

ITEMS KITCHENAID WILL NOT PAY FOR

1. Service calls to correct the installation of your major appliance, to instruct you how to use your major appliance, to replace or repair

house fuses or to correct house wiring or plumbing.

2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Those consumable parts are excluded from warranty

coverage.

3. Repairs when your major appliance is used for other than normal, single-family household use.

4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in

accordance with electrical or plumbing codes, or use of products not approved by KitchenAid.

5. Replacement parts or repair labor costs for units operated outside the United States or Canada.

6. Pickup and delivery. This major appliance is designed to be repaired in the home.

7. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

8. Expenses for travel and transportation for product service in remote locations.

9. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not installed in accordance with

published installation instructions.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED

HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,

ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. KITCHENAID SHALL NOT BE LIABLE FOR

INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION

OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES

YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATETO STATE OR PROVINCE

TO PROVINCE.

Outside the 50 United States and Canada, this warranty does not apply. Contact your authorized KitchenAid dealer to determine if

another warranty applies.

If you need service, first see the "Troubleshooting" section of the Use & Care Guide. After checking "Troubleshooting," additional help

can be found by checking the "Assistance or Service" section or by calling KitchenAid. In the U.S.A., call 1-800-422-1230. In Canada,

call 1-800-807-6777. 9/05

Keep this book and your sales slip together for future

reference. You must provide proof of purchase or installation

date for in-warranty service.

Write down the following information about your major appliance

to better help you obtain assistance or service if you ever need it.

You will need to know your complete model number and serial

number. You can find this information on the model and serial

number label located on the product.

Dealer name

Address

Phone number

Model number

Serial number

Purchase date

P P

SECURITE DE LA TABLE DE CUISSON

Votre s6curit6 et celle des autres est trbs importante.

Nous donnons de nombreux messages de securite importants dans ce manuel et sur votre appareil menager. Assurez-vous de

toujours lire tousles messages de securite et de vous y conformer.

Voici le symbole d'alerte de securit&

Ce symbole d'alerte de securite vous signale les dangers potentiels de deces et de blessures graves & vous

et & d'autres.

Tousles messages de securite suivront le symbole d'alerte de securite et le mot "DANGER" ou

"AVERTISSEMENT". Ces mots signifient :

Risque possible de deces ou de blessure grave si vous ne

euivez pas immediatement lee instructions.

Risque possible de deces ou de blessure grave si vous

ne euivez pas lee instructions.

Tousles messages de securite vous diront quel est le danger potentiel et vous disent comment reduire le risque de blessure et

ce qui peut se produire en cas de non-respect des instructions.

AVERTISSEMENT : Pour votre s6curit6, les renseignements dans ce manuel doivent

_tre observ6s pour r6duire au minimum les risques d'incendie ou d'explosion ou pour

6viter des dommages au produit, des blessures ou un d6cbs.

- Ne pas entreposer ni utiliser de I'essence ou d'autres vapeurs ou liquides inflammables

proximit6 de cet appareil ou de tout autre appareil 61ectrom6nager.

- QUE FAIRE DANS LE CAS D'UNE ODEUR DE GAZ :

• Ne pas tenter d'allumer un appareil.

• Ne pas toucher a un commutateur 61ectrique.

• Ne pas utiliser le t616phone se trouvant sur les lieux.

• Appeler imm6diatement le fournisseur de gaz d'un t616phone voisin. Suivre

ses instructions.

• A d6faut de joindre votre fournisseur de gaz, appeler les pompiers.

- L'installation et I'entretien doivent _tre effectu6s par un installateur qualifi6, une agence

de service ou le fournisseur de gaz.

IMPORTANTES iNSTRUCTiONS DE Si CURITi

AVERTISSEMENT : Pour reduire le risque d'incendie, de [] Debrancher I'alimentation electrique avant d'executer des

choc electrique, de blessures ou de dommages lots de

I'utilisation de la table de cuisson, il convient d'observer

certaines precautions elementaires dont les suivantes :

[] MISE EN GARDE - Ne pas remiser darts des

armoires au-dessus de la table de cuisson, des objets que

des enfants pourraient vouloir atteindre. Les enfants

pourraient se blesser gravement en grimpant sur la table

de cuisson.

[] Installation appropriee - La table de cuisson Iorsqu'elle est

correctement installee dolt _tre reliee & la terre

conformement aux codes Iocaux ou, en I'absence de codes

Iocaux, selon le Code national #lectrique, ANSI/NFPATO ou

le Code canadien des installations #lectriques, Partie 1.

S'assurer que la table de cuisson est correctement

installee et reliee & la terre par un technicien qualifi&

[] La table de cuisson est munie d'une fiche de liaison & la

terre & trois broches pour votre protection contre les

risques de choc electrique et dolt &tre branchee

directement darts une prise de courant bien reliee & la

terre. Ne pas couper ni enlever la broche de liaison & la

terre de cette fiche.

reparations & la table de cuisson.

[] Ne pas utiliser la table de cuisson comme source de

chauffage ou de rechauffage d'une piece.

[] Des blessures peuvent survenir du mauvais usage de la

table de cuisson tel que se tenir debout sur la surface, se

pencher ou s'asseoir sur le dessus de la surface.

[] Entretien - Garder I'espace autour de la table de cuisson

degage et exempt de mat@iaux combustibles, d'essence

et d'autres vapeurs et liquides inflammables.

[] Remisage sur la table de cuisson - Des produits

inflammables ne doivent pas _tre remises sur ou pres des

elements de surface.

[] La taille de la flamme des brOleurs de surface devrait _tre

ajustee de sorte qu'elle ne depasse pas le bord d'un

ustensile de cuisson.

CONSERVEZ CES INSTRUCTIONS

PIECES ETCARACTERIS QUES

Ce manuel couvre plusieurs modeles differents, et tousles modeles ne sont pas illustres. La table de cuisson que vous avez achetee

peut comporter tousles articles enum@es ou seulement certains d'entre eux. L'emplacement et I'apparence des caracteristiques

illustrees peuvent ne pas correspondre & ceux de votre modele. Toutes les caracteristiques BTU illustrees correspondent au gaz naturel

sauf mention differente.

ModUle KGCV566 (36" [91,4 cm] illustr6)

Tableau de commande

OFF OFF OFF

_' _' ..................................E

OFF

B .................................

A .... @

A. Bouton de commande du brOleur

avant gauche

B. Bouton de commande a la position

Off (arr_t)

Table de cuisson

OFF

...........F

C. Bouton de commande du brOleur

arriere gauche

D. Bouton de commande du brOleur

arriere central

F G

E. Bouton de commande du brOleur

arriere droit

F Bouton de commande du brOleur

avant droit

_! ........ H

A. BrOleur de 17 000 BTU

B. Chapeau du brOleur de surface

C. Grille de brQleur de surface gauche

D. BrQleur de 6 000 BTU

E. Plaque signal6tique des num6ros

de modele et de s6rie

(sous la table de cuisson)

F. BrOleur de 9 100 BTU

G. Grille centrale

H. BrOleur de 6 000 BTU

I. Grille de brOleur de surface droit

J. BrOleur de 17 000 BTU

K. Tableau de commande

ModUle KGCC566 (36" [91,4 cm] illustr_)

ModUle KGCC506 (30" [76,2 cm] non illustr_)

Tableau de commande

OFF

Lite

OFF

..................................E

B .................. OFF

A. Bouton de commande du brOleur

avant gauche

B. Bouton de commande b la position

Off (arr_t)

C. Bouton de commande du brOleur

arriere gauche

D. Bouton de commande du brOleur

arriere central (sur les modeles de

36" [9!,4 cm] seulement)

Table de cuisson

F G

E _-

OFF

E. Bouton de commande du brOleur

arriere dreit

F Bouton de commande du brOleur

avant droit

A. BrOleur de 17000 BTU

B. Chapeau du brOleur de surface

C. Grille de brOleur de surface gauche

D. BrOleur de 6 000 BTU (brOleur de 9 100

BTU sur les modeles de 30" [76,2 cm])

E. Plaque signal_tique des num_ros de

modele et de s_rie (sous la table de

CUiSSOn)

F BrOleur de 9 100 BTU (sur les

medeles de 36" [9!,4 cm] seulement)

G, Grille centrale

H. BrOleur de 12 500 BTU

L Grille de brOleur de surface droit

J. BrOleur de 6 000 BTU

K. Tableau de commande

ModUle KGCC766 (36" [91,4 cm] illustr_)

ModUle KGCC706 (30" [76,2 cm] non illustr_)

Tableau de commande

iioFF

Lite

OFF

...................................E

B OFF

A. Bouton de commande du brOleur

avant gauche

B. Bouton de commande a la position

Off (arr_t)

C. Bouton de commande du brOleur

arriere gauche

D. Bouton de commande du brOleur

arriere central (sur les modeles de

36" [9!,4 cm] seulement)

Table de cuisson

F G

OFF

E. Bouton de commande du brOleur

arriere droit

F. Bouton de commande du brOleur

avant dreit

A. BrOleur de 17 OOOBTU

B. Chapeau du brOleur de surface

C. Grille de brOleur de surface gauche

D. BrOleur de 6 O00 BTU (brOleur de 9 100

BTU sur les modeles de 30" [72,6 cm])

E. Plaque signal_tique des num_ros de

modele et de s_rie (sous la table de

cuissoR)

F. BrQleur de 9 100 BTU (sur les modeles

de 36" [91,4 cm[ seulement)

G. Grille centrale

H. BrOleur de 12 500 BTU

I.Grille de brOleur de surface droit

J. BrDleur de 6000 BTU

K. Tableau de commande

UTILISATION DE LA TABLE DE CUISSON

Risque d'incendie

La flamme d'un brQleur ne devrait pas depasser le bord

du recipient de cuisson.

Fermer tous les reglages Iorsque la cuisson est

terminee.

Le non-respect de ces instructions peut causer un

deces ou un incendie.

IMPORTANT : Cette table de cuisson a ete configuree a I'usine

pour I'alimentation au gaz naturel. Si vous souhaitez utiliser du

gaz propane, une trousse de conversion au gaz propane est

fournie avec la table de cuisson. Voir les instructions incluses

avec la trousse de conversion au gaz propane pour des details

sur la realisation de cette conversion.

Des allumeurs electriques allument automatiquement les brQleurs

de surface Iorsque les boutons de commande sont tournes

LITE.

Les grands brOleurs (17 000 BTU [unites thermales britanniques]

et 12 500 BTU) fournissent le reglage de chaleur le plus elev6 et

sent ideals pour faire cuire de grandes quantites d'aliments ou de

liquides, en utilisant de grandes marmites et casseroles. Les

petits brQleurs (9 100 BTU et 6 000 BTU) permettent un contr61e

plus precis du mijotage au reglage le plus bas et sent ideals pour

la cuisson de plus petites quantites d'aliments, en utilisant des

marmites et casseroles plus petites.

Avant de regler un bouton de commande, placer I'ustensile de

cuisson rempli sur la grille. Ne pas faire fonctionner un brQleur

avec un ustensile de cuisson vide ou sans ustensile de cuisson

sur la grille.

REMARQUE :Verifier visuellement que le brQleur est allum& Si le

brQleur ne s'allume pas, guetter le declic. Si aucun declic ne se

fait entendre, eteindre le brQleur. Verifier si le disjoncteur s'est

declenche ou si un fusible est grill&

Verifier que le bouton de commande est completement enfonce

sur la tige de la soupape. Si I'allumeur ne fonctionne toujours

pas, appeler un technicien de reparation qualifi&

La liaison a la terre et la polarite appropriees sent necessaires

pour le bon fonctionnement du systeme d'allumage electrique. Si

la prise de courant murale ne fournit pas la polarite correcte,

I'allumeur deviendra relie a la terre et pourra occasionnellement

emettre un declic, m_me apres I'allumage du brQleur. Faire

verifier la prise murale par un technicien de reparation qualifie

pour voir si la polarite du c&blage est correcte.

R6glage :

1. Pousser et tourner le bouton dans le sens antihoraire a LITE.

Tousles brQleurs de surface emettront un declic. Seul le

brQleur dent le bouton est tourne a LITE produira une flamme.

2. Tourner le bouton n'importe ou entre HI et LO. Utiliser le

tableau suivant comme guide Iors du reglage des niveaux de

chaleur.

REGLAGE UTILISATION REOOMMANDEE

Lite (allumage) • Pour allumer le brQleur.

Hi (61ev6)

• Pour commencer la cuisson des

aliments.

• Pour porter un liquide & ebullition.

Medium High

(moyen 61ev_)

Entre Med et Hi

• Pour maintenir une ebullition

rapide.

• Pour brunir ou saisir rapidement

les aliments.

Med • Pour faire frire ou sauter les

Medium (moyen) aliments.

• Pour maintenir une ebullition

lente.

Medium Low • Pour cuire les soupes et les

(moyen bas) sauces.

Entre Med et Lo

• Pour mijoter ou etuver les

aliments.

Lo (bas) • Pour garder les aliments au

chaud.

• Pour faire mijoter lentement.

I N'OUBLIEZ PAS : Quand I'appareil est utilise, toute la

surface de la table de cuisson peut devenir chaude.

La page charge ...

KitchenAid KGCC506RWW01 Le manuel du propriétaire

Marque: KitchenAid

Modèle: KGCC506RWW01

Catégorie: Cuisinières

Taper: Le manuel du propriétaire

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: KitchenAid KGCC506RWW01 Owner's manual

KitchenAid KGCC506RWW01 Le manuel du propriétaire

Ce manuel convient également à

KitchenAid KGCC506RWW01 Le manuel du propriétaire

dans d''autres langues

Documents connexes