ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions
worldwide. All other trademarks are the property of their respective owners. © 2022 Zebra Technologies Corp. and/or
its affiliates. All rights reserved. | www.zebra.com TMP-1760-01-Y
TC78
Regulatory Guide Form
Regulatory Information
This device is approved under Zebra Technologies Corporation.
This guide applies to the following model numbers:
•TC78A1
•TC78B1
•TC78C1
•TC78J1
All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold
and will be labeled as required.
Local language translation / (BG) Превод на местен език / (CZ) Překlad do místního jazyka / (DE)
Übersetzung in die Landessprache / (EL) Μετάφραση τοπικής γλώσσας / (ES) Traducción de idiomas
locales / (ET) Kohaliku keele tõlge / (FI) Paikallinen käännös / (FR) Traduction en langue locale / (HR)
Prijevod na lokalni jezik / (HU) Helyi nyelvű fordítás / (IT) Traduzione in lingua locale / (JA) 現地語翻訳 /
(LT) Vietinės kalbos vertimas / (LV) Tulkojums vietējā valodā / (NL) Vertaling in lokale taal / (PL)
Tłumaczenie na język lokalny / (PT) Tradução do idioma local / (RO) Traducere în limba locală / (RU)
Перевод на местный язык / (SK) Preklad do miestneho jazyka / (SL) Prevajanje v lokalni jezik / (SR)
Превод на локални језик / (SV) Översättning av lokalt språk / (TR) Yerel dil çevirisi / (ZH-CN) 当地语言翻
译 / (ZH-TW) 當地語言翻譯
zebra.com/support
Any changes or modifications to Zebra equipment not expressly approved by Zebra could void the user’s
authority to operate the equipment.
Declared maximum operating temperature: xxxx°C
CAUTION: Only use Zebra approved and NRTL-certified accessories, battery packs, and battery
chargers.
Do NOT attempt to charge damp/wet mobile computers, printers or batteries. All components must
be dry before connecting to an external power source.
Bluetooth® Wireless Technology
This is an approved Bluetooth® product. For more information on the Bluetooth SIG listing, please visit
www.bluetooth.com.
Regulatory Markings
Regulatory markings subject to certification are applied to the device signifying the radio(s) is/are approved
for use. Refer to the Declaration of Conformity (DoC) for details of other country markings. The DOC is
available at: www.zebra.com/doc.
The regulatory marks specific to this device (including FCC and ISED) are available on the screen of the
device by following these instructions:
Go to Settings > Regulatory.
2
Health and Safety Recommendations
Ergonomic Recommendations
In order to avoid or minimize the potential risk of ergonomic injury, always follow good ergonomic
workplace practices. Consult with your local Health and Safety Manager to ensure that you are adhering to
your company’s safety programs to prevent employee injury.
Vehicle Installation
RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles
(including safety systems). Check with the manufacturer or its representative regarding your vehicle.
Ensure the equipment is installed to avoid driver distractions. You should also consult the manufacturer
about any equipment that has been added to your vehicle.
Position the device within easy reach. User should be able to access the device without removing their
eyes from the road.
IMPORTANT: Before installing or using, check national and local laws regarding distracted driving.
Safety on the Road
Give your full attention to driving. Obey the laws and regulations on the use of wireless devices in the
areas where you drive.
The wireless industry reminds you to use your device / phone safely when driving.
Restricted Use Locations
Remember to observe restrictions and obey all signs and instructions on the use of electronic devices in
restricted use locations.
Safety in Hospitals and Aircraft
Wireless devices transmit radio frequency energy that may affect medical electrical equipment and
aircraft’s operation. Wireless devices should be switched off wherever you are requested to do so
in hospitals, clinics, healthcare facilities or by airline staff. These requests are designed to prevent
possible interference with sensitive equipments.
Medical Devices
It is recommended that a minimum separation distance of 20 cm (8 inches) be maintained between a
wireless device and a medical devices such as pacemakers, defibrillator, or other implantable devices to
avoid potential interference with the medical device. Pacemaker users should keep the device at the
opposite side of the pacemaker or turn OFF the device if suspected of interference.
Please consult your physician or the manufacturer of the medical device to determine if the operation of
your wireless product may interfere with the medical device.
3
RF Exposure Guidelines
Safety Information
Reducing RF Exposure – Use Properly
Only operate the device in accordance with the instructions supplied.
The device complies with internationally recognized standards covering human exposure to
electromagnetic fields. For information on international human exposure to electromagnetic fields, refer to
the Zebra Declaration of Conformity (DoC) at www.zebra.com/doc.
Use only Zebra tested and approved headset, belt-clips, holsters, and similar accessories to ensure RF
exposure compliance. If applicable, follow the instructions for use as detailed in the accessory guide.
The use of third-party belt clips, holsters, and similar accessories may not comply with RF exposure
compliance requirements and should be avoided.
For further information on the safety of RF energy from wireless devices, refer to RF exposure and
assessment standards section at www.zebra.com/responsibility.
To satisfy RF exposure requirements, this device must operate with a minimum separation distance
of 1.5 cm or more from a user's body and nearby persons.
Optical Devices
Laser
Class 2 laser scanners use a low power, visible light diode. As with any very bright light source such as the
sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is
not known to be harmful.
CAUTION: Use of controls, adjustments, or the performance of procedures other than those
specified in the supplied product documentation may result in hazardous laser light exposure.
SE5500 Wavelength: 500-570 nm
Maximum output: 1 mW
Pulse duration: 4 ms
Beam divergence: 18 °
Repetition rate: 16.7 ms
SE4770 Wavelength: 630-680 nm
Maximum output: 1 mW
Pulse duration: 12.5 ms
Beam divergence: 42.7 °
Repetition rate: 16.9 ms
4
Scanner Labeling
Labels read:
1. Laser Light — do not stare into beam.
Class 2 Laser product. 630-680mm, 1mW (applied to SE4700)
2. Complies with 21 CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 56,
dated May 08, 2019 and IEC/EN 60825-1:2014.
CAUTION: Laser light emitted from this aperture.
LED
Risk Group classified according to IEC 62471:2006 and EN 62471:2008.
•SE4770 Pulse Duration: 17.7 ms
Exempt Group (RG0)
•SE5500 Pulse Duration: CW
Exempt Group (RG0)
Weights & Measures
For devices that incorporate a ‘Legal for Trade’ weighing or measuring instrument, Weights & Measures
regulations place responsibility of DEVICE OWNER to notify their local Weight & Measures Authority and
follow any Placing-in-Trade requirements. These steps must be done prior to using the device to perform
measurement based financial transactions. More information can be found at
zebra.com/weights-measures.
Power Supply
WARNING ELECTRICAL SHOCK: Use only a Zebra approved, Certified ITE SELV power supply
with appropriate electrical ratings. Use of alternative power supply will invalidate any approvals
given to this unit and may be dangerous.
*
1
2
LASER LIGHT - DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT.
LUMIÉRE LASER - NE PAS REGARDER DANS LE FAISCEAU.
APPAREIL À LASER DE CLASSE 2.
*
5
Batteries and Power Packs
This information applies to Zebra-approved batteries and power packs containing batteries.
Battery Information
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of batteries
according to instructions.
Use only Zebra approved batteries. Accessories which have battery charging capability are approved for
use with the following battery models:
•Model BT-000442 (3.85 VDC, 4680 mAh)
•Model BT-000442B (3.85 VDC, 4680 mAh)
•Model BT-000442A (3.85 VDC, 7000 mAh)
•Model BT-000442C (3.85 VDC, 4680 mAh)
Zebra approved rechargeable battery packs are designed and constructed to the highest standards within
the industry.
However, there are limitations as to how long a battery can operate or be stored before needing
replacement. Many factors affect the actual life cycle of a battery pack such as heat, cold, harsh
environmental conditions, and severe drops.
When batteries are stored over six months, some irreversible deterioration in overall battery quality may
occur. Store batteries at half charge in a dry, cool place, removed from the equipment to prevent loss of
capacity, rusting of metallic parts, and electrolyte leakage. When storing batteries for one year or longer,
the charge level should be verified at least once a year and charged to half charge.
Replace the battery when a significant loss of run time is detected.
•Standard warranty period for all Zebra batteries is one year, regardless if the battery was purchased
separately or included as part of the host device. For more information on Zebra batteries, please visit:
www.zebra.com/batterydocumentation and select the Battery Best Practices link.
Battery Safety Guidelines
IMPORTANT – SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS
WARNING – When using this product basic safety precautions should always be followed,
including the following:
The area in which the units are charged should be clear of debris and combustible materials or chemicals.
Particular care should be taken where the device is charged in a non-commercial environment.
•Read all the instructions before using the product.
•Follow battery usage, storage, and charging guidelines found in the user's guide.
•Improper battery use may result in a fire, explosion, or other hazard.
•Batteries subjected to extremely low air pressure may result in an explosion or the leakage of
flammable liquid or gas.
To charge the mobile device battery, the battery and charger temperatures must be between
xx°C and xx°C (xx°F and xx°F).
Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a
risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a
battery or a charger, contact Zebra support.
6
Do not disassemble or open, crush, bend or deform, puncture, or shred. Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
Severe impact from dropping any battery-operated device on a hard surface could cause the battery to
overheat.
Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals.
Do not modify, disassemble, or remanufacture, attempt to insert foreign objects into the battery, immerse
or expose to water, rain, snow or other liquids, or expose to fire, explosion, or other hazard.
Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or
near a radiator or other heat source. Do not place battery into a microwave oven or dryer.
To reduce the risk of injury, close supervision is necessary when used near children.
Please follow local regulations to promptly dispose of used re-chargeable batteries.
Do not dispose of batteries in fire. Exposure to temperatures over 100°C (212°F) may cause explosion.
Seek medical advice immediately if a battery has been swallowed.
In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has
been made, wash the affected area with large amounts of water and seek medical advice.
If you suspect damage to your equipment or battery, contact Zebra support to arrange for inspection.
Marking and European Economic Area (EEA)
Statement of Compliance
Zebra hereby declares that this radio equipment is in compliance with Directives 2014/53/EU and
2011/65/EU.
Any radio operation limitations within EEA countries are identified in Appendix A of EU Declaration of
Conformity. The full text of the EU Declaration of Conformity is available at: www.zebra.com/doc.
EU Importer : Zebra Technologies B.V
Address: Mercurius 12, 8448 GX Heerenveen, Netherlands
Waste Electrical and Electronic Equipment (WEEE)
For EU and UK Customers: For products at the end of their life, please refer to recycling/disposal advice
at: www.zebra.com/weee.
7
United States and Canada Regulatory
Radio Frequency Interference Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules.These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Radio Frequency Interference Requirements – Canada
Innovation, Science and Economic Development Canada ICES-003 Compliance Label: CAN ICES-003
([B])/NMB-003([B])
This device complies with Innovation, Science and Economic Development Canada’s licence-exempt
RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of
the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire
de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radio électrique subi même si le
brouillage est susceptible d'en compromettre le fonctionnement.
This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range.
Lorsqu'il fonctionne dans la plage de fréquences 5 150- 5350 MHz, cet appareil doit être utilisé
exclusivement en extérieur.
RF Exposure Requirements - FCC and ISED
The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated in
compliance with the FCC RF emission guidelines. SAR information on this device is on file with the FCC
and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid.
To satisfy RF exposure requirements, this device must operate with a minimum separation distance of
1.5 cm or more from a user's body and nearby persons.
Pour satisfaire aux exigences d'exposition aux radio fréquences, cet appareil doit fonctionner avec une
distance de séparation minimale de 1.5 cm ou plus de corps d'une personne.
8
Hotspot Mode
To satisfy RF exposure requirements in hotspot mode, this device must operate with a minimum
separation distance of 1.0 cm or more from a user's body and nearby persons.
Pour satisfaire aux exigences d'exposition RF en mode hotspot, cet appareil doit fonctionner avec une
distance de séparation minimale de 1,0 cm ou plus du corps de l'utilisateur et des personnes à proximité.
Co-located Statement
To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not
be co-located (within 20 cm) or operating in conjunction with any other transmitter/antenna except those
already approved in this filling.
Hotspot ISED Notice
When operating in hotspot mode, this device is restricted to indoor use when operating in the
5150 -5350 MHz frequency range.
En mode de connexion partagée (hotspot), l'utilisation de cet appareil doit se faire exclusivement en
extérieur lorsqu'il fonctionne dans la plage de fréquences 5 150 -5 350 MHz.
Use with Hearing Aids - FCC
When some wireless devices are used near some hearing devices (hearing aids and cochlear implants),
users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than
others to this interference noise, and wireless devices also vary in the amount of interference they
generate. In the event of interference, you may want to consult your hearing aid supplier to discuss
solutions.
The wireless telephone industry has developed ratings for some of their mobile phones to assist hearing
device users in finding phones that may be compatible with their hearing devices. Not all phones have
been rated. Zebra terminals that are rated have the rating included on the Declaration of Conformity (DoC)
at www.zebra.com/doc.
The ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing loss.
If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone
successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal
needs.
ANSI C63.19 Rating System
In accordance with FCC hearing aid compatibility rules, certain phones be tested and rated under the
American National Standard Institute (ANSI) C63.19 hearing-aid compatibility standard. This standard
contains two types of ratings:
• M-Rating: For reduced radio-frequency interference to enable acoustic coupling with hearing aids that
don’t operate in telecoil mode
• T-rating : For inductive coupling with hearing aids operating in telecoil mode (t-switch or telephone
switch)
These ratings are on a scale from one to four, where four is the most compatible. A phone is considered
hearing-aid compatible under the FCC requirements if it's rated M3 or M4 for acoustic coupling and T3 or
T4 for inductive coupling.
Hearing devices may also be measured for immunity to this type of interference. Your hearing device
manufacturer or hearing health professional may help you find results for your hearing device. The more
immune your hearing aid is, the less likely you are to experience interference noise from mobile phones.
9
Hearing Aid Compatibility
This phone has been tested and rated for use with hearing aids for some of the wireless technologies that
it uses. However, there may be some newer wireless technologies used in this phone that have not been
tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and
in different locations using your hearing aid or cochlear implant to determine if you hear any interfering
noise. Consult your service provider or the manufacturer of this phone for information on hearing aid
compatibility. If you have questions about return or exchange policies, consult your service provider or
phone retailer.
This phone has been tested to ANSI C63.19 and rated for use with hearing aids; it received a M4/T3 rating.
This device is marked HAC showing compliance with the applicable requirements of the FCC.
UL Listed Products with GPS
Underwriters Laboratories Inc. (UL) has not tested the performance or reliability of the Global Positioning
System (GPS) hardware, operating software, or other aspects of this product. UL has only tested for fire,
shock, or casualties as outlined in UL’s Standard(s) for Safety for Information Technology Equipment. UL
Certification does not cover the performance or reliability of the GPS hardware and GPS operating
software. UL makes no representations, warranties, or certifications whatsoever regarding the
performance or reliability of any GPS related functions of this product.
Marquage UL des produits équipés d'un GPS
Les tests menés par Underwriters Laboratories Inc. (UL) ne portent ni sur les performances, ni sur la
fiabilité du matériel et du logiciel d'exploitation du GPS (Global Positioning System), ni sur tout autre
aspect de ce produit. UL a uniquement testé la résistance au feu, aux chocs et aux sinistres, comme le
définit la norme UL60950-1 relative à la sécurité des matériels de traitement de l'information. La
certification UL ne couvre ni les performances, ni la fiabilité du matériel et du logiciel d'exploitation GPS.
UL ne formule aucune déclaration, ni ne délivre aucune garantie ni aucun certificat concernant les
performances et la fiabilité des fonctions GPS de ce produit.
日本 (Japan)
このデバイ ス と 一緒に販売 されている充電式バ ッ テ リ ーには、 回収、 処理、 リ サイ クルで き る貴重な金
属やその他の素材が含まれています。 充電式バ ッ テ リ ー パ ッ ク を安全に廃棄する方法については、 最寄
り の リ サイ クル セン タ ーにお問い合わせ く だ さ い。
Brasil
Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar
interferência em sistemas devidamente autorizados.
Este produto está homologado pela Anatel de acordo com os procedimentos regulamentados para
avaliação da conformidade de produtos para telecomunicações e atende aos requisitos técnicos
aplicáveis, incluindo os limites da medida da exposição humana referente a campos elétricos, magnéticos
e eletromagnéticos de radiofrequência
10
中国 (China)
通过访问以下网址可下载当地语言支持的产品说明书 www.zebra.com/support
确认进网标贴和证书真伪可查询网址 : www.tenaa.com.cn/.
锂电池安全警示语 :
警告：请勿拆装，短路，撞击，挤压或者投入火中
注意：如果电池被不正确型号替换，或出现鼓胀，会存在爆炸及其他危险
请按说明处置使用过的电池
电池浸水后严禁使用
本产品局部暴露下电磁照射比吸收率 （SAR）最大值为 2W/kg，符合国家标准 GB21288-2020 的
要求。
本产品局部暴露下电磁照射比吸收率最大值为 2W/kg，功率密度最大值为 20W/m²，符合国家标准
GB21288-2020 的要求。
如果配套使用外部电源适配器，请确保其已通过 CCC 认证
（一） 符合 “ 微功率短距离无线电发射设备目录和技术要求 ” 的具体条款和使用场景，采用的天线类型和性
能，控制、调整及开关等使用方法；
（二）不得擅自改变使用场景或使用条件、扩大发射频率范围、加大发射功率 （包括额 外加装射频功率
放大器），不得擅自更改发射天线；
（三）不得对其他合法的无线电台 （站）产生有害干扰，也不得提出免受有害干扰保护；
（四）应当承受辐射射频能量的工业、科学及医疗 （ISM）应用设备的干扰或其他合法的无线电台 （站）
干扰；
（五）如对其他合法的无线电台 （站）产生有害干扰时，应立即停止使用，并采取措施消除干扰后方可继
续使用；
（六）在航空器内和依据法律法规、国家有关规定、标准划设的射电天文台、气象雷达站、卫星地球站
（含测控、测距、接收、导航站）等军民用无线电台 （站）、机场等的电磁环境保护区域内使用微功率设
备，应当遵守电磁环境保护及相关行业主管部门的规定；
（七）禁止在以机场跑道中心点为圆心、半径 5000 米的区域内使用各类模型遥控器；
（八）有关支持的工作环境条件，请参阅本指南的最高工作温度以及电池信息和电源信息部分。
11
产品中有害物质的名称及含量
Colombia
Señor usuario, la siguiente información se entrega de conformidad con lo establecido en el Régimen de
protección de los derechos de los usuarios, expedido por la Comisión de Regulación de Comunicaciones.
Recomendaciones de uso:
1. Utilice siempre que pueda dispositivos manos libres.
2. Evite utilizar el equipo mientras conduce un vehículo.
3. En caso que el teléfono sea utilizado por niños, ancianos, mujeres embarazadas y población
inmunocomprometida, consulte a su médico y el manual del equipo.
4. Si usted utiliza algún dispositivo electrónico de uso médico, asegúrese que el mismo esté protegido
contra las ondas de radiofrecuencia externas.
5. Apague su teléfono en lugares tales como: hospitales, centros de salud, aviones, estaciones de
suministro de combustible, en presencia de gases explosivos y lugares donde se realizan explosiones.
6. Evite que terceros hagan uso de su teléfono para prevenir la implantación de dispositivos como
programas espías (spyware) o identificadores ocultos, que atentan contra la seguridad de la
información contenida en el mismo.
Евразийский Таможенный Союз (EAC)
Данный продукт соответствует требованиям знака EAC.
部件名称 (Parts)
有害物质
铅(Pb) 汞(Hg) 镉(Cd) 六价铬
(Cr(VI))
多溴联
苯
(PBB)
多溴二
苯醚
(PBDE)
金属部件 (Metal Parts)
电路模块 (Circuit
电缆及电缆组件 (Cables
塑料和聚合物部件
光学和光学组件 (Optics
打印头 (Print Heads)
电池 (Batteries)
外部电源 (Ext. Pwr Sply)
本表格依据 SJ/T 11364 的规定编制。
O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
X: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。( 企业可在此
处，根据实际情况对上表中打 “×” 的技术原因进行进一步说明。
12
France
Cet appareil a été testé et déclaré conforme aux limites applicables d'exposition aux radiofréquences (RF).
Le débit d'absorption spécifique (DAS) local quantifie l'exposition de l'utilisateur aux ondes
électromagnétiques de l'équipement concerné.
Les valeurs SAR les plus élevées sont disponibles sur la déclaration de conformité (DoC) disponible sur:
www.zebra.com/doc
India
The sending and receiving of texts is supported in the following Indian languages:
Assamese, Bengali, Gujarati, Hindi, Kannada, Kashmiri, Konkani, Malayalam, Manipuri, Marathi, Nepali,
Oriya, Punjabi, Sanskrit, Sindhi, Tamil, Telugu, Urdu, Bodo, Santhali, Maithili, and Dogri.
México
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o
dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier
interferencia, incluyendo la que pueda causar su operación no deseada.
한국 (South Korea)
전자파흡수율
본 제품의 전자파흡수율은 과학기술정보통신부의 「전자파 인체보호기준」을 만족합니다 . 본 제품은
국립전파연구원의 「전자파흡수율 측정기준」에 따라 최대 출력 조건에서 머리에 근접하여 시험되었으며 ,
최대 전자파흡수율 측정값은 다음과 같습니다 .
모델명 : TC78B1
전자파흡수율 (SAR : Specified Absorption Rate) 은 휴대전화를 사용할 때 인체에 흡수될 수 있는 전자파의
양으로 우리나라는 국제권고기준인 2 W/kg 보다 엄격한 1.6 W/kg 기준을 적용하고 있습니다 .
그러나 일상생활에서는 최대출력보다 현저히 낮은 출력 상태에서 통신이 이루어지므로 전자파흡수율은 위
시험 결과보다 매우 낮습니다 .
전자파흢율에 대한 자세한 정보는 국립전파연구원 (www.rra.go.kr) 또는 제조사 홈페이지에서 확인할 수
있습니다 .
臺灣 (Taiwan)
低功率電波輻射性電機管理辦法
取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更
原設計之特性及功能。
低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至
無干擾時方得繼續使用。
前述合法通信，指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及
醫療用電波輻射性電機設備之干擾。
應避免影響附近雷達系統之操作
13
減少電磁波影響，請妥適使用
型號 TC78B1 SAR 標準值 2.0 W/kg ；送測產品實測值為：TBC W/kg
公司資訊
台灣斑馬科技股份有限公司 / 台北市信義區松高路 9 號 13 樓
行政院環保署 (EPA) 要求乾電池製造或進口商，需依廢棄物清理法第 15 條之規定，於販售、贈
送或促銷的電池上標示回收標誌。請聯絡合格的台灣回收廠商，以正確棄置電池。
Türkiye (Turkey)
Bu cihaz Türkçe karakterlerin tamamını ihtiva eden ETSI TS 123.038 V8.0.0 (veya sonraki sürümünkodu)
ve ETSI TS 123.040 V8.1.0 (veya sonraki sürümün kodu) teknik özelliklerine uygundur.
TÜRK WEEE Uyumluluk Beyanı
EEE Yönetmeliğine Uygundur.
ประเทศไทย (Thailand)
เครื่องโทรคมนาคมและอุปกรณ์นี้ มีความสอดคล้องตามข้อกำหนดของ กทช .
เครื่องวิทยุคมนาคมนี้มีอัตราการดูดกลืนพลังงานจําเพาะ (Specific Absorption Rate – SAR)
อันเนื่องมาจากเครื่องวิทยุคมนาคมเท่ากับ
•TC78B1 TBC w/kg
ซึ่งสอดคล้องตามมาตรฐานความปลอดภัยต่อสุขภาพของมนุษย์จากการใช้เครื่องวิทยุคมนาคมที่คณะกร
รมการกิจการโทรคมนาคมแห่งชาติประกาศกําหนด
United Kingdom
Statement of Compliance
Zebra hereby declares that this radio equipment is in compliance with the Radio Equipment Regulations
2017 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012.
Any radio operation limitations within UK are identified in Appendix A of UK Declaration of Conformity.
The full text of the UK Declaration of Conformity is available at: www.zebra.com/doc.
UK Importer: Zebra Technologies Europe Limited
Address:
Dukes Meadow, Millboard Rd, Bourne End, Buckinghamshire, SL8 5XF
14
Warranty
For the complete Zebra hardware product warranty statement, go to: zebra.com\warranty.
Service Information
Before you use the unit, it must be configured to operate in your facility's network and run your
applications.
If you have a problem running your unit or using your equipment, contact your facility's Technical or
System Support. If there is a problem with the equipment, they will contact Zebra support at
zebra.com/support.
For the latest version of the guide go to: zebra.com\support.
Software Support
Zebra wants to ensure that customers have the latest entitled software at the time of device purchase in
order to keep the device operating at peak performance levels. To confirm that your Zebra device has the
latest entitled software available at the time of purchase, go to zebra.com/support.
Check for the latest software from Support > Products, or search for the device and select Support >
Software Downloads.
If your device does not have the latest entitled software as of your device purchase date, e-mail Zebra at
[email protected] and ensure you include the following essential device information:
•Model number
•Serial number
•Proof of purchase
•Title of the software download you are requesting.
If it is determined by Zebra that your device is entitled to the latest version of software, as of the date you
purchased your device, you will receive an e-mail containing a link directing you to a Zebra Web site to
download the appropriate software.
Product Support Information
•For information on using this product, see the User Guide at zebra.com/vanityURL.
•To find quick answers to known product behaviors, access our knowledge articles at
supportcommunity.zebra.com/s/knowledge-base.
•Ask your questions in our Support community at supportcommunity.zebra.com.
•Download product manuals, drivers, software, and view how-to videos at zebra.com/support.
•To request a repair for your product, go to zebra.com/repair.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
dans d''autres langues
- English: Zebra TC78 Regulatory User guide
Documents connexes
-
Zebra TC22 Mode d'emploi
-
Zebra EC55BK Enterprise Mobile Computer Manuel utilisateur
-
Zebra TC58 Le manuel du propriétaire
-
Zebra TC27 Le manuel du propriétaire
-
-
-
-
-
-
