Yamaha PSR-E283 Le manuel du propriétaire

Yamaha
Marque
Yamaha
Modèle
PSR-E283
Taper
Le manuel du propriétaire

Ce manuel convient également à

Before using the instrument, be sure to read
“PRECAUTIONS” on pages 5–7.
PSR-E283 YPT-280 Owner’s Manual
2
FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC, to
use the product.
2. IMPORTANT: When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation
instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to
comply with the requirements listed in FCC Regulations,
Part 15 for Class “B” digital devices. Compliance with
these requirements provides a reasonable level of
assurance that your use of this product in a residential
environment will not result in harmful interference with
other electronic devices. This equipment generates/
uses radio frequencies and, if not installed and used
according to the instructions found in the users manual,
may cause interference harmful to the operation of
other electronic devices. Compliance with FCC
regulations does not guarantee that interference will
not occur in all installations. If this product is found to
be the source of interference, which can be determined
by turning the unit “OFF” and “ON”, please try to
eliminate the problem by using one of the following
measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch
(circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/
reorient the antenna. If the antenna lead-in is 300 ohm
ribbon lead, change the lead-in to co-axial type cable.
If these corrective measures do not produce
satisfactory results, please contact the local retailer
authorized to distribute this type of product. If you can
not locate the appropriate retailer, please contact
Yamaha Corporation of America, Electronic Service
Division, 6600 Orangethorpe Ave, Buena Park,
CA90620
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
* This applies only to products distributed by Yamaha Corporation of America. (class B)
COMPLIANCE INFORMATION STATEMENT
(Supplier’s declaration of conformity procedure)
Responsible Party : Yamaha Corporation of America
Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620
Telephone : 714-522-9011
Type of Equipment : Digital Keyboard
Model Name : PSR-E283/YPT-280
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference that
may cause undesired operation.
* This applies only to products distributed by Yamaha Corporation of America. (FCC SDoC)
The model number, serial number, power
requirements, etc., may be found on or near
the name plate, which is at the bottom of the
unit. You should note this serial number in the
space provided below and retain this manual
as a permanent record of your purchase to aid
identification in the event of theft.
Model No.
Serial No.
(bottom_en_01)
3
PSR-E283 YPT-280 Owner’s Manual
Information for users on collection and disposal of old equipment and used batteries:
These symbols on the products, packaging, and/or accompanying documents mean that used electrical
and electronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to
applicable collection points, in accordance with your national legislation.
By disposing of these products and batteries correctly, you will help to save valuable resources and
prevent any potential negative effects on human health and the environment which could otherwise
arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your
local municipality, your waste disposal service or the point of sale where you purchased the items.
For business users in the European Union:
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for
further information.
Information on Disposal in other Countries outside the European Union:
These symbols are only valid in the European Union. If you wish to discard these items, please contact
your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the
requirement set by the EU Battery Directive for the chemical involved.
(weee_battery_eu_en_02)
PSR-E283 YPT-280 Owner’s Manual
4
For the AC adaptor
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Explanation of Graphical Symbols
The lightning flash with arrowhead
symbol within an equilateral triangle is
intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the product.
IMPORTANT SAFETY INSTRUCTIONS
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer’s
instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9 Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11 Only use attachments/accessories specified by
the manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table
specified by the manufacturer,
or sold with the apparatus.
When a cart is used, use
caution when moving the cart/
apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
(502-M01 UL 60065-1 en 01)
5
PSR-E283 YPT-280 Owner’s Manual
DMI-11 1/3
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Especially in the case of children, a guardian should provide guidance on
how to properly use and handle the product before actual use.
Please keep this manual in a safe and handy place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury
or even death from electrical shock, short-circuiting, damages, fire or other hazards. These
precautions include, but are not limited to, the following:
Power supply
• Do not place the power cord near heat sources such as
heaters or radiators. Also, do not excessively bend or
otherwise damage the cord, or place heavy objects on it.
• Do not touch the product or the power plug during an
electrical storm.
• Use only the correct voltage specified for the product.
The required voltage is printed on the name plate of the
product.
• Use only the supplied or the specified AC adaptor (page
22). Do not use the AC adaptor for other devices.
• Check the power plug periodically and remove any dirt or
dust which may have accumulated on it.
• Insert the power plug firmly all the way into the AC outlet.
Using the product when it is not plugged in sufficiently can
cause dust to accumulate on the plug, possibly resulting in
fire or skin burns.
• When setting up the product, make sure that the AC
outlet you are using is easily accessible. If some trouble or
malfunction occurs, immediately turn off the power switch
and disconnect the plug from the outlet. Even when the
power switch is turned off, as long as the power cord is not
unplugged from the wall AC outlet, the product will not be
disconnected from the power source.
• Do not connect the product to an electrical outlet using a
multi-plug outlet extender. Doing so can result in lower
sound quality, or possibly cause overheating in the outlet.
• When disconnecting the power plug, always hold the plug
itself and not the cord. Pulling by the cord can damage it
and cause electric shocks or a fire.
• If not using the product for long periods of time, be sure to
pull the power plug from the AC outlet.
Do not disassemble
• This product contains no user-serviceable parts. Do not
attempt to disassemble the internal parts or modify them
in any way.
Water warning
• Do not expose the product to rain, use it near water or in
damp or wet conditions, or place on it any containers (such
as vases, bottles or glasses) containing liquids which might
spill into any openings or places where water may drop. A
liquid such as water getting into the product may cause a
fire, electric shocks, or malfunctions.
• Use the AC adaptor indoors only. Do not use in any wet
environments.
• Never insert or remove a power plug with wet hands.
Fire warning
• Do not place any burning items or open flames near the
product, since they may cause a fire.
Batteries
• Do not dispose of a battery in a fire.
• Do not expose the battery to conditions of extreme low air
pressure, cold or heat (such as in direct sunlight or a fire) or
excessive dust or humidity.
Doing so may result in the battery bursting, causing a fire
or injury.
• Follow the precautions below. Failure to do so might result
in battery fluid leakage. If the contents of the battery gets
on your hands or in your eyes, it can cause blindness,
chemical burns, and damage of the product.
–Use the specified battery type (page 22) only.
–Do not use new batteries together with old ones.
–Do not mix battery types.
–Always make sure all batteries are inserted in conformity
with the +/– polarity markings.
–Do not disassemble a battery.
–When the batteries run out, or if the product is not to
be used for a long time, remove the batteries from the
product.
–Do not attempt to recharge batteries that are not
designed to be charged.
PSR-E283 YPT-280 Owner’s Manual
6
DMI-11 2/3
• If the batteries do leak, avoid contact with the leaked fluid.
If the battery fluid should come in contact with your eyes,
mouth, or skin, wash immediately with water and consult
a doctor. Battery fluid is corrosive and may possibly cause
loss of sight or chemical burns.
• When using rechargeable batteries, follow the instructions
that came with the batteries. Use only the specified charger
device and within the specified charging temperature range
when charging.
Charging with an unspecified charger or at a temperature
outside the range may cause leakage, overheating,
explosion, or malfunction.
• Keep batteries away from children. A child could
accidentally swallow a battery. Failure to observe this may
also cause inflammation due to battery fluid leaks.
• Do not subject batteries to mechanical shock.
Doing so may cause damage caused by batteries, electric
shock, or malfunction.
• Do not intentionally short the battery. Explosion or liquid
leakage may cause fire or injury.
• Do not put batteries in a pocket or bag, or carry or store
them together with pieces of metal. Batteries kept in such
condition could short, burst, or leak, causing a fire or injury.
If you notice any abnormality
• If any of the following problems occur, immediately turn off
the power switch and disconnect the power plug from the
outlet. If you are using batteries, remove all batteries from
the product. Finally have the device inspected by Yamaha
service personnel.
–The power cord or plug becomes frayed or damaged.
–Unusual smells or smoke are emitted.
–Some object, or water has been dropped into the product.
–There is a sudden loss of sound during use of the product.
–Cracks or other visible damage appear on the product.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to
you or others, or damage to the product or other property. These precautions include, but
are not limited to, the following:
Location
• Do not place the product in an unstable position or
a location with excessive vibration, where it might
accidentally fall over and cause injury.
• Before moving the product, remove all connected cables,
to prevent damage to the cables or injury to anyone who
might trip over them.
• Use only the stand specified for the product. When
attaching it, use the provided screws only. Failure to do so
could cause damage to the internal components or result in
the product falling over.
Connections
• Before connecting the product to other devices, turn off the
power for all devices. Before turning the power on or off for
all devices, set all volume levels to minimum.
• Be sure to set the volumes of all devices at their minimum
levels and gradually raise the volume controls while playing
the product to set the desired listening level.
Handling
• Do not insert foreign materials such as metal or paper into
any openings or gaps of the product. Failure to observe this
may cause a fire, electric shocks, or malfunctions.
• Do not rest your weight on, or place heavy objects on the
product, and do not use excessive force on the buttons,
switches or connectors.
• Do not use the product or headphones for a long period
of time at a high or uncomfortable volume level, since this
can cause permanent hearing loss. If you experience any
hearing loss or ringing in the ears, consult a physician.
• Remove the power plug from the AC outlet before cleaning
the unit. Failure to observe this may cause electric shocks.
7
PSR-E283 YPT-280 Owner’s Manual
DMI-11 3/3
Yamaha cannot be held responsible for damage caused by improper use or modifications to the product, or data that is lost or
destroyed.
Always turn the power off when the product is not in use.
Even when the [ ] (Standby/On) switch is in standby status (display is off), electricity is still flowing to the product at the minimum
level.
When you are not using the product for a long time, make sure you unplug the power cord from the wall AC outlet.
NOTICE
To avoid the possibility of malfunction/
damage to the product, damage to data,
or damage to other property, follow the
notices below.
■Handling
• Do not use this product in the vicinity of a TV, radio, stereo
equipment, mobile phone, or other electric devices.
Otherwise, this product or the other device may generate
noise.
• When you use the product along with an app on your smart
device, such as a smartphone or tablet, we recommend that
you enable “Airplane Mode” on the device to avoid noise
caused by communication.
• Depending on the condition of surrounding radio waves,
the product may possibly malfunction.
• Do not expose the product to excessive dust or vibrations,
or extreme cold or heat (such as in direct sunlight, near a
heater, or in a car during the day) to prevent the possibility
of disfiguration, damage to the internal components or
unstable operation. (Verified operating temperature range:
5° – 40°C, or 41° – 104°F.)
• Do not place vinyl, plastic or rubber objects on the product,
since this might discolor the product.
• Do not press the LCD screen with your finger because it
is a sensitive, precision-made part. Doing so might cause
an appearance abnormality, such as a stripe on the LCD,
although this abnormality should disappear again within a
short time.
■Maintenance
• When cleaning the product, use a soft and dry (or slightly
damp) cloth. Do not use paint thinners, solvents, alcohol,
cleaning fluids, or chemical-impregnated wiping cloths.
■Saving data
• Some of the data of this product (page 20) are retained
when the power is turned off. However, the saved data may
be lost due to some failure, an operational mistake, etc.
Information
■About copyrights
• The copyright of the “content”*1 installed in this product
belongs to Yamaha Corporation or its copyright holder.
Except as permitted by copyright laws and other relevant
laws, such as copying for personal use, it is prohibited
to “reproduce or divert”*2 without the permission of the
copyright holder. When using the content, consult with a
copyright expert.
If you create music or perform with the contents through
the original use of the product, and then record and
distribute them, the permission of Yamaha Corporation is
not required regardless of whether the distribution method
is paid or free of charge.
*1: The word “content” includes a computer program,
audio data, Accompaniment Style data, MIDI data,
waveform data, voice recording data, music score, and
score data, etc.
*2: The phrase “reproduce or divert” includes taking out
the content itself in this product, or recording and
distributing it without changes in a similar manner.
■About functions/data bundled with the
product
• Some of the preset Songs have been edited for length
or arrangement, and may not be exactly the same as the
original.
■About the appearance of this product
• This product may appear to have lines or scratches on the
surface. The apparent lines or scratches are called “weld
lines.” They occur during the process of modeling the case
and do not affect the functionality of the product.
■About this manual
• The illustrations and LCD screens as shown in this manual
are for instructional purposes only.
• The company names and product names in this manual are
the trademarks or registered trademarks of their respective
companies.
■About disposal
• When disposing of this product, please contact the
appropriate local authorities.
PSR-E283 YPT-280 Owner’s Manual
8
Contents
About the Manuals ......................................................................................................................... 9
Included Accessories ..................................................................................................................... 9
Setting Up 10
Power Requirements ................................................................................................................... 10
Using an AC Adaptor ....................................................................................................................10
Using Batteries ............................................................................................................................. 10
Turning the Power On/Off...........................................................................................................11
Auto Power Off function ..............................................................................................................11
Using the Music Rest ................................................................................................................... 11
Panel Controls and Terminals 12
Let’s Enjoy Playing the Keyboard! 14
Selecting a Voice ...........................................................................................................................14
Calling up the Grand Piano Voice ............................................................................................... 14
Playing Various Sound Effects ....................................................................................................14
Playing the Keyboard with Two People (Duo Mode) ................................................................15
Listening to the Preset Songs ..................................................................................................... 15
Practicing your Favorite Songs (3-Step Lesson) .......................................................................16
Playing Along with Auto accompaniment (Styles).................................................................... 16
Try Guessing the Sound! (Sound Quiz) ...................................................................................... 17
Try the Memory Quiz! .................................................................................................................. 17
Play with Rhythm! (Rhythm Tutor) ............................................................................................. 18
Recording Your Performance .....................................................................................................18
Playing Sound from Your Smartphone or Other Audio Device .............................................. 19
About the Function Settings ....................................................................................................... 20
Troubleshooting 22
Specifications 22
Index 23
Thank you for purchasing this Yamaha Digital Keyboard!
It is loaded with various sounds and preset Songs, so that even beginners can enjoy playing it right
away.
We recommend that you read this manual carefully so that you can fully take advantage of the
advanced and convenient functions of the instrument.
We also recommend that you keep this manual in a safe and handy place for future reference.
9
PSR-E283 YPT-280 Owner’s Manual
About the Manuals
The following manuals are provided for the instrument.
Printed Manual
Owner’s Manual (this book)
Explains the basic operations of the instrument.
Online Manual
Reference Manual
Explains more detailed operating procedures and functions.
You can also check here for a detailed list of the content (sounds, Songs, Styles, Drum Kit, SFX Kit,
and functions) installed in the instrument.
The above manual can be viewed from the following Yamaha website.
PSR-E283 related data download:
https://manual.yamaha.com/mi/kb-ekb/psr-e283/downloads/
Video Manuals
Video manuals explaining how to use this instrument are available.
Scan the QR code to the left or access the website below.
https://manual.yamaha.com/mi/kb-ekb/psr-e283/movies/
If subtitles for your language are not displayed, set them with the “Subtitles/closed captions (cc)” and “Settings”
buttons in the lower right of the YouTube screen.
“Subtitles/closed captions (cc)” button (Switches the subtitle display on/off.)
“Settings” button (Sets the language of the subtitles, etc.)
Downloading the Song Book
Use the free downloadable songbook when playing this instrument. You can download the Song Book from the
“PSR-E283 related data download” website above.
SONG BOOK
This contains music scores for the preset Songs (excluding the Demo Songs) of this instrument.
Included Accessories
• Owner’s Manual (this book) ×1
• Music rest ×1
• AC adaptor* ×1
• Online Member Product Registration ×1
* May not be included depending on your area. Check with your Yamaha dealer.
PSR-E283 YPT-280 Owner’s Manual
10
Setting Up
Power Requirements
Although the instrument will run either from an AC
adaptor or batteries, Yamaha recommends the use
of an AC adaptor whenever possible.
Using an AC Adaptor
Connect the AC adaptor in the order shown in the
illustration.
DC IN jack
(page 13)
AC adaptor
2
AC outlet
1
WARNING
• Use only the supplied or the specified AC adaptor
(page22).
• When using an AC adaptor with a removable plug,
make sure to keep the plug attached to the AC
adaptor during use and storage. Inserting just the
plug into an outlet can cause electric shock or fire.
• Never touch the inner metallic section of the plug to
avoid electric shock, short circuit, or damage. If the
plug comes off, push it in until it securely clicks in
place. Also be careful that there is no dust or other
foreign matter between the AC adaptor and plug.
Plug
• Place the plug against the
far side, and then firmly
push it in until it clicks.
• The shape of the plug
differs depending on your
area.
For PA-130
CAUTION
• When setting up the instrument, make sure that the
AC outlet you are using is easily accessible. If trouble
or a malfunction occurs, immediately turn the power
off and disconnect the plug from the outlet.
NOTE
• When disconnecting the AC adaptor, turn off the power
of the instrument and follow the order shown above in
reverse.
Using Batteries
This instrument can use AA size alkaline,
manganese dry cell, or rechargeable nickel
metal hydride batteries (rechargeable batteries).
However, the use of alkaline or rechargeable
batteries is recommended, as the instrument may
consume large amounts of power depending on
use.
WARNING
• When the batteries run out, or if the instrument is not
to be used for a long time, remove the batteries from
the instrument.
1 Make sure that the power of the instrument is
off.
2 Open the battery compartment cover located
on the instrument’s bottom panel.
3 Insert the six new batteries, being careful to
follow the polarity markings on the inside of
the compartment.
4 Replace the compartment cover, making sure
that it locks firmly in place.
Make sure to set the battery type correctly
(page 11).
11
PSR-E283 YPT-280 Owner’s Manual
Setting Up
NOTICE
• Connecting or disconnecting the power adaptor with
batteries inserted may turn the power off, resulting in
loss of data being recorded at the time.
• When battery power becomes too low for proper
operation, the volume may be reduced, the sound may
be distorted, and other problems may occur. When
this happens, make sure to replace all batteries with
new ones or already recharged ones.
NOTE
• This instrument cannot charge the batteries. Use only the
specified charger device when charging.
• Even if batteries are inserted into the instrument, the AC
adaptor will be used as the power source when the AC
adaptor is connected.
Setting the battery type
Change the setting on the instrument (dry cell or
rechargeable batteries) according to the battery
type to be used. Dry cell batteries are set by
default. After turning the power on, set the battery
type via Function number 029 (page 21).
For details on how to check and change settings,
see page 20.
Alkaline Alkaline batteries, manganese dry
batteries
Ni-MH Rechargeable nickel metal hydride
batteries (rechargeable batteries)
NOTICE
• Failure to set the battery type may shorten the
amount of the battery life. Make sure to set the
battery type correctly.
Turning the Power On/Off
1 Turn down the [MASTER VOLUME] dial to
“MIN”.
2 Press the [ ] (Standby/On) switch to turn the
power on.
The Voice name will appear on the display.
Adjust the volume as desired while playing the
keyboard.
3 Press and hold the [ ] (Standby/On) switch for
about a second to turn the power off.
CAUTION
• Even when the power is turned off, electricity is still
flowing to the instrument in a small amount. Remove
the electric plug from the outlet when the instrument
is not to be used for extended periods of time or
during electrical storms.
NOTICE
• Press only the [ ] (Standby/On) switch when turning
the power on. Any other operations such as pressing
keyboards/buttons or stepping on the footswitch may
cause the instrument to malfunction.
Auto Power Off function
To prevent unnecessary power consumption, this
instrument features an Auto Power Off function
that automatically turns the power off if the
instrument is not operated for approximately 30
minutes by default; however, you can change this
setting (Function Number 028; page 21).
Easy deactivation of the Auto Power Off
function
Turn the power on while holding down the lowest
key on the keyboard. The message “oFF AutoOff”
will appear briefly, and then the instrument will
start up with the Auto Power Off function disabled.
Using the Music Rest
Insert the music rest into the slots as shown.
PSR-E283 YPT-280 Owner’s Manual
12
Panel Controls and Terminals
Front Panel
w
qt
!3
!5
!4
!6 !7
u
i o !0
!1
!2
!8 !9
@0
yr
e
About the alternate button names enclosed in the frame (SHIFT function)
If you operate one of the buttons while holding down !9, the function indicated in the frame below the
button will be executed. For example, holding down !9 and pressing [METRONOME] r calls up the Time
Signature setting display.
Display
q [ ] (Standby/On) switch ....................... page 11
Switches between standby and power on.
w [MASTER VOLUME] dial .........................page 11
Adjusts the overall volume.
e [DEMO] button
Starts/stops continuous DEMO song playback.
Sets the song group (Demo Group) for
continuous playback.
r [METRONOME] button
Starts/stops the metronome.
Determines the time signature of the
metronome.
t [TEMPO/TAP] button
Determines the tempo of the Song/Style/
metronome. While setting the tempo, the
icon is shown on the display, and you
can enter the tempo using the buttons in group
!4 as Number buttons.
When “Tempo” appears on the display, use the
Number buttons !4 or [+]/[-] !5 to adjust the
tempo value. Press [+] and [-] !5 simultaneously
to reset the tempo to the default value.
Tap Start
You can start playback of the Song or Style by
tapping this button at the required tempo: four
times for time signatures in 4, and three times
for time signatures in 3.
y [PHRASE REC] button ............................page 18
Records your performance.
u PART [L]/[R] buttons .............................. page 15
For selecting a lesson part or a muted part of
the current Song.
i [3-STEP LESSON] button ........................page 16
Starts/stops the 3-step lesson. Also used for
selecting the mode of the lesson.
o [SOUND QUIZ] button ...........................page 17
Starts/stops the Sound Quiz.
For selecting the level of the Sound Quiz.
!0 [MEMORY QUIZ] button ........................page 17
Starts/stops the Memory Quiz.
For selecting the type (mode) of the Memory
Quiz.
!1 Song control buttons ............................ page 15
For controlling Song playback.
!2 Style control buttons ............................ page 16
For controlling Style playback.
13
PSR-E283 YPT-280 Owner’s Manual
Panel Controls and Terminals
Front Panel
w
qt
!3
!5
!4
!6 !7
u
i o !0
!1
!2
!8 !9
@0
yr
e
About the alternate button names enclosed in the frame (SHIFT function)
If you operate one of the buttons while holding down !9, the function indicated in the frame below the
button will be executed. For example, holding down !9 and pressing [METRONOME] r calls up the Time
Signature setting display.
Display
!3 Mode selection buttons ................. page 14, 15
Calls up the selection displays for Voices, Songs,
and Styles, respectively, and switches to each
mode.
(One Touch Setting)
This automatically calls up the best Voice for
the selected Song or Style. When One Touch
Setting is enabled, the Voice number becomes
“000”.
!4 VOICE/SONG/STYLE Category buttons,
Number buttons [0] – [9] ................page 14, 15
For selecting the desired Voice/Song/Style or
directly entering setting values, etc.
!5 [+]/[-] buttons
For selecting items or setting values. Press and
hold either button to continuously increase
or decrease the value in the corresponding
direction. Press these buttons simultaneously
to reset the value to the default.
!6 [FUNCTION] button ...............................page 20
Calls up the Function setting display.
Calls up the icon on the display and
lets you use the !4 buttons as Number buttons.
!7 [SFX KIT] button ....................................page 14
Lets you play various sound effects from the
keyboard.
!8 [PORTABLE GRAND] button .................. page 14
Automatically selects Voice Number 001
“Grand Piano” for the Voice.
!9 button
Holding down this button and pressing another
button calls up the alternate function of that
button.
@0 SFX Kit illustrations ..............................page 14
These indicate the sound effects assigned
to each key when the SFX Kit is selected by
pressing [SFX KIT] !7.
Rear Panel
@1 [AUX IN] jack ..........................................page 14
For connecting an audio device such as a
smartphone.
@2 [PHONES/OUTPUT] jack
For connecting headphones and external
speakers.
@3 [SUSTAIN] jack
You can connect an optional footswitch and use
it as a sustain pedal.
@4 DC IN jack...............................................page 10
For connecting the AC adaptor.
PSR-E283 YPT-280 Owner’s Manual
14
Let’s Enjoy Playing the Keyboard!
About the button names
The names of buttons or parts on the panel
are enclosed in [ ]. The number after the
button name indicates the number in “Panel
Controls and Terminals” (pages 12-13).
For example, the DEMO button is referred to
as [DEMO] e in the text.
Selecting a Voice
1 Press [VOICE] !3.
2 Press the button of the desired
Voice from among the Category
buttons !4.
←VOICE category
Each time you press the button, it changes
to a different Voice within the same
category.
3 Play the keyboard.
Calling up the Grand Piano Voice
1 Press [PORTABLE GRAND] !8.
This instantly resets all of your settings,
and lets you play the piano sound with the
entire keyboard.
Playing Various Sound Effects
1 Press [SFX KIT] !7.
2 Play the keyboard.
A sound effect plays, one that corresponds
to the illustration @0 just above the key you
played.
Even if you play a key that does not have an
illustration above it, various sounds will be
produced.
15
PSR-E283 YPT-280 Owner’s Manual
Let’s Enjoy Playing the Keyboard!
Playing the Keyboard with Two People
(Duo Mode)
1 Press [FUNCTION] !6 repeatedly to
call up “DuoMode (024)”.
2 Press [+] !5 to turn it on.
024
on
DuoMode
on
F#3
Equivalent to C3 Equivalent to C3
Left player Right player
The keyboard is divided into left and right
sections with the F#3 key as a boundary,
and you can play the same range of notes
on the left and right.
3 To exit the Duo mode, call up
“DuoMode (024)” (see Step 1) and
press [-] !5 to set it to off.
Listening to the Preset Songs
1 Press [SONG] !3.
2 Press one of the Category buttons !4
to select the desired Song.
←SONG category
Each time you press the button, it changes
to a different Song within the same
category.
3 Press [START/STOP] !1 to play the
Song.
• You can change the tempo by pressing
[TEMPO/TAP] t.
• Press [L] or [R] u of [PART] to mute the
part and practice it.
4 Press [START/STOP] !1 to end Song
playback.
PSR-E283 YPT-280 Owner’s Manual
16
Let’s Enjoy Playing the Keyboard!
Practicing your Favorite Songs (3-Step
Lesson)
1 Select your favorite Song.
(Perform Step 1-2 of “Listening to the
Preset Songs.”)
2 Press [3-STEP LESSON] i the
number of times corresponding to
the lesson type (mode) that you
want to select.
• Once: A sample lesson will be played.
(Listening mode)
LISTEN
• Twice: Practice the timing to play the
keyboard. If the timing is right, the sound
shown on the display will be produced no
matter which key you play. (Timing mode)
TIMING
• 3 times: Practice playing the notes shown
on the display. Song playback will pause
until you press the correct key. (Waiting
mode)
WAITING
The selected lesson type is shown on the
display.
After the count sound, the intro will be
played, and the selected lesson will start.
If you play to the end of the song, your
score will be shown.
3 Press [START/STOP] !1 to exit the
lesson mode.
You can exit the lesson anytime, even while
it’s in progress.
Playing Along with Auto
accompaniment (Styles)
1 Press [STYLE] !3.
2 Press one of the Category buttons !4
to select the desired Style.
←STYLE category
Each time you press the button, it changes
to another Style within the same category.
3 Press [ACMP ON/OFF] !2 to turn
Auto Accompaniment on.
The left-hand range functions as the range
for chord recognition.
Split Point
Left-hand range
(Auto Accompaniment range)
4 Press [SYNC START] !2.
This enables the standby state for Auto
Accompaniment, and the Style starts when
you press a key in the left-hand range.
17
PSR-E283 YPT-280 Owner’s Manual
Let’s Enjoy Playing the Keyboard!
5 Press [INTRO/ENDING/rit.] !2.
This enables an Intro to play when the Auto
Accompaniment starts.
6 When you play the root note of the
first chord of the accompaniment
with one finger in the left-hand
range, the accompaniment will
start from the Intro.
7 Play the root note of the
accompaniment chords with your
left hand, and play the melody with
your right hand.
8 Press [INTRO/ENDING/rit.] !2.
After the Ending is played, the Auto
Accompaniment ends.
By pressing [INTRO/ENDING/rit.] !2 again
while the Ending is playing back, you
can finish with a slower playback speed
(ritardando).
Try Guessing the Sound! (Sound Quiz)
1 When you press [SOUND QUIZ] o,
fanfare music sounds, and the quiz
will start.
2 Find and play the same sound as
the sound produced by the
instrument.
If you get it right, move on to the next
question.
You have 3 chances to answer. Do your best
to guess the sound.
After answering all 10 questions, the quiz
will end and your score will be shown.
If you want to exit the quiz at any time,
press [SOUND QUIZ] o again.
Try the Memory Quiz!
Pass the quiz and master playing the melody!
1 When you press [MEMORY QUIZ] !0,
fanfare music sounds, and the quiz
will start.
2 After the example finishes playing,
play the notes.
The number of notes played for the
question increases with each correct
answer.
When you finish the quiz to the end, the
melody will be completed.
When you finish playing the melody to the
end, or when you make a mistake three
times on one question, the quiz ends and
your score is shown.
If you want to exit the quiz at any time,
press [MEMORY QUIZ] !0 again.
PSR-E283 YPT-280 Owner’s Manual
18
Let’s Enjoy Playing the Keyboard!
Play with Rhythm! (Rhythm Tutor)
1 Press [SONG] !3, and then press
[RHYTHM TUTOR] !4.
2 Press [START/STOP] !1 to start
Rhythm Tutor.
3 A mark will move across the top of
the display. Press the keyboard
when it reaches the rightmost end.
When the mark reaches here, press the keyboard.
If you play at the correct timing, the letters
“PAS” will be shown.
As long as your timing is right, any key you
play will be correct.
4 When the song ends, the score will
be shown.
Get into the rhythm and do your best to get
a perfect score of 100!
If you want to exit the Rhythm Tutor at any
time, press [START/STOP] !1.
Recording Your Performance
You can record your performance as a User
Song (Song No. 123), which can then be played
back on the instrument.
1 Press [PHRASE REC] y to enter
recording standby.
2 Play the keyboard or press
[START/STOP] !1 to start recording.
3 Press [START/STOP] !1 to stop
recording.
4 To play back the recorded Song,
press [START/STOP] !1.
NOTICE
• Never attempt to turn the power off or to connect
or disconnect the AC adaptor during recording.
Doing so can result in a loss of data.
NOTE
• Only one song can be recorded as the User Song.
When you record a new User Song, the User Song
that was saved before recording is erased and
overwritten.
• To delete the User Song, press [START/STOP]!1 again
after pressing [START/STOP]!1 in Step 2, without
playing any key.
• To play the recorded Song later, press [USER]!4 in
step 2 of “Listening to the Preset Songs”.
19
PSR-E283 YPT-280 Owner’s Manual
Let’s Enjoy Playing the Keyboard!
Playing Sound from Your Smartphone
or Other Audio Device
1 Turn off the power for both the
audio device and this instrument.
2 Connect the audio device to the
instrument’s [AUX IN] jack.
Use an audio cable having no (zero)
resistance, and is equipped with a stereo-
mini plug on one side for connecting to
the instrument, and an appropriate plug to
match the output jack of the audio device
on the other side.
Audio device
(Smartphone. etc.)
Stereo-mini plug
3 Turn on the audio device, and then
turn on the instrument.
4 Play back the connected audio
device.
The sound of the audio device will be
output through the speakers of the
instrument.
5 Adjust the volume balance between
the audio device and the instrument.
If possible, adjust the playback level of the
audio device first, to achieve the optimum
balance.
6 Stop playback on the audio device.
CAUTION
• Before connecting, turn off the power of both
this instrument and the external audio device.
Also, before turning the power on or off, make
sure to set all volume levels to the minimum (0).
Otherwise, damage to the devices, electrical
shock, or even permanent hearing loss may
occur.
NOTICE
• To avoid possible damage to the external audio
device and this instrument, first turn on the
power to the external audio device, and then
turn on the power to the instrument. Reverse this
order when you turn the power off.
PSR-E283 YPT-280 Owner’s Manual
20
Let’s Enjoy Playing the Keyboard!
About the Function Settings
The function settings provide access to various detailed instrument parameters including Tuning, Split
Point, Voices, Effects, and battery type.
1 Press [FUNCTION] !6 repeatedly until the desired item appears.
001
000
Transpos
01001
Current value Function Name
Function Number
To decrease the Function Number by one, simultaneously hold down [FUNCTION] !6 and press [-] !5
briefly.
Simply pressing only [+] or [-] !5 does not change the Function Number.
2 Set the value by using the Number buttons !4 or [+]/[-] !5 buttons.
Press [+] and [-] !5 simultaneously to restore the default setting.
NOTE
• When setting functions, the icon automatically lights up, and you can use the VOICE/SONG/STYLE Category
buttons !4 as Number buttons !4 to change the setting value.
3 To exit the function settings, press one of these buttons: [VOICE], [SONG] or
[STYLE] !3.
Function List
Function Number Function Name Display Range/Settings Default Value
Overall
001 Transpose Transpos -12–12 0
002 Tuning Tuning 427.0Hz–453.0Hz 440.0Hz
003 Split Point SplitPnt 036–096 (C1–C6) 054 (F#2)
Voice (page 14)
004 Volume M.Volume 000–127 *
005 Octave M.Octave -2–2 *
006 Reverb Level M.Reverb 000–127 *
007 Chorus Depth M.Chorus 000–127 *
Style (page 16)
008 Style Volume StyleVol 000–127 100
009 Fingering Type FingType 1 (SmartChd)
2 (Multi)
1 (SmartChd)
010 Smart Chord Key S.ChdKey FL7 (7 Flats b) –
SP0 (No Key Signature) –
SP7 (7 Sharps #)
SP0 (No Key Signature)
Song (page 15)
011 Song Volume SongVol 000–127 100
012 Song Melody Voice MelodyVc 001–410 **
Effect
013 Reverb Type Reverb 01–03 (Hall 1–3)
04–05 (Room 1–2)
06–07 (Stage 1–2)
08–09 (Plate 1–2)
10 (Off)
**
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Yamaha PSR-E283 Le manuel du propriétaire

Yamaha
Marque
Yamaha
Modèle
PSR-E283
Taper
Le manuel du propriétaire
Ce manuel convient également à
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes