Glacier Bay 67536-1001 Guide d'installation

THANK YOU

INSTALLATION AND CARE GUIDE

We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this kitchen

faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see

our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!

PULL-DOWN KITCHEN FAUCET

Questions, problems, missing parts?

Before returning to the store, call Glacier Bay Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday

9 a.m. - 6 p.m., EST, Saturday

1-855-HD-GLACIER (1-855-434-5224)

HOMEDEPOT.COM

YOW 10/2014REV.01

Model#

SKU#

67536-1001

67536-1008D2

67536-1027H2

682-892

665-466

682-894

2

Table of Contents

Important Information ..............................2

Warranty ...................................................2

Pre-Installation .........................................2

Planning Installation ..............................2

Package Contents ..................................3

Installation ................................................4

Operation ..................................................12

Troubleshooting ......................................14

Care and Cleaning

...................................

13

Service Parts

...........................................

16

Adjustable

wrench

Safety

goggles

Phillips

screwdriver

SILICONE

Silicone

sealant

6mm

diameter

Electric

drill

Tools and Hardware Required ...............2

Important Information

□ Observe all local plumbing and building codes.

□ Cover the sink drain to avoid losing any parts.

□ Review the care and cleaning section included in this guide.

Warranty

LIMITED LIFETIME WARRANTY

Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our

limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of

defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective.

Sensor mechanism and LED light excluded from Limited Lifetime Warranty and are covered by a 3-year warranty

from date of purchase. Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD-

GLACIER (1-855-434-5224) to receive the replacement item. Proof of purchase (original sales receipt) from the

original consumer purchaser must be made available for all Glacier Bay warranty claims.

This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and

tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended

a ve year limited warranty from the date of purchase, with all other terms of this warranty applying except the

duration of warranty.

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other

rights that vary from state to state and province to province. Please see a store or contact 1-855-HD-GLACIER for

more details.

Pre-Installation

PLANNING INSTALLATION

Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package

Contents list. If any part is missing or damaged, do not attempt to install the product. Contact customer service

for replacement parts

TOOLS AND HARDWARE REQUIRED

Channel

lock pliers

3

Pre-Installation (continued)

PACKAGE CONTENTS

Part Description Quantity

A 1Faucet body

B 1

C Metal washer 1

Rubber washer

D 1

E Protective cap 1

Nut

H 2

IGasket 1

Bolt

FWrench 1

G Escutcheon 1

LWeight clip 1

JMounting nut 2

K 1Hose & Sprayhead

Part Description Quantity

MWeight 1

NQuick connect

assembly 1

O 1

P Battery pack 1

Sensor control box

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

R 1

SSoap assembly 1

Soap pump

T 1

USoap bottle 1

Soap dispenser

mounting nut

Q"AA" Battery 4

P

A

L

M

B

C

D

E

F

J

I

H

G

K

R

S

T

U

Sensor Control Box

Soap Pump Assembly

Q

N

O

4

Installation

1 Installing the faucet assembly

□Install the faucet body (A)-including supply

hoses and sensor cable (1)-through the hole

in the sink.

CAUTION: Always turn off the water supply before

removing an existing faucet or replacing any part of a

faucet. Open the faucet handle to relieve water pressure

and ensure that the water is completely shut off.

NOTE: This step is for no escutcheon installation (optional).

If the escutcheon will be used, install the faucet assembly

as described in step 2.

2Installing the escutcheon

□Screw the bolts (H) into the escutcheon (G) and

ensure that the gasket (I) is pressed onto the

escutcheon (G) before the escutcheon (G) is

installed over the three holes in the sink.

□Secure the escutcheon (G) to the sink using the

mounting nuts (J) provided. Hand tighten only.

NOTE: If the sink is uneven, use silicone under the

gasket (I).

NOTE: This step is for escutcheon installation (optional).

If the escutcheon will not be used, install the faucet

assembly as described in step 1.

□Shut off the water supply. Remove the old

faucet.

□Clean the mounting surface.

□Proceed to step 4.

A

1

G

H

I

J

5

Installation (continued)

3 Installing the faucet assembly

□Install the faucet body (A)-including supply

hoses and sensor cable (1)-through the hole

in the escutcheon (G).

NOTE: This step is for escutcheon installation (optional).

If the escutcheon will not be used, install the faucet

assembly as described in step 1.

4 Securing the faucet assembly

□Install the rubber washer (B) and metal washer (C)

onto the threaded shank.

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

□Thread the mounting nut (D) onto the shank using

the wrench (F) provided to tighten rmly.

G

A

1D

C

B

D

1

3

F

D

F

4

2

6

Installation (continued)

5 Installing the protective cap

□Screw the protective cap (E) onto the threaded

mounting shank (1).

6

Installing the pulldown hose

□Before installing the hose (K), ensure that the

protective cap (1) is on the end of the hose (K).

□Insert the small end of the pulldown hose (K) into

the spout (2) and feed through faucet body (A)

and the threaded mounting shank (3) in the

direction shown below.

7 Attaching the quick connector

to the hose

□Before installing the quick connector, remove

and discard the protective cap (1) from the

pulldown hose (K).

□Attach the quick connector (N) by screwing it

onto the threaded end of the hose (K) in a

clockwise motion. Hand tighten only.

K

1

K

1

2

N

1

E

1

E

1

2

1

A

2

3

K

7

Installation (continued)

8

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Attaching the quick connector

to the receiving block

NOTE: The side of the control box (O) with "in" and "out"

showing must face the front of the cabinet (away from the

back of the cabinet).

□Connect the hose with the yellow tag to the hose

on the control box (O) with a matching yellow tag.

Push rmly together until they snap into place.

NOTE: If you want to use the faucet without the sensor

feature or without power, you can attach the quick

connector (1) to the receiving block (2). This bypasses the

sensor feature and enables the faucet to work by operating

the handle.

□Connect the hose with the green tag to the hose

on the control box with a matching green tag.

Push rmly together until they snap into place.

9Installing the sensor cable

□Install the data cable (1) to the control box connection (2). Ensure the arrows on the data cable (3) and the

control box connection (4) are aligned to one another to ensure proper installation. Ensure they are tightly

connected by rmly pushing together.

□Secure the connection by hand tightening the nut (5) in a clockwise direction onto the threaded sensor cable.

CAUTION: If the connections are not made properly, the

sensor feature will not work.

O

2

1

Yellow

Green

5

1

2

3

4

2

8

Installation (continued)

10Installing the batteries

□Squeeze the side indicated by the arrows (5) below on the battery pack (P) and then pull down to remove

the cover (1). See g 1.

□Install the four AA batteries (Q) included by matching the positive (+) and Negative (-) ends on the battery (Q)

to the (+) and (-) markings in the battery pack (P). The negative ends of the battery (Q) should always

connect to the spring end of the battery slots in the battery pack (P). See g 2.

□Reinstall the battery pack cover (1) by pushing up and snapping into place. See gure 3.

NOTE: When the sensor ashes 10 times continuously

and slowly, the batteries have lost their charge. Replace

the batteries (Q).

NOTE: This step is for batteries installation (optional). If the

batteries will not be used, install as described in step 12.

Figure 1 Figure 2 Figure 3

P

(+)

(-)

P

1

5

5(-)

1

(+)

(-)

Q

P

Q

9

Installation (continued)

11Installation using the battery

pack

□There are 2 options to secure the battery pack (P) under the counter: Tape Installation or Screw Installation.

□Screw Installation: Drill holes in the wall using a 6mm (15/64”) diamater drill bit. Install the battery pack

seat (1) using the molly anchors (3) and screws (4) provided.

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

□Tape Installation: Attach one side of the double sided tape (2) to the battery pack seat (1). Firmly attach the

battery pack seat (1) to the cabinet wall. Place the battery pack (P) into the battery pack seat (1).

NOTE: This step is for battery installation (optional). If the

battery will not be used, install as described in step 12. Before

installation, select the location for the battery pack (P) and

verify that the battery pack wire will reach the connection on

the bottom of the control box (O).

□Insert the battery pack cable (5) into the control box connection (6). Ensure the arrows on the data cable (7)

and the control box connection (8) are aligned to one another to ensure proper installation.

Screw Installation

1

(15/16") dia.

P

1

43

6mm

2

1

6

5

O

8

7

Tape Installation

2

1

P

1

2

3

OR

CAUTION: If the connections are not made properly, the

sensor feature will not work.

Installation (continued)

10

12Installation using the AC

adapter (not included)

NOTE: This step is for installation without batteries using

an AC adapter (not included). If using the batteries, install

as instructed in step 10 and skip to step 13. The AC adapter

is not included with the product, but can be purchased from

Homedepot.com.

□Install the AC adapter (5) into the power outlet.

□Insert the AC adapter cable (1) into the control box port (2). Ensure the arrows on the data cable (3) and the

control box connection (4) are aligned to one another to ensure proper installation.

5

2

1

4

3

CAUTION: If the connections are not made properly, the

sensor feature will not work.

11

Installation (continued)

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Push

up

Screw

T

Sink Sink

Fig 1

14 Installing the soap dispenser

□Insert the soap assembly (S) through the

selected hole in the sink. Secure the soap

assembly to the sink with the soap

dispenser mounting nut (T) provided. Push

up the soap dispenser mounting nut (T) to

sink and hand-turn to tighten, as shown in

the Fig 1.

□From under the sink, screw the soap bottle (U)

onto the soap assembly (S) shank. Insert the

soap pump (R) down into the soap assembly (S).

13Installing the weight

□Install the weight clip (L) at the point of the hose (K) marking “weight here”.

□Insert the weight (M) onto the clip (L) by sliding it down onto the clip (L).

Weight

here

M

L

K

Weights

here

R

S

T

U

1

4

2

3

12

1Flushing and checking for leaks

□Pull the hose assembly out of the spout and

remove the spray head by unscrewing it from

the hose in a counterclockwise direction. Be

sure to hold the end of the hose down into the

sink and turn the faucet to the warm position

where it mixes hot and cold water.

□Flush the water lines for one minute. This ushes

away any debris that could cause damage to

internal parts. Check for leaks.

□Re-tighten any connections if necessary, but do

not overtighten. Reinstall the spray head by hand

tightening it back onto the spray hose in a

clockwise direction.

Operation

IMPORTANT: After installation is completed, turn on the

hot and cold water supplies. Check for leaks. Do not lose

the gasket (1) in the hose.

15 Making the water supply

connections

□Thread the nut (1) on the supply line onto the

outlet of the water supply valve (2) and tighten

with a wrench. Do not overtighten.

Installation (continued)

NOTE: The hot side inlet tube is indicated by a label. Avoid

twisting wires together or placing the wires close to each

other and damaging.

1

2

1

HC

13

Operation (continued)

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Care and Cleaning

□To clean, wipe down with a damp cloth and towel dry

□Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will

be voided.

3Removing the quick connector

□If it is necessary to remove the quick connector

(1), squeeze the tabs (2) on the quick connector

and then pull down to disconnect.

2Operating the sensor

□Turn the handle (1) to the full on position, activating

the sensor (2) and turning the water on.

□To turn the water off, move your hand within the

sensor range (8in. MAX) as shown.

NOTE: The sensor is active only when the handle is in the

ON position.

NOTE: As a water saving feature, the water will turn off

automatically after 3 minutes of continuous ow.

min.

45

30

0

15

3

8 in. MAX

2

1

□To turn the water on, move your hand within the

sensor range again (8in. MAX range) as shown.

□Leave the handle (1) in the ON position, and you

can start and stop the ow of water simply with

a wave of your hand.

Squeeze

2

Pull

down

11

14

Troubleshooting

1Water will not shut off when

turning the handle to the OFF

position

□When you turn the handle to the full on position,

the water will turn on

□But when you turn the handle to the full off

position, the water does not turn off.

□This indicates that the cartridge is damaged.

Turn off the water supply, remove the handle

and replace the cartridge (1).

1

2The light on the sensor is

flashing continuously

□If the handle is closed, turn the handle to the

on position and move your hand in the sensor

area. If the sensor ashes 10 times continuously

and slowly, then replace the 4 "AA" batteries.

1

Replace the batteries

Flash 10 times

continuously

and slowly

15

Troubleshooting (continued)

4There is a low flow of water or

LED indicator in the spray head

is not functioning

□This could indicate that the washer in the "in" end of

the control box is dirty or damaged. Remove the

hose and unscrew the connector. Take out the

washer from the control box. Clear the washer

or replace the washer. Reassemble the connector

and hose.

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

3The sensor is not activating

the water flow

□When you turn the handle to the full on position,

the water will turn on.

□However, when you move your hand in front

of the sensor, the water does not turn off as

it should.

□This indicates that the control box is damaged.

Call Glacier Bay customer service to request

a replacement control box. Replace the old

control box with the new control box.

1

Hose

Connector

Control

box

Washer

16

Service Parts

Part Description Part Number

1 RP38223*

2 Wearable ring RP70380

3 O-ring RP60071

5Bonnet nut RP70394

6 Cap RP80028*

7 Handle RP13368*

9 Index & O-ring RP80440*

11 Metal washer RP64088

Spray head and Hose

15 O-ring RP60002

23 Mounting nut RP56036

24 Sensor control box RP70451

25 Battery pack RP70452

26 Pump kit RP46022

Part Description Part Number

12 Nut RP56098

13 Protective cap RP70448

16 Quick connect

assembly RP70482

17 O-ring RP60089

18 Weight clip RP64204

19 Weight RP70441

20 Escutcheon RP80441*

21 Bolt RP50071

22 RP80442

Gasket

4 Cartridge RP20005

8 Screw RP50015

10 Rubber washer RP64087

14 Block RP70421

27 Flange kit RP46066*

28 Soap bottle RP46060

29 Soap dispenser kit RP46065*

*Specify Finish

Many replacement cartridges, aerators, and drain

assemblies can be purchased at your local The

Home Depot store or online at HOMEDEPOT.COM

Faucet ID tags can

be found on the

hot water inlet 25

2

13

4567

89

20

21

22

23

10

11

12

13

14

15

17

18

19

26

27

28

29

16 24

Questions, problems, missing parts?

Before returning to the store, call Glacier Bay Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday

9 a.m. - 6 p.m., EST, Saturday

1-855-HD-GLACIER (1-855-434-5224)

HOMEDEPOT.COM

Retain this manual for future use.

GRACIAS

GUÍA DE USO Y MANTENIMIENTO

¿Problemas, preguntas o piezas faltantes?

Antes de regresar a la tienda, llama al servicio al cliente de

Glacier Bay de lunes a viernes entre 8 a.m. y 7 p.m. y los

sábados entre 9 a.m. y 6 p.m.(hora estándar del Este)

1-855-HD-GLACIER (1-855-434-5224)

HOMEDEPOT.COM

Modelo núm.

67536-1001

67536-1008D2

67536-1027H2

GRIFO RETRÁCTIL PARA COCINA

Agradecemos la con anza que has depositado en Glacier Bay al comprar este grifo para cocina. Nos esforzamos

por crear continuamente productos de calidad diseñados para mejorar tu hogar. Visítanos en Internet para ver

nuestra línea completa de productos disponibles para las necesidades de mejoras de tu hogar. ¡Gracias por

elegir a Glacier Bay!

SKU núm.

682-892

665-466

682-894

Llave

ajustable

Gafas de

seguridad

Destornillador

Phillips

SILICONE

Sellador de

silicona

Taladro

eléctrico de

6 mm de

diámetro

Pinzas

ajustables

19

Información importante

□ Cumple con todos los códigos locales de construcción y de plomería.

□ Cubre el drenaje del lavabo para evitar que se pierda alguna pieza.

□ Consulta la sección de mantenimiento y limpieza incluida en esta guía.

HERRAMIENTAS Y HERRAJES NECESARIOS

Tabla de contenido

Información importante .........................19

Garantía...................................................19

Pre-instalación .......................................19

.............19

Herramientas y herrajes necesarios ....19

Contenido del paquete .........................20

Instalación ..............................................21

Funcionamiento ......................................29

Cuidado y limpieza ................................30

Piezas de repuesto ................................33

Planicación de la instalación Solución de problemas ...........................31

Garantía

GARANTÍA LIMITADA DE POR VIDA

Los productos de Glacier Bay están fabricados con normas y mano de obra de calidad superior y están respaldados

por nuestra garantía de por vida limitada. Glacier Bay garantiza al comprador consumidor original que sus productos

no presentan defectos materiales o de fabricación. El mecanismo del sensor y las luces LED están excluidos de la

garantía limitada de por vida y están cubiertos por una garantía de 3 años desde el momento de la compra.

Simplemente, devuelva el producto o pieza a cualquiera de las tiendas minoristas de The Home Depot o llame al

1-855-HD-GLACIER (1-855-434-5224) para recibir el artículo de reemplazo. El comprobante de compra (recibo de venta

original) del comprador consumidor original debe estar disponible para todos los reclamos de garantía de Glacier Bay.

Esta garantía excluye daños y fallos incidentales/consecuenciales debido al mal uso, abuso o desgaste normal por

el uso. Esta garantía excluye todos los usos industriales, comerciales y de negocios, a cuyos compradores se les

extiende en la presente una garantía limitada de cinco años a partir de la fecha de compra, con todos los otros

artículos de esta garantía que aplican excepto la duración de la garantía.

Algunos estados y provincias no permiten la exclusión o la limitación de los daños incidentales o consecuentes,

por lo tanto, las limitaciones y exclusiones anteriores podrían no aplicarse a su caso. Esta garantía le otorga derechos

tienda o llame al 1-855-HD-GLACIER para obtener más detalles.

Pre-instalación

PLANIFICACIÓN DE LA INSTALACIÓN

Antes de comenzar la instalación de este producto, asegúrate de que no falta ninguna pieza. Compara las piezas

con la lista de Contenido del paquete. Si falta alguna pieza o está dañada, no intentes instalar el producto.

Comunícate con el servicio al cliente para piezas de repuesto.

Pieza Descripción Cantidad

A 1Cuerpo del grifo

B 1

C Arandela metálica 1

Arandela de goma

D 1

E Tapa protectora 1

Tuerca

H 2

IJunta 1

Perno

FLlave 1

G Placa protectora 1

LSujetador con peso 1

JTuerca de montaje 2

K 1

Manguera y

cabezal rociador

Pieza Descripción Cantidad

MPeso 1

NEnsamblaje del

conector rápido 1

O 1

P Paquete de baterías 1

Caja de control

del sensor

R 1

SEnsamblaje para

jabón 1

Bomba para jabón

T 1

UBotella de jabón 1

Tuerca de montaje

para el dispensador

de jabón

Caja de control

del sensor Ensamblaje de la

bomba para jabón

QBatería “AA” 4

20

Pre-instalación (continuación)

CONTENIDO DEL PAQUETE

HOMEDEPOT.COM

Para obtener asistencia, llama al 1-855-HD-GLACIER.

P

A

L

M

B

C

D

E

F

J

I

H

G

K

R

S

T

U

Q

N

O

La page charge ...

Glacier Bay 67536-1001 Guide d'installation

Glacier Bay 67536-1001 Guide d'installation

dans d''autres langues