EQTemp VT125 Le manuel du propriétaire

Marque: EQTemp

Modèle: VT125

Taper: Le manuel du propriétaire

MODELS / MODÈLES :

 CP171MED – AccuCold

Two-door refrigerator-freezer with two compressors

Réfrigérateur-congélateur avec deux portes et deux compresseurs

 FCL44 / SCF401SS MED Series – AccuCold

Chest freezers / Congélateurs horizontaux

 SCFF55 / SCFF51OSWH MED Series – AccuCold

Built-in frost-free freezers / Congélateurs sans givre encastrés

 SCFF/ SCFR Series – AccuCold

Frost-free chest freezers and refrigerators

Congélateurs et réfrigérateurs horizontaux sans givre

 SCUF18/20 / SCUR18/20 Series – Summit Commercial

Full-size frost-free all-freezers and all-refrigerators

Congélateurs et réfrigérateurs grand format sans givre

 VT/ VLT Series – AccuCold

Low temperature freezers / Congélateurs à basse température

MEDICAL, LABORATORY AND SCIENTIFIC REFRIGERATORS AND FREEZERS

RÉFRIGÉRATEURS ET CONGÉLATEURS POUR USAGES MEDICAUX,

SCIENTIFIQUES ET EN LABORATOIRE

If you need service or call with a question, please have this

information ready.

Si vous avez besoin de service ou si vous appelez avec une

question, s'il vous plaît disposer de ces informations prêtes.

Model / Modéle: Serial no.:_________________

Options added /

Options qui ont été ajoutées: ______________________________

Date of purchase / Date d'achat: __________________________

Dealer / Revendeur : ____________________________________

For parts: visit our website / Pour les pièces: visitez notre site Web:

www.summitappliance.com/support

USE & CARE GUIDE / MODE D’EMPLOI

Felix Storch, Inc.

ISO 9001:2015 Registered

770 Garrison Avenue

Bronx, New York 10474

www.accucold.com

APPLIANCE SAFETY

Your safety and the safety of others are very important to us.

We have provided many important safety messages in this manual and

on your appliance. Always read and obey all safety messages.

You can be seriously injured or even killed if you don’t follow instructions.

Safety messages will tell you what the potential hazard is, how to reduce

the chance of injury, and what can happen if the instructions are not

followed.

 Plug into a grounded 3-prong outlet.

 Do not remove ground prong, nor use a 3/2 adapter.

 Do not use an extension cord.

 Use care not to plug into outlets controlled by wall switches.

 Disconnect power before servicing.

 After servicing, replace all parts and panels before operating.

 Use nonflammable cleaners.

 Keep flammable materials and vapors, such as gasoline, away from

appliances.

 Use two or more people to move and install appliance.

Drawer refrigerators are provided with anti-tip brackets. Always install

prior to use.

Proper Disposal of Your Old Appliance e

Old appliances can represent a suffocation hazard to children.

Remove doors from your old appliance.

Leave shelves in place.

If an old appliance contains refrigerants, it must be recycled by a licensed

service or disposal company.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury

when using your appliance, follow these basic precautions:

Felix Storch, Inc.

Page 2

Page 2 Page 2

INSTALLATION INSTRUCTIONS

Excessive Weight Hazard !

Use two or more people to move and install your appliance.

Failure to do so can result in back or other injury.

CAUTION: YOU MUST ALLOW APPLIANCE TO SIT UPRIGHT FOR 24 HOURS

BEFORE TURNING ON, TO ALLOW THE COMPRESSOR LUBRICANT TO

DRAIN. FAILURE TO DO SO MAY ADVERSELY AFFECT PERFORMANCE

AND THE LIFETIME OF THE UNIT.

1. Remove packaging materials.

2. Remove tape and glue residue from surfaces before turning on the

appliance. Rub a small amount of liquid dish soap over the adhesive

with your fingers. Rinse with warm water and dry.

3. Do not use sharp instruments, rubbing alcohol, flammable fluids, or

abrasive cleaners to remove tape or glue. These products can

damage the surface of your appliance.

4. When Moving Your Appliance:

Your appliance is heavy. When moving the appliance for cleaning or

service, be sure to protect the floor. Always pull the appliance straight

out when moving it. Do not wiggle or “walk” the appliance when trying

to move it, because floor damage can occur.

5. Clean Before Using:

After you remove all of the packaging materials, clean the inside of

your appliance before using it. See cleaning instructions in Appliance

Care.

6. Some upright models have leveling legs. Level as necessary for best

operation.

7. If your appliance has casters, after moving into place, lock the brakes

on those casters supplied with brakes. Always unlock before moving

the appliance for cleaning.

Key Eject Lock (some models)

To lock or unlock the appliance, you must hold the key in the lock while

turning. The lock is spring loaded, so the key cannot be left in the lock.

If the key is lost, contact your dealer or SUMMIT APPLIANCE for a

replacement. Always give the model and serial number of your appliance

when requesting a replacement key. Keys for most models can be

ordered online at www.summitappliance.com/support

Page 3

Felix Storch, Inc.

LOCATION REQUIREMENTS

Keep flammable materials and vapors, such as gasoline,

away from appliances. Failure to do so can result in fire,

explosion or death.

IMPORTANT: Do not install the appliance near an oven, radiator, or

other heat source, nor in a location where the temperature will fall below

40°F (5°C). Do not place in direct sunlight.

Check the strength of the floor before installing your appliance. It should

hold the weight of a fully loaded appliance. Allow at least 1” (2.5 cm) of

airspace at the top and on both sides of the appliance and 1” (2.5 cm)

between the back of the appliance and the wall. If the appliance is going

to be placed against a wall, leave extra space on the hinge side so the

door can open wider than its width.

Note: This appliance may be installed side by side with another

appliance or appliances. Allow for a 3” (7.5 cm) clearance at the top

and sides and a ¼” (0.64 cm) clearance between the appliances. IF

YOUR MODEL HAS THE LETTERS “BI” IN THE SUFFIX, IT IS

DESIGNED FOR BUILT-IN USE, AND DOES NOT REQUIRE

CLEARANCE EXCEPT IN THE BACK.

Electrical Shock Hazard !

 Plug into a grounded 3-prong outlet.

 Do not remove ground prong.

 Do not use an adapter.

 Do not use an extension cord.

Failure to follow these instructions can result in fire, electrical

shock or death.

Recommended grounding method

A 115 Volt (AC only) 60 Hz grounded electrical supply with a 15- or 20-

amp fuse or circuit breaker is required. It is recommended that a separate

circuit serving only your appliance be provided. Use outlets that cannot

be turned off by a switch or pull chain. Do not use an extension cord.

Felix Storch, Inc.

Page 4

1. Locate the two front leveling legs that may be taped among the packing

materials. In many models these legs are already mounted into the

underside of the appliance.

2. Screw these legs into the front holes on the bottom of the appliance. The

back of the appliance rests on two fixed supports. (Built-in models also

have rear level legs that can provide more precise leveling).

3. Adjust the front legs just enough to lift the cabinet up off the floor.

Note: If your model is equipped with front rollers, the front legs should be

lowered enough to lift the rollers off of the floor to ensure the appliance

does not roll forward when the door is opened.

4. Place a leveling tool on top of the appliance, first side to side, then front to

back. Turn leg counterclockwise to raise a corner. Turn leg clockwise to

lower a corner.

5. Repeat Step 4 until appliance is level.

6. After appliance is fully loaded, recheck with level as in Step 4.

7. If your appliance is equipped with casters, the two front casters have

brakes to prevent rolling. Keep brakes locked, and unlock for moving only.

Level your appliance (some upright models)

APPLIANCE USE

In order to ensure proper temperature, you need to permit proper airflow in

the appliance. Do not block off any air vents. If the vents are blocked, airflow

will be prevented, and temperature and moisture problems may occur. Always

position contents to allow some airflow between shelves or baskets.

Allow the appliance to cool at least 6 to 8 hours before adding contents. Allow

24 hours for temperature to stabilize.

Note: When the appliance is first started, the compressor will run constantly

until the appliance is cooled. It may take 6 to 8 hours (or longer),

depending on room temperature and the number of times the appliance

door is opened. After the appliance is cooled, the compressor will turn on

and off as needed to keep the appliance at the proper temperature.

For optimum temperature performance, it is recommended that this unit

be at least 30% full during use. If you are only using this unit to store

small loads, we recommend adding some water bottles or freezer packs

to ensure temperature stability.

The outside of your appliance may feel warm. This is normal. The appliance’s

design and main function is to remove heat from packages and air space

inside the appliance. The heat is transferred to the room air, making the

outside of the appliance feel warm. (In some models the condenser that gets

warm is just inside the side walls, making these walls warm to the touch.)

ENERGY-SAVING TIPS

 The more airflow provided around an appliance, the less energy it will use.

 If your appliance requires manual defrosting, keep ice build-up to less than 1/2".

 Keep doors open a minimum of time, and shut securely.

Felix Storch, Inc.

Page 5

REVERSING THE DOOR SWING (some models)

If you find the direction of opening the door on your appliance inconvenient, you

can change it. Holes on the opposite side have already been prepared in the

factory.

For two-door units:

 Take off the upper hinge cover from the top door and

remove the screws that hold the top hinge.

 Lift the hinge straight up to free the hinge pin from the

socket in the top of the door.

 Lift the top door to free its bottom socket from the hinge

pin on the central hinge bracket.

 Remove the screws to the central hinge to free its pin

from the top of the lower door.

 Lift the door up and away from the bottom hinge

pin.

 Remove the screws to the bottom hinge.

 Remove the decorative caps from the opposite

side and install the bottom hinge. Plug the holes

from the original side with the decorative caps.

 Replace door onto the pin on the bottom hinge,

then install the central hinge into lower door.

 Insert screws into the central hinge and plug the

holes on the reverse side.

 Replace the upper door onto the central hinge pin.

 Insert screws into the top hinge and tighten.

For one-door units:

 Take off the upper hinge cover from the door and

remove the screws that hold the top hinge.

 Lift the hinge straight up to free the hinge pin from

the socket in the top of the door.

 Lift the door up and away to free its bottom

socket from the hinge pin.

 Remove the screws to the bottom hinge.

 Remove the decorative caps from the opposite side and plug the holes from the

original side with the decorative caps.

 Move the bottom hinge to the opposite side and

tighten the screws. Install any lock washers or nuts

if they were used in the original installation.

 Replace door onto the hinge pin on the bottom

hinge. Place top hinge pin into door. Insert screws

into the top hinge and tighten.

Felix Storch, Inc.

Page 6

APPLIANCE CARE

Cleaning a frost-free appliance

(including models beginning with SCFF, SCFR, SCUF, SCUR)

Use nonflammable cleaners.

Frost-free means that you do not have to defrost your appliance. Frost is

removed by air moving and collecting any moisture and depositing it on the

cooling coil. The cooling coil periodically warms up enough to melt the frost,

and the water then flows down to the drain pan (located behind the base grill)

where it is evaporated.

Complete cleaning should be done at least once a year.

1. Unplug appliance or disconnect power.

2. Remove all contents.

3. Wash the inside walls with a solution of mild detergent in warm water or

2 tbs (26 g) baking soda to 1 qt (0.95 L) warm water.

 Do not use abrasive or harsh cleaners such as window sprays,

scouring cleansers, flammable fluids, cleaning waxes, concentrated

detergents, bleaches or cleansers containing petroleum products on

plastic parts, interior and door liners or gaskets. Do not use paper

towels, scouring pads, or other harsh cleaning tools. These can

scratch or damage surfaces.

4. Rinse well and wipe dry with a clean soft cloth.

5. Use the appropriate cleaning method for the exterior finish.

Painted metal: Wash exteriors with a clean sponge or soft cloth and a

mild detergent in warm water. Do not use abrasive or harsh cleaners,

or cleaners designed for stainless steel. Dry thoroughly with a soft

cloth. For additional protection against damage to painted metal

exteriors, apply appliance wax (or auto paste wax) with a clean, soft

cloth. Do not wax plastic parts.

6. Plug in appliance or reconnect power.

7. Replace all containers.

Cleaning a cycle defrost or manual defrost appliance

Cycle defrost models utilize a system where ice builds up on the rear wall and

melts when the compressor is off. Manual defrost models continually build ice

on inner walls.

NEVER USE A METAL OBJECT TO REMOVE ICE FROM THE REAR WALL.

IF NEEDED, USE A PLASTIC ICE-SCRAPER OR A HAIR DRYER.

Clean surfaces using the same instructions as for frost-free models.

For CSS Models (completely stainless steel), only use cleaners

especially made for stainless steel.

Felix Storch, Inc.

Page 7

Base Grill (some models only)

To Remove and Replace the Base Grill:

1. Open the appliance door and remove the base grill by pulling down

and out from the top.

2. Replace the base grill by putting the clips in the openings in the

appliance panel. Push in until the base grill snaps into place.

Changing the Light Bulb (some models only)

NOTE: Not all appliance bulbs will fit your appliance. Be sure to replace

the bulb with one of the same size, shape, base size and wattage.

You can purchase bulbs from www.summitappliance.com/support

1. Unplug appliance or disconnect power.

2. Remove the light shield. Most models do not require tools.

3. Replace the light bulb with an appliance bulb of the same wattage.

4. Replace the light shield.

5. Plug in appliance or reconnect power.

Loss of Power

After the power is restored, unplug the appliance for 30 minutes to allow

the refrigeration system to equalize. During this time, keep the door

closed as much as possible.

Remember: A full appliance stays cold longer than a partially filled one.

Moving Care

1. Remove all containers.

2. Unplug the appliance.

3. Clean it thoroughly.

4. Tape the appliance shut and tape the electrical cord to the cabinet.

When you get to the new location, refer to the Installation Instructions and

Temperature Selection sections for information on installation and setting

the controls.

APPLIANCE CARE (cont’d)

Felix Storch, Inc.

Page 8

YOUR APPLIANCE MAY HAVE A MECHANICAL (DIAL) OR

DIGITAL THERMOSTAT. DIAL INSTRUCTIONS ARE BELOW.

DIGITAL INSTRUCTIONS ARE ON PAGE 10.

HOW TO ADJUST THE THERMOSTAT

Your appliance may be controlled with a thermostat knob located

inside the unit, towards the right-hand corner. Turn the knob

clockwise from the STOP (0) position toward the higher numbers

for colder temperatures.

Temperature Controls

 Higher settings on the knob (higher numbers) mean lower

temperatures (colder) in all compartments of the appliance. The

temperature inside a refrigerator may even drop below 32°F. Use

higher thermostat settings only when required or recommended.

When the ambient temperature is normal, we recommend a medium

setting.

 Changes of the ambient temperature affect temperature in the interior

of the appliance, so keep this in mind when choosing the setting of the

thermostat knob.

 In STOP (0) position, the appliance does not operate (the cooling

system is switched off), yet the power supply is not interrupted (the

light is on when you open the refrigerator door).

 The temperatures in the refrigerator and in the freezer compartment

also depend on how often you open the door.

In all small refrigerators and freezers without interior fans, tempera-

tures are coldest near the bottom, and occasionally near the rear.

Place contents accordingly.

For optimum temperature performance, it is recommended that this

unit be at least 30% full during use. If you are only using this unit to

store small loads, we recommend adding some water bottles or

freezer packs to ensure temperature stability.

TEMPERATURE SELECTION

Felix Storch, Inc.

Page 9

Every unit is equipped with a Traceable Thermometer/

Alarm that simultaneously displays minimum, maximum

and current interior temperatures and provides a visual

and audible signal when the temperature inside the unit

falls outside the set temperature range.

The temperature sensor, or probe, is enclosed in a

glycol-filled bottle that you insert into the location to be

monitored, such as inside a refrigerator or freezer, once the unit has been

programmed. The thermometer/alarm itself can be attached to the door of

the unit with the magnet on the back, or it can be placed on a convenient

table or shelf.

Power to the Traceable Thermometer/Alarm is supplied with a lithium iron

disulfide battery with a 10-year shelf life. When it is inserted correctly, the

unit will beep and all segments of the LCD display will be temporarily

activated. (Note that alarm temperatures will have to be reset after replacing

the battery.)

The temperature display can be switched between Celsius (°C) and

Fahrenheit (°F) by sliding the °C/°F button located on the back of the unit.

If you find that it is necessary to change the temperature setting for your

digital-thermostat controlled appliance,

please refer to the following instructions.

The front panel of the thermostat is

illustrated here:

To see the SET POINT:

Push and immediately release the set key. The LED will flash and show the

set point value. Wait 15 seconds and the inside temperature will display

again. Typically, refrigerator models are set at 4°C and freezers at -18°C.

To change the SET POINT:

Push set and within 15 seconds, press ▲ or ▼ until the desired set point is

shown. The new setting will be memorized after 15 seconds provided no other

keys are pushed, or you can press the set key immediately.

Notes: 1. The minimum and maximum limits of the temperature range of your

thermostat are preset and locked by us. For refrigerator models, that

range is 33°F to 40°F. For most freezers, the range is -25°C to -1°C. To

reset these ranges, either call us or find information on our website

under Troubleshooting.

2. If the appliance is unplugged, has lost power or is turned off, you must

wait 3 to 5 minutes before restarting the unit. If you attempt to restart

before this time delay, the appliance will not start.

DIGITAL THERMOSTAT INSTRUCTIONS

TRACEABLE THERMOMETER / ALARM

Felix Storch, Inc.

Page 10

°C

°F

set

▼

▲

Function of Controls:

MODE/RESET Key: Press ONCE to reset Max/Min temperature record. When

the unit is sounding an alarm, press ONCE to turn off the beeping sound.

HIGH/LOW Key: Press ONCE to display high alarm setting. Press TWICE to

display low alarm setting. Press THREE TIMES to display current

temperature reading.

ALERT ON/OFF Key: When the unit is sounding an alarm, press ONCE to

turn off. However, the High-Alarm or Low-Alarm will still flash until the

temperature goes back to normal or the Alarm function is turned off.

Programming the Alarms:

The thermometer displays the internal temperature of the unit being

monitored, as well as the maximum and minimum temperatures reached. The

maximum and minimum readings reflect the highest and lowest temperatures

since the battery was inserted or since the MODE/RESET key was last

pressed. If the temperature rises above or falls below the set temperature

range, the alarm will sound. By default, the high alarm temperature setting is

8°C (46.4°F) and the low alarm temperature setting is 2°C (35.6°F). To reset

these limits, follow these instructions:

High Alarm Temperature Setting: Press the HIGH/LOW key ONCE, then press

MODE/RESET to enter the High Alarm temperature setting mode. Use the

Up and Down arrows to adjust the temperature accordingly. Press

MODE/RESET once again to confirm the setting.

Low Alarm Temperature Setting: Press the HIGH/LOW key TWICE, then

press MODE/RESET to enter the Low Alarm temperature setting mode.

Use the Up and Down arrows to adjust the temperature accordingly. Press

MODE/RESET ONCE to confirm the setting.

By default, the low and high alarms should be audible. To turn alarms on/off:

Audible High Alarm Setting: To make sure the high alarm is audible, press

HIGH/LOW key ONCE (to activate HI-SET on the screen). Then press the

ALERT ON/OFF key ONCE to activate the HIGH-ALARM beeping sound.

Press again to deactivate.

Audible Low Alarm Setting: To make sure that the low temperature alarm is

audible, press the HIGH/LOW key TWICE to activate LOW-SET on the

screen. Then press the ALERT ON/OFF key ONCE to activate the LOW-

ALARM beeping sound. Press again to deactivate.

NOTE: For an activated high alarm and low

alarm buzzer, the display should indicate

HI-ALARM and LO-ALARM as shown here.

More details about the features and usage of the Traceable Thermometer/

Alarm can be found in the User Manual accompanying the unit.

TRACEABLE THERMOMETER / ALARM (cont’d)

Felix Storch, Inc.

Page 11

Factory-set default password:

The factory-set default password is 0123. If the

default password is lost, press the key (located inside

the battery box) for 30 seconds, then wait for the warning

sound which signifies the factory-set default password has

been restored.

To set the password: While door is open, press the

key (located inside the battery box) until it jingles,

enter the 0123 password, then # within 10 seconds to

confirm. Enter the password (1-16 digits), then press # again to confirm. A

total of 10 passwords can be set.

Note:

Each password starts with a number from 0 to 9 in order. The first password

starting

with 0 is the default password. For example, use 1xxx, then 2xxx

etc. for 10 users.

Changing password: While the door is open, press the key (located

inside the battery box) until it jingles, enter the old password and press #

within 10 seconds to confirm. Enter the new password, then press # to

confirm.

Note: The first digit cannot be changed.

To open the door: While the door is closed, press the key, enter the

password, then press again to confirm.

To lock door manually: Press #.

Function setting of automatic lock: Setting of the auto-lock time: Press the

key (inside the battery box), enter a number (any number between 10-

99), then press # to confirm. The auto-lock time can be set between 10-99

seconds after opening the door. If the time is set less than 10 seconds, the

door will not lock automatically, only manually.

Deleting the door-opening passwords: Press the key, enter default

password followed by 0000, then press # and all the door-opening passwords

will be deleted except for the default password.

Note: To access the battery box you need to remove only the two small

screws on the top and bottom of that cover. Do not remove the 4 screws

holding the keypad and cover to the appliance door.

KEYPAD LOCK (Optional on most models)

Felix Storch, Inc.

Page 12

NOTE: Models with BI in the model number are designed for built-in operation and need only

minimal clearance on the sides and above the units. All other models require 4 inches of

airflow on the sides and above the units. All models operate best when 2 inches is

provided between the rear wall and the back of the unit.

FCL44, SCF401SS Series

These are manual defrost all-freezers. No internal fans are present, and ice will build up along

the cooling coils. Periodically defrost the ice (recommended when the ice level reaches a

thickness of 1/4 to 1/2 inch). NEVER USE A METAL INSTRUMENT as you can damage the

cooling coils, which will void your warranty and often cannot be repaired. To defrost,

disconnect from the power supply, empty the contents, provide a tray in the bottom to collect

water, and use a hairdryer or other source of warm air to melt the ice (or leave the door open

and the power off for 24 to 48 hours).

For built-in (BI) models and clearance information, see Note above.

SCFF Series / SCFR Series

These models are chest freezers or chest refrigerators, all completely frost-free with forced air

cooling. No defrosting is normally needed. For best operation, allow free airflow within the

interior (do not overfill). The thermostat is located on the bottom rear on the right side of the

unit. Large sizes may have lid-activated lights. The lights will generate some heat, so be

careful to close lids securely to deactivate.

SCUF18, SCUF20, SCUR18, SCUR20

The thermostat for these models is located on the exterior top of the units, and is always digital

(see Page 10 for instructions). All units are fully frost-free and normally never require

defrosting. If supplied with casters (standard), operate with at least two in the locked position,

and never move units with contents inside. If supplied with 6-inch legs (optional), the hex nut

on the bottom of the legs can be rotated to level the unit.

VT, VLT Low-Temperature Freezer Models

These models are all manual defrost, upright or chest type freezers. Keep door closed for best

operation, and follow defrosting instructions for FCL44, SCF401SS Series models above. The

thermostats for these models are always digital, so follow directions on Page 10. VERY LOW

TEMPERATURE FREEZERS CAN DAMAGE UNPROTECTED SKIN, SO ALWAYS WEAR

GLOVES WHEN OPENING FREEZERS, AND NEVER DISCARD THE WARNING LABELS

ON THE FRONT OF THE FREEZER! These freezers will operate best when adequate airflow

is provided on the top, sides and rear of the unit. The compressor on some models is fan-

cooled, so be sure not to block the air vents on the compressor housing. The refrigerant in low

temperature freezers is different from that used in household appliances, so never have

unqualified technicians attempt to repair these units. These units will operate best under some

load, so try to avoid operating empty or nearly empty. If needed, fill with ice-packs to at least

25% of the volume of the freezer.

CP171MED

This model has a separate refrigerator (top) section with automatic defrost, and a freezer

(lower) section with manual defrost, each with its own compressor and thermostat for totally

independent control. The thermostats are both located on the top, on the exterior of the unit,

and are more easily accessed with the refrigerator door opened. This unit has no internal fans.

Defrost as needed (see FCL44, SCF401SS Series above). For clearance information, see

Note at the top of this page.

OPERATION OF SPECIFIC MODELS

Felix Storch, Inc.

Page 13

ABOUT THE FIXED SHELF

If you notice a problem with your appliance, try these solutions first to

avoid the cost of an unnecessary service call.

The appliance will not operate:

 Has a fuse blown or circuit breaker tripped?

Replace the fuse or reset the circuit breaker.

 Is the appliance defrosting (on some models)?

Recheck to see whether the unit is operating in 30 minutes. Frost-free models will

regularly run a defrost cycle.

There is water in the defrost drain pan (on some models):

 Is the appliance defrosting?

The water will evaporate. It is normal for water to drip into the defrost pan.

 Is it more humid than normal?

When it is humid, expect that the water in the defrost pan will take longer to evaporate.

The motor seems to run too much:

 Is there excessive frost or a package preventing the door from closing?

Defrost and clean the appliance, or move the package so the door closes properly.

 Is the room temperature warmer than normal?

The motor will run longer under warm conditions. At normal room temperatures, the motor

will run about 40% to 80% of the time. Under warmer conditions, it will run even more.

 Has a large amount of contents just been added to the appliance?

Adding a large number of items warms the appliance. The motor normally will run longer to

cool the unit back down.

 Is the door closed completely?

Push the door firmly shut. If it will not shut all the way, see The door will not close com-

pletely later in this section.

 Are the condenser coils dirty (on some models)?

This prevents heat transfer and makes the motor work harder. Clean the condenser

coils.

 Is the door gasket sealed all the way around?

If not, contact a qualified technician.

Felix Storch, Inc.

Page 14

TROUBLESHOOTING

In some units, the center shelf is fixed in place and cannot be removed.

This is because the glycol-filled bottle that contains the temperature

sensors for your alarm and thermometer is best stored in this location.

The center of your refrigerator or freezer will provide the most accurate

temperature readings. For proper temperature monitoring, keep the

bottles in place and do not remove this shelf.

Temperature is too warm:

 Are the air vents blocked?

This prevents cold air movement. Move objects away from the air vents.

 Is the door opened often?

Be aware that the appliance will warm up when this occurs. In order to keep the unit

cool, try to get everything you need out at one time. Keep contents organized so they

are easy to find and close the door as soon as the items are removed.

 Has a large amount of contents just been added to the freezer?

Adding a large number of items warms the unit. It can take several hours for it to

return to normal temperature.

The door will not close completely or is difficult to open:

 Are any packages blocking the door?

Rearrange containers so that they fit more tightly and take up less space.

 Are the shelves or drawers out of position (on some models)?

Put the shelves and drawers back into their correct positions.

Note: If the problem is not due to any of the above, remember that the compressor on

your new appliance will operate longer than your old one due to its high-efficiency

motor.

TROUBLESHOOTING (cont’d)

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check Troubleshooting. It

may save you the cost of a service call. If you still need help, follow the

instructions below.

When calling, please know the purchase date and the complete model

and serial numbers of your appliance. This information will help us to

respond better to your request.

Replacement Parts

If you need to order replacement parts, we recommend that you only use

factory-specified parts. Factory-specified parts will fit right and work right

because they are made with the same precision used to build every new

SUMMIT® appliance.

Call customer service toll free in the USA:

1-800-287-8799 Monday to Friday 9:00 a.m. – 5:00 p.m. (ET)

Order parts online at www.summitappliance.com/support

Felix Storch, Inc.

Page 15

ONE YEAR LIMITED WARRANTY FOR APPLIANCE

Within the 48 contiguous United States, for one year from the date of purchase, when this

appliance is operated and maintained according to instructions attached to or furnished with

the product, warrantor will pay for factory-specified parts and repair labor to correct defects in

materials or workmanship. Service must be provided by a designated service company.

Outside the 48 states, all parts are warranted for one year from manufacturing defects. Plastic

parts, shelves and cabinets are warranted to be manufactured to commercially acceptable

standards, and are not covered from damage during handling or breakage.

5-YEAR COMPRESSOR WARRANTY

1. The compressor is covered for 5 years.

2. Replacement does not include labor.

ITEMS WARRANTOR WILL NOT PAY FOR:

1. Service calls to correct the installation of your appliance, to instruct you how to use your appliance, to

replace or repair fuses or to correct wiring or plumbing.

2. Service calls to repair or replace appliance light bulbs or broken glass shelves. Consumable parts (such

as filters) are excluded from warranty coverage.

3. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation,

installation not in accordance with electrical or plumbing codes, or use of products not approved by

warrantor.

4. Replacement parts or repair labor costs for units operated outside the United States.

5. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

6. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not

installed in accordance with published installation instructions.

DISCLAIMER OF IMPLIED WARRANTIES – LIMITATION OF REMEDIES

CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY

SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. IMPLIED WARRANTIES,

INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE, ARE LIMITED TO ONE YEAR. WARRANTOR SHALL NOT BE LIABLE FOR

INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE

EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR

LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABILITY OR

FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS

WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER

RIGHTS, WHICH VARY FROM STATE TO STATE.

WARRANTY

FELIX STORCH, INC.

770 Garrison Avenue

Bronx, New York 10474

Phone: (718) 893-3900

Fax: (844) 478-8799

www.summitappliance.com

For parts and accessory ordering,

troubleshooting and helpful hints,

visit:www.summitappliance.com/support

WARNING! This product may contain chemicals known to the state of California to

cause cancer or birth defects or other reproductive harm. For more information,

visit: www.summitappliance.com/prop65

Chemicals known by the manufacturer to be present in this product in

concentrations higher than threshold limits: NONE.

March 2017

SÉCURITÉ de l'APPAREIL

Votre sécurité et celle des autres est très importante pour nous.

Nous donnons de nombreux messages de sécurité importants dans ce

manuel et sur votre appareil. Toujours lire et respecter les consignes de

sécurité.

Vous pouvez être gravement blessé ou même tué si vous ne suivez pas

les instructions.

Les messages de sécurité vous diront quel est le danger potentiel,

comment réduire le risque de blessure et ce qui peut arriver si les

instructions ne sont pas suivies.

 Brancher sur une prise à 3 broches mise à la terre.

 Ne pas enlever la broche de terre, ni utiliser un adaptateur 3/2.

 Ne pas utiliser une rallonge.

 Veiller à ne pas brancher dans les prises contrôlées par des

interrupteurs muraux.

 Coupez l'alimentation avant l'entretien.

 Après l'entretien, remplacer toutes les pièces et panneaux avant de

faire fonctionner.

 Utiliser des nettoyants ininflammables.

 Garder les matériaux et les vapeurs inflammables, tels que l'essence,

loin des appareils.

 Utilisez deux personnes ou plus pour déplacer et installer l'appareil.

Les réfrigérateurs avec des tiroirs sont munis de supports anti-

basculement. Toujours installer avant de les utiliser.

Mise au rebut correcte de votre ancien appareil

Les anciens appareils peuvent représenter un danger d'étouffement

pour les enfants.

Enlever les portes de votre ancien appareil.

Laissez les étagères en place.

Si un ancien appareil contient des fluides frigorigènes, il doit être recyclé

par une entreprise de service ou de la cession sous licence.

CONSIGNES DE SÉCURITÉ IMPORTANTES

AVERTISSEMENT: Pour réduire le risque d'incendie, de choc

électrique ou de blessure lors de l'utilisation de votre appareil,

suivez ces précautions de base:

Felix Storch, Inc.

Page 17

INSTRUCTIONS d’INSTALLATION

Risque du poids excessif!

Utilisez deux ou plus personnes pour déplacer et installer

votre appareil. Défaut de le faire peut conduire aux blessures

de dos ou d'autres.

ATTENTION : Vous DEVEZ laisser l'appareil en position verticale pendant 24

heures avant de mettre-le en marche pour permettre au lubrifiant du

compresseur à drainer. Panne de le faire peut nuire le fonctionnement et

la longévité de l'unité.

1. Retirez les matériaux d'emballage.

2. Retirer le ruban adhésif et la colle des surfaces avant d'allumer

l'appareil. Frottez une petite quantité de savon à vaisselle liquide sur

l'adhésif avec vos doigts. Rincer à l'eau tiède et sécher.

3. Ne pas utiliser d'instruments tranchants, alcool à friction, de liquides

inflammables ou de nettoyants abrasifs pour enlever le ruban ou de la

colle. Ces produits peuvent endommager la surface de votre appareil.

4. Lorsque vous déplacez votre appareil :

Votre appareil est lourd. Lors du déplacement de l'appareil pour le

nettoyage ou le service, veiller à protéger le plancher. Toujours tirer

l'appareil tout droit lors du déplacement. Ne pas tortiller ou "marcher"

de l'appareil lorsque vous essayez de le déplacer, parce que les

dommages au sol peut se produire.

5. Nettoyer avant utilisation:

Après avoir enlevé tous les matériaux d'emballage, nettoyer l'intérieur

de votre appareil avant de l'utiliser. Voir les instructions de nettoyage

dans l’article Soins de votre appareil.

6. Certains modèles verticaux ont pieds de nivellement. Niveler comme

nécessaire au fonctionnement optimal.

7. Si votre appareil est équipé de roulettes, après avoir déménagé en

position, verrouiller les freins sur les roulettes fournies avec des

freins. Toujours déverrouiller avant de déplacer l'appareil pour le

nettoyage.

Verrouillage avec éjection de la clé (certains modèles)

Pour verrouiller ou déverrouiller l'appareil, vous devez détenir la clé dans

la serrure en tournant. La serrure est à ressort, de sorte que la clé ne

peut être laissée dans la serrure.

Si la clé est perdue, contactez votre revendeur ou SUMMIT APPLIANCE

pour un remplacement. Toujours donner le modèle et le numéro de série

de votre appareil lorsque vous demandez une clé de remplacement. Les

clés pour la plupart des modèles peuvent être commandées en ligne à

www.summitappliance.com/support

Felix Storch, Inc.

Page 18

EXIGENCES de POSITIONNEMENT

Garder les matériaux et les vapeurs inflammables, tels que

l'essence, loin des appareils. Défaut de le faire peut

entraîner un incendie, une explosion ou la mort.

IMPORTANT: Ne pas installer l'appareil près d'un four, radiateur ou autre

source de chaleur, ni dans un endroit où la température sera

inférieure à 40 ° F (5 ° C). Ne placez pas en plein soleil.

Vérifiez la force du plancher avant d'installer votre appareil. Il doit

supporter le poids d'un appareil entièrement chargé. Prévoyez au moins

1 "(2,5 cm) de l'espace aérien au-dessus et sur les deux côtés de

l'appareil et de 1" (2,5 cm) entre l'arrière de l'appareil et le mur. Si

l'appareil va être placé contre un mur, laissez un espace supplémentaire

sur le côté de la charnière de sorte que la porte peut ouvrir plus large que

sa largeur.

Remarque: Cet appareil peut être installé aux côtés des autres

appareils. Prévoir un dégagement de 3 "(7,5 cm) au sommet et sur

les côtés et ¼" (0,64 cm) entre les appareils. SI VOTRE MODÈLE A

LES LETTRES « BI » PAR LE SUFFIXE, IL EST CONCU POUR

L’USAGE ENCASTRÉ ET N’EXIGER DE L’ESPACE DE

DÉGAGEMENT SAUF A L'ARRIERE.

Risque de choc électrique !

 Brancher sur une prise à 3 broches mise à la terre.

 Ne pas enlever la broche à terre.

 Ne pas utiliser un adaptateur.

 Ne pas utiliser une rallonge.

Défaut de suivre ces instructions peut entraîner un incendie, un

choc électrique ou la mort.

Méthode de mise à la terre recommandée

Une alimentation électrique de 115 volts (CA seulement) 60 Hz mise à

terre avec un fusible ou disjoncteur de 15 ou 20 ampères est nécessaire.

Il est recommandé qu'un circuit distinct pour alimenter uniquement votre

appareil soit fourni. Utilisez prises de courant qui ne peuvent pas être

désactivées par un commutateur ou une chaîne de traction. Ne pas

utiliser une rallonge.

Felix Storch, Inc.

Page 19

NIVELER votre APPAREIL (certains modèles verticaux)

1. Repérez les deux pieds de nivellement avant qui peuvent être trouvés

parmi les matériaux d'emballage. Dans de nombreux modèles ces jambes

sont déjà montées dans la face inférieure de l'appareil.

2. Visser ces pieds dans les trous avant sur le fond de l'appareil. L'arrière de

l'appareil repose sur deux supports fixes. (Les modèles encastrés ont

aussi des pieds de niveau à l'arrière qui peuvent fournir le nivellement

plus précis).

3. Réglez les pieds avant, juste assez pour soulever l'armoire du plancher.

Note: Si votre modèle est équipé de roulettes avant, les pieds avant

devraient être abaissés assez pour soulever les rouleaux du plancher

pour assurer que l'appareil ne roule pas vers l'avant lorsque la porte

est ouverte.

4. Placez un outil de nivellement sur le dessus de l'appareil, le premier côté

à l'autre, puis avant à l'arrière. Tourner le pied vers la gauche pour

soulever un coin. Tournez vers la droite pour abaisser un coin.

5. Répétez l'étape 4 jusqu'à ce que l'appareil est de niveau.

6. Après l'appareil est complètement chargé, vérifiez avec le niveau comme

à l'étape 4.

7. Si votre appareil est équipé de roulettes, les deux roulettes avant sont

équipées de freins pour éviter de roulement. Garder les freins bloqués, et

déverrouiller pour déplacer seulement.

UTILISATION de l'APPAREIL

Afin d'assurer la bonne température, vous avez besoin pour permettre une

ventilation adéquate dans l'appareil. Ne pas bloquer les orifices d'aération. Si

les évents sont bloqués, le flux d'air sera empêché, et les problèmes de

température et d'humidité peut se produire. Toujours positionner le contenu

de manière à permettre l'air de circuler entre les étagères ou des

paniersAllow the appliance to cool at least 6 to 8 hours before adding

contents. Allow 24 hours for temperature to stabilize.

Note: Lorsque l'appareil est mis sous tension pour la permière fois, le

compresseur fonctionne constamment, jusqu'à ce que l'appareil est

refroidi. Il peut falloir de 6 à 8 heures (ou plus), en fonction de la

température ambiante et du nombre de fois que la porte de l'appareil est

ouverte. Après l'appareil est refroidi, le compresseur se met en marche et

s'arrête comme requis, pour maintenir l'appareil à la bonne température.

Pour une performance optimale de la température, il est recommandé

que cette unité soit au moins 30% de la pleine pendant l'utilisation. Si

vous utilisez cet appareil uniquement pour stocker de petites charges,

nous recommandons d'ajouter quelques bouteilles d'eau ou des sacs

réfrigérants pour assurer la stabilité de la température.

L'extérieur de votre appareil peut être chaude. C'est normal. La conception et

la fonction principale de l'appareil est d'évacuer la chaleur du colis et l'espace

aérien à l'intérieur de l'appareil. La chaleur est transférée à l'air de la pièce,

ce qui rend l'extérieur de l'appareil se sentir au chaud. (Dans certains

modèles, le condensateur qui devient chaud est juste à l'intérieur des parois

latérales, faisant de ces murs chaud au toucher.)

Felix Storch, Inc.

Page 20

La page charge ...

EQTemp VT125 Le manuel du propriétaire

Marque: EQTemp

Modèle: VT125

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: EQTemp VT125 Owner's manual

Documents connexes

EQTemp EQFR71 Manuel utilisateur

EQTemp VT125 Le manuel du propriétaire

EQTemp VT125 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents