Dorel Home 4155449 Manuel utilisateur

4155449 (Gray Linen), 4331649 (Blue Linen)

4344449 (Gray Velvet), 4345649 (Blue Velvet)

4346149 (Ivory Velvet)

Dateof Purchase

Upholstered Bed with Storage

Lot Number (TAKEN FROM CARTON)

Thank you for purchasing from DHP!

THIS INSTRUCTION BOOKLET CONTAINSIMPORTANT SAFETY

INFORMATION. PLEASE READ AND KEEP FORFUTUREREFERENCE.

1

VN. - 2022/01/24

King

Weight Limit:

Bed: 500 lb /227 kg

Drawer 40 lb / 18 kg

B34415544900 - 36213705

Questions, concerns, missing parts?

CONTACT OUR CUSTOMER SERVICE DEPARTMENT

BEFORE RETURNING PRODUCT TO THE RETAILER.

If parts are missing or damaged, we will gladly ship your

replacementparts free of charge.

Visit www.dhpfurniture.com/eng/replacement-parts

or call Toll-Free 1-800-267-1739.

You can also chat with us at www.dhpfurniture.com

2

1-800-267-1739

MondaytoFriday

Saturday

Sunday

DHP Consumer Services

12345 Albert Hudon, Suite 100,

Montreal,QuebecH1G 3L1

cs@dhpfurniture.com

Read Before BeginningAssembly

●Work in a spacious area and near where the unit will be used, preferably on a

carpet, or use a piece of the cardboard packagingto protectyour floor and product.

●Makesure all parts are included. Most partsare labeledor stamped on theraw

edge.

●Read each step carefully. It is very important that each step of the instructions is

performed in the correct order. If these steps are not followed in sequence,

assemblydifficultieswill occur.

●This product may contain small components.Please ensure that they are kept

away from small children.

●This product is designed for home use and is not intendedfor commercial use.

ContactUs!

For help with assembly, identifying parts, product information or to order parts,

pleasecontact us:

Limited 1 year Warranty

DHP warrants this product to be free from defects in material and workmanship

and agrees to remedy any such defect. This warranty covers one year from the

date of original purchase from authorized retailers. This is solely limited to the

repairor replacementof defectiveparts and assembly labor is not included.

This warranty does not apply to any product which has been improperly

assembled, subjected to misuse or abuse or which has been altered or repaired in

any way.The warranty does not cover wearing, tearing, fading or splitting of the

fabric (whereapplicable). Liability forconsequentialdamagesis excludedto the

extent exclusion is permitted by law. This warranty gives you specific legal rights

and you may also have other rights which vary from state to state or province to

province.

To obtain warranty service, purchaser must present original bill of sale.

Components repaired or replaced are warranted through the remainderof the

original warranty period only. The defective components will be repaired or

replacedwithoutcharge,subjectto the terms and conditions describedabove.

Visit www.dhpfurniture.com to view the limited warranty valid in the U.S. and

Canada.

9 am to9pm (EasternTime)

10 am to 6:30 pm (EasternTime)

11 am to 7pm (EasternTime)

DoNOT use

powertools

Chat

with us! www.dhpfurniture.com

1.5 hour

This product is shipped in 2 cartons

PARTS

3

PARTS LIST

HEADBOARD

X1 PC BACK PANEL

X 1 PC FOTTBOARD

X1 PC SIDE RAIL

X2 PCS CENTER RAIL

X2 PCS

CROSS RAIL

X1 PC SIDE TUBE

X 4 PCS SUPPORT RAIL

X2 PCS SUPPORT LEG

X4 PCS WOODEN SLATS

X39 PCS

4

PART NUMBERS

PART

LABELS 4155449

(Gray Linen) 4331649

(Blue Linen) 4344449

(Gray Velvet) 4345649

(Blue Velvet) 4346149

(Ivory Velvet)

AT1019440 T1019530 T1019550 T1019570 T1019590

A1 T1019450 T1019450 T1019450 T1019450 T1019450

BT1019460 T1019540 T1019560 T1019580 T1019600

ET1019470 T1019470 T1019470 T1019470 T1019470

FT1019480 T1019480 T1019480 T1019480 T1019480

GT1019490 T1019490 T1019490 T1019490 T1019490

HT1019500 T1019500 T1019500 T1019500 T1019500

JT1019510 T1019510 T1019510 T1019510 T1019510

KT1019520 T1019520 T1019520 T1019520 T1019520

P1 T1013900 T1013900 T1013900 T1013900 T1013900

Each part has a unique part number.

Please reference the appropriate part

number when contacting customer

service for replacement parts.

Before throwing any packaging, please

verify all contents and make sure you

have received all the parts listed above!

AA1 EF

J

GP1

HK

B

PARTS LIST

SINGLE SLAT CAP

X26 PCS DOUBLE SLAT CAP

X 26 PCS FRONT PANEL

X4 PCS DRAWER BOTTOM PANEL

X4 PCS DRAWER BACK PANEL

X4 PCS

DRAWER SIDE PANEL

X4 PCS DRAWER SIDE PANEL

X4 PCS CASTER

X 20 PCS

Each part has a unique part number.

Please reference the appropriate part

number when contacting customer

service for replacement parts.

Before throwing any packaging, please

verify all contents and make sure you

have received all the parts listed above!

5

PART NUMBERS

PART

LABELS 4155449

(Gray Linen) 4331649

(Blue Linen) 4344449

(Gray Velvet) 4345649

(Blue Velvet) 4346149

(Ivory Velvet)

XT1013930 T1013930 T1013930 T1013930 T1013930

YT1013940 T1013940 T1013940 T1013940 T1013940

CT1019180 T1019720 T1019750 T1019780 T1019810

LT1019190 T1019190 T1019190 T1019190 T1019190

MT1019200 T1019200 T1019200 T1019200 T1019200

NT1019210 T1019210 T1019210 T1019210 T1019210

ST1019220 T1019220 T1019220 T1019220 T1019220

QT1019230 T1019230 T1019230 T1019230 T1019230

X Y C L M

NS Q

6

Please do not completely tighten all the hardware, until

the entire assembly is complete, unless otherwise

indicated in the step-by-step instructions.

The screw(s), bolt(s) to be used at each step are shown

in actual size in the lower right corner of the page.

Hardware Pack

4155449 (Gray Linen); 4331649 (Blue Linen)

4344449 (Gray Velvet); 4345649 (Blue Velvet)

4346149 (Ivory Velvet) HP # : T4155449-00

HARDWARE LIST

1

BOLT

X 26 PCS BOLT

X 4 PCS WASHER

X 4 PCS BOLT

X 8 PCS ALLEN KEY

X 1 PC

BOLT

X 8 PCS BOLT

X 24 PCS BOLT

X 56 PCS BOLT

X 8 PCS

1/4’’ x 3/4’’ 1/4’’ x 3/4’’ 1/4’’ 1/4’’ x 1 9/16’’ 4 mm

6 7 8 9

54321

3/16’’ x 3/8’’ 3/16’’ x 7/8’’ 3/16 x 1’’ 1/4’’ x 1/2’’

Step 1

Stịck back panel A1 to the back of

Headboard Awith Velcro as Illustrated.

7

Step 2

Attach Guide HX 4 to Headboard Aand

Footboard Bwith bolts ❾.

X 8

8

9

Step 3

Attach support rail J to side rail Ewith

bolts ❶.

Repeat the same procedure for remaining

part Jand E.

9

X 6

1

Step 4

Attach support leg KX 2 to center rail F

with bolts ❶as shown.

Repeat the same procedure for remaining

part KX 2 and F.

10

X 8

1

Step 5

Attach center rails FX 2 to Headboard A

and Footboard Bwith bolts ❶.

Attach side rails EX 2 to Headboard A

and Footboard Bwith bolts .

11

4

X 8

4

1

X 8

Step 6

Attach cross rail Gto support rails Jx 2

with bolts ❶

12

X 4

1

Step 7

7.1 Insert slat P1 into single slat cap X,

7.2 Press single slat cap Xinto side rails

E, repeat the same procedure for the

opposite side of the bed with a new slat

P1 and single slat cap X.

Repeat the same procedures going

backwards for every row of slats.

13

Step 8

8.1 Insert double slat cap Yx 2 onto the

ends of slat P1 assembled in previous step;

8.2 Take a new slat P1 and insert both

ends into the other free end of double slat

cap Yx 2, then press double slat cap Yx 2

SIMULTANEOUSLY into center rails Fx 2

as illustrated.

Repeat the same procedures going

backwards for every row of slats.

14

Step 9

Attach drawer back panel Mto drawer

side panels Sand Nwith bolts .

Don’t completely tighten the bolts until

STEP 12 is completed.

15

7

Make sure that these holes are all located on

the top side before assembling.

For better performance, please orient the

plastic sheet towards inside of the drawer.

X 4

X16

7

Step 10

16

X 8

6

Attach caster Qto drawer bottom panel L

with bolts .

6

Step 11

17

.

11.1 Attach caster QX 4 and drawer

bottom panel Lto drawer side panels S

and Nwith bolts .

11.2 Attach drawer bottom panel Lto drawer

back panel Mwith bolt .

7

8

X32

X 8

7

8

Step 12

18

Attach the sub-assembly L/S/N/M from

previous step to front panel Cwith bolts .

Then, properly tighten all the bolts. 8

X24

8

Step 13

19

Attach bolts and washers as shown.

2 3

X 4

2

X 4

3

Step 14

20

Align Drawers with the bed frame and push

them into the bed.

Lock drawers by slightly lifting drawer and

inserting the Pin into the Slot.

La page charge ...

Dorel Home 4155449 Manuel utilisateur

Ce manuel convient également à

Dorel Home 4155449 Manuel utilisateur

dans d''autres langues