Silvercrest SFM 4 A1 Le manuel du propriétaire

WIRELESS OPTICAL MOUSE SFM 4 A1

OPTISCHE FUNKMAUS

Bedienungsanleitung

IAN 101410

SOURIS OPTIQUE SANS FIL

Mode d'emploi

OPTISCHE DRAADLOZE

MUIS

Gebruiksaanwijzing

OPTISK RADIOMUS

Bruksanvisning

WIRELESS OPTICAL MOUSE

Operating instructions

GB / IE Operating instructions Page 1

SE Bruksanvisning Sidan 23

FR / BE Mode d’emploi Page 47

NL / BE Gebruiksaanwijzing Pagina 71

DE / AT / CH Bedienungsanleitung Seite 95

Before reading, unfold the page containing the illustrations and

familiarise yourself with all functions of the device.

Vik ut bildsidan och ha den till hands när du läser igenom

anvisningarna och gör dig bekant med apparatens / maskinens

funktioner.

Avant de lire le mode d'emploi, ouvrez la page contenant les

illustrations et familiarisez-vous ensuite avec toutes les fonctions

de l'appareil.

Vouw vóór het lezen de pagina met de afbeeldingen open en

maak u vertrouwd met alle functies van het apparaat.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus

und machen Sie sich anschließend mit allen Funktionen des

Gerätes vertraut.

SFM 4 A1 – Software CD

SOURIS OPTIQUE SANS FIL SFM 4 A1

OPTISCHE FUNKMAUS

Bedienungsanleitung

IAN 101410

SOURIS OPTIQUE SANS FIL

Mode d'emploi

WIRELESS OPTICAL MOUSE

Operating instructions

1

SFM 4 A1

GB

IE

Contents

Introduction . . . . . . . .2

Copyright . . . . . . . . . . . . .2

Limitation on liability . . . . .2

Intended use . . . . . . . . . . .3

Warnings used . . . . . . . . .4

Notes on trademarks . . . .5

Safety . . . . . . . . . . . . .5

Basic safety guidelines . . .5

Controls and

package contents . . .8

Initial operation . . . . .9

Check package contents

(see fold-out page) . . . . . .9

Disposal of packaging

materials . . . . . . . . . . . . .10

Inserting/replacing the

batteries . . . . . . . . . . . . .10

Connecting the

nano-USB receiver. . . . . .11

Power-saving mode . . . . .11

Changing operating

modes . . . . . . . . . . . . . . .12

Installing the software . . .12

Conﬁ guration of the

mouse buttons . . . . . . . . .14

Troubleshooting . . 16

Cleaning . . . . . . . . . 17

Storage . . . . . . . . . 17

Disposal . . . . . . . . . 18

Disposal of the device . . .18

Disposal of batteries . . . .18

Appendix . . . . . . . . 19

Technical data . . . . . . . . .19

Warranty . . . . . . . . . . . . .20

Service . . . . . . . . . . . . . .21

Importer . . . . . . . . . . . . .21

Declaration of conformity 22

IB_101410_SFM4A1_IE_SE_BE.indb 1 14.07.14 15:36

GB

IE

2

SFM 4 A1

Introduction

Congratulations on the purchase of your new device.

You have selected a high-quality product. The operating

instructions are part of this product. They contain impor-

tant information on safety, usage and disposal. Before

using the product, familiarise yourself with all handling

and safety guidelines. Use the product only as described

and for the range of applications speciﬁ ed. Keep these

operating instructions in a safe place. Please also pass

these operating instructions on to any future owner(s).

Copyright

This documentation is subject to copyright protection.

Any reproduction, or any reprint even in the form of

excerpts, as well as the rendition of ﬁ gures even in modi-

ﬁ ed form, is only permitted with the manufacturer's written

consent.

Limitation on liability

All the technical information, data and instructions regard-

ing installation, connection and operation contained in

these operating instructions corresponds to the latest infor-

mation available to us at the time of printing and takes

our previous experience and know-how into account.

IB_101410_SFM4A1_IE_SE_BE.indb 2 14.07.14 15:36

3

SFM 4 A1

GB

IE

No claims may be derived from the speciﬁ cations, ﬁ gures

and descriptions in these oper

ating instructions. The manu-

facturer assumes no responsibility for damage caused

by failure to observe these instructions, improper use,

incompetent repairs, making unauthorised modiﬁ cations

or for using unapproved replacement parts.

Intended use

This wireless mouse is an information technology device

designed as an input device for a computer. The device

must not be used outside of closed rooms. This device

is not intended for use in companies or for other com-

mercial uses (e.g. oﬃ ce productivity applications). Use

the device only in the home for private purposes. It is

not intended for any other use. Claims of any kind for

damage arising as a result of incorrect use will not be

accepted. The risk shall be borne solely by the user.

IB_101410_SFM4A1_IE_SE_BE.indb 3 14.07.14 15:36

GB

IE

4

SFM 4 A1

Warnings used

The following warnings are used in these operating

instructions:

DANGER

A warning at this hazard level indicates

an imminentl

y hazardous situation.

If the hazardous situation is not avoided, it could

result in death or serious physical injury.

► Follow the instructions in this warning to prevent

a fatality or serious personal injury.

CAUTION

A warning at this hazard level indicates

pot

ential material damage.

Failure to avoid this situation could result in material

damage.

► Follow the instructions in this warning to prevent

material damage.

NOTE

► A note indicates additional information that eases

de

vice handling.

IB_101410_SFM4A1_IE_SE_BE.indb 4 14.07.14 15:36

5

SFM 4 A1

GB

IE

Notes on trademarks

- USB

®

is a registered trademark of USB Implementers

Forum, Inc.

- Microsoft

®

, Windows

®

and other Microsoft product

names are registered trademarks of the Microsoft

Corporation.

- Intel

®

and Pentium

®

are registered trademarks of the

Intel Corporation.

- AMD

®

and AMD

®

Athlon™ are registered trademarks

of Advanced Micro Devices, Inc.

All other names and products may be trademarks or

registered trademarks of their respective owners.

Safety

In this section, you will receive important safety advice

relating to device handling. Improper use may result in

personal injury and material damage.

Basic safety guidelines

To ensure safe handling of the device, follow the safety

guidelines set out below

Ŷ WARNING! LED radiation! LED risk class 1.

A

void damage to eyes. Do not stare into the LED

beam. Do not look directly at the LED beam using

optical instruments.

IB_101410_SFM4A1_IE_SE_BE.indb 5 14.07.14 15:36

GB

IE

6

SFM 4 A1

Ŷ Prior to use, check the device for visible external

damage. Do not operate a device that has been

damaged or dropped.

Ŷ Always place the device on a stable and level surface.

It can be damaged if dr

opped.

Ŷ Do not expose the device to direct sunlight or high

temper

atures. Otherwise it may overheat and be

irreparably damaged.

Ŷ Do not place the product near heat sources such

as r

adiators or other heat-generating devices.

Ŷ Never attempt to open the device.

Ŷ Do not make any unauthorised modiﬁ cations or

alter

ations to the device.

Ŷ Do not expose the device to spray or dripping water

and do not place liquid-ﬁ

lled objects, such as vases

or open drink containers, on or near the device.

Ŷ Packaging materials such as plastic ﬁ lm or poly-

st

yrene must not be used as playthings.

Risk of suﬀ ocation!

IB_101410_SFM4A1_IE_SE_BE.indb 6 14.07.14 15:36

7

SFM 4 A1

GB

IE

DANGER

Mishandling the batteries can cause ﬁ r

es,

explosions, leakages or other hazards!

► Do not throw the batteries into a ﬁ re and do not

subject them to high temperatures.

► Do not open, deform or short-circuit batteries,

since this can lead to chemical leak

age.

► Do not attempt to recharge batteries. Do not

charge batteries unless they are explicitly labelled

as "rechargeable". There is a risk of explosion!

► Check the condition of the batteries at regular

inter

vals. Leaking chemicals can cause permanent

damage to the device. Take particular care when

handling damaged or leaking batteries. Risk of

chemical burns! Wear protective gloves.

► Chemicals which leak from a battery can cause

skin ir

ritation. In event of contact with the skin, rinse

with copious amounts of water. If the chemicals come

into contact with your eyes, rinse thoroughly with

water, do not rub and consult a doctor immediately.

► Keep batteries out of the reach of children.

Children can put batteries into their mouth and

swallow them. If a battery has been swallowed,

seek medical assistance IMMEDIATELY.

► Do not mix diﬀ erent types of batteries.

IB_101410_SFM4A1_IE_SE_BE.indb 7 14.07.14 15:36

GB

IE

8

SFM 4 A1

DANGER

► Always insert the batteries the right way round

(observe correct polarity) otherwise there is a

danger that they could explode.

► If you do not intend to use the device for a long

time, remove the batteries.

Controls and package contents

1 Left mouse button

2 Right mouse button

3 Scroll wheel

4 DPI button

5 Back button

6 Forward button

7 Optical sensor

8 Battery compartment

9 Storage compartment for the nano-USB receiver

0 Nano-USB receiver

q Software CD

w 2 x 1.5 V batteries

e Operating instructions

IB_101410_SFM4A1_IE_SE_BE.indb 8 14.07.14 15:36

9

SFM 4 A1

GB

IE

Initial operation

Check package contents

(see fold-out page)

The following components are included in delivery:

● Wireless mouse SFM 4 A1

● Nano-USB receiver 0

● Software CD q

● 2 x 1.5 V batteries w

● These operating instructions e

NOTE

► Check the consignment for completeness and for

signs of visible damage.

► If the consignment is incomplete or damaged due

to defectiv

e packaging or carriage, contact the

Service hotline (see the chapter Service).

Remove all parts of the device from the packaging and

remove all packaging materials.

IB_101410_SFM4A1_IE_SE_BE.indb 9 14.07.14 15:36

GB

IE

10

SFM 4 A1

Disposal of packaging materials

The packaging protects the device from damage during

shipment. The packaging materials have been selected

for their environmental friendliness and ease of disposal

and are therefore recyclable.

Returning the packaging to the materials

cycle conserves raw materials and reduces

the amount of waste that is generated.

Dispose of packaging materials which are no longer

needed in accordance with applicable local regulations.

Inserting/replacing the batteries

♦ Open the battery compartment 8 on the underside

of the wireless mouse.

♦ Insert 2 x 1.5 V AA batteries into the battery com-

par

tment 8 (observe correct polarity). First place

one battery in the lower compartment and then the

second battery in the higher compartment. Ensure

that the paper strip is positioned under the batteries,

this will make future battery exchanges easier.

♦ Close the battery compartment 8.

CAUTION

► Always use batteries from the same manufacturer

and of the same t

ype. Always replace both batteries

at the same time.

IB_101410_SFM4A1_IE_SE_BE.indb 10 14.07.14 15:36

11

SFM 4 A1

GB

IE

Connecting the nano-USB receiver

♦ Remove any other mouse that is connected to your

computer and then restart the computer.

♦ Remove the nano-USB receiver 0 fr

om the storage

compartment 9 on the bottom of the wireless

mouse.

♦ Connect the nano-USB receiver 0 to a fr

ee USB-port

on your computer while it is running.

The operating system recognises the new hardware

and automatically installs the necessary drivers. After

the installation of the driver, the wireless mouse is ready

for operation and can be used.

Power-saving mode

The wireless mouse is equipped with a power-saving mode.

Ŷ If you switch the computer oﬀ , the wireless mouse

automatically switches oﬀ

after around 8 minutes

in order to save power.

Ŷ If you disconnect the nano-USB receiver 0 fr

om the

computer, the wireless mouse automatically switches

oﬀ after around 8 minutes in order to save power.

Ŷ If you do not click, scroll or move the wireless mouse,

it turns oﬀ

after about 8 minutes. As soon as you

press any button on the wireless mouse or use the

scroll wheel, the wireless mouse switches back on.

IB_101410_SFM4A1_IE_SE_BE.indb 11 14.07.14 15:36

GB

IE

12

SFM 4 A1

Changing operating modes

You can use the DPI button 4 to switch the optical sam-

pling between the resolutions 1000 dpi, 1500 dpi and

2000 dpi. The higher the resolution, the more accurate

the wireless mouse's sampling.

Installing the software

To be able to use the full functionality of the mouse, you

must install the supplied software.

NOTE

► The following illustrations and descriptions relate

to the oper

ating system Microsoft

®

Windows

®

7.

The screen display may diﬀ er for other operating

systems.

♦ Insert the supplied software CD q in the CD-R

OM

drive of your computer.

The installation process should start automatically.

♦ If this is not the case, start the "setup.exe" ﬁ le on the

CD-R

OM manually by double-clicking it.

The installation starts and the installation wizard is

displayed.

IB_101410_SFM4A1_IE_SE_BE.indb 12 14.07.14 15:36

13

SFM 4 A1

GB

IE

The start window of the installation wizard will be displayed.

♦ Click on the "Next >" button.

♦ In the next step, you can choose the destination

folder for the installation b

y using the "Browse"

button or selecting the suggested destination.

♦ Move on to the next step by clicking on the

"Next >" button.

IB_101410_SFM4A1_IE_SE_BE.indb 13 14.07.14 15:36

GB

IE

14

SFM 4 A1

♦ To ﬁ nish the installation, click the "Finish" button.

The computer will be restarted.

Conﬁ guration of the mouse buttons

You can use the software to customise the mouse

functions according to your personal preferences.

♦ Double-click on this icon

in the system tray

(bottom left of your screen, next to the clock) or click

on the icon with the right mouse button and select

"Mouse properties" from the context menu.

IB_101410_SFM4A1_IE_SE_BE.indb 14 14.07.14 15:36

15

SFM 4 A1

GB

IE

The conﬁ guration menu for the mouse appears.

♦ Select the tab "Conﬁ guration of mouse button".

Here you can set a function for each of the ﬁ ve

mouse buttons.

♦ Click on the drop-down menu for the corresponding

mouse button and select a function fr

om the menu.

♦ To apply the changes, click on the "Apply" button

(the windo

w remains open) or on "OK" (the window

closes).

IB_101410_SFM4A1_IE_SE_BE.indb 15 14.07.14 15:36

GB

IE

16

SFM 4 A1

♦ Select "Restore to default" to return the buttons to

their original functions.

The other tabs in this conﬁ guration menu contain settings

for the respective operating system.

Troubleshooting

If the wireless mouse is not recognised after installation

or does not respond to input, check the following:

♦ Check to ensure that the batteries have been inserted

the right w

ay round.

♦ Check that the nano-USB receiver 0 is pr

operly

connected to the computer.

♦ Try using a diﬀ erent USB port on your computer.

♦ Check the capacity of the batteries and if necessary

r

eplace them.

♦ Note: you should use a mouse pad or similar if you

ar

e using the wireless mouse on a glass surface or

any other reﬂ ective surface.

IB_101410_SFM4A1_IE_SE_BE.indb 16 14.07.14 15:36

17

SFM 4 A1

GB

IE

NOTE

► If the above-mentioned solutions do not resolve

the pr

oblem, please contact Customer Service

(see chapter Service).

Cleaning

CAUTION

► Moisture penetrating the device can cause a short-

cir

cuit and damage the equipment. To avoid irrepar-

able damage, ensure that no moisture penetrates

the device during cleaning.

■ Clean the housing only with a soft damp cloth and

a mild deter

gent.

Storage

If you are not going to the use the device for a long pe-

riod of time, remove the nano-USB receiver 0 from your

computer and store it in the storage compartment9 on

the underside of the wireless mouse.

Remove the batteries from the device and store it in

a clean, dry location away from direct sunlight.

IB_101410_SFM4A1_IE_SE_BE.indb 17 14.07.14 15:36

La page charge ...

Silvercrest SFM 4 A1 Le manuel du propriétaire

Ce manuel convient également à

Silvercrest SFM 4 A1 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents