Dell W-7205 Guide de démarrage rapide

Marque: Dell

Modèle: W-7205

Catégorie: Modules de commutation réseau

Taper: Guide de démarrage rapide

Dell Networking

W-7205 Controller

Installation Guide

Dell Networking W-7205 Controller | Installation Guide 0511659-03 | April 2015

, Aruba

Wireless Networks

, the registered Aruba the Mobile Edge Company logo, and Aruba Mobility Management

System

. Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc.

Originated in the USA. All other trademarks are the property of their respective owners.

Open Source Code

Certain Aruba products include Open Source software code developed by third parties, including software code

subject to the GNU General Public License (GPL), GNU Lesser General Public License (LGPL), or other Open

used can be found at this site:

http://www.arubanetworks.com/open_source

Legal Notice

The use of Aruba Networks, Inc. switching platforms and software, by all individuals or corporations, to terminate

other vendors’ VPN client devices constitutes complete acceptance of liability by that individual or corporation for

this action and indemnifies, in full, Aruba Networks, Inc. from any and all legal actions that might be taken against it

with respect to infringement of copyright on behalf of those vendors.

Dell Networking W-7205 Controller | Installation Guide Contents| 3

Contents

Preface

Guide Overview

Related Documentation

Refer to the latest

Dell Networking W-Series ArubaOS User Guide

and

Dell Networking W-Series ArubaOS CLI

Reference Guide

for complete management of the controller.

Contacting Dell

Web Site Support

Mai n Website dell.com

Contact Information dell.com/contactdell

Support Websi te dell.com/support

Documentation Website dell.com/support/manuals

Table 1: Contact Information

Dell Networking W-7205 Controller | Installation Guide W- 7205 Controller| 9

Chapter 1

W-7205 Controller

The W-7205 Controller is a wireless LAN controller that connects, controls, and intelligently integrates wireless

Access Points (APs) and Air Monitors (AMs) into a wired LAN system.

There are two models of the W-7205 controller that do not differ physically or functionally from each other.

l W-7205-US: For the United States of America

l W-7205-RW: For the rest of the world

The W-7205 controller has the following port specification:

Model Ports

Number of APs

Supported

Number of Users

Supported

W- 7205 l 4 x dual-media (10/100/1000BASE-T and 1000BASE-X)

l 2 x 10GBASE-X

256 8192

Table 2: W-7205 Controller Port Specification

NOTE: The W-7205 controller requi res Dell Networking W-Series ArubaOS 6.4.3.1 or later version.

Packaging Checklist

NOTE: Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including the original

packing m ateri als. Use these materials to repack and return the unit to the supplier, if needed.

Item Quantity

W- 7205 Controller 1

Standard Mounting Brackets 2

M6 x 15 mm Phillips Pan Head Screws 4

M4 x 8 mm Phillips Flat Head Screws

M6 x 7 mm Grounding Screws 2

M6 Cage Nut 4

M6 Clip Nut 4

AC Power Cord Retaining Clip 1

Table 3: Package Contents

10 | W-7205 Controller Dell Networking W-7205 Controller | Installation Guide

Item Quantity

Power Cable 1

Mi cro- USB Cable 1

Rubber Feet 4

Installation Guide (this document, printed) 1

Quick Start Guide (Printed) 1

Dell Safety, Environment, and Regulatory Information (printed) 1

Dell War ranty and Support Information (printed) 1

Dell Software License Agreement (printed) 1

Table 3: Package Contents

NOTE: Optional accessories are available for use with the Dell W -7205 controller and are sold separately. Contact your Dell sales

representative for details and assistance.

W-7205 Components

This section introduces the different components of the W-7205 controller, and specifies their locations in the

controller. Figure 1 shows the front panel of the W-7205 controller and Figure 2 shows the back panel of the W-

7205 controller.

Figure 1 Front Panel of the W-7205 Controller

Figure 2 Back Panel of the W-7205 Controller

The following table lists the different components of the W-7205 controller:

Component Description

Page

Dual-Media ports 4 x dual-media (10/100/1000BASE-T and 1000BASE-X) ports

10GBASE-X ports 2 x 10GBASE-X ports

USB interface All ows upl oading configuration and image from a USB 2.0 storage device.

Serial consol e port RJ-45 serial console access port for direct local management

Mi cro- USB console port Mi cro- USB console access port for direct local management

Managem ent port All ows connection to a separate management network

Power, Status, and Peered LED Provi des basic m onitori ng of the controller

LCD All ows configuration of LCD behavior and other basic operations

Enter button All ows execution of actions on the LCD Screen

Menu button All ows selection of the LCD screen menu

CPU Module CPU module

Power and Status LEDs on the CPU

m odule

Provi des basic m onitori ng of the CPU module

USB Interface on the CPU module Serves the same purpose as the USB interface on the front panel

AC in AC power connector

Grounding poi nts Provided for attaching the grounding

Table 4: W-7205 Controller Components

Dual-Media Ports

The W-7205 controller is equipped with four sets of dual-media ports (ports 0 through 3). These ports can utilize

either a 1000BASE-X or 10/100/1000BASE-T connection provided. However, the 1000BASE-X fiber connection has

priority over the 10/100/1000BASE-T copper connection. If a link is detected on the 1000BASE-X interface, the

10/100/1000BASE-T connection will be disabled.

10/100/1000BASE-T (RJ-45) Ports

The W-7205 controller is equipped with four 10/100/1000BASE-T copper ports, as a part of dual-media ports.

Gigabit Ethernet uses all eight wires and each pair is used in a bi-directional fashion, meaning the same pairs are

used for both data transmission and reception. Figure 3 illustrates the CAT-5 pin-out on an RJ-45 connector. The

CAT-5 pin-out pairs the following pins on a 10/100/1000BASE-T Gigabit Ethernet port: 1/2, 3/ 6, 4/5, and 7/8.

Dell Networking W-7205 Controller | Installation Guide W-7205 Controller| 11

12 | W-7205 Controller Dell Networking W-7205 Controller | Installation Guide

Figure 3 10/100/1000BASE-T Port Pin Out

1000BASE-X (SFP) Ports

The W-7205 controller is equipped with four 1000BASE-X dual-media ports for fiber connectivity only and are

intended for use with SFPs (mini-GBICs).

Dual-Media Port LEDs

Each port is equipped with two LEDs that allow basic monitoring of status, activity, and configuration of the port.

l LINK/ACT— Placed above the port to the left, this LED displays the link status and activity of the port.

l STATUS— Placed above the port to the right, this LED displays the status of the port. The information

displayed by this LED changes based on the LCD mode. The LED behavior corresponding to each LCD mode

is listed in Table 5 and Table 6.

LED Function LCD Mode Indicator Status

LINK/ACT Link status Link status Green (Solid) Link established

Green (Blinking) Port is transmitting or receiving data

Off No link

STATUS Port status Admi nistrative Green (Solid) Port enabled

Off Port administratively disabled

Duplex Green (Solid) Full - duplex

Off Half-duplex

Speed Green (Solid) 1000 Mbps

Off 10/100 Mbps

Table 5: 10/100/1000BASE-T Port LEDs

LED Function LCD Mode Indicator Status

LINK/ACT Link status Link status Green (Solid) Link established

Green (Blinking) Port is transmitting or receiving data

Off No link

Table 6: 1000BASE-X Port LEDs

LED Function LCD Mode Indicator Status

STATUS Port status Admi nistrative Green (Solid) Port enabled

Off Port administratively disabled

Duplex Green (Solid) Full - duplex

Off NA

Speed Green (Solid) 1 Gbps

Off NA

Table 6: 1000BASE-X Port LEDs

10GBASE-X Ports

The W-7205 controller is equipped with two 10GBASE-X (SFP+) ports (4 and 5). These ports are intended for use

with SFP/SFP+ and support dual-speed (1GbE or 10GbE) operation.

Figure 4 10GBASE-X Ports and LEDs

Each port is equipped two LEDs that allow basic monitoring of status, activity, and configuration of the port.

l LINK/ACT— Placed to the top left of the port, this LED displays the link status and activity of the port.

l STATUS— Placed to the top right of the port, this LED displays the status of the port. The information

displayed by this LED changes based on the LCD mode. The LED behavior corresponding to each LCD mode

is listed in Table 7.

LED Function LCD Mode Indicator Status

LINK/ACT Link status NA Green (Solid) Link established

Green (Blinking) Port is transmitting or receiving data

Off No link

Table 7: 10GBASE-X Port LEDs

Dell Networking W-7205 Controller | Installation Guide W-7205 Controller| 13

14 | W-7205 Controller Dell Networking W-7205 Controller | Installation Guide

LED Function LCD Mode Indicator Status

STATUS Port status Administrative Green (Solid) Port enabled

Off Port administratively disabled

Duplex Green (Solid) Full-duplex

Off NA

Speed Green (Solid) 10 Gbps

Off 1 Gbps

Table 7: 10GBASE-X Port LEDs

SFP/SFP+ Modules and DAC Cables

SFP/SFP+ modules (purchased separately), also known as mini-GBICs are hot-swappable, provide optical or copper

connections to other devices.

Direct attach cables (DACs) are installed in a 10GBASE-X port in the same manner as an SFP/SFP+ module.

For the list of Dell approved SFP/SFP+ modules and DAC cables for controllers, see Table 8 and Table 9.

NOTE: Other non-approved third-party optics or DAC cables ar e not tested or supported by Del l on controllers; therefore, Dell does not

guarantee their proper functionality when used with Dell controllers.

NOTE: SFP/SFP+ Modules and DAC cables are sol d separately. C ontact your Dell sales representative for details and assistance.

For information on how to install an SFP/SFP+ module or a DAC cable, see "Installing an SFP/SFP+ Module" on

page 28.

SFP/SFP+ Description

SFP-SX SFP, 1000BASE-SX, LC Connector; 850nm pluggable GbE optic; up to 300 meters over multi-mode fiber (Type

OM2).

SFP-LX SFP, 1000BASE-LX, LC Connector; 310nm pluggable GbE optic; up to 10,000 meters over single-mode fiber.

SFP-TX SFP, 1000BASE-T SFP; copper GbE pluggable; RJ45 connector; up to 100 meters over Category-5, 5e, 6 and 6a

unshiel ded twisted pair cable.

NOTE: Supported only in ports 4 and 5.

SFP-EX 1000BASE-ZX SFP; 1310nm pluggable GbE optic; LC connector; up to 40,000 meters over single-mode fiber

SFP-ZX 1000BASE-ZX SFP; 1310nm pluggable GbE optic; LC connector; up to 70,000 meters over single-mode fiber

SFP-10G-SR SFP+, 10GBASE-SR, 850nm serial pluggable S FP+ optic, target range 300m over MMF, LC Connector.

SFP-10G-LR SFP+, 10GBASE-LR, 1310nm serial pluggable SFP+ optic for up to 10km over SM F, LC Connector

SFP-10G-LRM SFP+, 10GBASE-LRM, 1310nm serial pluggable SFP+ optic, long-reach multimode, LC Connector

Table 8: Supported SFP/SFP+ Modules

SFP/SFP+ Description

SFP-10G-ER SFP+, 10GBASE-ER, 1310nm pl uggable 10GE optic; up to 40,000 meters over single-mode fiber, LC connector

SFP-10G-ZR SFP+, 10GBASE-ZR, 1310nm pl uggable 10GE optic; up to 70,000 meters over single-mode fiber, LC connector

Table 8: Supported SFP/SFP+ Modules

DAC Description

DAC-SFP-10GE-50CM 50cm Direct Attach Cable; 10G SFP+

DAC-SFP-10GE-1M 1m Direct Attach Cable; 10G SFP+

DAC-SFP-10GE-3M 3m Direct Attach Cable; 10G SFP+

DAC-SFP-10GE-5M 5m Direct Attach Cable; 10G SFP+

DAC-SFP-10GE-7M 7m Direct Attach Cable; 10G SFP+

Table 9: Supported DAC Cables

USB Interface

The W-7205 controller is equipped with two USB 2.0 interfaces; one on the front panel of the controller and the

other on the CPU module in the back panel of the controller. A USB storage device can be used to save

configurations, upload configurations, and upgrade image to the controller. USB functions are controlled through the

LCD panel on the front of the controller. For more information on the LCD panel and its functions, see "LCD

Panel" on page 17.

Serial Console Port

For direct local management of the controller, use the serial console port located on the front (see Figure 5). This

port is an RJ-45 female connector that accepts an RS-232 serial cable with a male connector.

Figure 5 Serial Console Port Pin-Out

Serial

Console Port

TxD

GND

RxD

RJ-45 Female

Pin-Out

Direction

Input

Output

GND

The communication settings for the console port are shown in the following table:

Baud Rate Data Bits Parity Stop Bits Flow Control

9600 8 None 1 None

Table 10: Console Terminal Settings

Dell Networking W-7205 Controller | Installation Guide W-7205 Controller| 15

16 | W-7205 Controller Dell Networking W-7205 Controller | Installation Guide

CAUTION: The Console port is compatible only with RS-232 devices. Non-RS-232 devices, such as APs, are not supported.

CAUTION: Do not connect the Console port to an Ethernet switch or a PoE power source. This may damage the controller.

ATTENTION: Le port CONSOLE est compatible uniquement avec les périphériques RS-232. Les périphériques qui ne sont pas de type

RS-232, notamment les points d’accès, ne sont pas pris en charge.

ATTENTION: Ne connectez pas le port Console sur un commutateur Ethernet ou une source d’alimentation PoE. Sinon, vous risquez

d’endommager le contrôleur.

Serial Console Port Adapter

A modular adapter can be used to convert the female RJ-45 connector on the front (see Figure 5) to a male DB9

connector. See Figure 6 for details.

Figure 6 RJ-45 (Female) to DB9 (Male) Modular Adapter Conversion

6 3

RJ-45 DB-9

Internal

Connections

TxD

GND

RxD

TxD

GND

RxD

RJ-45 Female

Pin-Out

DB-9 Male

Pin-Out

TxD

RxD

Ground

Micro-USB Console Port

The W-7205 controller is equipped with one Micro-USB (type B) connector on the front (see Figure 4) that

provides console access for direct local management. If both Micro-USB and RJ-45 Console ports are connected, the

Micro-USB connection takes precedence over the RJ-45 Console connection.

Micro-USB Driver

To use the Micro-USB console port, install the Micro-USB driver on the system that will manage the controller. The

driver is available for download on download.dell-pcw.com under Tools & Resources .

Management Port

The W-7205 controller is equipped with a 10/100/1000BASE-T Gigabit Management (RJ-45) port on the front (see

Figure 4). The management port provides 10/100/1000 Mbps Ethernet access to the controller CLI, SNMP, and

Web interface for complete system management and troubleshooting. It can also be used to connect to a separate

management network. The management port has a LINK/ACT LED on its top left and SPEED LED on its top

right. During operation, these LEDs provide the status information as shown in the following table:

LED Function Indicator Status

LINK/ACT Link Status Green (Solid) Link established

Green (Blinking) Link activity

Off No link on port

SPEED Interface Speed Green (Solid) 1000 Mbps

Off 10/100 Mbps

Table 11: 10/100/1000BASE-T (RJ-45) Management Port

Power, Status, and Peered LEDs

The front panel of the controller also includes Power, Status, and Peered LEDs (see Figure 4) that provide basic

monitoring of the overall status of the controller. The following table describes the different behavior of these LEDs:

LED Function Indicator Status

Power System Power Green (Solid) Power On

Off Power Off

Status System Status Green (Solid) Operational

Green (Blinking) Devi ce is l oading software

Amber (Blinking) Maj or alar m

Amber (Sol id) Critical alarm

Off No power

Peered Reserved for future use NA NA

Table 12: Power, Status, and Peered LEDs

LCD Panel

The W-7205 controller is equipped with an LCD panel that displays information about the controller’s status, and

provides a menu that allows basic operations, such as initial setup and reboot. The LCD panel displays two lines of

text with a maximum of 16 characters per line. When using the LCD panel, the active line is indicated by an arrow

next to the first letter. The LCD panel is operated using the two navigation buttons to the right of the screen. See

Figure 4.

l Menu— Allows navigation through the menus of the LCD panel

l Enter— Confirms and executes the action currently displayed on the LCD panel

LCD Menu

The LCD menu includes four modes as shown in the following table:

LCD Mode Function Displayed Status/ Command Description

Boot Displays boot status of the controller Booting ArubaOS... Boot status of the controller.

LED Displays the mode of the STATUS

LED of ports.

The LED mode menu allows to

choose what information is

com municated by the STATUS LEDs

on each port. See Table 5 for

descriptions of the LED behavior of

each m ode.

LED mode: ADM Admi nistrative– Displays

w hether the port is

adm inistratively enabled or

di sabled

LED mode: DPX Duplex– Displays the duplex

m ode of the port

LED mode: SPD Speed– Displ ays the speed of

the port.

Table 13: LCD Panel Mode

Dell Networking W-7205 Controller | Installation Guide W-7205 Controller| 17

18 | W-7205 Controller Dell Networking W-7205 Controller | Installation Guide

LCD Mode Function Displayed Status/ Command Description

Exit Exit LED menu

Status Displays the ArubaOS version. OS Versi on ArubaOS version

Exit Exit Status menu

Mai ntenance All ows execution of some basic

operations such as uploading an

i mage or rebooting the controller

Upgrade Image [Partition 0 [Y|N] |

Partition 1 [Y|N]]

Upgrade the controller image on

the selected partition from a

predefined l ocation on an

attached USB flash device

Upload config [Y|N] Upload the controller’s current

configuration to a predefined

l ocation on the attached USB

flash device

Factory Default [Y|N] Reset the controller to factory

default settings

Medi a Eject [Y|N] Complete reading or writing to

the attached USB device

Reload system [Y|N] Reload controller

Halt system [Y|N] Halt controller

Exit Exit Maintenance menu

Table 13: LCD Panel Mode

Disabling the LCD Screen

By default, the LCD screen is enabled. However, if the W-7205 controller is deployed in a location without physical

security, the LCD screen can be disabled through the CLI. When disabled, pushing one of the navigation buttons

will only illuminate the LCD screen and display the slot, role, device name, and any alarms.

Additionally, it is possible to disable only the maintenance menu. This allows to change the LED behavior and view

the device status but prevent upgrades and configuration changes.

To disable the LCD screen, enter the Enable mode and use the following CLI commands:

(host) #configure terminal

(host) (config) #lcd-menu

(host) (lcd-menu) #disable menu

To disable only the Maintenance menu or one of its sub-menus, enter the Enable mode and use the following CLI

commands:

(host) #configure terminal

(host) (config) #lcd

(host) (lcd-menu) #disable menu maintenance ?

factory-default

halt-system

media-eject

reload-system

upgrade-image

upload-config

(host) (lcd-menu) #disable menu maintenance upgrade-image ?

partition0

partition1

CPU Module

The W-7205 controller is equipped with a pre-installed CPU module on the back panel of the controller.

NOTE: Do not remove the CPU module unless directed by an authorized Dell technician. The CPU module is not hot-swappable.

For LED behavior on the CPU module, see Table 14.

LED Function Indicator Status

Power CPU Power Green (Solid) Module power On

Off Power Off

Status CPU Status Green (Solid) Module operational

Green (Blinking) Device is loading software

Off No power

Table 14: Power and Status LEDs on the CPU Module

Power Supply

The W-7205 controller is equipped with an integrated AC power supply of 180W.

Grounding Point

To meet safety and electromagnetic interference (EMI) requirements and to ensure proper operation, the controller

must be adequately grounded before power is connected. Connect a grounding cable to earth ground and then attach

it to the chassis grounding point using two screws.

Comply with electrical grounding standards during all phases of installation and operation of the product. Do not

allow the controller’s chassis, network ports, power supply, or mounting brackets to contact any device, cable, object,

or person attached to a different electrical ground. Also, never connect the device to external storm grounding

sources.

Dell Networking W-7205 Controller | Installation Guide W-7205 Controller| 19

La page charge ...

Dell W-7205 Guide de démarrage rapide

Marque: Dell

Modèle: W-7205

Catégorie: Modules de commutation réseau

Taper: Guide de démarrage rapide

Télécharger le PDF

rapport

dans d''autres langues

English: Dell W-7205 Quick start guide

Dell W-7205 Guide de démarrage rapide

Dell W-7205 Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents