Hampton Bay HB3672-339 Mode d'emploi

Taper
Mode d'emploi
USE AND CARE GUIDE
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this vanity light. We
strive to continually create quality products designed to enhance your home. Visit us online to see our full line of
products available for your home improvement needs. Thank you for choosing Hampton Bay!
VANITY LIGHT
ELMCROFT
Item Model
1006 331 641
1006 330 992
1006 330 588
1006 331 650
HB3670-35
HB3670-336
HB3670-337
HB3670-338
HB3670-339
1006 403 094
Table of Contents
Safety Information
Before starting installation of this fixture or removal
of a previous fixture, disconnect the power by
turning off the circuit breaker or by removing the
fuse at the fuse box.
Consult a qualified electrician if you have any
electrical questions or need to replace the driver.
If you have any non-electrical questions about this
fixture, please contact our Customer Service Team at
1-855-HD-HAMPTON or www.hamptonbay.com.
WARNING: Disconnect the power prior to removing
or installing a light fixture.
Warranty
Installation 5
Operation 7
Care and Cleaning 7
Exterior Maintenance 7
Interior Maintenance 7
Troubleshooting 7
Table of Contents 2
Safety Information 2
Warranty 2
Pre-Installation 3
Planning the Installation 3
Tools Required 3
Hardware Included 3
Package Contents 4
2
WHAT IS COVERED
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of three
(3) years from date of purchase. This warranty applies only to the original consumer purchaser and only to products
used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your
exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product
has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling.
WHAT IS NOT COVERED
This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way
not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product
as a result of an accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to
faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface
and/or weathering, as this is considered normal wear and tear.
The manufacturer does not warrant and specially disclaims any warranty, whether expressed or implied, of fitness for a
particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and
shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs
involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
Pre-installation
PLANNING THE INSTALLATION
Read all instructions before assembly and installation. Before starting installation of the fixture or removal of a previous
fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid
damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: Keep your receipt and these
instructions for Proof of Purchase.
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
3
Part Description Quantity
AA Wire Nut 3
BB Fixture Screw 2
CC Mounting Screw 2
DD Socket Ring 1
EE Mounting Bracket 1
FF Socket Tool 1
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Ladder Safety
Goggles
1 x 60W
Incandescent
Bulb or LED
or CFL
Equivalent
Electrical
Tape
Phillips
Screwdriver
Flathead
Screwdriver Wire
Cutte
r
Wire
Stripper
EE
AA CCBB DD FF
Pre-installation (continued)
PACKAGE CONTENTS
Part Description Quantity
A Shade 1
B Fixture Body 1
4
B
A
1Attaching the mounting
bracket
Pull the supply wires out from the outlet box and
mount the mounting bracket (EE) to the outlet box
using the mounting screws (CC).
5
2Connecting the wires
Connect the black supply wire to the black fixture
wire using a wire nut (AA).
Connect the white supply wire to the white fixture
wire using a wire nut (AA).
Loop the supply ground wire around the ground
screw on the mounting bracket and tighten it in
place.
Connect the fixture ground wire to the supply
ground wire using a wire nut (AA).
Wrap all wire connections with electrical tape for a
more secure connection.
Installation
CC
EE
NOTE: If you have electrical questions consult
your local electrical code for approved
grounding methods. EE
AA
B
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
3Securing the fixture
Place the fixture body (B) onto the mounting bracket
(EE).
Attach the fixture body (B) to the mounting bracket
(EE) using the Fixture screws (BB).
6
4Assembling the fixture
Place the steel shade (A) over the socket on the
fixture body (B). Use socket tool (FF) to tighten the
ring (DD) and secure the shade (A) in place.
Screw a bulb into the socket on the fixture body (B).
Installation (continued)
NOTE: Do not exceed a 60 watt incandescent
light bulb or equivalent CFL or LED bulb. B
A
BB
B
DD
FF
EE
Operation
Turn on power at the circuit breaker or fuse box.
Turn the light switch on to activate the fixture.
7
EXTERIOR MAINTENANCE
Use a dry or slightly dampened clean cloth and wipe
the surface of the fixture
INTERIOR MAINTENANCE
Disconnect power to the fixture by turning off the
circuit breaker or by removing the fuse at the fuse
box.
Use a dry or slightly dampened clean cloth to wipe
the interior surface of the fixture.
Care and Cleaning
Troubleshooting
NOTE: Do not use any cleaners with
chemicals, solvents, or harsh abrasives. Use
only a dry soft cloth to dust or wipe carefully.
Problem Solution
The light will not turn on.
Make sure the power supply is on.
Test or replace the switch.
Check the wiring.
The fuse blows or circuit breaker trips when light
is turned on. Check the wire connections.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
GUÍA DE USO Y MANTENIMIENTO
Preguntas, problemas, o piezas faltantes? Antes de regresar a la tienda,
llama al Servicio al Cliente de Hampton Bay
8 a.m. – 7 p.m Hora del Este, Lunes – Viernes, 9 a.m. – 6 p.m., Hora del Este, Sábado
1-855-HD-HAMPTON
HAMPTONBAY.COM
LUZ DE BAÑO
ELMCROFT
GRACIAS
Le agradecemos la confianza que han depositado en Hampton Bay a través de la compra de esta luz de baño. Nos
esforzamos continuamente para crear productos de calidad diseñados para mejorar su casa. Visite nuestra página
web para ver nuestra completa línea de productos disponibles para mejorar tu hogar. Gracias por elegir Hampton
Bay!
Artículo Modelo
1006 331 641
1006 330 992
1006 330 588
1006 331 650
1006 403 094
HB3670-35
HB3670-336
HB3670-337
HB3670-338
HB3670-339
Tabla de Contenidos
Información de Seguridad
Antes de iniciar la instalación de este aparato o la
eliminación de un accesorio anterior, desconecte la
alimentación apagando el disyuntor o quitando el
fusible en la caja de fusibles.
Consulte a un electricista calificado si tiene alguna
pregunta eléctrica o la necesidad de reemplazar el
controlador.
Si usted tiene alguna pregunta que no sea eléctrica
sobre este accesorio, póngase en contacto con
nuestro equipo de Servicio al Cliente al
1-855-HD-HAMPTON o www.hamptonbay.com.
ADVERTENCIA: Desconecte la alimentación antes
de extraer o instalar una lámpara.
Garantía
10
LO QUÉ ESTÁ CUBIERTO
El fabricante garantiza que este accesorio de iluminación está libre de defectos en materiales y mano de obra por un
período de tres (3) años a partir de la fecha de compra. Esta garantía se aplica sólo al comprador original y únicamente
a los productos utilizados en condiciones normales de uso y servicio. Si el producto se encuentra defectuoso, la única
obligación del fabricante, y su solución exclusiva, es la reparación o sustitución del producto, a discreción del fabricante,
siempre que el producto no ha sido dañado por mal uso, abuso, accidente, modificaciones, alteraciones , negligencia o
mal manejo.
LO QUE NO ESTÁ CUBIERTO
Esta garantía no se aplicará a cualquier producto que haya sido instalado de forma incorrecta o usado de manera que
no conforme con las instrucciones suministradas con el producto. Esta garantía no se aplicará a una falla del producto
como resultado de un accidente, mal uso, abuso, negligencia, alteración o instalación defectuosa, o cualquier otra falla
no relacionada con defectos de material o mano de obra. Esta garantía no se aplicará a el acabado de cualquier parte
del producto, tal como la superficie y / o la intemperie, ya que esto se considera como uso normal.
El fabricante no garantiza y especialmente niega cualquier garantía, ya sea expresa o implícita, de aptitud para un fin en
particular, que no sea la garantía contenida en el presente documento. El fabricante declina específicamente cualquier
responsabilidad y no será responsable por cualquier pérdida o daño consecuente o incidental, incluyendo pero no
limitado a cualquier coste laboral / gastos involucrados en la sustitución o reparación de dicho producto.
Comuníquese con el Equipo de Servicio al Cliente al 1-855-HD-HAMPTON o visite www.hamptonbay.com.
Instalación 13
Operación 15
Cuidado y Limpieza 15
Mantenimiento del Exterior 15
Mantenimiento del Interior 15
Solución de Problemas 15
Tabla de Contenidos 10
Información de Seguridad 10
Garantía 10
Pre-Instalación 11
Planificación de la Instalación 11
Herramienta Necesarias 11
Ferretería Incluida 11
Contenido del Paquete 12
Pre-instalación
PLANIFICACIÓN DE LA INSTALACIÓN
Lea todas las instrucciones antes del montaje e instalación. Antes de comenzar la instalación de la luminaria o el retiro
de un artefacto anterior, desconecte la alimentación apagando el disyuntor o quitando el fusible en la caja de fusibles.
Para evitar daños a este producto, montarlo en una superficie suave y no abrasiva, como una alfombra o cartón.
NOTA: Guarde su recibo y estas instrucciones
para comprobante de compra.
HERRAMIENTA NECESARIAS
FERRETERÍA INCLUIDA
NOTA: La ferretería no se muestra a tamaño
actual.
11
Parte Descripción Cantidad
AA Tuerca para Cables 3
BB Tureca del Luminario 2
CC Tornillo de Montaje 2
DD Anillo del Zócalo 1
EE Ménsula de Montaje 1
FF Herramienta para el Zócalo 1
HAMPTONBAY.COM
Para obtener asistencia llama al 1-855-HD-HAMPTON.
Escaler
a
Gafas de
Segurida
d
1 Bombilla
incandescente de
60 Vatios o LED o
Fluorescente
compacto
equivalente
Cinta
Aislant
e
Desarmad
or de Cruz
Desarmador
Plano Cortador
de
Alambre
Pela-
cables
EE
AA CCBB DD FF
Pre-instalación (continuado)
CONTENIDO DEL PAQUETE
12
Parte Descripción Cantidad
A Pantalla 1
B Cuerpo Principal 1
B
A
1Sujetando la ménsula de
montaje
Saque los cables de alimentación de la caja de
distribución y monte la ménsula de montaje (EE)
sobre la caja de distribución utilizando los tornillos
de montaje (CC).
13
2Conectando los cables
Conecte el negro blanco de alimentación con el
negro blanco del luminario usando una tuerca para
cables (AA).
Conecte el cable blanco de alimentación con el
cable blanco del luminario usando una tuerca para
cables (AA).
Enrolle el cable de tierra de alimentación alrededor
del tornillo a tierra en el ménsula de montaje y
asegúrelo en su lugar.
Conecte el cable del luminario a tierra con el cable
de alimentación a tierra usando una tuerca para
cables (AA).
Envuelva todas las conexiones de los cables con
cinta de aislar para una conexión más segura
Instalación
CC
EE
EE
AA
B
NOTA: Si tiene dudas con las conexiones
eléctricas, consulte el código eléctrico de su
localidad para los métodos aprobados para las
conexiones a tierra
HAMPTONBAY.COM
Para obtener asistencia llama al 1-855-HD-HAMPTON.
3Ensamblando el luminario
Coloque la placa del curepo principal (B) sobre el
ménsula de montaje (EE).
Fije el cuerpo principal (B) al ménsula de montaje
(EE) con los Tureca del Luminario (BB).
14
4Ensamblando el luminario
Coloque la pantalla (A) de acero sobre el
zócalo en el cuerpo principal (B). Use la
herramienta para el zócalo (FF) el anillo del
Zócalo (DD) para asegurar la pantalla (A)
en su lugar.
Enrosque un bombilla en el zócalo del cuerpo
principal (B).
Instalación (continuado)
NOTA: No exceda bombilla incandescente de
60 vatios o bombillas equivalentes de CFL o
LED. B
A
BB
B
DD
FF
EE
Operación
Conecte la alimentación en el disyuntor o caja de fusibles.
Gire el interruptor de la luz para activar el aparato.
15
MANTENIMIENTO DEL EXTERIOR
Use un paño limpio y seco o ligeramente
humedecido y limpie la superficie de la linterna.
MANTENIMIENTO DEL INTERIOR
Apague la potencia a la linterna de manera de
desconectando el disyuntor o quitando el fusible en
la caja de fusibles.
Use un paño limpio y seco o ligeramente
humedecido y limpie la superficie de la linterna.
Cuidado y Limpieza
Solución de Problemas
NOTA: No use limpiadores con químicos,
solventes o abrasivos fuertes. Use sólo un
paño seco para sacudir o limpiar con cuidado.
Problema Solución
La luz no se enciende.
Asegúrese de que la energía eléctrica esté encendida.
Pruebe o cambie el interruptor.
Verifique los cableado.
El fusible se funde o el disyuntor de circuitos se dispara
cuando se enciende la luz. Verifique las conexiones de los cables.
HAMPTONBAY.COM
Para obtener asistencia llama al 1-855-HD-HAMPTON.
Preguntas, problemas, o piezas faltantes? Antes de regresar a la tienda,
llama al Servicio al Cliente de Hampton Bay
8 a.m. – 7 p.m Hora del Este, Lunes – Viernes, 9 a.m. – 6 p.m., Hora del Este, Sábado
1-855-HD-HAMPTON
HAMPTONBAY.COM
Conserve este manual para futuras consultas.
GUIDE D'UTILISATION ET D'ENTRETIEN
Questions, problèmes, pièces manquantes? Avant de retourner au magasin,
appeler Hampton Bay Service à la clientèle
8:00 – 19:00, HNE, Lundi – Vendredi, 9:00 – 18:00, HNE, Samedi
1-855-HD-HAMPTON
HAMPTONBAY.COM
LUMINAIRE DE BAIN
ELMCROFT
MERCI
Nous apprécions la confiance que vous avez placée dans Hampton Bay grâce à l'achat de cette luminaire de bain.
Nous nous efforçons de créer continuellement la qualité des produits conçus pour améliorer votre maison. Rendez-
nous visite en ligne pour voir notre gamme complète de produits disponibles pour votre maison besoin d'amélioration.
Merci d'avoir choisi le Hampton Bay!
Article Modèle
1006 331 641
1006 330 992
1006 330 588
1006 331 650
1006 403 094
HB3670-35
HB3670-336
HB3670-337
HB3670-338
HB3670-339
Table des Matières
Consignes de Sécurité
Avant de commencer l'installation de ce luminaire
ou à la dépose d'un précédent luminaire,
débrancher l'alimentation en désactivant le
disjoncteur ou en retirant le fusible de la platine de
fusibles.
Consulter un électricien qualifié si vous avez des
questions électriques ou si vous avez besoin de
remplacer le pilote.
Si vous avez des non-électriques questions au
sujet de ce luminaire, veuillez contacter notre équipe
de Service Clientèle au 1-855-HD-HAMPTON ou
www.hamptonbay.com.
AVERTISSEMENT : Déconnecter l'alimentation
avant le retrait ou l'installation d'un luminaire
d'éclairage.
Garantie
18
CE QUI EST COUVERT
Le fabricant garantit ce luminaire est exempt de défauts de matériaux et de fabrication pour une période de trois (3) ans
à compter de la date d'achat. Cette garantie s'applique uniquement à l'acheteur d'origine et uniquement aux produits
utilisés dans une utilisation normale. Si le produit s’avère défectueux, la seule obligation du fabricant, et votre seul
recours, consiste à réparer ou à remplacer le produit, à la discrétion du fabricant, pourvu que le produit n’ait pas fait
l’objet d’un usage inadéquat ou abusif, d’un accident, de modifications, d’altérations, de négligence ou d’une mauvaise
manipulation.
CE QUI N'EST PAS COUVERT
Cette garantie ne s'applique pas à tout produit qui se trouve à avoir été incorrectement installé, configuré, ou utilisé de
quelque façon pas conformément aux instructions fournies avec le produit. Cette garantie ne s'applique pas à une
défaillance du produit à la suite d'un accident, un abus, une négligence, une modification, ou une mauvaise installation,
ou tout autre manquement, non liée à un défaut de matériau ou de fabrication. Cette garantie ne s'applique pas à la
finition d'une partie du produit, comme la surface et / ou l'altération, car cela est considéré usure normale.
Le fabricant ne garantit pas et décline spécifiquement toute garantie, expresse ou implicite, d'adéquation à un usage
particulier, autre que la garantie contenue dans ce document. Le fabricant décline expressément toute responsabilité et
ne peut être tenu responsable de toute perte ou dommage indirect ou accessoire, y compris mais sans s'y limiter, les
coûts du travail / dépenses impliqués dans le remplacement ou la réparation dudit produit.
Contactez l‘équipe du Service à la Clientèle au 1-855-HD-HAMPTON ou visitez www.hamptonbay.com.
Installation 21
Opération 23
Entretien et Nettoyage 23
Entretien Extérieur 23
Entretien Intérieur 23
Dépannage 23
Table des Matières 18
Consignes de Sécurité 18
Garantie 18
Pré-Installation 19
Planification du l’Installation 19
Outils Requis 19
Matériel Inclus 19
Contenu du Paquet 20
Pré-installation
PLANIFICATION DE L'INSTALLATION
Lire toutes les instructions avant assemblage et l'installation. Avant de commencer l'installation du luminaire ou la
dépose d'un précédent luminaire, débrancher l'alimentation en désactivant le disjoncteur ou en retirant le fusible de la
platine de fusibles. Pour éviter d'endommager le produit, assembler sur un doux et non abrasif surface tels que tapis ou
un morceau de carton.
NOTE : Conservez votre reçu et ces
instructions à la preuve d'achat.
OUTILS REQUIS
MATÉRIEL INCLUS
NOTE : Matériel non illustré à taille réelle.
19
Partie Description Quantité
AA Capuchon de Connexion 3
BB Vis de Fixation 2
CC Vis de Montage 2
DD Anneaux de Douille 1
EE Plaque de Fixation 1
FF Support de montage 1
HAMPTONBAY.COM
Veuillez contacter le 1-855-HD-HAMPTON pour obtenir plus aide.
Échelle Lunettes
de
Protection
1 Ampoule du
60W ou LED ou
fluocompactes
équivalent
Ruban
Électriqu
e
Tournevis
Cruciform
e
Tournevis
Tête Plate Coupe-
fil
Pince à
Dénuder
EE
AA CCBB DD FF
Pré-installation (suite)
CONTENU DU PAQUET
20
Partie Description Quantité
A Abat-jour 1
B Corps du Luminaire 1
B
A
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Hampton Bay HB3672-339 Mode d'emploi

Taper
Mode d'emploi