Lumination Allusion Louvers Guide d'installation

Lumination
Marque
Lumination
Modèle
Allusion Louvers
Taper
Guide d'installation
Lumination® Allusion
Louver Installation Supplement
Installation Guide
IND554
A-1024258
BEFORE YOU BEGIN
Read these instructions completely and carefully.
WARNING / AVERTISSEMENT
RISK OF ELECTRIC SHOCK
• Turn power o before inspection, installation or removal.
• Properly ground electrical enclosure.
RISK OF FIRE
• Follow all NEC and local codes.
• Use only UL approved wire for input/output connections.
Minimum size 18 AWG.
• Type IC, inherently protected.
RISQUES DE DÉCHARGES ÉLECTRIQUES
• Coupez l’alimentation avant d’’inspecter, installer ou déplacer le luminaire.
• Assurez-vous de correctement mettre à la terre le boîtier d’alimentation
électrique.
RISQUES D’INCENDIE
• Respectez tous les codes NEC et codes locaux.
• N’utilisez que des ls approuvés par UL pour les entrées/sorties de
connexion. Taille minimum 18 AWG.
• Type IC, protection inhérente.
Provided in the package:
Multiple louvers will be included in the packaging with each xture.
Louver Length = 11 inches
One used in every LALR Starter Fixtures
Louver Length = 12 inches
Used in LALR Continuous and LALS Fixtures
LED.com
© 2023 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change
without notice. All values are design or typical values when measured under laboratory conditions.
Page 1 of 2
(Rev 05/28/23)
IND554-Lumination-Allusion-Louver-Accessory-Install-Guide_R01
Installation
Place louver in xture as
shown and rotate into
position. Push gently to
engage hook.
1
Pull louver down so both
hooks engage the housing.
Louvers must hook into the
housing.
Troubleshooting
Slide louvers together so they
touch. Ensure all louvers are
facing the same direction.
Ensure louvers are facing the
same way
Louvers must hook into the
housing.
2 3
4
LED.com
© 2023 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change
without notice. All values are design or typical values when measured under laboratory conditions.
Page 2 of 2
(Rev 05/28/23)
IND554-Lumination-Allusion-Louver-Accessory-Install-Guide_R01
  • Page 1 1
  • Page 2 2

Lumination Allusion Louvers Guide d'installation

Lumination
Marque
Lumination
Modèle
Allusion Louvers
Taper
Guide d'installation
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents