LG TPNC306SLA1 Le manuel du propriétaire

Marque: LG

Modèle: TPNC306SLA1

Catégorie: Climatiseurs split-system

Taper: Le manuel du propriétaire

Ce manuel convient également à

TPNC306SLA1.ANWBASA

P/NO : MFL42763408

www.lg.com

OWNER’S MANUAL

AIR CONDITIONER

Please read this manual carefully before operating

your set and retain it for future reference.

TYPE : CEILING CASSETTE

P/NO : MFL6

ENGLISH ENGLISH

FRANÇAIS

PORTUGUÊS

BAHASA

2 Floor Standing Air Conditioner

Floor Standing Air Conditioner Owner’s Manual

TABLE OF CONTENTS

FOR YOUR RECORDS

Write the model and serial numbers here:

Model #

Serial #

You can find them on a label on the side of each

unit.

Dealer's Name

Date Purchased

■

Staple your receipt to this page in the event you

need it to prove date of purchase or for warranty

issues.

READ THIS MANUAL

Inside you will find many helpful hints on how to use and

maintain your air conditioner properly. Just a little

preventive care on your part can save you a great deal

of time and money over the life of your air conditioner.

You'll find many answers to common problems in the

chart of troubleshooting tips. If you review our chart of

Troubleshooting Tips first, you may not need to call for

service at all.

PRECAUTION

• Contact the authorized service technician for repair or

maintenance of this unit.

• Contact the installer for installation of this unit.

• The air conditioner is not intended for use by young

children or invalids without supervision.

• Young children should be supervised to ensure that

they do not play with the air conditioner.

• When the power cord is to be replaced, replacement

work shall be performed by authorized personnel only

using only genuine replacement parts.

• Installation work must be performed in accordance

with the National Electric Code by qualified and

authorized personnel only.

Safety Precautions.................3

Prior to Operation ..................8

Introduction ............................8

Operating Instructions...........9

Maintenance and Service ....20

Safety Precautions

Owner's Manual 3

ENGLISH

Safety Precautions

To prevent injury to the user or other people and property damage, the following instructions

must be followed.

■ Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is

classified by the following indications.

■ Meanings of symbols used in this manual are as shown below.

WARNING

CAUTION

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage.

Be sure not to do.

Be sure to follow the instruction.

WARNING

■ Installation

Do not use a defective or

underrated circuit breaker.

Use this appliance on a

dedicated circuit.

• There is risk of fire or electric

shock.

For electrical work, contact

the dealer, seller, a qualified

electrician, or an Authorized

Service Center.

• Do not disassemble or repair

the product. There is risk of fire

or electric shock.

Always ground the product.

• There is risk of fire or electric

shock.

Install the panel and the

cover of control box

securely.

• There is risk of fire or electric

shock.

Always install a dedicated

circuit and breaker.

• Improper wiring or installation

may cause fire or electric

shock

Use the correctly rated

breaker or fuse.

• There is risk of fire or electric

shock.

Safety Precautions

4 Floor Standing Air Conditioner

■ Operation

Do not modify or extend the

power cable.

• There is risk of fire or electric

shock.

Do not install, remove, or re-

install the unit by yourself

(customer).

• There is risk of fire, electric

shock, explosion, or injury.

Be cautious when unpacking

and installing the product.

• Sharp edges could cause

injury. Be especially careful of

the case edges and the fins on

the condenser and evaporator.

For installation, always contact the

dealer or an Authorized Service Center.

• There is risk of fire, electric

shock, explosion, or injury.

Do not install the product on a

defective installation stand.

• It may cause injury, accident,

or damage to the product.

Be sure the installation area

does not deteriorate with age.

• If the base collapses, the air

conditioner could fall with it,

causing property damage,

product failure, and personal

injury.

Do not plug or unplug the

power supply plug during

operation.

• There is risk of fire or electric

shock.

Do not touch(operate) the

product with wet hands.

• There is risk of fire or electrical

shock.

Do not place a heater or

other appliances near the

power cable.

• There is risk of fire and electric

shock.

Do not let the air conditioner run for a

long time when the humidity is very high

and a door or a window is left open

• Moisture may condense and

wet or damage furniture.

Take care to ensure that power

cable could not be pulled out or

damaged during operation.

• There is risk of fire or electric

shock.

Do not place anything on the

power cable.

• There is risk of fire or electric

shock.

Safety Precautions

Owner's Manual 5

ENGLISH

Do not allow water to run

into electric parts.

• It may cause There is risk of

fire, failure of the product, or

electric shock.

Do not store or use flammable

gas or combustibles near the

product.

• There is risk of fire or failure of

product.

Do not use the product in a

tightly closed space for a

long time.

• Oxygen deficiency could occur.

When flammable gas leaks,

turn off the gas and open a

window for ventilation

before turn the product on.

• Do not use the telephone or turn

switches on or off.

There is risk of explosion or fire

If strange sounds, or small or

smoke comes from product. Turn

the breaker off or disconnect the

power supply cable.

• There is risk of electric shock or

fire.

Stop operation and close the window

in storm or hurricane. If possible,

remove the product from the window

before the hurricane arrives.

• There is risk of property

damage, failure of product, or

electric shock.

Do not open the inlet grill of the

product during operation.

(Do not touch the electrostatic

filter, if the unit is so equipped.)

• There is risk of physical injury,

electric shock, or product failure.

When the product is soaked

(flooded or submerged),

contact an Authorized

Service Center.

• There is risk of fire or electric

shock.

Be cautious that water could

not enter the product.

• There is risk of fire, electric

shock, or product damage.

Gasolin

Ventilate the product from time to time when

operating it together with a stove, etc.

• There is risk of fire or electric shock.

Turn the main power off when cleaning or

maintaining the product.

• There is risk of electric shock.

Safety Precautions

6 Floor Standing Air Conditioner

■ Installation

CAUTION

■ Operation

Always check for gas (refrigerant)

leakage after installation or repair

of product.

• Low refrigerant levels may

cause failure of product.

Install the drain hose to

ensure that water is drained

away properly.

• A bad connection may cause

water leakage.

Keep level even when

installing the product.

• To avoid vibration or water

leakage.

Do not install the product where the

noise or hot air from the outdoor unit

could damage the neighborhoods.

• It may cause a problem for

your neighbors.

Use two or more people to lift

and transport the product.

• Avoid personal injury.

Do not install the product where it

will be exposed to sea wind (salt

spray) directly.

• It may cause corrosion on the

product. Corrosion, particularly

on the condenser and

evaporator fins, could cause

product malfunction or

inefficient

operation.

90°

When the product is not be used for a long

time, disconnect the power supply plug or

turn off the breaker.

• There is risk of product damage or failure, or

unintended operation.

Take care to ensure that nobody could step

on or fall onto the outdoor unit.

• This could result in personal injury and product

damage.

Do not expose the skin directly to cool air for

long periods of time.

(Don't sit in the draft.)

• This could harm to your health.

Do not use the product for special purposes, such as

preserving foods, works of art, etc. It is a consumer air

conditioner, not a precision refrigeration system.

• There is risk of

damage or

loss of property.

Safety Precautions

Owner's Manual 7

ENGLISH

Do not block the inlet or

outlet of air flow.

• It may cause product failure.

Use a soft cloth to clean. Do

not use harsh detergents,

solvents, etc.

• There is risk of fire, electric

shock, or damage to the plastic

parts of the product.

Do not touch the metal parts of

the product when removing the

air filter. They are very sharp!

• There is risk of personal injury.

Wax

Thinner

Do not step on or put

anyting on the product.

(outdoor units)

• There is risk of personal injury

and failure of product.

Always insert the filter securely.

Clean the filter every two weeks

or more often if necessary.

• A dirty filter reduces the

efficiency of the air conditioner

and could cause product

malfunction or damage.

Do not insert hands or other

objects through the air inlet or

outlet while the product is operated.

• There are sharp and moving

parts that could cause personal

injury.

Do not drink the water

drained from the product.

• It is not sanitary and could cause

serious health issues.

Use a firm stool or ladder

when cleaning or

maintaining the product.

• Be careful and avoid personal

injury.

Replace the all batteries in the

remote control with new ones of

the same type. Do not mix old

and new batteries or different

types of batteries.

• There is risk of fire or explosion

Do not recharge or disassemble the batteries.

Do not dispose of batteries in a fire.

• They may burn or explode.

If the liquid from the batteries gets onto your

skin or clothes, wash it well with clean water. Do

not use the remote if the batteries have leaked.

• The chemicals in batteries could cause burns or

other health hazards.

Prior to Operation

8 Floor Standing Air Conditioner

Prior to Operation

1. Contact an installation specialist for installation.

2. Plug in the power plug properly.

3. Use a dedicated circuit.

4. Do not use an extension cord.

5. Do not start/stop operation by plugging/unplugging the power cord.

6. If the cord/plug is damaged, replace it with only an authorized replacement part.

1. Being exposed to direct airflow for a long time may be hazardous to your health. Do not expose

occupants, pets, or plants to direct airflow for a long time.

2. Due to the possibility of oxygen deficiency, ventilate the room when using the appliance

together with stoves or other heating devices.

3. Do not use this air conditioner for non-specified special purpose (e.g. preserving precision

devices, food, pets, plants, or art objects). Such use may damage your properties.

1. Do not touch the metal parts of the unit when removing the filter. Injury can occur.

2. Do not use water to clean inside the air conditioner. Exposure to water can destroy the

insulation, leading to electric shock.

3. When cleaning the unit, first make sure that the power and breaker are turned off. The fan

rotates at a very high speed during operation. There is a possibility of injury if the unit’s power is

triggered while cleaning inner parts of the unit.

For repair and maintenance, contact your authorized service dealer.

Preparing for Operation

Usage

Cleaning and Maintenance

Service

Introduction

This symbol alerts you to the risk of electric shock.

This symbol alerts you to hazards that may cause harm to the

air conditioner.

This symbol indicates special notes.

NOTICE

Symbols used in this Manual

Operating Instructions

Owner's Manual 9

ENGLISH

Operating Instructions

Features and Specifications

INDOOR UNIT

1. Air Outlet Vent

2. Control Panel

3. Air Intake Vent

OUTDOOR UNIT

1. Air Outlet

2. Air Inlet(Rear Side)

3. Control Cover

4. Base Panel

5. Ground Terminal

6. Refrigerant Pipe Port

7. Top Cover

1. 3D Wide Airflow System

3D Wide Airflow makes clear a dead

Zone to cool the indoor evenly within a

Early time

2. Whisper quiet operation

3. 3 Fan Step Cooling

4. 3 minutes Delay Circuit

5. Turbo-Z Operation

6. Auto Restart

7. Child Lock Function

Operating Instructions

10 Floor Standing Air Conditioner

Indoor Unit Controls and Indicators

1. Room &Setting Temperature Display

2. Cooling Operation Display

3. Soft Dry Operation Display

4. Fan Operation Display

5. Auto Operation Display

6. Outdoor Unit Operation Display

7. Off Timer Operation Display

Operating Instructions

Owner's Manual 11

ENGLISH

Name and Function-Remote Control

1. Signal Transmitter

Transmits the signals to the Floor Standing

Type air conditioner

2. Operation Display of the Remote Control

3. Fan Operation Button

4. Auto Airflow direction Control Button

The Top Vane swings up and down

5. Jet Cool(Turbo-Z) Operation Button

6. Indoor Fan Speed Selection Button

7. Temperature Setting Button

8. Power ON/OFF Button

Operation will start when this button is

pressed,and stop when the button is pressed

again.

9. Simple Off Timer Setting Button

Each time is pressed,the mode is changed in

the Following process, Tim set

(0,1,2,3,4,5,6,7 hrs) If you select "0",Timer

function will be canceled

10. Auto Airflow direction Control Button

The Side Vane swings left and right

11. Soft Dry Operation Button

12. Auto Operation Button

13. Cooling ON Button

Operating Instructions

12 Floor Standing Air Conditioner

Remote Control Preparation

How to insert batteries

Wireless Remote Control Puts all functions at your fingertips

1. Remove the cover from the back of the

remote controller.

• Slide the cover according to the arrow

direction.

2. Insert two batteries.

• Be sure that the (+) and (-) directions are

correct.

• Be sure that both batteries are new.

3. Re-attach the cover.

• Slide the cover into back position.

• Do not use rechargeable

batteries such batteries as

different from standard dry cells

in shape, dimensions, and

performance.

• Change the batteries with a

new one if the remote control

does not work properly after

using for an extended length of

time.

Handling the remote control

• Aim at the signal receptor on the Floor Standing Type air conditioner when operating.

• The remote control signal can be received at a distance of up to about 7meters.

• Be sure that there are no obstructions between the remote control and the signal receptor.

• Do not drop or throw the remote control.

• Do not place the remote control in a location exposed to direct sunlight,or next to a heating unit,or other

heat source.

Operating Instructions

Owner's Manual 13

ENGLISH

After

4 seconds

To raise the temperature

To lower the temperature

Low

Mid

High

Cooling Operation Mode

Press the on/off button.

Press the Mode Button

Select the cooling operation Mode( )

Set the temperature lower than the room temperature.

The temperature can be set within a range of 16°C~30°C by 1°C.

When you finish the temperature setting.

Set the Fan Speed.

❑ Each time the Fan Speed Button is pressed (or fan speed key is touched), the

Fan Speed mode is shifted in the arrow direction.

Operating Instructions

14 Floor Standing Air Conditioner

Temp. Fan Speed On/Off

Mode

Temp. Fan Speed On/Off

Mode

Temp. Fan Speed On/Off

Mode

Temp. Fan Speed On/Off

Mode

ROOM

SET

L M H

FAN SPEED

To raise the temperature

To lower the temperature

Low

Mid

High

Soft Dry Operation

Press the on/off button.

Press the Mode Button

Select the Soft Dry Operation Mode( )

Set the temperature lower than the room temperature.

The temperature can be set within a range of 16°C~30°C by 1°C.

During Softy Dry Operation

• The indoor fan speed is automatically set to low and can be set fan speed.

Operating Instructions

Owner's Manual 15

ENGLISH

Temp. Fan Speed On/Off

Mode

ROOM

SET

L M H

FAN SPEED

Turbo-Z cooling Operation

❏ During the Turbo-Z Cooling function at any moment, the A/C starts to blow the cool air

at extremely high speed setting the room temp. automatically to 18°C. It is especially

used to cool the room temp. in the shortest time in a hot summer.

❏ In order to return to the normal cooling mode from the Turbo-Z Cooling mode, you just

press either the operation mode selection button, or the Turbo-Z Cooling button again.

NOTICE

Press the on/off button.

Press the Turbo-Z Cooling button to operate the speed cooling mode and the unit

will operate in super high fan speed on cooling mode.

To cancel the Turbo-Z Cooling mode, press the Turbo-Z Cooling button again or the Auto

Swing Direction Control Button (Up & Down, Left & Right) and the unit will operate in Mid

Fan speed on cooling mode.

Operating Instructions

16 Floor Standing Air Conditioner

Fan Operation Mode

Airflow Direction Procedure

Press the on/off button.

Press the Fan Operation Button.

Press the Auto Swing Button and then louvers will swing left

and right.

Press the Airflow Direction Control Button again to set the

Vertical louver at the desired airflow direction.

The vertical louver swing left and right.

Press the Auto Swing Button and then louvers will swing up

and down.

Press the Airflow Direction Control Button again to set the

horizontal louver at the desired airflow direction.

The horizontal louver swing up and down.

Operating Instructions

Owner's Manual 17

ENGLISH

Auto Operation

Cold

Cool Proper

Warm Hot

Temp. Fan Speed On/Off

Mode

Temp. Fan Speed On/Off

Mode

To raise the temperature

(This indication will be shifted to the initial

uto Mode Display state after 4 seconds.)

To lower the temperature

Press the on/off button.

Press the Mode Button

Select the Artificial Intelligence Operation Mode( )

Set the temperature lower than the room temperature.

The temperature can be set within a range of by 1 level.

During Artificial Intelligence Operation

• The indoor fan speed is automatically set to low and can be set fan speed.

Operating Instructions

18 Floor Standing Air Conditioner

After 4

seconds

After 4

seconds

OFF Timer Setting Procedure(OFF TIMER Setting, or CANCEL)

When you finish the Off Timer setting, the Timer indicator lights off.

Press the on/off button.

Press the Timer Button.

During off-timer operation if you press the Timer Button, the rest time will be displayed.

• If you press the button, the selected off timer is displayed as follows;

• If you select ‘ ’, the Off Timer function will be cancelled.

Maintenance and Service

Owner's Manual 19

ENGLISH

Child Lock Operation Procedure

Touched the fan speed and high temperature setting keys simultaneously for 3 seconds.

The display key will be locked with beep after 3 seconds.

During Child Lock Operation

➊ Whenever you Touch any key on Display panel, it will immediately display

“ ”, which means Display panel is Locked.

❷ All the key on the indoor unit Display panel will not work.

❸ But the key on the remote controller will work.

For releasing child lock Operation

Press the fan speed and high temperature setting keys simultaneously for 3 seconds again.

The unit will respond with beep, Child Lock Operation will removed.

Auto restart

In case the power comes on again after a power failure, Auto Restarting Operation is the function to

operate procedures automatically to the previous operating conditions.

Maintenance and Service

20 Floor Standing Air Conditioner

Maintenance and Service

During the season

When the air conditioner is not going to be used for a long time

CAUTION : Before performing any maintenance, turn off the main power to the system.

Cleaning of the air filters.

Recommended about once every two weeks

Remove the Air Filter.

Take hold of the tab and pull slightly forward

to remove the filter.

Clean.

• To remove the dust adhering to the filters,

either use a vacuum cleaner, or wash them in

water and dry in the shade.

• Re-insert the filter to the original position.

Cleaning of the air conditioner

• Don’t wash with water.

• Wipe with a soft dry cloth.

Never use any of the followings.

• Water hotter than 40°C.

Could cause

deformation and/or

discoloration.

• Volatile substances.

Could damage the

surfaces of the air

conditioner.

CAUTION

Operate the air conditioner at the following

settings for 2 to 3 hours.

• Type of operation : Fan.

• Temperature setting : 30°C.

This will dry out the internal mechanisms.

Remove the batteries from the Remote Control.

Turn off the circuit breaker.

Turn off the circuit breaker when the air conditioner

is not going to be used for a long time.

Dirt may collect and may cause a fire.

At the end of the season

At the start of the season

Clean the air filters, re-insert, then operate

the air conditioner.

Be sure that nothing obstructs the air outlet

and intake vents.

Do not overcool the room.

This is not good for your health and

wastes electricity.

Make sure that the doors

and windows are shut tight.

Avoid opening doors and windows

as much as possible to keep the

cool air in the room.

Keep blinds or curtains closed.

Do not let direct sunshine enter the

room when the air conditioner is in

operation.

Clean the air filter regularly.

Blockages in the air filter reduce

the airflow and lower cooling and

dehumidifying effects. Clean at

least once every two weeks.

Keep the room temperature

uniform.

Adjust the vertical and horizontal

airflow direction to ensure a

uniform temperature in the room.

Ventilate the room occasionally.

Since windows are kept closed, it

is a good idea to open them and

ventilate the room now and then.

Operation Tips

La page charge ...

LG TPNC306SLA1 Le manuel du propriétaire

Marque: LG

Modèle: TPNC306SLA1

Catégorie: Climatiseurs split-system

Taper: Le manuel du propriétaire

Ce manuel convient également à

TPNC306SLA1.ANWBASA

Télécharger le PDF

rapport

dans d''autres langues

English: LG TPNC306SLA1 Owner's manual
português: LG TPNC306SLA1 Manual do proprietário

Documents connexes

Autres documents

Yamaha YRS20BP Le manuel du propriétaire