Banner S2B Mode d'emploi

Banner
Marque
Banner
Modèle
S2B
Taper
Mode d'emploi
Important Information
For complete technical information about this product, including installation instructions, application requirements and guidelines, technical
specifications, and accessories, go to https://www.bannerengineering.com/us/en/lp/s2b-media-catalog.html to view the instruction manual.
Checkout cards are also available for download.
Product Family System Type Resolution - Defined Area - Termination
S2B1 E = Emitter only
R = Receiver only
30 = 30 mm 2025B = 2025 mm
2325B = 2325 mm
2500B = 2500 mm
P4P = 300 mm assembly with 4-Pin M8 quick-disconnect connector (Emitters)
P6P = 300 mm cable with 6-Pin M8 quick-disconnect connector (Receivers)
Example: S2B1E30-2025B-P4P
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge,
any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the
improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER
PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR
FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner
Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such
purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this
document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is
provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com.
For patent information, see www.bannerengineering.com/patents.
Contact Us
Banner Engineering Corp. headquarters is located at:
9714 Tenth Avenue North
Minneapolis, MN 55441, USA
Phone: + 1 888 373 6767
For worldwide locations and local representatives, visit www.bannerengineering.com.
Responsibilities of Qualified Personnel
To access the S2B Safety Light Curtain instruction manual (p/n 228093):
• Go to https://www.bannerengineering.com/us/en/lp/s2b-media-catalog.html to download the manual in the language you require; or
• Call Banner at 1-888-373-6767 or call your local Banner Representative to request a manual
WARNING:
It is the responsibility of the Qualified Personnel to:
• Carefully read, understand, and follow the information in the S2B instruction manual
• Perform a risk assessment of the specific machine guarding application
• Determine what risk reduction measures are appropriate per the results of the risk assessment
• Properly install, configure, and then verify that the risk reduction measures are working as intended
• Periodically re-verify, as needed, that the risk reduction measures are working as intended
Failure to follow any of these responsibilities may potentially create a dangerous condition that could lead to serious injury or
death.
Pour accéder au manuel d'utilisation S2B Safety Light Curtain (réf. 228093 ):
• Rendez-vous sur le site https://www.bannerengineering.com/us/en/lp/s2b-media-catalog.html pour télécharger le manuel dans la langue de
votre choix, ou
• Contactez Banner au 1-888-373-6767 ou appelez votre représentant Banner local pour demander le manuel.
WARNING:
Il incombe au personnel qualifié de:
• Lire avec attention, bien comprendre et suivre les instructions du manuel du système S2B
• Effectuer une évaluation des risques de l'application de protection spécifique à la machine
•Identifier les mesures de limitation du risque appropriées en fonction des résultats de l'étude de risques
• Installer et configurer correctement le ou les dispositifs de protection destinés à limiter le risque puis vérifier qu’ils
fonctionnent de la façon prévue
•Revérifier périodiquement, s'il y a lieu, que ces dispositifs de protection fonctionnent toujours comme il se doit
Le non-respect de l'une de ces responsabilités peut potentiellement créer une condition dangereuse pouvant entraîner des
blessures graves, voire mortelles.
So beziehen Sie die Bedienungsanleitung für den S2B Safety Light Curtain (Ident-Nr. 228093):
• Laden Sie die Anleitung in der gewünschten Sprache von unserer Website (https://www.bannerengineering.com/us/en/lp/s2b-media-
catalog.html) herunter oder
• fordern Sie die Anleitung telefonisch bei der Banner-Hotline unter der Rufnummer +1-888-373-6767 oder bei einer Banner-Vertretung in
Ihrer Nähe an.
S2B Safety Light Curtain
Original Document
226573 Rev. A 19 May 2022
226573
WARNING:
Es liegt in der Verantwortung des qualifizierten Personals,
• Die Informationen in der Anleitung für den S2B gründlich durchzulesen, zu verstehen und zu befolgen
• Eine Risikobeurteilung der spezifischen Maschinenschutzanwendung durchzuführen
• Ermitteln, welche Maßnahmen zur Risikominderung aufgrund der Ergebnisse der Risikobeurteilung angemessen sind
• Das gesamte Schutzsystem fachgerecht installieren, konfigurieren und anschließend auf die bestimmungsgemäße
Funktion überprüfen
• Je nach Bedarf regelmäßig nachprüfen, ob die Maßnahmen zur Risikominderung wie beabsichtigt funktionieren
Die Nichtbeachtung einer dieser Verantwortlichkeiten kann zu gefährlichen Zuständen führen, die zu schweren oder tödlichen
Verletzungen führen können.
Per accedere al manuale di istruzioni dello S2B Safety Light Curtain (codice 228093):
• Andare al sito https://www.bannerengineering.com/us/en/lp/s2b-media-catalog.html per scaricare il manuale nella lingua desiderata; oppure
• Contattare Banner al numero telefonico 1-888-373-6767 oppure il rappresentante Banner locale per richiedere un manuale
WARNING:
È responsabilità della Personale Qualificato:
• Leggere attentamente, assicurarsi di avere compreso e seguire le indicazioni riportate nel manuale di istruzioni del
S2B
• Eseguire una valutazione dei rischi dell'applicazione di protezione della macchina specifica
• Determinare quali misure di riduzione del rischio sono appropriate in base ai risultati della valutazione del rischio
• Installare e configurare correttamente il sistema, quindi verificare che le misure di riduzione del rischio assicurino i
risultati previsti
• Ricontrollare periodicamente, in base alla necessità, che tali misure di riduzione del rischi continuino ad assicurare i
risultati previsti
La mancata osservanza di una qualsiasi di queste responsabilità può potenzialmente creare una condizione pericolosa che
potrebbe causare lesioni gravi o mortali.
Para obtener el manual de instrucciones del S2B Safety Light Curtain (p/n 228093):
• Visite https://www.bannerengineering.com/us/en/lp/s2b-media-catalog.html para descargar el manual en el idioma que necesite; o
• Llame a Banner al 1-888-373-6767 o llame a su representante local de Banner para solicitar un manual
WARNING:
Es responsabilidad del personal calificado:
• Leer con atención, entender y seguir la información en el manual de instrucciones de la S2B
• Realizar una evaluación de riesgos que incluya la aplicación de protección de la máquina específica
• Determinar qué medidas de reducción de riesgos son apropiadas según los resultados de la evaluación de riesgos
• Instale, configure y luego verifique correctamente que las medidas de reducción de riesgos funcionan según lo
previsto
• Vuelva a verificar periódicamente, según sea necesario, que las medidas de reducción de riesgos funcionan según lo
previsto
El incumplimiento de cualquiera de estas responsabilidades puede crear potencialmente una condición peligrosa que podría
provocar lesiones graves o la muerte.
S2B Safety Light Curtain
© Banner Engineering Corp. All rights reserved
  • Page 1 1
  • Page 2 2

Banner S2B Mode d'emploi

Banner
Marque
Banner
Modèle
S2B
Taper
Mode d'emploi
Télécharger le PDF
rapport

dans d''autres langues

Autres documents