Samsung HT-F6530 Manuel utilisateur

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

5.1CH Blu-ray™

Home Entertainment System

user manual

HT-F6530

|

2 English

Safety Information

WARNING

• To reduce the risk of fire or electric shock, do not

expose this appliance to rain or moisture.

Note to CATV system installer

This reminder is provided to call the CATV system

installer’s attention to Section 820~40 of the NEC which

provides guidelines for proper grounding and, in particular,

specifies that the cable ground shall be connected to the

grounding system of the building, as close to the point of

cable entry as practical.

CLASS 1 LASER product

This product is classified as a CLASS 1 LASER product.

Use of controls, adjustments or performance of

procedures other than those specified herein may result

in hazardous radiation exposure.

Warning

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lighting flash and

arrowhead within the triangle

are warning signs alerting you

to dangerous voltage inside

the product.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE THE COVER (OR

BACK). NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The exclamation point within

the triangle is a warning sign

alerting you to important

instructions accompanying the

product.

DANGER :

• VISIBLE AND INVISIBLE LASER RADIATION WHEN

OPEN. AVOID DIRECT EXPOSURE TO BEAM. (FDA

21 CFR)

CAUTION :

• CLASS 3B VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN. AVOID EXPOSURE TO THE

BEAM (IEC 60825-1)

• THIS PRODUCT UTILIZES A LASER. USE OF

CONTROLS OR ADJUSTMENTS OR PERFORMANCE

OF PROCEDURES OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE. DO NOT OPEN COVER AND DO

NOT REPAIR YOURSELF. REFER SERVICING TO

QUALIFIED PERSONNEL.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

PRODUCTO LÁSER CLASE 1



Figures and illustrations in this User Manual are provided for reference only and may differ from actual

product appearance.



An administration fee may be charged if either

a. an engineer is called out at your request and there is no defect in the product (i.e. where you have

failed to read this user manual)

b. you bring the unit to a repair center and there is no defect in the product (i.e. where you have failed to

read this user manual).



The amount of such administration charge will be advised to you before any work or home visit is carried

out.

English 3

|

01

Safety Information

Precautions

Important Safety Instructions

Read these operating instructions carefully before using

the unit. Follow all the safety instructions listed below.

Keep these operating instructions handy for future

reference.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including AV receivers) that produce heat.

9. Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where it exits the

apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand,

tripod, bracket, or table

specified by the manufacturer,

or sold with the apparatus.

When a cart is used, use

caution when moving the cart/

apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or

when unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as when the power-

supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

Disc Storage & Management

• Holding Discs

- Fingerprints or scratches on

a disc may reduce sound and picture

quality or cause skipping.

- Avoid touching the surface of a disc where data has

been recorded.

- Hold the disc by the edges so that fingerprints will

not get on the surface.

- Do not stick paper or tape on the disc.

• Cleaning Discs

- If you get fingerprints or dirt on a disc,

clean it with a mild detergent diluted in

water and wipe with a soft cloth.

- When cleaning, wipe gently from the

inside to the outside of the disc.

- Disc Storage



Do not keep in direct sunlight.



Keep in a cool ventilated area.



Keep in a clean protection jacket and store

vertically.

Handling Cautions

• Do not expose this apparatus to dripping or splashing.

Do not put objects filled with liquids, such as vases, on

the apparatus.

• To turn this apparatus off completely, you must pull the

power plug out of the wall socket. Consequently, the

power plug must be easily and readily accessible at all

times.

• Do not touch the power plug with a wet hand.

It can cause an electric shock.

• Do not plug multiple electric devices into the same wall

socket. Overloading a socket can cause it to overheat,

resulting in a fire.

• Before connecting other components to this product,

be sure to turn them off.

• If you move your product suddenly from a cold place

to a warm place, condensation may occur on the

operating parts and lens and cause abnormal disc

playback. If this occurs, unplug the product, wait for

two hours, and then connect the plug to the power

outlet. Then, insert the disc, and try to play back again.

|

4 English

Safety Information

• If the product makes an abnormal noise or produces

a burning smell or smoke, turn off the power switch

immediately and disconnect the power plug from

the wall outlet. Then, contact the nearest customer

service center for technical assistance. Do not use the

product. Using the product as it is may cause a fire or

an electric shock.

License

Manufactured under license

from Dolby Laboratories.

Dolby, Pro Logic, and

the double-D symbol are

trademarks of Dolby Laboratories.

Manufactured under a license from U.S. Patent

No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535,

6,226,616, 7,212,872, 7,003,467, 7,272,567,

7,668,723, 7,392,195, 7,930,184, 7,333,929 and

7,548,853. DTS, DTS-HD, the Symbol, and DTS

or DTS-HD and the Symbol together are registered

trademarks & DTS Neo:Fusion is a trademark of DTS,

The terms HDMI and HDMI

High-Definition Multimedia

Interface, and the HDMI

Logo are trademarks or registered trademarks of

HDMI Licensing LLC in the United States and other

countries.

Oracle and Java are registered trademarks

of Oracle and/or its affiliates. Other names

may be trademarks of their respective

owners.

This item incorporates copy protection technology

that is protected by U.S. patents and other intellectual

property rights of Rovi Corporation. Reverse engineering

and disassembly are prohibited.

Blu-ray Disc™, Blu-ray™, and the logos are trademarks

of Blu-ray Disc Association.

This product uses Cinavia technology to limit the

use of unauthorized copies of some commercially-

produced film and videos and their soundtracks. When

a prohibited use of an unauthorized copy is detected, a

message will be displayed and playback or copying will

be interrupted.

More information about Cinavia technology is provided

at the Cinavia Online Consumer Information Center

at http://www.cinavia.com. To request additional

information about Cinavia by mail, send a postcard with

your mailing address to: Cinavia Consumer Information

Center, P.O. Box 86851, San Diego, CA, 92138, USA.”

This product incorporates proprietary technology

under license from Verance Corporation and is

protected by U.S. Patent 7,369,677 and other U.S.

and worldwide patents issued and pending as well

as copyright and trade secret protection for certain

aspects of such technology. Cinavia is a trademark of

engineering or disassembly is prohibited.

- Open Source License Notice

In the case of using open source software, Open

Source Licenses are available on the product menu.

Using the 3D Function

IMPORTANT HEALTH AND SAFETY INFORMATION FOR

3D PICTURES.

Read and understand the following safety information

before using the 3D function.

• Some viewers may experience discomfort while viewing

3D TV such as dizziness, nausea, and headaches.

If you experience any such symptom, stop viewing 3D

TV, remove the 3D Active Glasses, and rest.

• Watching 3D images for an extended period of time

may cause eye strain. If you feel eye strain, stop

viewing 3D TV, remove your 3D Active Glasses, and

rest.

• A responsible adult should frequently check on children

who are using the 3D function.

If there are any reports of tired eyes, headaches,

dizziness, or nausea, have the child stop viewing 3D

TV and rest.

• Do not use the 3D Active Glasses for other purposes

(such as general eyeglasses, sunglasses, protective

goggles, etc.)

• Do not use the 3D function or 3D Active Glasses while

walking or moving around. Using the 3D function or 3D

Active Glasses while moving around may cause you to

bump into objects, trip, and/or fall, and cause serious

injury.

English 5

|

01

Safety Information

• If you want to enjoy 3D content, connect a 3D device

(3D compliant AV receiver or TV) to the product’s HDMI

OUT port using a high-speed HDMI cable. Put on 3D

glasses before playing the 3D content.

• The product outputs 3D signals only through HDMI

cable connected to the HDMI OUT port.

• As the video resolution in 3D play mode is fixed

according to the resolution of the original 3D video, you

can not change the resolution to your preference.

• Some functions such as BD Wise, screen size

adjustment, and resolution adjustment may not operate

properly in 3D play mode.

• You must use a high-speed HDMI cable for proper

output of the 3D signal.

• Stay at least three times the width of the screen from

the TV when watching 3D images. For example, if you

have a 46 inch screen, stay 138 inches (11.5 feet) from

the screen.

• Place the 3D video screen at eye level for the best 3D

picture.

• When the product is connected to some 3D devices,

the 3D effect may not function properly.

• This product does not convert 2D content into 3D.

• “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of

the Blu-ray Disc Association.

Copyright

may be reproduced or copied without the prior written

permission of Samsung Electronics Co.,Ltd.

Contents

SAFETY INFORMATION

2 Warning

3 Precautions

3 Disc Storage & Management

3 Handling Cautions

4 License

4 Using the 3D Function

5 Copyright

GETTING STARTED

6 Disk and Format Compatibility

7 Logos of Discs the Product can Play

10 Accessories

11 Front Panel

11 Rear Panel

12 Remote Control

CONNECTIONS

14 Connecting the Speakers

17 Connecting to TV/External Devices

18 Connecting to a Network Router

SETTINGS

19 The Initial Settings Procedure

19 The Home Screen

19 Accessing the Settings Screen

20 Settings Menu Functions

24 Networks and the Internet

27 Upgrading Software

MEDIA PLAY

29 The All Content Screen

29 Playing Commercial Discs

29 Playing Files on a USB Device

30 Playing a Disc with User Recorded Content

30 Using the AllShare Network Function

31 Controlling Video Playback

34 Controlling Music Playback

38 Playing Photo Contents

39 Listening to Radio

40 Using the Special Effects Remote Control Buttons

NETWORK SERVICES

42 Logging in to Your Samsung Account

42 Before Using Movies & TV Shows or Apps

43 Using Movies & TV Shows

43 Using Apps

47 Screen Mirroring

47 Using the Web Browser

50 Linking your Internet Service Accounts to the

Product

50 BD-LIVE™

APPENDIX

51 Additional Information

54 Troubleshooting

57 Specifications

|

6 English

Getting Started

Disk and Format Compatibility

Disc Types and content your Product can Play

Media Disc Type Details

VIDEO

Blu-ray Disc

3D Blu-ray Disc

BD-ROM or BD-RE/-R disc recorded in the BD-RE format.

DVD-VIDEO, DVD-RW,

DVD-R, DVD+RW,

DVD+R

DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R discs that have

been recorded and finalized, or a USB storage media containing MKV,

MP4 contents.

MUSIC

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB

storage media containing MP3 or WMA contents.

PHOTO

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB

storage media containing JPEG contents.

| NOTES |



The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.



If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.



Your product will not play content that has been recorded on a DVD-R at a bitrate that exceeds 10 Mbps.



Your product will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds 30

Mbps.



Playback may not work for some types of discs, or when you use specific operations, such as angle change

and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if

necessary.



When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.

Disc Types your Product cannot Play

• HD DVD

• DVD-ROM/PD/MV-Disc,

etc

• DVD-RAM

• Super Audio CD

(except CD layer)

• DVD-RW(VR mode)

• CVD/CD-ROM/CDV/

CD-G/CD-I/LD

(CD-Gs play audio only,

not graphics.)

• 3.9 GB DVD-R Disc for

Authoring.

| NOTES |



This product may not respond to all operating commands because some Blu-ray Disc, DVD, and CD discs allow

specific or limited operation and provide only certain features during playback.

Please note that this is not a defect in the product.



Samsung cannot guarantee that this product will play every disc bearing the Blu-ray Disc, DVD or CD logo because

disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software

and/or the manufacture of discs.



Please contact the SAMSUNG Customer Care Center at 1-800-726-7864 if you have questions or encounter

difficulty when playing Blu-ray Disc, DVD, or CD discs in this product. Also, refer to rest of this user manual for

additional information on playback restrictions.



Some commercial discs and DVD discs purchased outside your region may not play on this product.

English 7

|

02

Getting Started

Region Code

Both products and discs are coded by region. These

regional codes must match for a disc to play. If the codes

do not match, the disc will not play.

The Region Number for this product is displayed on the

rear panel of the product.

Disc Type

Region

Code

Area

Blu-ray Disc

A

North America, Central

America, South America,

Korea, Japan, Taiwan, Hong

Kong and South East Asia.

B

Europe, Greenland, French

territories, Middle East, Africa,

Australia and New Zealand.

C

India, China, Russia, Central

and South Asia.

DVD-VIDEO

1

The U.S., U.S. territories and

Canada

2

Europe, Japan, the Middle

East, Egypt, Africa, Greenland

3

Taiwan, Korea, the Philippines,

Indonesia, Hong Kong

4

Mexico, South America,

Central America, Australia,

New Zealand, Pacific Islands,

Caribbean

5

Russia, Eastern Europe, India,

North Korea, Mongolia

6

China

| NOTES |



If the Region number of a Blu-ray Disc/DVDs

does not correspond to the Region number of this

product, the product cannot play the disc.

Logos of Discs the Product can Play

Blu-ray Disc 3D Blu-ray Disc

BD-LIVE Dolby

DTS

Java

NTSC broadcast system

in U.S.A, Canada, Korea,

Japan

|

8 English

Getting Started

Supported Formats

Video File Support

File

Extension

Container Video Codec Resolution

Frame rate

(fps)

Bitrate

(Mbps)

Audio Codec

*.avi

*.mkv

*.asf

*.wmv

*.mp4

*.3gp

*.vro

*.mpg

*.mpeg

*.ts

*.tp

*.trp

*.mov

*.flv

*.vob

*.svi

*.m2ts

AVI

MKV

ASF

MP4

3GP

MOV

FLV

VRO

VOB

PS

TS

SVAF

MPEG4 SP/ASP

1920x1080

(WMV v7,v8,

MSMPEG4 v3 :

1280x720)

6~30

30

Dolby Digital

LPCM

ADPCM

(IMA, MS)

AAC

HE-AAC

WMA

Dolby Digital

Plus

MPEG(MP3)

DTS

H.264 BP/

MP/HP

Motion JPEG

Microsoft

MPEG-4 v3

Window Media

Video v7, v8, v9

MPEG2

MPEG1

VP6 640x480

4

MVC -

24/25/30 60

*.webm

WebM VP8 1920x1080

6~30 20 Vorbis



Limitations

- Even when a file is encoded by a supported codec

listed above, the file might not be played if its content

is defective or corrupted.

- Normal playback is not guaranteed if the file's container

information is wrong or the file itself is corrupted.

- Files having higher bit or frame rates than standard

may stutter when played back.

- The seek (skip) function is not available if the file's

index table is damaged.

- When you playback a file remotely through a network

connection, video playback may stutter depending on

the network speed.

- Some USB/Digital camera devices may not be

compatible with the product.



Video decoder

- Supports up to H.264 Level 4.1 (except for FMO/ASO/

RS)

- Does not support VC1 AP L4

- Except for WMV v7, v8, MSMPEG4 v3, MVC, VP6

Below 1280 X 720: 60 frame max

Above 1280 X 720: 30 frame max

- Does not support GMC 2 or higher

- Supports SVAF Top/Bottom, Side by Side Only

- Supports BD MVC Spec Only



Audio decoder

- Supports WMA 10 Pro (Up to 5.1)

- Does not support WMA lossless audio.

- Supported ADPCM IMA, MS.

- Does not support ADPCM (A-Law, μ-Low)

- Does not support QCELP, AMR NB/WB

- Supports vorbis (Up to 2ch),

- Supports Dolby Digital Plus (Up to 7.1ch)



Comments

- MPEG4 : Supports up to GMC 1-Warping Point.

- H.264 : Supports up to BP/MP/HP Level 4.1.

- WMV : Supports V9, VC1 SP/MP/AP L3.

- MPEG1 : Does not support D-picture.

- MPEG2 : Supports up to Hight Profile High Level.

| NOTES |



Some MKV and MP4 format discs may not play,

depending on their video resolution and frame rate.

English 9

|

02

Getting Started

Music File Support

File

Extension

Container

Audio

Codec

Support Range

*.mp3

MP3

MPEG1

Audio

Layer 3

-

*.m4a

*.mpa

*.aac

MPEG4

AAC -

*.flac

FLAC

Supports up to

2ch

*.ogg

OGG

Vorbis

Supports up to

2ch

*.wma

WMA

Supports WMA 10

Pro (Up to 5.1)

Does not support

WMA lossless

audio

Supports up to M2

profile

Does not

support LBR mode

*.wav

wav

wav -

*.mid

*.midi

midi

midi type 0 and type 1

*.ape

ape

Does not support

X13, NVT

Picture File Support

File Extension Type

Resolution

*.jpg

*.jpeg

JPEG

15360x8640

*.png

PNG

4096x4096

*.bmp

BMP

4096x4096

*.mpo

MPO

15360x8640

Notes on the USB connection

• Your product supports USB storage media, MP3

players, digital cameras, and USB card readers.

• The product does not support folder or file names

longer than 128 characters.

• Some USB/digital camera devices may not be

compatible with the product.

• Your product supports the FAT 16, FAT 32, and NTFS

file systems.

• Connect USB devices directly to the product’s USB

port. Connecting through a USB cable may cause

compatibility problems.

• Inserting more than one memory device into a

multi-card reader may cause the reader to operate

improperly.

• The product does not support the PTP protocol.

• Do not disconnect a USB device during a “loading”

process.

• The bigger the image resolution, the longer the image

takes to display.

• This product cannot play MP3 files with DRM (Digital

Rights Management) downloaded from commercial

sites.

• Your product only supports video that is under 30fps

(frame rate).

• Your product only supports USB Mass Storage Class

(MSC) devices such as thumb drives and USB HDD.

(HUB is not supported.)

• Certain USB HDD Devices, multi-card readers and

thumb drives may not be compatible with this product.

• If some USB devices require excessive power, they

may be limited by the circuit safety device.

• If playback from a USB HDD is unstable, provide

additional power by plugging the HDD into a wall

socket. If the problem continues, contact the USB

HDD manufacturer.

• SAMSUNG is not responsible for any data file damage

or data loss.

|

10 English

Getting Started

AVCHD

(Advanced Video Codec High Definition)

• This product can play back AVCHD format discs.

These discs are normally recorded and used in

camcorders.

• The AVCHD format is a high definition digital video

camera format.

• The MPEG-4 AVC/H.264 format compresses images

with greater efficiency than the conventional image

compressing format.

• Some AVCHD discs use the “x.v.Color” format. This

product can play back AVCHD discs that use the

“x.v.Color” format.

• “x.v.Color” is a trademark of Sony Corporation.

• “AVCHD” and the AVCHD logo are trademarks of

Matsushita Electronic Industrial Co., Ltd. and Sony

Corporation.

| NOTES |



Some AVCHD format discs may not play, depending

on the recording conditions.



AVCHD format discs need to be finalized.



“x.v.Color” offers a wider color range than normal DVD

camcorder discs.



Some MKV and MP4 format discs may not play,

depending on their video resolution and frame rate.

Accessories

Check for the supplied accessories below.

FUNCTION

DISC MENU TITLE MENU

MUTE

TV SOUND

FULL SCREEN REPEAT

TOOLS

RETURN

EXIT

INFO

MO/ST

3D SOUND

SOUND

S/W LEVEL

MANUAL

1

2

3

4

56

7

8

0

9

POPUP

RECEIVER

SLEEP

BD TV

TUNER

MEMORY

SUBTITLE

SMART SEARCH

HOME

ABCD

EFFECTPRESET

HUB

VOL

TUNING

/ CH

TV

SOURCE

AUDIO

FM Antenna

Power Cable

Remote Control/

Batteries (AAA size)

User Manual Soft Cloth

English 11

|

02

Getting Started

Front Panel

H

I

G

H

-

E

N

D

V

A

C

U

M

T

U

B

E

S

O

U

N

D

5V 0.5A

POWER USB

VOLUME CONTROL

VACUUM TUBE AMP

OPEN/CLOSE

STOP

PLAY/PAUSE

FUNCTION

DISPLAYDISC TRAY

REMOTE CONTROL SENSOR

| NOTES |



Cellular phones or mobile devices placed near the vacuum tube amp or electronic products placed on the top of the

product can cause audio noise or distortion.



When the product is on, do not let children touch the product's surface. It will be hot.



To upgrade the product's software through the USB jack, you must use a USB flash drive.



When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the

6

button on the

product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the

E

button.



If you use the Internet service or play the USB device contents on the TV, you cannot select the BD/DVD mode with

the FUNCTION button. Stop the playing contents on the TV first to select the BD/DVD mode.

Rear Panel

HDMI OUT

HDMI IN

1 2

LAN

POWER

AUX IN FM ANT

OPTICAL

DIGITAL

AUDIO IN

L

R

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT

L

SURROUND

L

FRONT

R

SURROUND

R

IMPEDANCE : 3

COOLING FAN

SPEAKER OUTPUT

CONNECTORS

HDMI IN AUX IN * FM ANTENNA

POWER CORD HDMI OUT LAN TERMINAL EXTERNAL DIGITAL

AUDIO IN (OPTICAL)

* Connecting the FM Antenna

1. Connect the FM antenna supplied to the FM ANT Jack.

2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or

other rigid surface.

|

NOTES

|



Maintain a minimum of 4 inches of clear space on all sides of the home theater to ensure adequate ventilation. Do

not obstruct the cooling fan or ventilation holes.



This product does not receive AM broadcasts.

|

12 English

Getting Started

FUNCTION

DISC MENU TITLE MENU

MUTE

TV SOUND

FULL SCREEN REPEAT

TOOLS

RETURN

EXIT

INFO

MO/ST

3D SOUND

SOUND

S/W LEVEL

MANUAL

1

2

3

4

56

7

8

0

9

POPUP

RECEIVER

SLEEP

BD TV

TUNER

MEMORY

SUBTITLE

SMART SEARCH

HOME

ABCD

EFFECTPRESET

HUB

VOL

TUNING

/ CH

TV

SOURCE

AUDIO

Remote Control

Tour of the Remote Control

Press to apply sound effects.

Turn the product on and off.

To change to Home Theater mode

and control the Home Theater,

press the BD button.

Press numeric buttons to operate

options.

Press to skip backwards or

forwards.

Adjust the volume.

Cut off the sound temporarily.

Press to see the full screen

on a TV.

Press to move to the Home screen.

Select on-screen menu items and

change menu values.

Return to the previous menu.

These buttons are used both for

menus on the product and also

several Blu-ray Disc functions.

Press to view the disc menu.

Press to use the Tools menu.

Press to use Smart Hub.

Selects the disc Audio language.

To change to Television mode

and control the TV, press the TV

button.

Press to stop/play a disc.

Press to search contents.

Press to select MANUAL/PRESET

in the Tuner function.

Set a Sleep time to shut off the

product.

Press to select the home theater's

mode (HDMI1, AUX, BD/DVD, etc.).

or

Press to select TV's video mode.

Select MONO or STEREO for radio

broadcasts.

Press to search backwards or

forwards.

Press to pause a disc.

Search for active FM stations and

to change channels.

Press to output the audio signal to

the home theater speakers or the TV

speaker. (See page 40)

Use to enter the Popup menu/Title

menu.

Press to exit the menu.

Use to display the playback

information when playing

a Blu-ray/DVD disc.

Use to set a preset radio frequency.

Allows you to repeat a title,

chapter, track or disc.

Use to adjust the level of the

subwoofer.

Selects the disc subtitle language.

Press to apply the 3D sound effect.

Press to open and close the

disc tray.

English 13

|

02

Getting Started

Installing Batteries in the Remote Control

Battery size: AAA

21

| NOTES |



Make sure to match the “+” and “–” ends of the

batteries with the diagram inside the compartment.



Assuming typical TV usage, the batteries last for about

one year.



The remote control can be used up to approximately

23 feet (7 meters) from the product in a straight line.

Setting up the Remote Control

You can control certain functions of your TV with this

remote control.

To operate a TV with the Remote Control

1. Press the TV button to set the remote control to TV

mode.

2. Turn on your TV.

3. While holding down the POWER button, enter the

code corresponding to your brand of TV.

• If there is more than one code listed for your TV in

the table, enter one at a time to determine which

code works.

• Example : For a Samsung TV

While holding down the POWER button, use

the number buttons to enter 00. If that does not

work, try 15, then 16, etc.

4. If the TV turns off, the setting is complete.

• You can use the TV POWER, VOLUME,

CHANNEL, and Numeric buttons (0~9).

| NOTES |



The remote may not be able to control some

functions, depending on your brand of TV. Also, the

remote control may not work on some brands of TVs.



The remote control will work with Samsung TVs by

default.



Do not dispose of batteries in a fire.



Do not short circuit, disassemble or overheat the

batteries.



Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

TV Control Codes

Brand Code

Admiral

(M.Wards)

56, 57, 58

A Mark 01, 15

Anam

01, 02, 03, 04, 05, 06, 07,

08, 09, 10, 11, 12, 13, 14

AOC 01, 18, 40, 48

Bell & Howell

(M.Wards)

57, 58, 81

Brocsonic 59, 60

Candle 18

Cetronic 03

Citizen 03, 18, 25

Cinema 97

Classic 03

Concerto 18

Contec 46

Coronado 15

Craig 03, 05, 61, 82, 83, 84

Croslex 62

Crown 03

Curtis Mates 59, 61, 63

CXC 03

Daewoo

02, 03, 04, 15, 16, 17, 18,

19, 20, 21, 22, 23, 24, 25,

26, 27, 28, 29, 30, 32, 34,

35, 36, 48, 59, 90

Daytron 40

Dynasty 03

Emerson

03, 15, 40, 46, 59, 61, 64,

82, 83, 84, 85

Fisher 19, 65

Funai 03

Futuretech 03

General Electric

(GE)

06, 40, 56, 59, 66, 67, 68

Hall Mark 40

Hitachi 15, 18, 50, 59, 69

Inkel 45

JC Penny 56, 59, 67, 86

JVC 70

KTV 59, 61, 87, 88

KEC 03, 15, 40

KMC 15

LG (Goldstar)

01, 15, 16, 17, 37, 38, 39,

40, 41, 42, 43, 44

Luxman 18

LXI (Sears)

19, 54, 56, 59, 60, 62, 63,

65, 71

Magnavox

15, 17, 18, 48, 54, 59, 60,

62, 72, 89

Marantz 40, 54

Matsui 54

MGA 18, 40

Brand Code

Mitsubishi/MGA 18, 40, 59, 60, 75

MTC 18

NEC 18, 19, 20, 40, 59, 60

Nikei 03

Onking 03

Onwa 03

Panasonic

06, 07, 08, 09, 54, 66,

67, 73, 74

Penney 18

Philco

03, 15, 17, 18, 48, 54,

59, 62, 69, 90

Philips

15, 17, 18, 40, 48, 54,

62, 72

Pioneer 63, 66, 80, 91

Portland 15, 18, 59

Proton 40

Quasar 06, 66, 67

Radio Shack 17, 48, 56, 60, 61, 75

RCA/Proscan

18, 59, 67, 76, 77, 78,

92, 93, 94

Realistic 03, 19

Sampo 40

Samsung

00, 15, 16, 17, 40, 43,

46, 47, 48, 49,

59, 60, 98

Sanyo 19, 61, 65

Scott 03, 40, 60, 61

Sears 15, 18, 19

Sharp 15, 57, 64

Signature 2000

(M.Wards)

57, 58

Sony 50, 51, 52, 53, 55

Soundesign 03, 40

Spectricon 01

SSS 18

Sylvania

18, 40, 48, 54, 59, 60,

62

Symphonic 61, 95, 96

Tatung 06

Techwood 18

Teknika 03, 15, 18, 25

TMK 18, 40

Toshiba 19, 57, 63, 71

Vidtech 18

Videch 59, 60, 69

Wards

15, 17, 18, 40, 48, 54,

60, 64

Yamaha 18

York 40

Yupiteru 03

Zenith 58, 79

Zonda 01

Dongyang 03, 54

HT-F6530_ZC_0923.indd 13HT-F6530_ZC_0923.indd 13 2013-09-23  4:20:542013-09-23  4:20:54

|

14 English

Connections

This section describes various methods of connecting the product to other external components.

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

Connecting the Speakers

Front (L)

Surround (L)

Surround (R)

Front (R)

Product

Center

Subwoofer

Position of the product

Place it on a stand or cabinet shelf, or

under the TV stand.

Selecting the Listening Position

The listening position should be located

about 2.5 to 3 times the TV's screen

size away from the TV. For example, if

you have a 46 inch screen, locate the

listening position 115 to 138 inches (9.6

to11.5 feet) from the screen.

Front Speakers

Place these speakers in front of your listening position, facing inwards (about 45°) toward you.

Place the front speakers so that their tweeters will be at the same height as your ear. Align the

front face of the front speakers with the front face of the center speaker or place them slightly

in front of the center speakers.

Center Speaker

It is best to install the Center Speaker at the same height as the front speakers. You can also

install it directly over or under the TV.

Surround

Speakers

Place these speakers to the side of your listening position. If there isn't enough room, place

these speakers so they face each other. Position them about 2 to 3 feet (60 to 90cm) above

your ear, facing slightly downward.

* Unlike the front and center speakers, the surround speakers are used mainly for sound

effects. Sound will not come from them all the time.

Subwoofer

The position of the subwoofer is not so critical. Place it anywhere you like.

Speaker Components

Surround x 2

Subwoofer

Speaker Cable x 5

Front x 2

Stand x 2

Stand Base x 2

Center

Screw (5x15) x 2

Screw (5x20) x 6

English 15

|

03

Connections

Installing the Speakers on the Tallboy Stand

1. Turn the Stand Base upside-down and connect it to

the Stand.

2. Use the driver to combine the screws (5x20) on the

3 marked holes.

3. Straighten a supplied speaker wire and put in the

hole on the center of Stand Base.

4. Connect the upper Speaker to the assembled

Stand.

5. Insert a screw (5x15) clockwise into the hole on the

rear of the speaker using a screwdriver.

And then connect a speaker cable.

6. This is the appearance after the speaker is installed.

Follow this steps to install other speaker.

Connecting The Speakers

1. Match each speaker cable bundle to the correct speaker by matching the color

coded plug on each bundle to the colored sticker on the bottom of each speaker.

2. To attach speaker wire to each speaker:

a. Press down the red tab on the back of the speaker, insert the red wire, and then

release the tab.

b. Press down the black tab on the back of the speaker, insert the black wire, and

then release the tab.

3. Connect the speaker wire plugs from each speaker to the back of the product by

matching the colors of the speaker plugs to the colors of the speaker jacks.

1

Stand Base

Stand

3

4

Speaker

Stand

2

5 6

Black

Red

|

16 English

Connections

HDMI OUT

HDMI IN

1 2

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT

L

SURROUND

L

FRONT

R

SURROUND

R

IMPEDANCE : 3

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT

L

SURROUND

L

FRONT

R

SURROUND

R

IMPEDANCE : 3

Front

Speaker (R)

Front

Speaker (L)

Subwoofer

Center Speaker

Surround Speaker (R) Surround Speaker (L)

| CAUTION |



If you want to install the speakers on the wall, fasten screws or nails (not provided) firmly to the wall wherever you

want to hang a speaker, and then, using the hole in the rear of each speaker, carefully hang each speaker on a screw

or nail.



Do not let children play with or near the speakers. They could get hurt if a speaker falls.



When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.



Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien

substances into the duct (hole) of the subwoofer speaker.



Do not hang the subwoofer on the wall using the duct (hole).

| NOTES |



If you place a speaker near your TV set, the screen color may be distorted because of the magnetic field.



If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment or any other device that uses

the 2.4/5.8GHz frequencies near the product, sound from the speakers may be disrupted because of interference.

English 17

|

03

Connections

Connecting to TV/External Devices

HDMI OUT

HDMI IN

1 2

LAN

POWER

AUX IN FM ANT

OPTICAL

DIGITAL

AUDIO IN

L

R

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT

L

SURROUND

L

FRONT

R

SURROUND

R

IMPEDANCE : 3

HDMI OUT

HDMI IN

1 2

LAN

AUX IN FM ANT

OPTICAL

DIGITAL

AUDIO IN

L

R

OPTICAL OUT

AUDIO OUT

HDMI OUTHDMI IN

Method 1 Method 2 Method 3

R

Red

W

White

External Devices

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your

TV. If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control

and select HDMI as the external source of the TV.

Connecting to External Devices

To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the

mode changes in this order : BD/DVD



D. IN



AUX



HDMI1



HDMI2



FM



BT

Method 1 HDMI IN : Connecting to an External Component with an HDMI cable

Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your

digital device.



Select the HDMI1 or HDMI2 mode.

Method 2 AUX IN : Connecting an External Analog Component

Using a RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the

external analog component.



Select the AUX mode.

• Be sure to match the colors on the cable plugs to the colors on the input and output jacks.

Method 3 OPTICAL : Connecting an External Digital Audio Component

Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers (Set-

Top-Boxes). Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the

Digital Optical Out jack of the external digital device.



Select the D. IN mode.

| NOTES |



To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.



This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.



This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported

|

18 English

Connections

Connecting to a Network Router

You can connect your product to your network router

using one of the methods illustrated below.

Wired Network

HDMI OUT

HDMI IN

1 2

LAN

POWER

AUX IN FM ANT

OPTICAL

DIGITAL

AUDIO IN

L

R

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT

L

SURROUND

L

FRONT

R

SURROUND

R

IMPEDANCE : 3

Broadband

service

Broadband

service

Broadband modem

(with integrated router)

Broadband

modem

Router

Or

| NOTES |



Your router or your Internet Service Provider's policies

may prevent the product from accessing Samsung's

software update server. If this occurs, contact your

Internet Service Provider (ISP) for more information.



DSL users, please use a router to make a network

connection.



To use the AllShare function, you must connect your

PC to your network as shown in the illustrations on the

above.

The connection can be wired or wireless.

Wireless Network

Broadband

service

Wireless IP sharer

| NOTES |



If your wireless IP router supports DHCP, this product

can use a DHCP or static IP address to connect to the

wireless network.



Set your wireless IP router to Infrastructure mode. Ad-

hoc mode is not supported.



The product supports only the following wireless

security key protocols:

- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),

WPA2-PSK (TKIP/AES)



Select a channel on the wireless IP router that is not

currently being used. If the channel set for the wireless

IP router is currently being used by another device

nearby, it will result in interference and communication

failure.



In compliance with the newest Wi-Fi certification

specifications, Samsung home theaters do not

support WEP, TKIP, or TKIP-AES (WPS2 Mixed)

security encryption in networks running in the 802.11n

mode.



Wireless LAN, by its nature, may cause interference,

depending on the operating conditions (AP

performance, distance, obstacles, interference by

other radio devices, etc).

English 19

|

04

Settings

The Initial Settings Procedure

• The Home menu will not appear if you do not

configure the initial settings.

• The OSD (On Screen Display) may change in this

product after you upgrade the software version.

• The access steps may differ depending on the

menu you selected.

The Initial Settings Procedure lets you set the OSD and

menu languages, configure the connection to your home

network, choose the aspect ratio output (screen size and

format) that is correct for your TV, and apply an upgrade

to your product's software, if one is available.

For complete Initial Settings instructions, follow the order

in the screen.

| NOTES |



If you want to display the Initial Settings screen again

and make changes, select Settings > System >

Setup in the Home screen or select the Reset option.

(See page 22)

The Home Screen

Movies & TV

Shows

Apps Photos,

Videos &

Music

1

2

4

3

6

5

Add App Add App Add App Web Browser Settings

7

a

Samsung Account

d

Screen Mirroring

1

Movies & TV Shows : Download movies and

TV Shows from the Internet.

| NOTES |



Depending on your country, this menu

function may not be supported.

2

Recommended Apps : A list of useful and

popular apps we recommend you download.

3

Web Browser : You can access the Internet

using the Web Browser application.

4

Apps : Download/Access various for pay or

free-of-charge applications.

5

Photos, Videos & Music : Play photos, videos

or music content from Disc, USB, PC or mobile

devices.

6

Settings : Set various functions to suit your

personal preferences.

7

RED (A) : Press the RED (A) button on your

remote to create and/or log in to your personal

Samsung account.

BLUE (D) : Set up the Screen Mirroring

function between the home theater and a smart

phone or tablet.



Selecting an Option on the Home Screen

1. To select an option on the Home screen, move the

cursor using the

▲▼◄►

buttons until it highlights

the option of your choice, and then press the

E

button.

| NOTES |



If you leave the product in the stop mode for more

than 5 minutes without using it, a screen saver will

appear on your TV. If the product is left in the screen

saver mode for more than 20 minutes, the power will

automatically turn off.

Accessing the Settings Screen

1. Select Settings on the Home screen, and then

press

E

. The Settings screen appears.

E

Display

3D Settings

TV Aspect Ratio

16:9 Original

BD Wise Off

Resolution Auto

Movie Frame (24Fs) Auto

DVD 24Fs Conversion Off

Smart Hub Screen Size Size 3

Display

Audio

Network

Smart Features

System

Support

Settings

2. To access the menus, sub-menus, and options

on the Settings screen, please refer to the remote

control illustration on the next page.

Settings

|

20 English

Settings

Buttons on the Remote Control Used

for the Settings Menu

FULL SCREEN REPEAT

TOOLS

RETURN

EXIT

INFO

MO/ST

TUNER

MEMORY

HOME

24

3

1

HOME Button : Press to move to the Home

screen.

2

RETURN Button : Return to the previous menu.

3

E

(Enter) / DIRECTION Button :

• Press

▲▼◄►

to move the cursor or select

an item.

• Press the

E

button to activate the currently

selected item or confirm a setting.

4

EXIT Button : Press to exit the current menu.

Detailed Function Information

Each Settings function, menu item, and individual option

is explained in detail on-screen. To view an explanation,

use the ▲▼◄►buttons to select the function, menu

item, or option. The explanation will usually appear on the

right of the screen.

A short description of each Settings function starts on

this page. Additional information on some of the functions

is also in the Appendix of this manual.

Settings Menu Functions

Display

3D Settings

Set up the 3D related functions.



3D Blu-ray Playback Mode:

Select whether to play a Blu-ray

Disc with 3D contents in 3D Mode.

If you move to the Home or Smart

Hub Home menu while in 3D

mode, the product will switch to 2D

automatically.



Screen Size: Enter the size of the

TV attached to the product. The

product will automatically adjust the

3D output to the screen size of the

TV.

TV Aspect

Ratio

Lets you adjust the output of the

product to the screen size of your

TV. See page 51.

BD Wise

BD Wise is Samsung’s latest inter-

connectivity feature.

When you connect a Samsung

product and a Samsung TV with BD

Wise to each other via HDMI, and

BD Wise is on in both the product

and TV, the product outputs video at

the video resolution and frame rate

of the Blu-ray/DVD Disc.

Resolution

Lets you set the output resolution of

the HDMI video signal to

BD Wise, Auto, 1080p, 1080i,

720p, 480p. The number indicates

the number of lines of video per

frame. The i and p indicate interlaced

and progressive scan, respectively.

The more lines, the higher quality.

Movie Frame

(24Fs)

Setting the Movie Frame (24Fs)

feature to Auto lets the product

adjust its HDMI output to 24 frames

per second automatically for

improved picture quality if attached

to a 24Fs compatible TV.

• You can enjoy the Movie Frame

(24Fs) feature only on a TV

supporting this frame rate.

• Movie Frame is only available

when the product is in the HDMI

1080p output resolution modes.

DVD 24Fs

Conversion

Converts DVD playback to 24

frames per second and outputs it via

HDMI. This option is only available

when Movie Frame (24Fs) is set to

on.

Smart Hub

Screen Size

Lets you select the optimal size for

the Smart Hub Screen.

HDMI Color

Format

Lets you set the color space format

for the HDMI output to match the

capabilities of the connected device

(TV, monitor, etc).

HDMI Deep

Color

Lets you set the product to output

video from the HDMI OUT jack with

Deep Color. Deep Color provides

more accurate color reproduction

with greater color depth.

La page charge ...

Samsung HT-F6530 Manuel utilisateur

Samsung HT-F6530 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents