Lego 7065 Building Instruction

Catégorie
LEGO
Taper
Building Instruction

Ce manuel convient également à

7065
1
7065_BI_BK1.indd 1 24/01/2011 11:14 AM
3X
+
-
1
2
3
4
1
2
3
4
2
7065_BI_BK1.indd 2 24/01/2011 11:14 AM
3
7065_BI_BK1.indd 3 24/01/2011 11:14 AM
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
4
7065_BI_BK1.indd 4 27/01/2011 12:09 PM
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
5
7065_BI_BK1.indd 5 24/01/2011 11:14 AM
1
2
6
7065_BI_BK1.indd 6 24/01/2011 11:14 AM
1
+
+
=
=
7
7065_BI_BK1.indd 7 24/01/2011 11:14 AM
1x
1
4x
2
8
7065_BI_BK1.indd 8 24/01/2011 11:14 AM
2x
4
4x
3
9
7065_BI_BK1.indd 9 24/01/2011 11:14 AM
2x
5
4x
4x
6
10
7065_BI_BK1.indd 10 24/01/2011 11:14 AM
7
2x 2x
11
7065_BI_BK1.indd 11 24/01/2011 11:14 AM
4x
8
12
7065_BI_BK1.indd 12 24/01/2011 11:14 AM
1x
9
1x
13
7065_BI_BK1.indd 13 24/01/2011 11:14 AM
4x
10
14
7065_BI_BK1.indd 14 24/01/2011 11:14 AM
11
1x
15
7065_BI_BK1.indd 15 24/01/2011 11:14 AM
1x
1
1x
2
1x
2x
3
16
7065_BI_BK1.indd 16 24/01/2011 11:14 AM
1x
4
1x 1x
5
2x
6
17
7065_BI_BK1.indd 17 24/01/2011 11:14 AM
12
18
7065_BI_BK1.indd 18 24/01/2011 11:14 AM
2x 4x
13
1 2
2x
2
2x
19
7065_BI_BK1.indd 19 24/01/2011 11:14 AM
2x
14
20
7065_BI_BK1.indd 20 24/01/2011 11:14 AM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Lego 7065 Building Instruction

Catégorie
LEGO
Taper
Building Instruction
Ce manuel convient également à

dans d''autres langues