Electrolux ESF5201LOW Manuel utilisateur

ESF5201LOW

ESF5201LOX

EN DISHWASHER USER MANUAL 2

ET NÕUDEPESUMASIN KASUTUSJUHEND 20

FR LAVE-VAISSELLE NOTICE D'UTILISATION 39

CONTENTS

1. SAFETY INFORMATION...................................................................................... 3

2. SAFETY INSTRUCTIONS.....................................................................................4

3. PRODUCT DESCRIPTION................................................................................... 6

4. CONTROL PANEL...............................................................................................7

5. PROGRAMMES...................................................................................................8

6. SETTINGS........................................................................................................... 8

7. BEFORE FIRST USE..........................................................................................10

8. DAILY USE........................................................................................................ 11

9. HINTS AND TIPS............................................................................................... 13

10. CARE AND CLEANING....................................................................................14

11. TROUBLESHOOTING......................................................................................15

12. TECHNICAL INFORMATION............................................................................19

WE’RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that

brings with it decades of professional experience and innovation. Ingenious and

stylish, it has been designed with you in mind. So whenever you use it, you can be

safe in the knowledge that you’ll get great results every time.

Welcome to Electrolux.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.electrolux.com

Register your product for better service:

www.registerelectrolux.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.electrolux.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the following

data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

www.electrolux.com2

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully

read the supplied instructions. The manufacturer is not

responsible if an incorrect installation and use causes

injuries and damages. Always keep the instructions with

the appliance for future reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved.

• Do not let children play with the appliance.

• Keep all detergents away from children.

• Keep children and pets away from the appliance door

when it is open.

• Cleaning and user maintenance shall not be made by

children without supervision.

1.2 General Safety

• This appliance is intended to be used in household and

similar applications such as:

– farm houses; staff kitchen areas in shops, offices and

other working environments;

– by clients in hotels, motels, bed & breakfast and

other residential type environments.

• Do not change the specification of this appliance.

• The operating water pressure (minimum and maximum)

must be between 0.5 (0.05) / 8 (0.8) bar (Mpa)

• Obey the maximum number of 13 place settings.

• If the supply cord is damaged, it must be replaced by

the manufacturer, its Authorised Service Centre or

similarly qualified persons in order to avoid a hazard.

• Put knives and cutlery with sharp points in the cutlery

basket with the points down or in a horizontal position.

ENGLISH

3

• Do not keep the appliance door open without

supervision to prevent to fall on it.

• Before maintenance, deactivate the appliance and

disconnect the mains plug from the mains socket.

• Do not use water spray and steam to clean the

appliance.

• The ventilation openings in the base (if applicable) must

not be obstructed by a carpet.

• The appliance is to be connected to the water mains

using the new supplied hose-sets. Old hose sets must

not be reused.

2. SAFETY INSTRUCTIONS

2.1 Installation

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Do not install or use the appliance

where the temperature is less than 0

°C.

• Obey the installation instruction

supplied with the appliance.

• Make sure that the appliance is

installed below and adjacent to safe

structures.

2.2 Electrical connection

WARNING!

Risk of fire and electrical

shock.

• The appliance must be earthed.

• Make sure that the electrical

information on the rating plate agrees

with the power supply. If not, contact

an electrician.

• Always use a correctly installed

shockproof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug and to the mains cable.

Should the mains cable need to be

replaced, this must be carried out by

our Authorised Service Centre.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• This appliance complies with the E.E.C.

Directives.

• Only for UK and Ireland. The appliance

has a 13 amp mains plug. If it is

necessary to change the fuse in the

mains plug, use fuse: 13 amp ASTA

(BS 1362).

2.3 Water connection

• Make sure not to cause damage to the

water hoses.

• Before you connect the appliance to

new pipes or pipes not used for a long

time, let the water flow until it is clean.

• The first time you use the appliance,

make sure that there is no leakage.

• The water inlet hose has a safety valve

and a sheath with an inner mains

cable.

www.electrolux.com4

WARNING!

Dangerous voltage.

• If the water inlet hose is damaged,

immediately disconnect the mains plug

from the mains socket. Contact the

Authorised Service Centre to replace

the water inlet hose.

2.4 Use

• Do not sit or stand on the open door.

• Dishwasher detergents are dangerous.

Obey the safety instructions on the

detergent packaging.

• Do not drink and play with the water in

the appliance.

• Do not remove the dishes from the

appliance until the programme is

completed. There can be detergent on

the dishes.

• The appliance can release hot steam if

you open the door while a programme

operates.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

2.5 Service

• Contact the Authorised Service Centre

to repair the appliance. We

recommend only the use of original

spare parts.

• When you contact the Authorised

Service Centre, ensure that you have

the following information that is

available on the rating plate.

Model :

PNC :

Serial Number :

2.6 Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent

children and pets to get closed in the

appliance.

ENGLISH

5

3. PRODUCT DESCRIPTION

5

4

8

10

9

11

67

12

2

3

1

Worktop

2

Upper spray arm

3

Lower spray arm

4

Filters

5

Rating plate

6

Salt container

7

Air vent

8

Rinse aid dispenser

9

Detergent dispenser

10

Cutlery basket

11

Lower basket

12

Upper basket

www.electrolux.com6

4. CONTROL PANEL

1 2 3

456

1

On/off indicator

2

Programme marker

3

Indicators

4

Delay button

5

Start button

6

Programme knob

4.1 Indicators

Indicator Description

Washing phase. It comes on when the washing phase operates.

Drying phase. It comes on when the drying phase operates.

End indicator.

Salt indicator. It is always off while the programme operates.

Rinse aid indicator. It is always off while the programme operates.

ENGLISH

7

5. PROGRAMMES

Programme Degree of soil

Type of load

Programme

phases

Consumption values

1)

Duration

(min)

Energy

(kWh)

Water

(l)

2)

Normal soil

Crockery and

cutlery

• Prewash

• Wash 50 °C

• Rinses

• Dry

195 1.039 11

3)

Heavy soil

Crockery, cut-

lery, pots and

pans

• Prewash

• Wash 70 °C

• Rinses

• Dry

150 - 170 1.5 - 1.6 13 - 15

Normal soil

Crockery and

cutlery

• Prewash

• Wash 65 °C

• Rinses

• Dry

120 - 130 1.3 - 1.6 15 - 17

4)

Fresh soil

Crockery and

cutlery

• Wash 60 °C

or 65 °C

• Rinses

30 0.8 9

5)

All • Prewash 14 0.1 4

1)

The pressure and the temperature of the water, the variations of the mains supply, the op-

tions and the quantity of dishes can change the values.

2)

With this programme you have the most efficient use of water and energy consumption for

crockery and cutlery with normal soil. (This is the standard programme for test institutes).

3)

This programme has a high temperature rising phase for better hygiene results. During the

rinsing phase, the temperature stays at 70 °C for at least 10 minutes.

4)

With this programme you can wash a load with fresh soil. It gives good washing results in a

short time.

5)

Use this programme to quickly rinse the dishes. this prevents the remaining food to bond on

the dishes and bad odours to come out from the appliance. Do not use detergent with this

programme.

5.1 Information for test institutes

For all the necessary information for test

performance, send an email to:

[email protected]

Write down the product number (PNC)

that is on the rating plate.

6. SETTINGS

6.1 Programme selection mode

and user mode

When the appliance is in programme

selection mode it is possible to set a

programme and to enter the user mode.

In user mode, the following settings

can be changed:

• The level of the water softener

according to the water hardness.

These settings will be saved until you

change them again.

www.electrolux.com8

How to set the programme

selection mode

The appliance is in programme selection

mode when the on/off indicator comes on

and start indicator starts to flash.

When you activate the appliance, usually it

is in programme selection mode.

However, if this does not happen, you can

set the programme selection mode in the

following way:

Press and hold simultaneously Start and

Delay until the appliance is in programme

selection mode.

6.2 The water softener

The water softener removes minerals from

the water supply, which would have a

detrimental effect on the washing results

and on the appliance.

The higher the content of these minerals,

the harder your water is. Water hardness

is measured in equivalent scales.

The water softener should be adjusted

according to the hardness of the water in

your area. Your local water authority can

advise you on the hardness of the water in

your area. It is important to set the right

level of the water softener to assure good

washing results.

Water hardness

German de-

grees (°dH)

French de-

grees (°fH)

mmol/l Clarke de-

grees

Water softener

level

47 - 50 84 - 90 8.4 - 9.0 58 - 63 10

43 - 46 76 - 83 7.6 - 8.3 53 - 57 9

37 - 42 65 - 75 6.5 - 7.5 46 - 52 8

29 - 36 51 - 64 5.1 - 6.4 36 - 45 7

23 - 28 40 - 50 4.0 - 5.0 28 - 35 6

19 - 22 33 - 39 3.3 - 3.9 23 - 27

5

1)

15 - 18 26 - 32 2.6 - 3.2 18 - 22 4

11 - 14 19 - 25 1.9 - 2.5 13 - 17 3

4 - 10 7 - 18 0.7 - 1.8 5 - 12 2

<4 <7 <0.7 < 5

1

2)

1)

Factory setting.

2)

Do not use salt at this level.

If you use multi-tablets containing salt and

the hardness of your water is lower than

21dH, you can set the lowest water

softener level. It deactivates the salt refill

indicator.

If you use standard detergent or

multi-tablets without salt, set the

proper water hardness level to keep

the salt refill indicator active.

How to set the water softener

level

The appliance must be in programme

selection mode.

1. Make sure that the programme marker

on the knob is aligned with the

indicator on/off .

ENGLISH

9

2. To enter the user mode, press and

hold Delay. At the same time turn the

knob counterclockwise until the

programme marker is aligned with the

first programme. Release Delay when

the indicators Start and on/off start to

flash.

3. Press Delay.

• The indicator starts to flash.

• The indicators Start and on/off

continues to flash.

• The intermittent flashing of

refers to the current set level, e.g.

5 flashes + pause + 5 flashes =

level 5.

4. Press Delay again and again to

change the setting. Each time you

press Delay the level number

increases. After level 10 you will start

again from level 1.

5. Turn knob to on/off position to confirm

the setting.

7. BEFORE FIRST USE

1. Make sure that the current level of

the water softener agrees with the

hardness of the water supply. If

not, adjust the level of the water

softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any

processing residuals that can still be

inside the appliance. Do not use

detergent and do not load the

baskets.

When you start a programme, the

appliance can take up to 5 minutes to

recharge the resin in the water softener. It

seems that the appliance is not working.

The washing phase starts only after this

procedure is completed. The procedure

will be repeated periodically.

7.1 The salt container

CAUTION!

Only use salt specifically

designed for dishwashers.

The salt is used to recharge the resin in

the water softener and to assure good

washing results in the daily use.

How to fill the salt container

1. Turn the cap of the salt container

counterclockwise and remove it.

2. Put 1 litre of water in the salt container

(Only for the first time).

3. Fill the salt container with dishwasher

salt.

4. Remove the salt around the opening

of the salt container.

5. Turn the cap of the salt container

clockwise to close the salt container.

Water and salt can come out

from the salt container when

you fill it. Risk of corrosion. To

prevent it, after you fill the salt

container, start a programme.

www.electrolux.com10

7.2 How to fill the rinse aid

dispenser

A

B

D

C

M

A

X

1

2

3

4

+

-

A

B

D

C

CAUTION!

Only use rinse aid specifically

designed for dishwashers.

1. Press the release button (D) to open

the lid (C).

2. Pour the rinse aid in the dispenser (A)

until the liquid reaches the fill level

'max'.

3. Remove the spilled rinse aid with an

absorbent cloth to prevent too much

foam.

4. Close the lid. Make sure that the

release button locks into position.

You can turn the selector of

the released quantity (B)

between position 1 (lowest

quantity) and position 4 or 6

(highest quantity).

8. DAILY USE

1. Open the water tap.

2. Turn the knob until the programme

marker is aligned with the programme

you want to set. Set the correct

programme for the type of load and

the degree of soil.

• If the salt indicators is on, fill the

salt container.

• If the rinse aid indicator is on, fill

the rinse aid dispenser.

3. Load the baskets.

4. Add the detergent.

5. Start the programme.

8.1 Using the detergent

30

20

A BD

C

ENGLISH

11

20

30

B

A D

C

1. Press the release button (B) to open

the lid (C).

2. Put the detergent, in powder or

tablets, in the compartment (A).

3. If the programme has a prewash

phase, put a small quantity of

detergent in the compartment (D).

4. Close the lid. Make sure that the

release button locks into position.

8.2 Using the multi-tablets

When you use tablets, that contain salt

and rinse aid, do not fill the salt container

and the rinse aid dispenser.

1. Adjust the water softener to the lowest

level.

2. Set the rinse aid dispenser to the

lowest position.

8.3 Setting and starting a

programme

Starting a programme

1. Open the water tap.

2. Close the appliance door.

3. Turn the knob until the programme

marker is aligned with the programme

you want to set.

• On/off indicator comes on.

• Start indicator starts to flash.

4. Press Start.

• The programme starts and the

indicator of the washing phase is

on.

• On/off indicator and start indicator

are on.

Starting a programme with delay

start

1. Set the programme.

2. Press Delay to delay the start of the

programme of 3 hours.

The delay indicator comes on.

3. Press Start.

Start indicator comes on.

When the countdown is completed, the

programme starts.

Opening the door while the

appliance operates

If you open the door while a programme is

running, the appliance stops. It may affect

the energy consumption and the

programme duration. When you close the

door, the appliance continues from the

point of interruption.

Cancelling the delay start while

the countdown operates

1.

Press and hold Start and Delay until

the start indicator starts to flash.

2. Press Start to start the programme.

Cancelling the programme

Press and hold Start and Delay until the

start indicator starts to flash.

Make sure that there is detergent in the

detergent dispenser before you start a

new programme.

End of the programme

When the programme is completed the

indicator is on. If you do not

deactivate the appliance within 5 minutes

all indicators goes off. This helps to

decrease energy consumption.

1. To deactivate the appliance, turn the

knob until the programme marker is

aligned with the on/off indicator.

2. Close the water tap.

www.electrolux.com12

9. HINTS AND TIPS

9.1 General

The following hints will ensure optimal

cleaning and drying results in daily use

and also help to protect the environment.

• Remove larger residues of food from

the dishes into the waste bin.

• Do not pre-rinse dishes by hand. When

needed, use the prewash programme

(if available) or select a programme with

a prewash phase.

• Always use the whole space of the

baskets.

• When loading the appliance, make

sure that the dishes can be completely

reached and washed by the water

released from the spray arm nozzles.

Make sure that items do not touch or

cover each other.

• You can use dishwasher detergent,

rinse aid and salt separately or you can

use the multi-tablets (e.g. ''3in1'',

''4in1'', ''All in 1''). Follow the

instructions written on the packaging.

• Select the programme according to the

type of load and degree of soil. With

the ECO programme you have the

most efficient use of water and energy

consumption for crockery and cutlery

with normal soil.

9.2 Using salt, rinse aid and

detergent

• Only use salt, rinse aid and detergent

for dishwasher. Other products can

cause damage to the appliance.

• Multi-tablets are usually suitable in

areas with a water hardness up to 21

°dH. In areas exceeding this limit, rinse

aid and salt must be used in addition to

the multi-tablets. However, in areas

with hard and very hard water we

recommend to use solo-detergent

(powder, gel, tablets without additional

functions), rinse aid and salt separately

for optimal cleaning and drying results.

• Detergent tablets do not fully dissolve

with short programmes. To prevent

detergent residues on the tableware,

we recommend that you use the

tablets with long programmes.

• Do not use more than the correct

quantity of detergent. Refer to the

instructions on the detergent

packaging.

9.3 What to do if you want to

stop using multi-tablets

Before you start to use separately

detergent, salt and rinse aid do the

following procedure.

1. Set the highest level of the water

softener.

2. Make sure that the salt and rinse aid

containers are full.

3. Start the shortest programme with a

rinsing phase. Do not add detergent

and do not load the baskets.

4. When the programme is completed,

adjust the water softener according to

the water hardness in your area.

5. Adjust the released quantity of rinse

aid.

6. Activate the rinse aid dispenser.

9.4 Loading the baskets

• Only use the appliance to wash items

that are dishwasher-safe.

• Do not put in the appliance items made

of wood, horn, aluminium, pewter and

copper.

• Do not put in the appliance items that

can absorb water (sponges, household

cloths).

• Remove larger residues of food from

the dishes into the waste bin.

• Make soft the remaining burned food

on the items.

• Put hollow items (cups, glasses and

pans) with the opening down.

• Make sure that glasses do not touch

other glasses.

• Put cutlery and small items in the

cutlery basket.

• Put light items in the upper basket.

Make sure that the items do not move.

• Make sure that the spray arms can

move freely before you start a

programme.

ENGLISH

13

9.5 Before starting a programme

Make sure that:

• The filters are clean and correctly

installed.

• The cap of the salt container is tight.

• The spray arms are not clogged.

• There is dishwasher salt and rinse aid

(unless you use multi- tablets).

• The position of the items in the baskets

is correct.

• The programme is applicable for the

type of load and for the degree of soil.

• The correct quantity of detergent is

used.

9.6 Unloading the baskets

1. Let the tableware cool down before

you remove it from the appliance. Hot

items can be easily damaged.

2. First remove items from the lower

basket, then from the upper basket.

At the end of the programme

water can still remain on the

sides and on the door of the

appliance.

10. CARE AND CLEANING

WARNING!

Before maintenance,

deactivate the appliance and

disconnect the mains plug

from the main socket.

Dirty filters and clogged spray

arms decrease the washing

results. Make a check

regularly and, if necessary,

clean them.

10.1 Cleaning the filters

The filter system is made of 3 parts.

C

B

A

1. Turn the filter (B) counterclockwise

and remove it.

2. Remove the filter (C) out of filter (B).

3. Remove the flat filter (A).

4. Wash the filters.

www.electrolux.com14

5. Make sure that there are no residues

of food or soil in or around the edge of

the sump.

6. Put back in place the flat filter (A).

Make sure that it is correctly

positioned under the 2 guides.

7. Reassemble the filters (B) and (C).

8. Put back the filter (B) in the flat filter

(A). Turn it clockwise until it locks.

CAUTION!

An incorrect position of the

filters can cause bad washing

results and damage to the

appliance.

10.2 Cleaning the spray arms

Do not remove the spray arms. If the holes

in the spray arms are clogged, remove

remaining parts of soil with a thin pointed

object.

10.3 External cleaning

• Clean the appliance with a moist soft

cloth.

• Only use neutral detergents.

• Do not use abrasive products, abrasive

cleaning pads or solvents.

10.4 Internal cleaning

• Carefully clean the appliance, including

the rubber gasket of the door, with a

soft damp cloth.

• If you regularly use short duration

programmes, these can leave deposits

of grease and limescale inside the

appliance. To prevent this, we

recommend to run long duration

programmes at least 2 times per

month.

• To maintain the performance of your

appliance at its best, we recommend

to use monthly a specific cleaning

product for dishwashers. Follow

carefully the instructions on the

packaging of the product.

11. TROUBLESHOOTING

If the appliance does not start or it stops

during operation, before you contact an

ENGLISH

15

Authorised Service Centre, check if you

can solve the problem by yourself with the

help of the information in the table.

WARNING!

Repairs not properly done

may result in serious risk to

the safety of the user. Any

repairs must be performed by

qualified personnel.

With some problems the end indicator

flashes intermittently indicating a

malfunction.

The majority of problems that can

occur can be solved without the need

to contact an Authorised Service

Centre.

Problem and alarm code Possible cause and solution

You cannot activate the appliance. • Make sure that the mains plug is connected

to the mains socket.

• Make sure that there is no damaged fuse in

the fuse box.

The programme does not start. • Make sure that the appliance door is closed.

• Press Start.

• If the delay start is set, cancel the setting or

wait for the end of the countdown.

• The appliance has started the procedure to

recharge the resin inside the water softener.

The duration of the procedure is approxi-

mately 5 minutes.

The appliance does not fill with wa-

ter.

• The end indicator flashes 1 time

intermittently.

• The Start indicator flashes contin-

uously.

• Make sure that the water tap is open.

• Make sure that the pressure of the water

supply is not too low. For this information,

contact your local water authority.

• Make sure that the water tap is not clogged.

• Make sure that the filter in the inlet hose is

not clogged.

• Make sure that the inlet hose has no kinks or

bends.

The appliance does not drain the wa-

ter.

• The end indicator flashes 2 times

intermittently.

• The Start indicator flashes contin-

uously.

• Make sure that the sink spigot is not clog-

ged.

• Make sure that the drain hose has no kinks

or bends.

The anti-flood device is on.

• The end indicator flashes 3 times

intermittently.

• The Start indicator flashes contin-

uously.

• Close the water tap and contact an Author-

ised Service Centre.

The appliance stops and starts more

times during operation.

• It is normal. It provides optimal cleaning re-

sults and energy savings.

www.electrolux.com16

Problem and alarm code Possible cause and solution

The program lasts too long. • If the delayed start option is set, cancel the

delay setting or wait for the end of the count-

down.

Small leak from the appliance door. • The appliance is not level. Loosen or tighten

the adjustable feet (if applicable).

• The appliance door is not centred on the tub.

Adjust the rear foot (if applicable).

The appliance door is difficult to

close.

• The appliance is not level. Loosen or tighten

the adjustable feet (if applicable).

• Parts of the tableware are protruding from

the baskets.

Rattling/knocking sounds from inside

the appliance.

• The tableware is not properly arranged in the

baskets. Refer to basket loading leaflet.

• Make sure that the spray arms can rotate

freely.

The appliance trips the circuit-beak-

er.

• The amperage is insufficient to supply simul-

taneously all the appliances in use. Check the

socket amperage and the capacity of the

meter or turn off one of the appliances in use.

• Internal electrical fault of the appliance. Con-

tact an Authorised Service Centre.

Refer to "Before first use",

"Daily use", or "Hints and

tips" for other possible

causes.

Once you have checked the appliance,

press Start. If the problem occurs again,

contact an Authorised Service Centre.

For alarm codes not described in the

table, contact an Authorised Service

Centre.

11.1 The washing and drying results are not satisfactory

Problem Possible cause and solution

Poor washing results. • Refer to "Daily use", "Hints and tips" and basket

loading leaflet.

• Use more intensive washing programmes.

Poor drying results. • Tableware has been left for too long inside a closed

appliance.

• There is no rinse aid or the dosage of rinse aid is not

enough. Set the rinse aid dispenser to a higher level.

• Plastic items may need to be towel dried.

• We recommend to always use rinse aid, even in

combination with multi-tablets.

ENGLISH

17

Problem Possible cause and solution

There are whitish streaks or

bluish layers on glasses and

dishes.

• The release quantity of rinse aid is too much. Adjust

the rinse aid level to a lower level.

• The quantity of detergent is too much.

There are stains and dry wa-

ter drops on glasses and

dishes.

• The released quantity of rinse aid is not sufficient.

Adjust the rinse aid level to a higher level.

• The quality of the rinse aid can be the cause.

The dishes are wet. • The programme does not have a drying phase or

has a drying phase with low temperature.

• The rinse aid dispenser is empty.

• The quality of the rinse aid can be the cause.

• The quality of the multi-tablets can be the cause. Try

a different brand or activate the rinse aid dispenser

and use rinse aid and multi-tablets together.

The interior of the appliance

is wet.

• This is not a defect of the appliance. it is caused by

the humidity in the air that condenses on the walls.

Unusual foam during wash-

ing.

• Use the detergent for dishwashers only.

• There is a leak in the rinse aid dispenser. Contact an

Authorised Service Centre.

Traces of rust on cutlery. • There is too much salt in the water used for washing.

Refer to "The water softener".

• Silver and stainless steel cutlery were placed togeth-

er. Avoid to put silver and stainless steel items close

together.

There are residues of deter-

gent in the dispenser at the

end of the programme.

• The detergent tablet got stuck in the dispenser and

therefore was not completely washed away by wa-

ter.

• Water cannot wash away the detergent from the dis-

penser. Make sure that the spray arm is not blocked

or clogged.

• Make sure that items in the baskets do not impede

the lid of the detergent dispenser from opening.

Odours inside the appliance. • Refer to "Internal cleaning".

Limescale deposits on the ta-

bleware, on the tub and on

the inside of the door.

• Refer to "The water softener".

Dull, discoloured or chipped

tableware.

• Make sure that only dishwasher-safe items are

washed in the appliance.

• Load and unload the basket carefully. Refer to bas-

ket loading leaflet.

• Place delicate items in the upper basket.

Refer to "Before first use",

"Daily use" or "Hints and

tips" for other possible

causes.

www.electrolux.com18

12. TECHNICAL INFORMATION

Dimensions Width / height / depth

(mm)

600 / 850 / 625

Electrical connection

1)

Voltage (V) 220 - 240

Frequency (Hz) 50

Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8)

Water supply

Cold water or hot water

2)

max 60 °C

Capacity Place settings 13

Power consumption Left-on mode (W) 0.50

Power consumption Off-mode (W) 0.50

1)

Refer to the rating plate for other values.

2)

If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy),

use the hot water supply to decrease energy consumption.

13. ENVIRONMENT CONCERNS

Recycle the materials with the symbol .

Put the packaging in applicable containers

to recycle it. Help protect the environment

and human health and to recycle waste of

electrical and electronic appliances. Do

not dispose appliances marked with the

symbol with the household waste.

Return the product to your local recycling

facility or contact your municipal office.

ENGLISH

19

SISUKORD

1. OHUTUSINFO.................................................................................................. 21

2. OHUTUSJUHISED........................................................................................... 22

3. SEADME KIRJELDUS......................................................................................24

4. JUHTPANEEL.................................................................................................. 25

5. PROGRAMMID.................................................................................................26

6. SEADED........................................................................................................... 27

7. ENNE ESIMEST KASUTAMIST....................................................................... 28

8. IGAPÄEVANE KASUTAMINE.......................................................................... 29

9. VIHJEID JA NÄPUNÄITEID..............................................................................31

10. PUHASTUS JA HOOLDUS............................................................................ 32

11. VEAOTSING...................................................................................................34

12. TEHNILISED ANDMED.................................................................................. 37

SULLE MÕELDES

Täname teid selle Electroluxi seadme ostmise eest. Olete valinud toote, mille

loomisel on rakendatud pikaaegset asjatundlikku kogemust ja uuenduslikkust.

Nutika ja stiilse disaini kõrval ei ole unustatud ka teid. Ükskõik, millal te seda ka ei

kasuta – suurepärastes tulemustes võite te alati kindel olla.

Teretulemast Electroluxi.

Külastage meie veebisaiti:

Kasutusnõuanded, brošüürid, veaotsing, teave teeninduse kohta:

www.electrolux.com

Registreerige oma toode parema teeninduse saamiseks:

www.registerelectrolux.com

Ostke lisaseadmeid, tarvikuid ja originaalvaruosi:

www.electrolux.com/shop

KLIENDITEENINDUS

Soovitame alati kasutada originaalvaruosi.

Teenindusse pöördumisel peaksid teil olema varuks järgmised andmed. Mudel,

tootenumber (PNC), seerianumber.

Andmed leiate andmesildilt.

Hoiatus / oluline ohutusinfo

Üldine informatsioon ja nõuanded

Keskkonnateave

Jäetakse õigus teha muutusi.

www.electrolux.com20

La page est en cours de chargement...

Electrolux ESF5201LOW Manuel utilisateur

Ce manuel convient également à

Electrolux ESF5201LOW Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents