HP PAVILION 500-168EF Le manuel du propriétaire

12” (30cm)

HDMI

DVI

VGA

DisplayPort

DVI/HDMI

DVI/VGA

http://www.hp.com/go/contactHP

http://welcome.hp.com/country/us/en/wwcontact_us.html

Copyright and License

Development Company, L.P.

The information contained herein is subject to

change without notice. The only warranties for

HP products and services are set forth in the

express warranty statements accompanying

such products and services. Nothing herein

should be construed as constituting an

additional warranty. HP shall not be liable for

technical or editorial errors or omissions

contained herein.

This product incorporates copyright protection

technology that is protected by U.S. patents and

other intellectual property rights. Use of this

copyright protection technology must be

authorized by Macrovision, and is intended for

home and other limited viewing uses only

unless otherwise authorized by Macrovision.

Reverse engineering or disassembly is

prohibited.

Microsoft and Windows are trademarks of

Microsoft Corporation in the U.S. and other

countries.

HP supports lawful use of technology and does

not endorse or encourage the use of our

products for purposes other than those

permitted by copyright law.

Product notice

This guide describes features that are common

to most models. Some features may not be

available on your computer.

The information in this document is subject to

change without notice.

Warranty Print on Demand Statement

You can find the expressly provided HP Limited

Warranty applicable to your product located with

the user guides on your computer and/or on the

CD/DVD provided in the box. In some countries/

regions, HP may provide a printed HP Limited

Warranty in the box. For some countries/regions

where the warranty is not provided in printed

format, you may request a printed copy from

hp.com/go/orderdocuments or write to:

North America: Hewlett-Packard, MS POD,

11311 Chinden Blvd., Boise, ID 83714, USA

Europe, Middle East, Africa: Hewlett-Packard,

POD, Via G. Di Vittorio, 9, 20063 Cernusco s/

Naviglio (MI), Italy

Asia Pacific: Hewlett-Packard, POD, P.O. Box

200, Alexandra Post Office, Singapore 911507

When you request a printed copy of your

warranty, please include your product number,

warranty period (found on your service label),

name, and postal address.

IMPORTANT! Do NOT return your HP product

to the addresses above. For U.S. products, go

to

http://www.hp.com/go/contactHP. For

worldwide support, go to

http://welcome.hp.com/country/us/en/

wwcontact_us.html.

1 Getting information

Type of information Where to find

● Set up your computer. Quick Setup (this Guide)

● Use the computer.

●

Connect to the Internet.

Quick Setup (this Guide)

●

Recover factory settings. Troubleshooting and Maintenance Guide on your computer. Select the HP

Support Assistant app on the Start screen, select My computer, and

then select User guides.

● See how-to videos about

using the features of your

computer.

Visit

http://www.hp.com/supportvideos (English only)

●

Learn how to use the

Microsoft Windows operating

system.

●

Find Windows password

information.

●

Find links to driver updates.

● Read frequently asked

questions.

Help and Support

From the Start screen, type h, and then select Help and Support. For

U.S. support, go to

http://www.hp.com/go/contactHP. For worldwide

support, go to

http://welcome.hp.com/country/us/en/wwcontact_us.html.

Windows troubleshooting tools

1. From the Start screen, type c, and then select Control Panel.

2. Select System and Security, and then under Action Center, select

Troubleshoot common computer problems.

●

Troubleshoot the most

common computer hardware

and software issues.

Troubleshooting and Maintenance Guide on your computer. Select the HP

Support Assistant app on the Start screen, select My computer, and

then select User guides.

● Find electronic user guides

and specifications for your

computer model.

● Order parts and find

additional troubleshooting

help.

HP Support website:

http://www.hp.com/go/contactHP

● Upgrade or replace

components of your

computer.

Upgrading and Servicing Guide

HP Support website:

http://www.hp.com/go/contactHP

1

Type of information Where to find

●

Find computer warranty

information.

HP Worldwide Limited Warranty and Technical Support included with your

computer.

Select the HP Support Assistant app on the Start screen, select My

computer, and then select User guides.

●

Get up-to-date information

and help from the Windows

community.

http://www.hp.com/support/consumer-forum

● Connect to a TV. Watching and Recording TV

Select the HP Support Assistant app on the Start screen, select My

computer, and then select User guides.

If the guide is not available there, visit

http://www.hp.com/go/contactHP.

● Maintain your computer. HP Support Assistant — Maintains your computer performance and

resolves problems faster by using automated updates, on-board

diagnostics, and guided assistance.

Select the HP Support Assistant app on the Start screen.

Troubleshooting and Maintenance Guide

Select the HP Support Assistant app on the Start screen, select My

computer, and then select User guides.

Maintaining Your Computer (this Guide)

●

Find safety and regulatory

notices.

Regulatory, Safety and Environmental Notices

Select the HP Support Assistant app on the Start screen, select My

computer, and then select User guides or visit

http://www.hp.com/go/

contactHP.

●

Find ergonomic information. Safety & Comfort Guide

Select the HP Support Assistant app on the Start screen, select My

computer, and then select User guides or visit

http://www.hp.com/ergo.

2 Chapter 1 Getting information

2 Setting up your computer

WARNING! To reduce the risk of electrical shock or damage to your

equipment:

• Place the computer in a location away from water, dust, moisture, and soot.

These can increase the inside temperature, or can cause fire or electrocution.

• Do not disable the power cord grounding plug. The grounding plug is an

important safety feature.

• Plug the power cord in a grounded (earthed) outlet that is easily accessible at

all times.

• Disconnect power from the equipment by unplugging the power cord from the

electrical outlet. To prevent direct exposure to laser beam, do not try to open the

enclosure of the CD or DVD drives.

• The power supply is preset for the country/region in which you purchased your

computer. If you move, check the voltage requirements for your new location

before plugging the computer into an AC power outlet.

The computer may be heavy; be sure to use ergonomically correct lifting

procedures when moving the computer.

To reduce the risk of serious injury read the Safety & Comfort Guide. The guide

is located on the web at

http://www.hp.com/ergo.

1. Place the computer so that all ventilation openings are unobstructed and

cabling is not in a walkway or where it can be stepped on or damaged by

placing furniture on it.

2. Connect all power cords from the monitor, computer, and accessories to a

power surge protection device that is specifically labeled as having surge

protection, an uninterruptible power supply (UPS), or a similar device. If the

computer has a television tuner, or a modem or telephone connection,

protect the computer by using surge protection with these signal inputs as

well. Connect the television cable or the telephone line cord to the surge

protection device, and then connect the device to the computer.

3. Download and install operating system updates.

a. Find out what operating system and version your computer is currently

running.

(From the Start screen, type c, select Control Panel, select System

and Security, and then select System. The operating system and

version are shown under Specifications.)

b. Open your internet browser and go to

http://www.hp.com/go/

contactHP.

3

c. Select your country and language, if necessary, and click Support &

Drivers.

d. Select Download drivers and software (and firmware), type your

computer model name and number in the product field, and press

Enter.

e. If necessary, select your computer model from Product search

results.

f. Select your computer operating system.

g. Click Download next to each update you wish to download.

h. Follow the on-screen instructions to install each downloaded update.

4. Look in the computer box for additional printed details or updates.

5. Read the Regulatory, Safety and Environmental Notices included with your

computer. Select the HP Support Assistant app on the Start screen, select

My computer, and then select User guides.

6. Read the Safety & Comfort Guide for proper workstation setup, posture,

health and work habits, and electrical and mechanical safety information.

Select the HP Support Assistant app on the Start screen, select My

computer, and then select User guides or visit

http://www.hp.com/ergo.

After you complete the initial computer setup, you might want to install additional

software programs or hardware devices. Check the operating system, memory,

and other requirements listed before purchasing new software or hardware for

your computer. Follow the software manufacturer's directions to install the new

software.

NOTE: Use only licensed original software. Installing copied software could

result in an unstable installation, infect the computer with a virus, or be illegal.

Security solutions can deter theft, mishandling, and software attacks, but cannot

prevent them.

Connecting to the Internet

Steps to connect to the Internet:

1. Connect the hardware as shown on the setup view.

2. Get Internet service.

Sign up with an Internet Service Provider (ISP). If you already have an

account with an ISP, skip this step and follow the instructions provided by

the ISP.

3. Using your Internet connection through your ISP, open a web browser and

browse the Internet.

NOTE: If you have issues connecting to the Internet, see Internet access

on page 15.

4 Chapter 2 Setting up your computer

3 Setting up additional features

Using Beats Audio™ (select models only)

Your HP TouchSmart PC features audio connectors (headphone and Audio Out)

that are optimized for Beats Audio™ headphones and external audio systems

(purchased separately). Select HP TouchSmart PC models also include four

Beats-optimized internal speakers and a Beats toggle button

on the keyboard.

Your computer comes ready for you to experience music with Beats enabled. To

disable Beats, press the Beats toggle button; the Beats off icon appears on the

screen. To turn Beats on, press the Beats toggle button again. If your keyboard

does not contain the Beats toggle button, press Fn+B to enable and disable

Beats. To view the Beats user interface, from the Start screen, type b, and then

select HP Beats Audio.

All you need to do is plug the Beats Audio headphones into the side headphone

connector to experience crisp and clear sound separation. To experience the full

capability of BEATS audio using the internal speakers, HP recommends

connecting a matching HP subwoofer to the Sub connector on the back panel. If

you are using an external audio system, plug it into the Audio Out connector on

the back panel.

Using an HDMI monitor

If your computer has a graphics card with an HDMI (High Definition Multimedia

Interface) connector, Hewlett-Packard recommends using a DVI or VGA

connector for a monitor, and using HDMI to connect a TV.

If you use HDMI to connect your monitor, you may need to adjust some settings

to hear sound (see the following steps). Because of this, HP recommends that

you connect analog speakers to the computer if you want to hear sound during

the initial setup of the computer.

For optimum viewing, you may need to adjust the resolution setting for the

monitor (see

Adjusting resolution on page 6).

Save this document for future use.

NOTE: If you ever need to recover the computer operating system by using the

Recovery Manager, you must repeat these procedures to activate sound and

adjust resolution for the HDMI connector.

IMPORTANT: Your HDMI monitor must be connected to the graphics card

before you activate sound and adjust resolution.

Activating sound

1. Press the Windows logo key on the keyboard to view the Desktop.

2. Right-click the Volume icon (white speaker) in the notification area, at the

far right of the task bar.

Using Beats Audio™ (select models only)

5

3. Select Playback devices. The Sound window opens.

4. On the Playback tab, look for the Default Device. It may display a green

circle with a checkmark in it.

If the Default Device is one of the following, then your HDMI monitor is

already activated:

●

NVIDIA High Definition Audio (select models only)

●

ATI High Definition Audio (select models only)

●

Realtek HDMI Output

Select the Cancel button to close the window, and then continue with the

next procedure, “Adjusting resolution,” if necessary.

If the Default Device is not one of these devices, continue with step 5.

5. If one of the following HDMI options is available on the Playback tab, select

it:

●

NVIDIA High Definition Audio (select models only)

● ATI High Definition Audio (select models only)

If neither of these is present, select Realtek HDMI Output.

6. Select Set Default.

7. Select OK to close the window. This completes the steps to activate HDMI

sound.

Adjusting resolution

To adjust resolution, follow the instructions for your type of graphics card. Press

the Windows logo key on the keyboard to view the Desktop. Right-click an empty

area of the desktop, and then:

●

If NVIDIA Control Panel is present, follow the steps under “NVIDIA

graphics cards.”

●

If Catalyst Control Center is present, follow the steps under “ATI graphics

cards.”

●

If only Screen resolution is present, follow the steps under “Other graphic

cards.”

6 Chapter 3 Setting up additional features

NVIDIA graphics

cards

1. Right-click an empty area of the desktop, and then click NVIDIA Control

Panel. The View Selection window opens.

2. In the Selecting a Task area on the left, under Display, click Change

resolution. The Change resolution window opens.

3. If your HP computer is connected to an HP monitor, make sure that the

Show only TV resolutions check box does not contain a check mark. If

your HP computer is connected to a non-HP monitor, make sure that the

Show only TV resolutions check box contains a check mark. If

necessary, click the box to remove a check mark or add a check mark.

4. Close the NVIDIA Control Panel. This completes the steps to adjust

resolution for NVIDIA graphics cards.

ATI graphics cards 1. Right-click an empty area of the desktop, and then click Catalyst™

Control Center. The Catalyst Control Center window opens.

2. Select Graphics and then Desktops & Displays on the top left corner

of the window.

3. Under the Desktops & Displays window, right click the monitor icon at

the bottom left corner of the window and select Configure. The DTV

(HDMITM) 2 window opens.

4. If your HP computer is connected to an HP monitor, make sure that the

Show only TV resolutions check box does not contain a check mark. If

your HP computer is connected to a non-HP monitor, make sure that the

Show only TV resolutions check box contains a check mark. If

necessary, click the box to remove a check mark or add a check mark.

5. Click OK. This completes the steps to adjust resolution for this option.

Other graphics cards 1. Right-click an empty area of the desktop, and then click Screen

resolution.

2. Select the resolution from the drop-down menu.

3. Click Apply, and then click Keep changes. This completes the steps to

adjust resolution for this option.

Setting up multiple displays

Use the following steps to connect and set up additional monitors:

These instructions are for standard two-monitor setup. If you have purchased a

dual-monitor system with ATI™ Eyefinity software, follow these instructions for

Setting up multiple displays

7

dual-monitor setup (or for three monitors), and proceed to the instructions for ATI

Eyefinity Catalyst™ setup.

1. Verify that the PC is set up according to the instructions in the setup view.

Do not power on the PC or monitor.

2. Connect the monitors to an available display connector on the back of the

PC. The monitor’s connection type must match the connector on the PC.

NOTE: The three-monitor setup requires that you separately purchase

an additional monitor and cable. The monitor should have a DVI, HDMI, or

VGA connector. A DVI-to-VGA adapter is required for monitors with a VGA

connector.

DVI

HDMI

DisplayPort

●

Connect the DisplayPort cable to the DisplayPort connector (required).

● Connect the DVI cable to the bottom DVI connector.

3. Connect power to each additional monitor.

4. Press the power button on each display and then press the power button on

the computer. The power indicator light on each of the displays will be

amber; the lights will turn blue when the PC starts.

NOTE: During the initial setup, only one display is active; you may see

various display states (such as blank screens, blue screens, etc.) on the

other displays until the setup is completed.

5. When the setup is complete, you will see the extended desktop on all

connected displays.

6. To change the display mode for a display, select Start, from the Start

screen, type c, select Control Panel, select Appearance and

Personalization, select Display, and then select the option you want to

change and follow the onscreen instructions.

ATI Eyefinity Catalyst™ setup

1. Right-click on the Eyefinity Catalyst™ icon on the desktop to bring up ATI

Catalyst Control Center™.

2. Select CCC-Advanced, select Graphics, and select Desktop & Displays,

then follow the onscreen instructions to set up the layout for the two- or

three-monitor display.

8 Chapter 3 Setting up additional features

4 Maintaining your computer

Cleaning procedures

Keeping your computer system free of dust, dirt, and heat will prolong its life.

● Dust, pet hair, and other particles can build up, creating a blanket effect; as a result, components can

overheat or, in the case of the keyboard and mouse, not work smoothly and effectively.

● Check your system once a month for visible signs of dust and debris, and clean it about once every three

months.

●

Visit

http://www.hp.com/go/contactHP for additional cleaning instructions.

Cleaning the computer

vents

Air vents keep the computer cool. Keep these vents clean by using a small,

battery-powered vacuum cleaner. (A battery-powered vacuum cleaner eliminates

the risk of electric shock.)

1. Vacuum the vents on the computer case.

2. Remove any debris that has accumulated in and around the computer

connectors (for example, the Ethernet and USB connectors).

Cleaning the keyboard and

mouse

When cleaning the keyboard keys, use a low setting on a battery-powered vacuum

cleaner, to avoid removing key caps and springs.

1. Vacuum between the keys of the keyboard and along the grooves.

2. Use a clean, dry cloth and isopropyl (rubbing) alcohol to clean buildup on the

keyboard keys and along its edges.

3. Wipe the body of the mouse and the mouse cord by using cleaning wipes.

If you have a roller-ball mouse, clean the ball and rollers inside:

1. Turn the mouse upside down, and rotate the ball-cover ring counterclockwise

to remove the ring and release the roller ball.

2. Rinse the roller ball with soap and warm water.

3. Clean the rollers inside the mouse with a cotton swab dampened with

isopropyl (rubbing) alcohol.

4. After the roller ball and rollers are completely dry, replace the ball and ball-

cover ring.

Cleaning procedures

9

5 Troubleshooting

Refer to the documentation provided by the product manufacturer for information

about peripheral-specific problems, such as issues with a monitor or a printer.

The following tables present some issues you might encounter while installing,

starting up, or using your computer and possible solutions.

For more information or for additional troubleshooting options, see

Getting

information on page 1.

Computer does not start

Symptom Possible solution

Error message:

Hard disk drive

error.

Restart the computer.

1. Press the Ctrl+Alt+Delete keys on the keyboard simultaneously.

2. Select the Power icon, and then select Restart.

Or, press and hold the Power button on the computer for 5 or more seconds to turn off

the computer, and then press the Power button to restart the computer.

3. If Windows opens, immediately back up all important data to a backup hard disk drive.

4. Contact Support, whether it was possible or not to start up Windows.

Either the hard disk drive or the system board may need to be replaced.

Computer will

not turn on or

start.

Ensure that the cables connecting the computer to the external power source are plugged in

properly. When the cables connecting the computer to the external power source are plugged

in properly, and the wall outlet is functioning, the green power supply light on the back of the

computer should be on; if it is not, contact Support.

If the display (monitor) is blank, the monitor might not be properly connected. Connect the

monitor to the computer, plug it in, and turn it on. See

Display (monitor) on page 12.

Test the wall outlet by connecting a different electrical device to it.

10 Chapter 5 Troubleshooting

Symptom Possible solution

Computer

seems to be

locked up and is

not responding.

Use the Task Manager to close any programs not responding, or restart the computer:

1. Press the Ctrl+Alt+Delete keys on the keyboard simultaneously.

2. Select Task Manager.

3. Select the program that is not responding, and then select End task.

If closing programs does not work, restart the computer:

1. Press the Ctrl+Alt+Delete keys on the keyboard simultaneously.

2. Select the Power icon, and then select Restart.

Or, press and hold the Power button on the computer for 5 or more seconds to turn off

the computer, and then press the Power button to restart the computer.

Error message:

Invalid system

disk or Non-

System disk or

Disk error.

When drive activity stops, remove the disc and press the spacebar on the keyboard. The

computer should start up.

Computer does not start

11

Power

Symptom Possible solution

Computer does

not turn off

when the Power

button is

pressed.

Press and hold the Power button until the computer turns off. Check Power Settings.

Computer shuts

down

automatically.

●

The computer might be in an exceedingly hot environment. Let it cool down.

●

Ensure that computer air vents are not blocked and that the internal fan is running —

see

Cleaning procedures on page 9. (Your computer might not have an internal fan.)

Display (monitor)

Symptom Possible solution

Screen is blank,

and monitor power

light is not lit.

Reconnect the power plug to the back of the monitor and to the wall outlet.

Press the Power button on the monitor.

Screen is blank. Press the space bar on the keyboard or move the mouse to make the screen display

visible again.

Press the Sleep button (select models only), or Esc on the keyboard, to resume from

Sleep mode.

Press the Power button to turn on the computer.

Inspect the monitor video connector for bent pins:

● If any of the pins are bent, replace the monitor connector cable.

●

If no pins are bent, reconnect the monitor connector cable to the computer.

If you have a multi-monitor setup, refer to

Setting up multiple displays on page 7.

12 Chapter 5 Troubleshooting

Keyboard and mouse (general)

Symptom Possible solution

Keyboard

commands and

typing are not

recognized by the

computer.

Use the mouse to turn off the computer, unplug and reconnect the keyboard to the back

of your computer, and then restart your computer.

Mouse (with cable)

does not work or is

not detected.

Unplug and reconnect the mouse cable to your computer.

If the mouse is still not detected, turn off the computer, unplug and reconnect the mouse

cable, and then restart the computer.

Cursor does not

move using the

arrow keys on the

number keypad.

Press Num Lock on the keyboard to turn off Num Lock, so that the arrow keys on the

number keypad can be used.

Cursor does not

respond to mouse

movement.

Use the keyboard to save changes in all open programs, and then restart your computer:

1. Press the Alt+Tab keys simultaneously to navigate to an open program.

2. Press Ctrl+S simultaneously to save your changes in the selected program (Ctrl+S

is the keyboard shortcut for Save on most—not all—programs).

3. Repeat step 1 and step 2 to save changes in all open programs.

4. After saving changes in all open programs, press the Power button to turn off the

computer.

5. After the shutdown is complete, unplug and reconnect the mouse connector to the

back of your computer, and then restart your computer.

Keyboard and mouse (general)

13

Keyboard and mouse (wireless)

Symptom Possible solution

Wireless keyboard

or mouse does not

work or is not

detected.

● Ensure that you are using the wireless keyboard or wireless mouse within range of

the receiver, approximately 3 meters (10 feet) for normal use, and within 30 cm (12

inches) during initial setup or for re-synchronization.

● Ensure that the mouse is not in Suspend mode, which occurs after 20 minutes of

inactivity. Click the left mouse button to reactivate it.

●

Replace the batteries in the keyboard and mouse.

● Re-synchronize the keyboard and mouse to the receiver using the following steps.

The receiver, wireless keyboard, and wireless mouse shown in the following illustrations

are examples; your models might vary. IMPORTANT: During these steps, place the

wireless keyboard and wireless mouse on the same level as the receiver, within 30 cm

(12 inches) of the receiver, and away from interference from other devices.

1. Unplug the receiver from a USB connector on the computer, and then reconnect it.

Your computer model might have a connector dedicated to the receiver. If you have

a choice, use a USB connector on the front of the computer.

2. Check that the mouse is on (A), and push and hold the Connect button (B) on the

underside of the mouse for 5 to 10 seconds until the LED on the receiver lights or

stops flashing. The receiver connection session times out after 60 seconds. To

ensure that the connection was established, and that the receiver did not time out

instead, move the mouse and check for response on the screen.

Off

On

Connect

A

B

3. After the mouse connection is established, continue by using the steps that follow to

repeat the procedure for the keyboard.

4. Push and hold the Connect button (C) on the underside of the keyboard for 5 to 10

seconds until the LED on the receiver lights or stops flashing.

C

14 Chapter 5 Troubleshooting

La page est en cours de chargement...

HP PAVILION 500-168EF Le manuel du propriétaire

HP PAVILION 500-168EF Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents