Jenn-Air JBRFL24IGX Guide d'installation

Taper
Guide d'installation

Ce manuel convient également à

 l
COLUMN REFRIGERATION
SINGLE UNIT
RÉFRIGÉRATEUR INTÉGRÉ EN COLONNE
COMPARTIMENT UNIQUE
W10918241A
IMPORTA NT SAFETY INSTRUCTIONS
WARNING:
To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:
SAVE THESE INSTRUCTIONS
To avoid a hazard due to instability of the appliance, it must
be fixed in accordance with the instructions.
Plug into a grounded 3 prong outlet.
Installation shall be performed only by manufacturer, or an
authorized agent.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Disconnect power before servicing.
Replace all parts and panels before operating.
Remove doors from your old refrigerator.
Use nonflammable cleaner.
Do not store or use petrol, flammable liquids or gas in the
vicinity of this or other electrical appliances. The fumes can
cause fires or explosions.
Do not store explosive substances such as aerosol cans
with a flammable propellant in this refrigerator.
Do not use or place electrical devices inside the refrigerator
compartments if they are not of the type expressly
authorized by the manufacture.
Use two or more people to move and install refrigerator.
Disconnect power before installing ice maker (on ice maker
kit ready models only).
A qualified service technician must install the water line and
ice maker. See installation instruction supplied with
ice maker kit IC13B for complete details.
Connect to a potable water supply only.
Use a sturdy glass when dispensing ice (on some models).
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
To avoid the risk of children becoming trapped and
suffocating, do not allow them to play or hide inside
the refrigerator.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified person
in order to avoid a hazard.
This refrigerator is intended to be used in household and
similar applications such as:
– staff kitchen areas in shops, offices, and other working
environments
– farm houses and by clients in hotels, motels, and other
residential type environments
– bed and breakfast type environments
– catering and similar non-retail applications
WARNING
Suffocation Hazard
Remove doors from your old refrigerator.
Failure to do so can result in death or
brain damage.
With the launch of the first ever JennAir
®
columns, we reimagined the entire columns
installation process, eliminating problems that affect our sub-par competitors. Some of
the features professional installers are most excited about:
Concealed six-point panel adjustment
Easy and precise alignment
Site-tailored Rotter system shims
Guide and keep column in position
Precision four-point front leveling
On sturdy rollers that easily bear full weight
Metal fascia
Increases durability
EASE. SPEED. SAFETY.
Solid wood core stainless steel panels
Easy to prep and hang and do not
require drilling through steel
Expanded utility areas
Reduced changes to replace built-ins
or upgrade from competitor columns
And with your help, we’ll just keep getting better.
Contact the JennAir Epicenter through jennair.com or at 1-800-JENNAIR (536-6247)
to report installation tips and tricks, or to consult with experts who know
the installation process inside and out.
INTRODUCTION 3
IMPORTANT: Child entrapment and
suffocation are not problems of the past.
Junked or abandoned refrigerators are still
dangerous – even if they will sit for "just a
few days." If you are getting rid of your old
refrigerator, please follow these instructions
to help prevent accidents.
Before You Throw Away Your Old
Refrigerator or Freezer:
■ Take off the doors.
Leave the shelves in place so that children
may not easily climb inside.
WHY WE LOVE
JENNAIR INSTALLERS
THEY’RE TOTAL PROFESSIONALS AND PERFECTIONISTS.
It’s all about getting that seamless flush execution, that down-to-the-
millimeter adjustment. Flawless installation is incredibly important to
the function, appearance and lifetime enjoyment of our products, and
our installers make it happen every day.
THEY DO THEIR HOMEWORK. AND HELP US WITH OURS.
These experts know JennAir
®
products inside and out. They train
extensively on JennAir installation, learning the latest techniques and
insider tips so they can install our cutting edge appliances with ease.
And we value their input, incorporating installer feedback to refine and
perfect our installations.
THEY THINK THROUGH EVERY DETAIL OF THE EXPERIENCE.
Above and beyond dedication is the baseline. The JennAir experience
starts the minute an installer brings the customer’s column home.
Keeping the site spotless, taking extreme care with both the appliances
and the home and providing an unforgettable introduction to columns
is all part of the game plan.
4 INTRODUCTION
TABLE OF CONTENTS
INTRODUCTION
02 SAFETY INSTRUCTIONS
06 TOOLS & PARTS
08 PRODUCT DIMENSIONS
10 OPENING DIMENSIONS
12 SITE PREP
PREPARATION
16 SECTION 1  COLUMN
21 SECTION 2  FURNITURE
COLUMN
28 SECTION 3  INSTALLATION
TOEKICK
36 SECTION 4  COLUMN PREPARATION
42 SECTION 5  CUSTOM WOOD
PREPARATION
46 SECTION 6  STAINLESS STEEL
PREPARATION
49 SECTION 7  ALIGNMENT
AND INSTALLATION
PANEL
55 SECTION 8 CUSTOM WOOD
PREPARATION
60 SECTION 9  STAINLESS STEEL
PREPARATION
63 SECTION 10  HANGING
AND ADJUSTMENT
COMPLETE
70 SECTION 11  COMPLETE INSTALLATION
APPENDIX
74 ADDITIONAL SHIM INFORMATION
WHY WE LOVE
JENNAIR INSTALLERS
INTRODUCTION 5
TABLE DES MATIÈRES
INTRODUCTION
76 INSTRUCTIONS DE SÉCURITÉ
80 OUTILS ET PIÈCES
82 DIMENSIONS DU PRODUIT
84 DIMENSIONS DE L’OUVERTURE
86 PRÉPARATION DE L’EMPLACEMENT
PRÉPARATION
90 SECTION1  RÉFRIGÉRATEUR
INTÉGRÉ EN COLONNE
95 SECTION2  MEUBLE
RÉFRIGÉRATEUR INTÉGRÉ
EN COLONNE
102 SECTION3  INSTALLATION
PLINTHE
110 SECTION4  PRÉPARATION
DE L’APPAREIL
116 SECTION5  PRÉPARATION DU
PANNEAU EN BOIS PERSONNALISÉ
120 SECTION6  PRÉPARATION DU
PANNEAU EN ACIER INOXYDABLE
123 SECTION7  ALIGNEMENT ET
INSTALLATION
PANNEAU
129 SECTION8  PRÉPARATION DU
PANNEAU EN BOIS PERSONNALISÉ
134 SECTION9  PRÉPARATION DU
PANNEAU EN ACIER INOXYDABLE
137 SECTION10  SUSPENSION ET
AJUSTEMENT
TERMINER
144 SECTION11  TERMINER
L’INSTALLATION
ANNEXE
148 INFORMATIONS SUPPLÉMENTAIRES
SUR LES CALES
TOOLS + PARTS
PROVIDED
#2 Square-drive screws
(3-24004-079)
8-18 x 3/4 Phillips head screws
(W11041176)
6-20 x .375 screws
(246131)
5 mm driver bit
(W11121505)
Four installation shims
(W10913387)
3 mm driver bit
(W11121512)
Shim installation template
(W11040585)
READ AND FOLLOW THE INSTRUCTIONS PROVIDED WITH
ANY OF THE TOOLS LISTED
6 INTRODUCTION
3MM
5MM
Toe-kick and door panel installation template
(W11040865)
3 mm Allen wrench
5 mm Allen wrench
Gripping pads
(W10840464)
TOOLS + PARTS
NOT PROVIDED
TOOLS
Cordless drill and drill bits or impact driver
Drill bit set including 3/32" and 1/8" diameter bits
Two adjustable wrenches
#2 Phillips bit
1/4" magnetic nut driver
#2 square-drive bit
48" or longer level or straight edge
3/8" and 1/2" open-end wrenches
Tape measure
Utility knife
Masking tape
Appliance dolly
Right angle drill adapter
6" drill extension
#8 pan head wood screws of assorted lengths
including 1", 1-1/4", 1-1/2"
PARTS
Flexible code-approved water supply line
Custom door overlay panels
Stainless steel panels: order from JennAir
Custom wood panels: consult a qualified
cabinetmaker or carpenter
Additional fasteners will be required according
to the kitchen furniture construction
This recommended process might be unfamiliar to you as an installer, but it adds
enormous value to both you and your client. Use the Rotter system to:
Help position column without scratching
Create precise 1/8" reveals on each side
Always have ready-made shims tailored to each site
Keep column stable in cutout over lifetime
Eliminate misalignment issues for your client
WHY USE
ROTTER
SYSTEM
SHIMS?
INTRODUCTION 7
9/32”
1/4”
3/16” 1/8”
1/16”
DIMENSIONS
PRODUCT
OVERALL PRODUCT NO PANEL
Width See unit width table below
Height 83-1/2" (212 cm)
Depth 23-7/8" (60.6 cm)
Raw Door Height 62-3/16" (157.9 cm)
Toe-kick Height 3-9/16" (9.1 cm)
Toe-kick Depth 3-1/4" – 4-7/8" (8.3 cm-12.4 cm)
PRODUCT WIDTH
Model Width
18"
JBZFR18IGX
JBZFL18IGX
17-3/4"
(45.1 cm)
24"
JBRFR24IGX
JBRFL24IGX
JBZFR24IGX
JBZFL24IGX
23-3/4"
(60.3 cm)
30"
JBRFR30IGX
JBRFL30IGX
JBZFR30IGX
JBZFL30IGX
29-3/4"
(75.6 cm)
36"
JBRFR36IGX
JBRFL36IGX
35-3/4"
(90.8 cm)
Width varies
(See table)
83 1/2"
23-7/8"
8 INTRODUCTION
DIMENSIONS
ACCESSORIES
CUSTOM TOEKICK
Height 3-9/16" (9.1 cm)
Thickness 3/16"-3/4" (.47 cm-1.9 cm)
STAINLESS STEEL PANEL
Height 80" (203.2 cm)
Thickness 13/16" (2.1 cm)
CUSTOM PANEL
Thickness 3/4" (1.9 cm) max.
Weight 60 lbs. (27.2 kg) max.
Typical Height 80" (203.2 cm)
MODEL FLUSH WIDTH
18" 17-3/4" (45.1 cm)
24" 23-3/4" (60.3 cm)
30" 29-3/4" (75.6 cm)
36" 35-3/4" (90.8 cm)
MODEL OVERLAY WIDTH
18" 19" (48.3 cm)
24" 25" (63.5 cm)
30" 31" (78.7 cm)
36" 37" (94 cm)
1/8"
Furniture
Panel
Furniture
Panel
INTRODUCTION 9
DOOR STYLE
CUSTOM PANEL WIDTH
1/8"
DIMENSIONS
OPENING
OPENING WIDTH
Model Width (A)
18"
JBZFR18IGX
JBZFL18IGX
18"
(45.7 cm)
24"
JBRFR24IGX
JBRFL24IGX
JBZFR24IGX
JBZFL24IGX
24"
(61 cm)
30"
JBRFR30IGX
JBRFL30IGX
JBZFR30IGX
JBZFL30IGX
30"
(76.2 cm)
36"
JBRFR36IGX
JBRFL36IGX
36"
(91.4 cm)
8"
84"
25"
**
*Soffit not required for
a single column install
**24" with 24" trim kit
Width (A)
10 INTRODUCTION
Furniture
return
Soffit
*
B
C
D
A
DIMENSIONS
OPENING
DOOR SWING REQUIREMENTS
Model 115º Door Swing "A" 90º Door Swing "B" Wall Gap "C" Door Open Depth "D"
18" 10-1/2" (26.7 cm) 5" (12.7 cm) 2-1/2" (6.4 cm) 44-1/2" (113 cm)
24" 13" (33 cm) 5" (12.7 cm) 2-1/2" (6.4 cm) 50-1/2" (128.3 cm)
30" 15-1/2" (39.4 cm) 5" (12.7 cm) 2-1/2" (6.4 cm) 56-3/8" (143 cm)
36" 18" (45.7 cm) 5" (12.7 cm) 2-1/2" (6.4 cm) 62-7/16" (158.6 cm)
Dimensions give 2-1/2" spacing between stainless steel handle accessory and wall to avoid pinching.
For a custom wood panel, consider handle depth to maintain 2-1/2" spacing.
INTRODUCTION 11
SITE PREP
1. CHECK THE FURNITURE
Measure to make sure all opening dimensions
are correct. (See previous page.)
Side panel construction: 3/4" (1.9 cm)
thick plywood
IMPORTANT: Cannot be constructed of pressed
fiber material such as MDF.
Soffit height (if present): 84" (213.4 cm)
2. CHECK THE INSTALLATION SITE
Away from ovens, radiators or other heat sources.
Temperature will not fall below 55° F (13° C).
Floor supports more than 600 lbs. (272 kg)
plus door panel and contents weight.
Floor level with the room.
Furniture face plumb.
Furniture
Return
Side
Panel
12 INTRODUCTION
Soffit
84"
Furniture
Return
Side
Panel
1/8" max
SITE PREP
3. CHECK THE WATER SUPPLY
Water supply meets local plumbing codes.
Water shutoff in base cabinet, as shown,
or accessible area.
Access hole through the cabinet is within 1/2"
(1.3 cm) of the rear wall.
Install any additional tubing only where
temperatures remain above freezing.
Check for leaks.
Not using a piercing-type or 3/16" (4.76 mm)
saddle valve. See refrigerator dealer for
saddle-type valve kit that complies with
local plumbing codes.
If water pressure to reverse osmosis system
is less than 40 to 60 psi (276 to 414 kPa):
Check sediment filter to see if it is blocked.
Replace filter if necessary.
Allow the storage tank to refill after
heavy usage.
Remove the water filter cartridge.
No filter bypass is necessary.
WATER SUPPLY REQUIREMENTS
Water Pressure 30 – 120 psi (207 – 827 kPa)
Water Pressure to
Reverse Osmosis
System
Minimum 40 – 60 psi
(276 – 414 kPa)
Excess Water Line
for Connection
30" (76.2 cm)
Supply 1/4" OD copper, braided
stainless steel or PEX tubing
IF YOU HAVE QUESTIONS ABOUT YOUR WATER SUPPLY,
CALL A LICENSED, QUALIFIED PLUMBER
Water shutoff
Access hole
(within 1/2" of rear wall)
?
INTRODUCTION 13
SITE PREP
4. CHECK THE ELECTRICAL
Column on a separate circuit. Outlet cannot
be turned off by a switch.
Not using an extension cord.
Not using a GFCI protected outlet.
Electrical installed in the zones highlighted.
(See graphic to the right.)
ELECTRICAL REQUIREMENTS
Product Width/
Alternate Electrical
Zone Width "A"
Electrical Zone Width "B"
18" (45.7 cm) 14-1/2" (36.8 cm)
24" (61 cm) 20-1/2" (52 cm)
30" (76.2 cm) 26-1/2" (67.3 cm)
36" (91.4 cm) 32-1/2" (82.6 cm)
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result
in death, fire, or electrical shock.
Electrical zone
Alt electrical zone
(inside cabinet
above column)
"A" width x 12" height
"A" width x 3-1/2" height
"B" width x
6-1/2" height
Alt electrical zone
4-1/2"
1-3/4"
IF YOU HAVE QUESTIONS ABOUT YOUR ELECTRICAL SUPPLY,
CALL A LICENSED, QUALIFIED ELECTRICIAN
?
14 INTRODUCTION
SITE PREP
INTRODUCTION 15
5. PREINSTALLATION CHECK
Verify customer’s selected door style.
Remove all installation materials from
the deli drawer.
Mark selected door style on templates and
door depth gauges with a permanent marker.
Verify that the diagonal measurements
of opening match.
Check design considerations document to
verify panel and toe-kick dimensions, as well
as gaps and overlays.
16
1

PREPARATION
17
1.1
UNCRATE COLUMN, DISCARD CARTON.
COLUMN
PREPARATION
1
REMOVE INSTALLATION KIT FROM DELI DRAWER WHILE ON SKIDS
BEFORE MOVING COLUMNS, REVIEW ALL WARNINGS.
WARNING
Tip Over Hazard
Refrigerator is top heavy and tips easily when not
completely installed.
Keep doors taped closed until refrigerator is
completely installed.
Use two or more people to move and install
refrigerator.
Failure to do so can result in death or serious injury.
When Moving Your Refrigerator:
Your refrigerator is heavy. When moving the refrigerator for
cleaning or service, be sure to cover the floor with
cardboard or hardboard to avoid floor damage. Always pull
the refrigerator straight out when moving it. Do not wiggle or
“walk” the refrigerator when trying to move it, as floor
damage could occur.
18
1.3
REMOVE BOTH WATER FILTER SCREWS.
COLUMN
PREPARATION
1
5mm driver bit
1.2
MOVE COLUMN IN FRONT OF OPENING.
USE TWO PEOPLE. DO NOT OPEN DOOR UNTIL COLUMN IS SECURED
19
1.4
2
1
PULLING LEFT, REMOVE FACEPLATE.
1.5
PULL HOUSING FORCEFULLY RIGHT, REMOVE.
COLUMN
PREPARATION
1
1
20
1.7
REMOVE BASE AIR GRILLE.
COLUMN
PREPARATION
1
2
1
2
1.6
REMOVE FOUR AIR GRILLE SCREWS.
5mm driver bit
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154

Jenn-Air JBRFL24IGX Guide d'installation

Taper
Guide d'installation
Ce manuel convient également à

dans d''autres langues