Samsung PN43D440 Manuel utilisateur

BN68-03325B-00

Plasma TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model _____________ Serial No. _____________

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG

customer care center.

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs

Samsung.

Country

Customer Care Center

Web Site

Address

CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca Samsung Electronics Canada Inc., Customer

Service 55 Standish Court Mississauga, Ontario

L5R 4B2 Canada

U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com/us Samsung Electronics America, Inc.

85 Challenger Road

Ridgeeld Park, NJ 07660-2112

[PD450-ZC]BN68-03325B-00L02.indb 1 2011-01-13 오전 10:35:34

2

English

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

Product design and speciﬁcations may be changed without notice.

Important Warranty Information Regarding Television Format Viewing

✎

See the warranty card for more information on warranty terms.

Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video.

The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to ﬁll the screen if your model offers this feature and

the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark side bars on non-expanded standard format

television video and programming, should be limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics

and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven

aging of PDP Displays that leave subtle, but permanent burned-in ghost images in the PDP picture. To avoid this, vary the programming and images, and

primarily display full screen moving images, not stationary patterns or dark bars.

On PDP models that offer picture sizing features, use these controls to view different formats as a full screen picture.

Be careful in the selection and duration of television formats you use for viewing. Uneven PDP aging as a result of format selection and use, as well as

burned in images, are not covered by your Samsung limited warranty.

• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG)

products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service

in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the

warranty period originally speciﬁed, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited

Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service

Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those

encountered in normal use of the product.

Excluded, but not limited to, are any originally speciﬁed provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or

replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

– In the United States : 1-800-SAMSUNG (1-800-726-7864)

– In Canada : 1-800-SAMSUNG

User Instructions

• Screen Image retention

Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image

retention. This image retention is also known as ‘screen burn’. To avoid such image retention, refer to page 15 of this manual to reduce the degree of

brightness and contrast of the screen when displaying a still image.

• Heat on the top of the Plasma TV

The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the

product.

This is normal and does not indicate any defect or operation failure of the product.

However, children should be prevented from touching the upper part of the product.

• The product is making a ‘cracking’ noise.

A ‘cracking’ noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or

humidity. This is normal and not a defect of the unit.

• Cell Defects

The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However,

there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

• Avoid operating the TV at temperatures below 41°F (5°C)

• A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center

of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects

to the screen.

Damages caused by the above effect are not covered by the Warranty.

• After-images on the Screen.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images for a long time.

• Warranty

Warranty does not cover any damage caused by image retention.

Burn-in is not covered by the warranty.

[PD450-ZC]BN68-03325B-00L02.indb 2 2011-01-13 오전 10:35:34

3

Contents

ENGLISH

English

Getting Started

y List of Features ......................................................... 4

y Accessories .............................................................. 4

y Install the Stand ........................................................ 5

y Viewing the Control Panel ......................................... 6

y Remote Control Buttons ........................................... 7

y Connecting to an Antenna or Cable Connection ....... 8

y Plug & Play (Initial Setup) ........................................... 8

Connections

y Connecting to an AV Device ...................................... 9

y Connecting to an Audio Device ............................... 10

y Connecting to a PC ................................................ 11

y Changing the Input Source ..................................... 12

Basic Features

y How to Navigate Menus .......................................... 12

y Channel Menu ........................................................ 13

Seeing Channels 13

Using Favorite Channels 13

Memorizing Channels 13

Editing Channels 14

Other Features 14

y Picture Menu .......................................................... 15

Changing the Preset Picture Mode 15

Adjusting Picture Settings 15

Changing the Picture Options 15

y Sound Menu ........................................................... 17

Changing the Preset Sound Mode 17

Adjusting Sound Settings 17

Sound Settings 17

y Setup Menu ............................................................ 18

Setting the Time 18

Using the Sleep Timer 19

Setting the On / Off Timer 19

Locking Programs 19

Economical Solutions 21

Other Features 21

y Support Menu ......................................................... 22

Advanced Features

y Media Play .............................................................. 23

Connecting a USB Device 23

y Anynet+ .................................................................. 26

Setting Up Anynet+ 27

Switching between Anynet+ Devices 28

Recording 28

Listening through a Receiver 28

Troubleshooting for Anynet+ 29

Other Information

y Installing the Wall Mount ......................................... 30

y Securing the Installation Space ............................... 31

y Securing the TV to the Wall ..................................... 32

y Troubleshooting ...................................................... 33

Storage and Maintenance 35

y License ................................................................... 36

y Speciﬁcations ......................................................... 36

y Dimensions ............................................................. 37

y Index ...................................................................... 38

Check the Symbol!

t

This function can be used by pressing the

TOOLS button on the remote control.

Note Step by Step Guide

Indicates additional information. Check here for instructions on how to open

the relevant submenu within the OSD (on

screen display).

[PD450-ZC]BN68-03325B-00L02.indb 3 2011-01-13 오전 10:35:35

4

English

List of Features

y Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed

without a cable box / STB (Set-Top-Box) satellite receiver.

y SRS TruSurround HD provides a virtual surround system (p. 17).

y Media Play: Allows you to play music ﬁles, pictures saved on a USB device (p. 23).

y Self Diagnosis: You can check to make sure picture and sound operate normally (p. 22).

Accessories

✎

Please make sure the following items are included with your PDP TV. If any items are missing, contact your dealer.

✎

The items' colors and shapes may vary depending on the model.

✎

Check that there is no accessory hidden behind packing materials when you open the box.

y Remote Control (AA59-00506A) & Batteries (AAA x 2)

y Owner’s Instructions

y Power Cord

y Cleaning Cloth (BN63-01798B)

y Warranty Card / Safety Guide / Quick Setup Guide

Ferrite Core (2EA)

(3301-002049)

✎

Ferrite Core for Power Cord: The ferrite cores are used to shield the cables from interference.

When connecting the ferrite core to a cable, open the ferrite core and clip it around the cable

near the plug as shown in the figure.

x

A One ferrite core should be no more than 8 inches from the end of the cord that is

inserted into the TV.

x

B If your TV came with a second ferrite core (the 43 inch model), the second core should be

no more than 3/4 inches from the end of the cord that is inserted into the AC outlet.

Power Cord

✎

Ferrite Core : The ferrite cores are used to shield the cables from interference. When

connecting a cable, open the ferrite core and clip it around the cable near the plug as shown

in the figure. (51 inch model only)

Antenna Cable/

Component Cable

(sold separately)

Input Cables (Sold Separately)

HDMI HDMI-DVI Component Composite (AV) Coaxial (RF)

Getting Started

B

A

[PD450-ZC]BN68-03325B-00L02.indb 4 2011-01-13 오전 10:35:36

5

01 Getting Started

English

Install the Stand

See separate guide for installing the stand.

Stand (1EA) Guide Stand (1EA) Screws (8EA)

Follow the steps below to connect the TV to the stand.

1. Connect the Guide Stand to the Stand using four screws (M4 X L12) as shown.

2. With your TV upright, connect the TV to the Stand. 3. Fasten four screws (M4 X L8) at position.

✎

NOTE

x

Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.

x

Make sure that at least two people lift and move the PDP TV.

[

Do not insert your fingers into the stand base slot of the TV when installing the stand base.

x4 (M4 X L12)

x4 (M4 X L8)

Rear

Front

(M4 X L12)

x4

Top View

DO NOT USE

CHEMICALS

DO NOT USE

GREASE

DO NOT USE

OIL

ATTENTION

(M4 X L8)

x4

(Correct assembly)

(Incorret assembly)

[PD450-ZC]BN68-03325B-00L02.indb 5 2011-01-13 오전 10:35:38

6

Getting Started

English

Viewing the Control Panel

✎

The product color and shape may vary depending on the model.

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.

Remote control sensor Aim the remote control towards this spot on the TV.

P

(Power)

Turns the TV on or off.

SOURCE

E

Toggles between all the available input sources. In the on-screen menu, use this

button as you would use the ENTER

E

button on the remote control.

MENU/CONTENT Displays an on-screen menu, the OSD (on screen display) of your TV’s features.

y

Adjusts the volume. In the OSD, use the

y

buttons as you would use the

◄ and ► buttons on the remote control.

z

Changes the channels. In the OSD, use the

z

buttons as you would use the

▼ and ▲ buttons on the remote control.

Standby mode

Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe

and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on a

holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to

unplug the power cord.

Speakers

Power Indicator

Remote control sensor

[PD450-ZC]BN68-03325B-00L02.indb 6 2011-01-13 오전 10:35:38

7

01 Getting Started

English

Remote Control Buttons

Installing batteries (Battery size: AAA)

✎

NOTE

x

Use the remote control within 23 feet from the TV.

x

Bright light may affect the performance of the remote

control. Avoid using when near fluorescent lights or neon

signs.

x

The color and shape may vary depending on the model.

SLEEP

P.SIZE

A B C D

MEDIA.P

Turns the TV on and off.

Returns to the previous channel.

Changes channels.

Displays and selects the available video

sources (p. 12).

Displays information on the TV screen.

Automatically shuts off the TV at a preset

time (p. 19).

Displays the channel list on the screen

(p. 13).

Selects the on-screen menu items and

changes the values seen on the menu.

Exits the menu.

MTS: Press to choose stereo, mono,

or Separate Audio Program (SAP

broadcast) (p. 18).

P.SIZE: Lets you choose the picture

size (p. 16).

CC: Controls the caption decoder (p. 21).

Press to directly access channels.

Press to select additional digital channels

(digital) being broadcasted by the same

station. For example, to select channel

“54-3”, press “54”, then press “–” and

“3”.

Adjusts the volume.

Displays Media Play (USB) (p. 23).

Brings up the OSD.

Quickly select frequently used functions.

Returns to the previous menu.

Buttons used in the Channel list,

Media Play (USB) menu, etc.

Cuts off the sound temporarily.

[PD450-ZC]BN68-03325B-00L02.indb 7 2011-01-13 오전 10:35:38

8

Getting Started

English

Connecting to an Antenna or Cable Connection

When the TV is initially powered on, basic settings proceed automatically.

✎

Connecting the power cord and an antenna or cable connection.

✎

The PDP device may interfere with an amateur radio or AM radio.

Plug & Play (Initial Setup)

When you turn the TV on for the ﬁrst time, a sequence of on-screen prompts will assist in conﬁguring basic settings. To turn on

the TV, Press the POWER

P

button. Plug & Play is available only when the Input source is set to TV.

✎

Plug & Play is available only when the Source is set to TV.

✎

To return to the previous step, in the Plug & Play sequence, press the red button on your remote.

1

Selecting the OSD

Language

Press the ◄ or ► button, and then press the ▲ or ▼ button to

select a language. Press ENTER

E

when done.

P

POWER

2

Selecting Store Demo

or Home Use

Press the ◄ or ► button, then press the ENTER

E

button.

y Select the Home Use mode. Store Demo mode is for retail

environments.

y To return the unit’s settings from Store Demo to Home Use

(standard): Press the volume button on the TV. When you

see the volume OSD, press and hold MENU for 5 sec.

3

Selecting an antenna

Press the ▲ or ▼ button, then press the ENTER

E

button. Select Air, Cable or Auto.

4

Selecting and

memorizing channels

The channel search will start automatically. This can take up to 30 minutes.

For more information, refer to Channel → Auto Program in the e-Manual.

✎

Press the ENTER

E

button at any time to interrupt the memorization process.

5

Setting the

Clock Mode

Set the Clock Mode automatically or manually.

y Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.

y Manual: Allows you to manually set the current date and time (p. 18).

6

View the

HD Connection Guide.

The connection method for the best HD screen quality is displayed.

7

Enjoy your TV.

Press the ENTER

E

button.

If You Want to Reset This Feature...

O

MENU

m

→ Setup → Plug & Play → ENTER

E

✎

NOTE

y To change the TV’s setting from Store Demo to Home Use when not in Plug & Play, press the volume button on the TV.

When you see the volume in the OSD, press and hold MENU for 5 sec.

ANT OUT

VHF/UHF Antenna

or

Cable

Power Input

Antenna Cable (Not Supplied)

[PD450-ZC]BN68-03325B-00L02.indb 8 2011-01-13 오전 10:35:38

9

English

02 Connections

Connections

Connecting to an AV Device

Using an HDMI or HDMI/DVI cable: HD connection (up to 720p/1080i)

We recommend using the HDMI connection for the best quality HD picture.

Available devices: DVD player, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver.

✎

HDMI IN 1(DVI), 2, DVI AUDIO IN

x

When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack for video. A DVD player,

Blu-ray player, HD cable box, or HD STB satellite receiver may require a DVI-HDMI (DVI to HDMI) cable or

DVI-HDMI (DVI to HDMI) adapter. You must use the PC/DVI AUDIO IN jack for audio. The DVI AUDIO IN jack

is required for audio.

x

The picture may not display normally (if at all) or the audio may not work if an external device that uses an

older version of HDMI mode to the TV. If such a problem occurs, ask the manufacturer of the external device

about the HDMI version and, if out of date, request an upgrade.

x

Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may

occur.

Using a Component (up to 720p/1080i) or an Audio/Video (480i only) Cable

Available devices: DVD player, Blu-ray player, cable box, STB satellite receiver, VCR

✎

When connecting to AV IN, the color of the AV IN [Y/VIDEO] jack (green) will not match the video cable (yellow).

✎

For better picture quality, the Component connection is recommended over the A/V connection.

HDMI OUT

DVI OUT

AUDIO OUT

R-AUDIO-L

R W

R

W

Device

Red White

HDMI Cable (Not Supplied)

HDMI to DVI Cable (Not Supplied)

Audio Cable (Not Supplied)

PR PB G

COMPONENT OUT

AUDIO OUT

R-AUDIO-L

R W

Y

R

W

R GB

AUDIO OUT

R-AUDIO-L

VIDEO OUT

R

W

R GB

W R

Y

RW

RBG

Device

Red White

Red Blue Green

Red White Yellow

Audio Cable

(Not Supplied)

Component Cable

(Not Supplied)

Video Cable

(Not Supplied)

[PD450-ZC]BN68-03325B-00L02.indb 9 2011-01-13 오전 10:35:39

10

English

Connections

Connecting to an Audio Device

Using an Optical (Digital) Cable Connection

Available devices: Digital Audio System, Ampliﬁer, DVD home theater

✎

DIGITAL AUDIO OUT (OPTICAL)

x

When you connect a Digital Audio System to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume

of both the TV and the system.

x

5.1 CH (channel) audio is available when you connect the TV to an external device supporting 5.1 CH.

x

When the receiver (amplifier or DVD home theater) is set to on, you can hear sound output from the TV’s

optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the amplifier or DVD

home theater. When the source is a digital component such as a DVD player / Blu-ray player / cable box / STB

(Set-Top-Box) satellite receiver and you connection it to the TV via HDMI, you will only 2 CH audio from the

amplifier or DVD home theater. If you want to hear 5.1 CH audio, connect the digital audio out jack from your

DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theater.

Using an EX-Link Cable Connection

Available Devices: External devices that support EX-Link

EX-LINK: Connector for service only.

OPTICAL

Digital Audio System

Optical Cable (Not Supplied)

[PD450-ZC]BN68-03325B-00L02.indb 10 2011-01-13 오전 10:35:40

11

English

02 Connections

Connecting to a PC

Using an HDMI/DVI Cable

✎

Your PC may not support an HDMI connection.

Display Modes (HDMI/DVI Input)

Optimal resolution

y PN43D440, PN43D450: 1024 X 768 @ 60Hz / PN51D440, PN51D450: 1360 X 768 @ 60Hz

Mode Resolution

Horizontal

Frequency

(KHz)

Vertical

Frequency

(Hz)

Pixel Clock

Frequency

(MHz)

Sync Polarity

(H / V)

PN43D450 PN51D450

IBM

640 x 350

720 x 400

31.469

70.086

70.087

25.175

28.322

+/-

-/+

>

MAC

640 x 480

832 x 624

35.000

49.726

66.667

74.551

30.240

57.284

-/-

>

VESA CVT

720 x 576

1280 x 720

35.910

56.456

59.950

74.777

32.750

95.750

-/+

> >

>

VESA DMT

640 x 480

800 x 600

1024 x 768

1280 x 720

1360 x 768

31.469

37.500

37.861

37.879

46.875

48.077

48.363

56.476

60.023

45.000

47.712

59.940

75.000

72.809

60.317

75.000

72.188

60.004

70.069

75.029

60.000

60.015

25.175

31.500

40.000

49.500

50.000

65.000

75.000

78.750

74.250

85.500

-/-

+/+

-/-

+/+

>

VESA GTF

1280 x 720 52.500 70.000 89.040 -/+

>

✎

NOTE

x

For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.

x

The interlace mode is not supported.

x

The set may operate abnormally if a non-standard video format is selected.

x

Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

AUDIO OUT

DVI OUT

HDMI to DVI Cable (Not Supplied)

Audio Cable (Not Supplied)

[PD450-ZC]BN68-03325B-00L02.indb 11 2011-01-13 오전 10:35:41

12

English

Changing the Input Source

Source List

Use to select TV or an external input sources

such as a DVD player / Blu-ray player / cable

box / STB satellite receiver.

O

MENU

m

→ Input → Source List →

ENTER

E

SOURCE

■ TV / AV / Component1 / Component2 /

HDMI1/DVI / HDMI2

✎

You can only choose external devices that are

connected to the TV. In Source, connected inputs

will be highlighted.

Edit Name

O

MENU

m

→ Input → Edit Name → ENTER

E

In the Source, press the TOOLS button, and then you can

set an external input sources name you want.

■ VCR / DVD / Cable STB / Satellite STB / PVR STB /

AV Receiver / Game / Camcorder / PC / DVI PC /

DVI / TV / IPTV / Blu-ray / HD DVD / DMA: Name the

device connected to the input jacks to make your input

source selection easier.

✎

If you have connected a PC to the HDMI IN 1(DVI) port

with an HDMI cable, select PC under Edit Name to

enter a device name.

✎

if you have connected a PC to the HDMI IN 1(DVI) port

with an HDMI to DVI cable, select DVI PC under Edit

Name to enter a device name.

✎

If you connected an AV device to the HDMI IN 1(DVI)

port with an HDMI to DVI cable, select DVI Devices

mode under Edit Name to enter a device name.

Basic Features

How to Navigate Menus

Before using the TV, follow the steps below to learn how to

navigate the menu and select and adjust different functions.

S

LEE

P

.SIZ

E

A

B

C

D

CO

NTENT

1

2

3

4

1 MENU button: Displays the main on-screen menu.

2 ENTER

E

/ Direction button: Move the cursor and

select an item. Conﬁrm the setting.

3 RETURN button: Returns to the previous menu.

4 EXIT button: Exits the on-screen menu.

How to Operate the OSD (On Screen Display)

The access steps may differ depending on the selected

menu.

1

MENU

m

The main menu options appear on

the screen:

Picture, Sound, Channel, Setup,

Input, Application, Support.

2

▲ / ▼ Select an icon or option with the ▲

or ▼ button.

3

ENTER

E

Press ENTER

E

to access the

sub-menus.

4

▲ / ▼

Select the desired submenu with

the ▲ or ▼ button.

5

◄ / ►

Adjust the value of an item with the

◄ or ► button. The adjustment in

the OSD may differ depending on

the selected menu.

6

ENTER

E

Press ENTER

E

to conﬁrm the

selection.

7

EXIT

e

Press EXIT.

[PD450-ZC]BN68-03325B-00L02.indb 12 2011-01-13 오전 10:35:41

13

English

03 Basic Features

Channel Menu

¦ Seeing Channels

Channel List

The Channel List contains the channels your

TV displays (added channels) when you press

the Channel button on your remote. On the

Channel List, you can view Added Channels,

channel information, and Favorites, and

manage channels.

O

MENU

m

→ Channel → Channel List

→ ENTER

E

Select a channel in the All Channels,

Added Channels, Favorite or Programmed

screen by pressing the ▲ / ▼ and

ENTER

E

buttons. Then you can watch the

selected channel.

CHLIST

■ All Channels: Shows all currently available channels.

■

Added Channels: Shows all added channels.

■

*

Favorite: Shows all favorite channels.

■

Programmed: Shows all currently reserved

programs.

✎

Using the color buttons with the Channel List

x

Green (Zoom): Enlarges or shrinks a channel

number.

x

Yellow (Select): Selects multiple channel lists.

Select desired channels and press the Yellow button

to set all the selected channels at the same time. The

c

mark appears to the left of the selected channels.

x

T

(Tools): Displays the Channel List option menu.

(The options menus may differ depending on the

situation.)

Channel Status Display Icons

Icons Description

c

A channel selected.

*

A channel set as a Favorite.

)

A reserved Program.

¦ Using Favorite Channels

O

MENU

m

→ Channel → Channel List → ENTER

E

Add to Favorite / Delete from Favorite

t

Tag channels you watch frequently as Favorites.

1. Select a channel and press the TOOLS button.

2. Add or delete a the channel using the Add to Favorite

or Delete from Favorite menu respectively.

¦ Memorizing Channels

O

MENU

m

→ Channel → ENTER

E

Antenna (Air / Cable)

t

Before your television can begin memorizing the available

channels, you must specify the type of signal source that is

connected to the TV (i.e. an Air or a Cable system).

Auto Program

■ Air: Air antenna signal.

■ Cable: Cable antenna signal.

■ Auto: Air and Cable antenna.

6 Air

6-1 * TV #6

7 Air

8 Air

9 Air

9-1 * TV #9

10 Air

10-1 * TV #10

11-1 * TV #11

Added Channels

Delete

Add to Favorite

Timer Viewing

Channel Name Edit

Select All

Auto Program

Air Zoom Select

T

Tools

6 Air

6-1 * TV #6

7 Air

8 Air

9 Air

9-1 * TV #9

10 Air

10-1 * TV #10

11-1 * TV #11

Air Zoom Select

T

Tools

Added Channels

[PD450-ZC]BN68-03325B-00L02.indb 13 2011-01-13 오전 10:35:42

14

English

Basic Features

✎

NOTE

x

When selecting the Cable TV system: STD, HRC

and IRC identify various types of cable TV systems.

Contact your local cable company to identify the

type of cable system that exists in your particular

area. At this point, the signal source has been

selected.

x

After all the available channels are stored, it starts

to remove scrambled channels. The Auto Program

menu then reappears.

¦ Editing Channels

O

MENU

m

→ Channel → Channel List → ENTER

E

Channel Name Edit

1. Select a channel and press the TOOLS button.

2. Edit the channel name using the Channel Name Edit

menu.

■ Channel Name Edit (analog channels only): Assign your

own channel name.

¦ Other Features

O

MENU

m

→ Channel → ENTER

E

Clear Scrambled Channel

This function is used to ﬁlter out scrambled channels after

Auto Program is completed. This process may take up to

20~30 minutes.

How to Stop Searching Scrambled Channels

1. Press the ENTER

E

button to select Stop.

2. Press the ◄ button to select Yes.

3. Press the ENTER

E

button.

✎

This function is only available in Cable mode.

Channel List

Channel List Option Menu

Set each channel using the Channel List menu options (Add

/ Delete, Timer Viewing, Select All / Deselect All). Option

menu items may differ depending on the channel status.

1. Select a channel and press the TOOLS button.

2. Select a function and change its settings.

■ Add / Delete: Delete or add a channel to display the

channels you want.

✎

NOTE

x

All deleted channels will be shown on the

All Channels menu.

x

A gray-colored channel indicates the channel

has been deleted.

x

The Add menu only appears for deleted

channels.

x

Delete a channel from the Added Channels or

Favorite menu in the same manner.

■ Timer Viewing: You can set a desired channel to be

displayed automatically at the reserved time. Set the

current time ﬁrst to use this function.

1. Press the ◄ / ► / ▲ / ▼ buttons to select the

desired channel in Channel List.

2. Press the TOOLS button, then select

Timer Viewing.

3. Scroll up or down to adjust the settings in the box,

or use the numeric buttons on your remote to enter

the date and time.

✎

If you selected Once, Everyday, Every Week,

Mon~Fri, Mon~Tue, Wed~Thu or Sat~Sun in

Repeat, you can enter the date you want.

4. Press the ENTER

E

button when done.

✎

NOTE

x

Only memorized channels can be reserved.

x

Reserved programs will be displayed in the

Programmed menu.

x

When a digital channel is selected, press the ►

button to view the digital program.

■ Select All: Select all the channels in the channel list.

■ Deselect All: Deselect all the selected channels.

✎

You can only select Deselect All when one or

more channels are selected.

Programmed

(in Channel List)

You can view, modify or delete a show you have reserved

to watch. Programmed timer viewing is displayed here.

Highlight a program and press the TOOLS button to display

options.

■ Change Info: Change a show you have reserved to

watch. Begin with step 3 of “Timer Viewing,” above.

[PD450-ZC]BN68-03325B-00L02.indb 14 2011-01-13 오전 10:35:43

15

English

03 Basic Features

■ Cancel Schedules: Cancel a show you have reserved

to watch.

✎

This deletes the highlighted or selected

program(s).

■ Information: Display a show you have reserved

to watch. (You can also change the reservation

Information.)

✎

Alternatively, you can view Information by

highlighting a program and pressing the

ENTER

E

button.

■ Select All / Deselect All: Select or deselect all reserved

programs.

Fine Tune

(analog channels only)

If the reception is clear, you do not have to ﬁne tune the

channel, as this is done automatically during the search and

store operation. If the signal is weak or distorted, ﬁne tune

the channel manually. Scroll to the left or right until the image

is clear.

✎

Settings are applied to the channel you're currently

watching.

✎

Fine tuned channels that have been saved are marked

with an asterisk “*” on the right-hand side of the

channel number in the channel banner.

✎

To reset the fine-tuning, select Reset.

Picture Menu

¦ Changing the Preset Picture Mode

O

MENU

m

→ Picture → Mode → ENTER

E

Mode

Select your preferred picture type.

■ Dynamic: Suitable for a bright room.

■ Standard: Suitable for a normal environment.

■ Movie: Suitable for watching movies in a dark room.

¦ Adjusting Picture Settings

O

MENU

m

→ Picture → ENTER

E

Cell Light / Contrast / Brightness /

Sharpness / Color / Tint (G/R)

Your television has several options for adjusting picture

quality. Select an option using the up and down arrow keys,

and then press ENTER. Use the arrow keys to adjust the

option value or select an option setting. When done, press

ENTER.

✎

NOTE

x

When you make changes to Cell Light, Contrast,

Brightness, Sharpness, Color or Tint (G/R), the

OSD will be adjusted accordingly.

x

Settings can be adjusted and stored for each

external device connected to the TV.

x

You can adjust and store Settings for each external

device connected to the TV.

¦ Changing the Picture Options

Advanced Settings

O

MENU

m

→ Picture → Advanced Settings →

ENTER

E

All Advance Settings are available in the Standard and

Movie modes. In PC mode, you can only make changes to

Gamma and White Balance.

To use, select an option using the up and down arrow keys,

and the press ENTER. Use the arrow keys to change value

or setting, and then press ENTER.

■ Black Tone (Off / Dark / Darker / Darkest): Select the

black level to adjust the screen depth.

■ Dynamic Contrast (Off / Low / Medium / High):

Adjusts the screen contrast.

■ Gamma: Adjust the primary color intensity.

Advanced Settings

Black Tone : Off ►

Dynamic Contrast : Medium

Gamma : 0

Color Space : Native

White Balance

Flesh Tone : 0

Edge Enhancement : On

U

Move

E

Enter

R

Return

[PD450-ZC]BN68-03325B-00L02.indb 15 2011-01-13 오전 10:35:43

16

English

Basic Features

■ Color Space (Auto / Native): Adjust the range of colors

available to create the image.

■ White Balance: Adjust the color temperature for a more

natural picture.

R-Offset / G-Offset / B-Offset: Adjust each color’s (red,

green, blue) darkness.

R-Gain / G-Gain / B-Gain: Adjust each color’s (red,

green, blue) brightness.

Reset: Resets the White Balance to it’s default settings.

■ Flesh Tone: Emphasize pink “Flesh Tone.”

■ Edge Enhancement (Off / On): Emphasize object

boundaries.

Picture Options

O

MENU

m

→ Picture → Picture Options →

ENTER

E

■ Color Tone (Cool / Normal / Warm1 / Warm2)

✎

Warm1 or Warm2 will be deactivated when the picture

mode is Dynamic or Standard.

✎

Settings can be adjusted and stored for each external

device connected to an input on the TV.

■ Size: If you have a cable box or satellite

receiver, it may have its own set of

screen sizes as well. However, we highly

recommend you use 16:9 mode most of

the time.

16:9 : Sets the picture to 16:9 wide mode.

Zoom1: Use for moderate magniﬁcation.

Cuts off the top and sides.

Zoom2: Use for a stronger magniﬁcation.

Wide Fit: Enlarges the aspect ratio of the picture so it

ﬁts the entire screen.

✎

Available with HD 1080i / 720p signals in 16:9

mode.

4:3 : Sets the picture to basic (4:3) mode.

✎

Do not set your TV to 4:3 format for a long time.

The borders displayed on the left and right, or

top and bottom of the screen may cause image

retention (screen burn) which are not covered by

the warranty.

Screen Fit: When your TV inputs HDMI (720p / 1080i /

1080p) or Component (1080i / 1080p) signals, displays

the full image without any cut-off.

✎

NOTE

x

To use the Position function after selecting Zoom1,

Zoom2 or Wide Fit, follow these steps:

1. Press the ► button to select Position.

2. Press the ENTER

E

button.

3. Press the ▲ or ▼ button to move the picture up

or down.

4. Press the ENTER

E

button.

5. Press the ► button to select Reset.

6. Press the ENTER

E

button to reset the picture

to its default position.

x

To use the Position function after selecting

Screen Fit in HDMI (1080i/1080p) or Component

(1080i/1080p) follow these steps:

1. Press the ◄ or ► button to select Position.

2. Press the ENTER

E

button.

3. Press the ▲, ▼, ◄ or ► button to move the

picture.

4. Press the ENTER

E

button.

5. Press the ◄ or ► button to select Reset.

6. Press the ENTER

E

button.

x

HD (High Definition): 16:9 - 1080i/1080p (1920x1080),

720p (1280x720)

x

You can adjust and store settings for each external

device you have connected to an input on the TV.

Input Source Picture Size

ATV, AV,

Component (480i, 480p)

16:9, Zoom1,

Zoom2, 4:3

DTV(1080i),

Component (1080i, 1080p),

HDMI (720p, 1080i, 1080p)

16:9, 4:3, Wide Fit,

Screen Fit

■ Digital Noise Filter (Off / Low / Medium / High /

Auto): If the broadcast signal received by your TV is

weak, you can activate the

Digital Noise Filter feature to reduce any static and

ghosting that may appear on the screen.

✎

When the signal is weak, try other options until the

best picture is displayed.

P.SIZE

Picture Options

Color Tone : Normal ►

Size : 16:9

Digital Noise Filter : Auto

HDMI Black Level : Normal

Film Mode : Off

Screen Burn Protection

U

Move

E

Enter

R

Return

[PD450-ZC]BN68-03325B-00L02.indb 16 2011-01-13 오전 10:35:44

17

English

03 Basic Features

■ HDMI Black Level (Normal / Low): Lets you select the

black level on the screen to adjust the screen depth.

✎

Available only in HDMI mode.

■ Film Mode (Off / Auto): Sets the TV so that it senses

automatically and then process ﬁlm signals from all

sources and adjusts the picture for optimum quality.

✎

Available in TV, AV, COMPONENT (480i / 1080i)

and HDMI (480i / 1080i).

■ Screen Burn Protection: To reduce the possibility of

screen burn, this unit is equipped with screen burn

prevention technology. The Time setting allows you to

program the time between movement of the picture in

minutes.

Pixel Shift (Off / On): Using this function, you can

minutely move pixels on the PDP in horizontal or vertical

direction to minimize after images on the screen.

✎

Optimum condition for pixel shift

Item

TV/AV/Component/

HDMI/PC

Horizontal 0~4 4

Vertical 0~4 4

Time (minute) 1~4 min 4 min

✎

The Pixel Shift value may differ depending on the

TV size (inches) and mode.

✎

This function is not available in the Screen Fit

mode.

Scrolling: This function removes after-images on the

screen by moving all the pixels on the PDP according

to a pattern. Use this function when there are remaining

after-images or symbols on the screen, especially when

you displayed a still image on the screen for a long time.

✎

The after-image removal function has to be

executed for a long time (approximately 1 hour)

to effectively remove after-images on the screen.

If the after-image is not removed after performing

the function, repeat the function again.

✎

Press any key on the remote control to cancel this

feature.

Side Gray (Dark / Light): When you watch TV with the

screen ratio set to 4:3, the screen is prevented from any

damage by adjusting the white balance on both extreme

left and right sides.

Picture Reset (Reset Picture Mode /

Cancel)

Resets your current picture mode to its default settings.

Sound Menu

¦ Changing the Preset Sound Mode

O

MENU

m

→ Sound → Mode → ENTER

E

Select an option using the up and down arrow keys, and the

press ENTER.

Mode

Use the up and down arrow keys to select an option, and

then press ENTER.

■ Standard: Selects the normal sound mode.

■ Music: Emphasizes music over voices.

■ Movie: Provides the best sound for movies.

■ Clear Voice: Emphasizes voices over other sounds.

■ Custom: Increase the intensity of high-frequency sound

to allow a better listening experience for the hearing

impaired.

¦ Adjusting Sound Settings

O

MENU

m

→ Sound → Equalizer → ENTER

E

The Equalizer displays a series of sliders. Use the up and

down arrow keys to select a slider. Use the left and right

arrow keys to change the slider’s value. To Reset the

Equalizer, select Reset and press ENTER, then press

ENTER again. To exit, select CLOSE, and then press

ENTER.

Equalizer

Adjusts the sound output.

■ Balance L/R: Adjusts the balance between the right and

left speaker.

■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth

Adjustment): Adjusts the volume level of speciﬁc

bandwidth frequencies.

■ Reset: Resets the equalizer to its default settings.

¦ Sound Settings

O

MENU

m

→ Sound → ENTER

E

SRS TruSurround HD (Off / On)

This function provides a virtual 5.1 channel surround sound

experience through a pair of speakers using HRTF (Head

Related Transfer Function) technology.

[PD450-ZC]BN68-03325B-00L02.indb 17 2011-01-13 오전 10:35:44

18

English

Basic Features

Preferred Language

(digital channels only)

Use the up and down arrow keys to select a

language, and then press ENTER.

Digital-TV broadcasts can simultaneously

transmit many audio tracks (for example,

simultaneous translations of the program into

foreign languages).

✎

You can only select a language from

among the being broadcasted.

MTS

Multi-Track Sound (MTS)

(analog channels only)

■ Mono: Choose for channels that are

broadcasting in mono or if you are having

difﬁculty receiving a stereo signal.

■ Stereo: Choose for channels that are

broadcasting in stereo.

■ SAP: Choose to listen to the Separate

Audio Program, which is usually a

foreign-language translation.

MTS

✎

Depending on the program being broadcast, you can

listen to Mono, Stereo or SAP.

Auto Volume (Off / On)

Normal equalizes the volume level on each channel, so that

when you change channels, the volume level is the same.

Night equalizes and decrease the volume level on each

channel, so each channel is quieter. Night is useful at night,

when you may want to keep the volume low.

Speaker Select (External Speaker /

TV Speaker)

If you are listening to the sound track of a broadcast or

movie through an external receiver, you may hear a sound

echo caused by the difference in decoding speed between

the TV’s speakers and the speakers attached to your audio

receiver. If this occurs, set the TV to External Speaker.

✎

When you set Speaker Select to External Speaker,

the TV’s speakers are turned off. You will hear sound

through the external speakers only. When you set

Speaker Select to TV Speaker both the TV’s speakers

and the external speakers are on. You will hear sound

through both.

✎

When Speaker Select is set to External Speaker.

x

TV Speaker: Off, External Speaker: On

✎

When Speaker Select is set to TV Speaker.

x

TV Speaker: On, External Speaker: On

✎

If there is no video signal, both the TV’s speakers and

the external speakers will be mute.

Sound Reset (Reset All /

Reset Sound Mode / Cancel)

■ Reset All: Restore all sound settings to the factory

defaults.

■ Reset Sound Mode: Returns all sound values in the

currently selected mode to the default settings.

Setup Menu

¦ Setting the Time

O

MENU

m

→ Setup → Time → ENTER

E

Time

■ Clock: Setting the clock to use the various timer features

of the TV.

O

The current time will appear every time you press

the INFO button.

✎

If you disconnect the power cord, you have to set

the clock again.

Clock Mode (Auto / Manual)

– Auto: Have TV set the current time automatically

using the time from a digital channel.

✎

You must have the cable or antenna connected

to the TV to set the time automatically.

– Manual: Set the current time manually.

✎

Depending on the broadcast station and signal,

the auto time set up may not be correct. In this

case, set the time manually.

Clock Set: Set the Month, Day, Year, Hour, Minute and

am/pm manually. Select Clock Set. Select Date or Time,

and then press ENTER. Use the number buttons to

enter numbers or press the up and down arrow buttons.

Use the left and right arrow buttons to move from one

entry ﬁeld to the next. Press ENTER when done. To exit

Clock Set, selet Close, and press ENTER.

✎

Available only when Clock Mode is set to

Manual.

✎

You can set the Month, Day, Year, Hour and

Minute directly by pressing the number buttons

on the remote control.

Time Zone: Select your time zone.

✎

This function is only available when the

Clock Mode is set to Auto.

DST (Daylight Saving Time) (Off / On / Auto):

Switches the DST (Daylight Saving Time) function on or

off.

✎

This function is only available when the

Clock Mode is set to Auto.

[PD450-ZC]BN68-03325B-00L02.indb 18 2011-01-13 오전 10:35:45

19

English

03 Basic Features

¦ Using the Sleep Timer

O

MENU

m

→ Setup → Time → Sleep Timer →

ENTER

E

■ Sleep Timer: Automatically shuts off the

TV after a preset period of time. (30, 60,

90, 120, 150 and 180 minutes).

✎

To cancel the Sleep Timer, select

Off.

SLEEP

¦ Setting the On / Off Timer

O

MENU

m

→ Setup → Time → Timer 1 →

ENTER

E

Set On Timer so that your TV turns on automatically at a

time and on a day of your choosing.

■ Timer 1 / Timer 2 / Timer 3: Three different on / off

timer settings can be made. You must set the clock ﬁrst.

On Time / Off Time: Set the hour, minute, and activate

/ inactivate. (To activate the timer with the setting you’ve

chosen, set to Activate.)

Volume: Set the desired volume level. Use the left and

right arrow buttons to change the volume level.

Contents: Select a folder in the USB device containing

music or photo ﬁles to be played when the TV is turned

on automatically.

✎

NOTE

x

If there is no music file on the USB device or the

folder containing a music file is not selected, the

Timer function does not operate correctly.

x

When there is only one photo file in the USB,

the Slide Show will not play.

x

If a folder name is too long, the folder cannot be

selected.

x

Each USB you use is assigned its own folder.

When using more than one of the same type of

USB, make sure the folders assigned to each

USB have different names.

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,

Sat~Sun or Manual to set at you convenience. If you

select Manual, you can set up the day you want to

activate the timer.

✎

The

c

mark indicates the day is selected.

✎

Auto Power Off (available only when the TV is turned

on by the Timer): The TV will be automatically turned off

after 3 hours of being left idle to prevent overheating.

¦ Locking Programs

V-Chip

The V-Chip feature automatically locks out programs that

are deemed inappropriate for children. The user must enter a

PIN (personal identiﬁcation number) before any of the V-Chip

restrictions are set up or changed.

✎

NOTE

x

V-Chip is not available in HDMI, Component or PC

mode.

x

The default PIN number of a new TV set is “0-0-0-0”

x

Allow All: Press to unlock all TV ratings.

x

Block All: Press to lock all TV ratings.

■ V-Chip Lock (Off / On): You can block rated TV

Programs.

TV Parental Guidelines: You can block TV programs

depending on their rating. This function allows you to

control what your children are watching.

– TV-Y: Young children / TV-Y7: Children 7 and over /

TV-G: General audience / TV-PG: Parental guidance

/ TV-14: Viewers 14 and over / TV-MA: Mature

audience

– ALL: Lock all TV ratings. / FV: Fantasy violence /

V: Violence / S: Sexual situation / L: Adult Language /

D: Sexually Suggestive Dialog

✎

The V-Chip will automatically block certain

categories dealing with more sensitive material.

For example, if you block the TV-Y category,

then TV-Y7 will automatically be blocked.

Similarly, if you block the TV-G category, then all

the categories in the young adult group will be

blocked (TV-G, TV-PG, TV-14 and TV-MA). The

sub-ratings (D, L, S, V) work similarly. So, if you

block the L sub-rating in TV-PG, then the L sub-

ratings in TV-14 and TV-MA will automatically be

blocked.

20 TV Cable 3

12 00 am

▲

▼

Timer 1

On Time

Off Time

Volume

Inactivate

Sun Mon Tue Wed Thu Fri Sat

Once

Contents

Repeat

L

Move

U Adjust E

Enter

R

Return

[PD450-ZC]BN68-03325B-00L02.indb 19 2011-01-13 오전 10:35:45

20

English

Basic Features

MPAA Rating: You can block movies depending on

their MPAA rating. The Motion Picture Association of

America(MPAA) has implemented a rating system that

provides parents or guardians with advanced information

on which ﬁlms are appropriate for children.

– G: General audience (no restrictions). / PG: Parental

guidance suggested. / PG-13: Parents strongly

cautioned. / R: Restricted. Children under 17 should

be accompanied by an adult. / NC-17: No children

under age 17. / X: Adults only. / NR: Not rated.

✎

The V-Chip will automatically block any category

that deals with more sensitive material. For

example, if you block the PG-13 category, then R,

NC-17 and X will automatically be blocked.

Canadian English: You can block TV programs

depending on their Anglophone Canadian ratings.

– C: Programming intended for children under age 8. /

C8+: Programming generally considered acceptable

for children 8 years and over to watch on their own.

/ G: General programming, suitable for all audiences.

/ PG: Parental Guidance. / 14+: Programming

contains themes or content which may not be

suitable for viewers under the age of 14. / 18+: Adult

programming.

✎

The V-Chip will automatically block any category

that deals with more sensitive material. For

example, if you block the G category, then

PG, 14+ and 18+ will automatically be blocked.

Canadian French: You can block TV programs

depending on their Anglophone Canadian ratings.

– G: General / 8 ans+: Programming generally

considered acceptable for children 8 years and over

to watch on their own. / 13 ans+: Programming may

not be suitable for children under the age of 13. /

16 ans+: Programming is not suitable for children

under the age of 16. / 18 ans+: Programming

restricted to adults.

✎

The V-Chip will automatically block any category

that deals with more sensitive material. For

example, if you block the 8 ans+ category, then

13 ans+, 16 ans+ and 18 ans+ will automatically

be blocked also.

Downloadable U.S. Rating: Parental restriction

information can be used while watching DTV channels.

✎

NOTE

x

If information is not downloaded from the

broadcasting station, the

Downloadable U.S. Rating menu is

deactivated.

x

Parental restriction information is automatically

downloaded while watching DTV channels. It

may take several seconds.

x

The Downloadable U.S. Rating menu

is available for use after information is

downloaded from the broadcasting station.

However, depending on the information from

the broadcasting station, it may not be available

for use.

x

Parental restriction levels differ depending on

the broadcasting station. The default menu

name and Downloadable U.S. Rating change

depending on the downloaded information.

x

Even if you set the on-screen display to another

language, the Downloadable U.S. Rating

menu will appear in English only.

x

The rating will automatically block certain

categories that deal with more sensitive

material.

x

The rating titles (For example: Humor Level..etc)

and TV ratings (For example: DH, MH, H..etc)

may differ depending on the broadcasting

station.

■ Change PIN: The Change PIN screen will appear.

Choose any 4 digits for your PIN and enter them. As

soon as the 4 digits are entered, the

Conﬁrm New PIN screen appears. Re-enter the same

4 digits. When the Conﬁrm screen disappears, your PIN

has been memorized.

How to watch a restricted channel

If the TV is tuned to a restricted channel, the V-Chip will

block it. The screen will go blank and the following message

will appear:

This channel is blocked by V-Chip. Please enter the PIN to

unblock.

✎

If you forget the PIN, press the remote-control buttons

in the following sequence, which resets the pin to

“0-0-0-0”: POWER (off) → MUTE → 8 → 2 → 4 →

POWER(on)

[PD450-ZC]BN68-03325B-00L02.indb 20 2011-01-13 오전 10:35:45

La page charge ...

Samsung PN43D440 Manuel utilisateur

Ce manuel convient également à

Samsung PN43D440 Manuel utilisateur

dans d''autres langues

Documents connexes