SportsArt S958 Le manuel du propriétaire
- Catégorie
- Fitness, gymnastique
- Taper
- Le manuel du propriétaire
Sports Art Industrial Co., Ltd. TUV-CERT ISO 9001/9002/14000 Certied Quality Products 2013.08.12
S958 Leg Curl
Owner’s Manual
S958 OWNER’S MANUAL CONTENTS
1. INTRODUCTION ................................................................................ 2
2. SAFETY PRECAUTIONS .................................................................. 3
3. LIST OF PARTS ................................................................................. 4
4. ASSEMBLE THE PRODUCT ............................................................. 6
STEP 1 Install the Main Frame .............................................................. 6
STEP 2 Install the Leg Cushion ............................................................. 7
STEP 3 Install the Handle ...................................................................... 8
STEP 4 Install the Weight Stack Covers ................................................ 9
STEP 5 Install the Storage Tray Holder ................................................. 10
STEP 6 Belt Tension Adjustment Instructions ........................................ 11
STEP 7 Minor Weight Stack Instructions ............................................... 12
5. OPERATE THE PRODUCT ............................................................... 13
OPERATION Operate the Product ........................................................ 13
6. MAINTENANCE ................................................................................ 15
MAINTENANCE Machine Maintenance ................................................ 15
MAINTENANCE Schedule .................................................................... 17
MAINTENANCE Task List .................................................................... 18
MAINTENANCE One-Year Maintenance Log ....................................... 19
7. CONSIGNES DE SÉCURITÉ IMPORTANTES ................................. 20
2
1. INTRODUCTION
Congratulations on the purchase of a high quality SportsArt product, the S958
Leg Curl machine. Constructed of high quality materials and designed for years of
reliable performance, this product was made for full commercial use.
Before this product is assembled or operated, we recommend that you familiarize
yourself with this manual. Understanding the correct assembly and operation of
this product will help ensure that exercisers obtain their tness goals safely and
successfully.
3
2. SAFETY PRECAUTIONS
This product was designed and built for optimum safety. However certain
precautions apply during the use of this product. Please note the following safety
precautions:
• Please read the entire manual before assembly and operation. Make
sure the product is installed and operated as instructed in this manual.
• Assemble and operate the product on a solid, level surface. Do not use
outdoors or near water, including pools and saunas.
• Check the product before every use. Make sure all parts are assembled,
and all fasteners are tightened. Do not use the product if it is disassembled
in any way.
• Wear proper workout clothing. Do not wear loose clothing. Do not wear
shoes with leather soles or high heels. Tie all long hair back. Do not go
barefoot on this product.
• Keep away from moving parts. Moving parts may or may not stop
immediately if an object becomes caught or impedes normal motion.
• Use this product only for its intended purpose as described in this manual.
• Be careful when mounting and dismounting the unit.
• Never operate this product if it has been damaged in any way. If it is
not working properly, or has been dropped or damaged, contact a service
technician for repairs.
• Do not use accessories that are not specically recommended by the
manufacturer. Such parts might cause injuries or cause the unit to fail.
• This product is not intended for use by persons (including children) with
reduced physical, sensory, or mental capabilities, or by people who are
otherwise decient in product knowledge or experience. If such people use
this product, they should be given training and be supervised at all times by
someone responsible for their safety.
• Children should be supervised to ensure that they do not play on or near
the product.
• The user weight limit for this product is 227 kg, 500 lb.
CAUTION: If you feel any pain or any abnormal sensations, STOP YOUR
WORKOUT and consult your physician immediately. Work within your
recommended exercise level. DO NOT work to exhaustion. Before beginning
any exercise program, you should consult with your doctor. It is recommended that
you undergo a complete physical examination.
*NOTE: Regarding the decaled resistance on the unit weight stack, the
actual weight being lifted is configured at a ratio of 2.5:1. Example: If the
stack fork is engaged at 60KG (132LB) at the weight stack, the actual pulling
weight is 24KG (53LB).
4
3. LIST OF PARTS
Assembly Parts
No. Name Qty. No. Name Qty.
A1 Weight Stack Frame 1 A7 Dual 80 Oval Foot Cover A 1
A2 Sub Frame 1 A8 Dual 80 Oval Foot Cover B 1
A3 Leg Cushion 1 A9 118 Oval Foot Cover A 1
A4
Handle
1 A10
118 Oval Foot Cover B
1
A5 Weight Stack Front Cover 1 A11 Storage Tray 1
A6 Weight Stack Back Cover 1
5
Components in the Hardware Kit
No. Name Qty. Specication Notes
10
Cover Cork 1 D23*t8.8
11 Push revits 4
L-shaped Allen wrench 1 M5
L-shaped Allen wrench 1 M6
Double open-end wrench 1 8*17
Double open-end wrench 1 17*23
Components on the Product
No. Name Specication Notes
20
Hex head screws M10*P1.5*L30
Spring washer M10
Washer D16*d10.2*t1.0
Nylon hex nut M10*P1.5
21 Round head hex screws M8*P1.25*L20
22
Round head hex screws M8*P1.25*L20
Handrail washer D18*d8.5*t2
23
Plastic round head hex socket
screws
M6*P1.0*L20
6
4. ASSEMBLE THE PRODUCT
Follow instructions below to assemble this product. Note that in this manual
the words “left” and “right” are used to refer to the product and its parts. As
such, these designations correspond to the “left” and “right” sides of a person
in position to exercise on this product. Also, for brevity, the word “screws” or
“nuts” is used where washers and other hardware may be involved.
STEP 1 Install the Main Frame
(a). Please remove screws (20) from the weight stack frame (A1) and the sub
frame (A2).
(b). Connect both weight stack frame (A1) and the sub frame (A2) and use
screws (20) to secure the assembly.
7
STEP 2 Install the Leg Cushion
(a). Remove the screws (21) from the leg cushion (A3).
(b). Shown below, connect the rotational connector of the leg cushion (A3)
to the weight stack frame (A1). Use screws (21) to secure the assembly and
then cover it with cork cover (10).
Note: When installing the back cushion, make sure the rotational connector
is align with the selecting hole before securing the assembly.
8
STEP 3 Install the Handle
(a). Remove the screws (22) from the sub frame (A2).
(b). Attach the handle (A4) onto the sub frame (A2), then use screws (22) to
secure the assembly.
9
STEP 4 Install the Weight Stack Covers
(a). Attach both front and back weight stack covers (A5)(A6) onto the weight
stack frame (A1). (Note: before the attaching the front weight stack cover
(A5), make sure the inside hanger is hooked to the frame before securing it
to the weight stack frame.)
(b). Attach the oval foot covers (A7)(A8)(A9)(A10) onto the sub frame (A2)
legs. Align the ends before use push revits (11) to secure the foot covers
together.
Note: While installing the oval foot covers, if the holes don’t match up, please
change the direction of the covers. The cutout should face the inner side of
foot tube.
10
STEP 5 Install the Storage Tray Holder
Please follow the instructions (a) through (b) to install the storage tray
(a). Locate the position where the storage tray (A11) attaches to the weight
stack frame (A1), then remove the screws (23) from the weight stack frame.
(b). Attach the storage tray (A11) to the weight stack frame (A1) and use
screws (23) to secure the assembly.
11
STEP 6 Belt Tension Adjustment Instructions
1. After the installation and the final positioning of the machine, make the
appropriate adjustments to ensure that the machine is working.
2. If the belt is too tight or too loose, first loosen nut A as shown then adjust
nut B. If the belt length is too long, adjust downward; if the belt length is too
short, adjust upward. Adjust the belt to the proper position, then tighten nut
A to secure the belt length.
Note: After adjusting the belt, the gap between nut A and B must be within
35mm(1.4”). If the gap still exceeds the 35mm limit after the first step, you
need to:
A. Loosen the screws on C and adjust the belt to the proper length.
B. Tighten the screws on C.
3. After the adjustment, then the machine should be tested to determine the
functionality of the machine.
12
STEP 7 Minor Weight Stack Instructions
To adjust the minor weight stack, insert the upper pin to add 3.5Lbs/1.5kgs
or the lower pin to add 6.5Lbs/3kgs. When the minor weights are not in use,
pull the pin to release the weight.
13
OPERATION Operate the Product
(a). The rotator adjusting pin is used for adjusting the rotator to the proper
initial position for the user. Shown in area (A).
(b). The leg cushion adjusting pin is used for user to adjust the leg cushion to
the proper position. Shown in area (B). Make sure the leg cushion is secure
in position before excercising.
5. OPERATE THE PRODUCT
14
OPERATION Operate the Product
(c). To adjust the user’s movement range, please adjust the rotation positioning
pin in area (C)
15
6. MAINTENANCE
This section covers maintenance topics and includes a maintenance
schedule, task list, and log.
MAINTENANCE Machine Maintenance
1. Please clean and lubricate the guide rod once a week.
(a). Use a clean, lint-free towel to apply the lubricant onto the guide rods.
(b). Test the weight stack on the guide rod and make sure the operation is
smooth.
(c). Repeat operations (a) and (b) 2 to 3 times.
2. Check the tightness of the cable or belt and follow the steps to make
adjustments.
16
MAINTENANCE Machine Maintenance
IMPORTANT NOTE
1. Once the machine belt reaches the warranty period, it is recommended to
replace the belt.
2. Belt safety check, after a year in use, check belt weekly. Depend on the
use conditions, increase the frequency of inspections.
(As shown: (A) a belt, (B) the belt extension)
During inspection, if found cracks in the belt or the belt is exposed to other
unusual circumstances, please immediately stop using the machine and
replace the belt.
17
MAINTENANCE Schedule
Area Day Week Month Quarter Year Notes
1 Exterior Clean.
2 Screws Inspect for looseness
and secure if necessary.
3 Testing To conrm that the
machine is working
properly
4 Cushions Wipe with a damp cloth.
5 Belt Check for damage or
wear. If so, need for
replacement.
6 Guide Rod Clean and lubricate.
18
MAINTENANCE Task List
Like cars, fitness products require maintenance. Regular maintenance ex-
tends product life, and failure to maintain products can void the manufac-
turer’s warranty. Copy the maintenance log sheet, and record maintenance
work for each fitness product.
Daily tasks
1. Use a clean, lint-free towel to wipe down the product exterior.
2. Inspect all screws. Secure if necessary.
3. Make sure the machine is working properly.
4. Wipe cushions clean with a damp cloth.
Weekly tasks
1. Check the belt for damage or tear.
2. Clean and lubricate guide rods.
Caution
● Please follow standard safety precautions when working on this product.
● Do NOT use cleaners with alcohol, ammonia, or other damaging chemi-
cals. The use of such chemicals can damage the product and void the war-
ranty. Never spray or pour any liquid directly onto the product. Doing so can
damage components and void the warranty.
19
Daily Tasks Weeks 1-7 Weeks 8-14 Weeks 15-21 Week 22-28
Completed
Daily Tasks Week 29-35 Week 36-42 Week 43-49 Week 50-52
Completed
Weekly Tasks Weeks 1-7 Weeks 8-14 Weeks 15-21 Weeks 22-28
Completed
Weekly Tasks Weeks 29-35 Weeks 35-42 Weeks 43-49 Weeks 50-52
Completed
Monthly tasks 1 2 3 4 5 6 7 8 9 10 11 12
Completed
Quarterly Tasks Quarter 1 Quarter 2 Quarter 3 Quarter 4
Completed
Yearly Tasks Year 1
Completed
Notes: __________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
MAINTENANCE One-Year Maintenance Log
Facility:_______________________ Supervisor:____________________
Product model number:__________ Serial number:_________________
Start date: ____________________ End date:_____________________
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
SportsArt S958 Le manuel du propriétaire
- Catégorie
- Fitness, gymnastique
- Taper
- Le manuel du propriétaire
dans d''autres langues
- English: SportsArt S958 Owner's manual
Documents connexes
-
SportsArt S959 Le manuel du propriétaire
-
-
-
-
SportsArt S961 Le manuel du propriétaire
-
-
-
-
-