Aeg-Electrolux AGS58800S0 Manuel utilisateur

AGS58800S0

EN

FREEZER USER MANUAL 2

FR

CONGÉLATEUR NOTICE D'UTILISATION 21

DE

GEFRIERGERÄT BENUTZERINFORMATION 41

ES

CONGELADOR MANUAL DE INSTRUCCIONES 61

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have

created it to give you impeccable performance for many

years, with innovative technologies that help make life

simpler – features you might not find on ordinary

appliances. Please spend a few minutes reading to get

the very best from it.

ACCESSORIES AND CONSUMABLES

In the AEG webshop, you’ll find everything you need to

keep all your AEG appliances looking spotless and

working perfectly. Along with a wide range of

accessories designed and built to the high quality

standards you would expect, from specialist cookware

to cutlery baskets, from bottle holders to delicate

laundry bags…

Visit the webshop at:

www.aeg-electrolux.com/shop

2

CONTENTS

4 Safety information

7 Control panel

8First use

8Daily use

9 Helpful Hints and Tips

10 Care and cleaning

12 What to do if…

13 Technical data

14 Installation

19 Environmental concerns

The following symbols are used in this

user manual:

Important information concerning

your personal safety and information

on how to avoid damaging the

appliance.

General information and tips

Environmental information

Subject to change without notice

Contents

3

SAFETY INFORMATION

In the interest of your safety and to ensure the correct use, before installing and first

using the appliance, read this user manual carefully, including its hints and warnings. To

avoid unnecessary mistakes and accidents, it is important to ensure that all people using

the appliance are thoroughly familiar with its operation and safety features. Save these

instructions and make sure that they remain with the appliance if it is moved or sold, so

that everyone using it through its life will be properly informed on appliance use and safety.

For the safety of life and property keep the precautions of these user's instructions as the

manufacturer is not responsible for damages caused by omission.

Children and vulnerable people safety

• This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

• Keep all packaging well away from children. There is risk of suffocation.

• If you are discarding the appliance pull the plug out of the socket, cut the connection

cable (as close to the appliance as you can) and remove the door to prevent playing

children to suffer electric shock or to close themselves into it.

• If this appliance featuring magnetic door seals is to replace an older appliance having

a spring lock (latch) on the door or lid, be sure to make that spring lock unusable be-

fore you discard the old appliance. This will prevent it from becoming a death trap for

a child.

General safety

CAUTION!

Keep ventilation openings clear of obstruction.

• The appliance is intended for keeping foodstuff and/or beverages in a normal house-

hold as explained in this instruction booklet.

• Do not use a mechanical device or any artificial means to speed up the thawing process.

• Do not use other electrical appliances (such as ice cream makers) inside of refrigerat-

ing appliances, unless they are approved for this purpose by the manufacturer.

• Do not damage the refrigerant circuit.

• The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the ap-

pliance, a natural gas with a high level of environmental compatibility, which is never-

theless flammable.

During transportation and installation of the appliance, be certain that none of the

components of the refrigerant circuit become damaged.

If the refrigerant circuit should become damaged:

– avoid open flames and sources of ignition

– thoroughly ventilate the room in which the appliance is situated

4

Safety information

• It is dangerous to alter the specifications or modify this product in any way. Any dam-

age to the cord may cause a short-circuit, fire and/or electric shock.

WARNING!

Any electrical component (power cord, plug, compressor) must be replaced by a certified

service agent or qualified service personnel.

1. Power cord must not be lengthened.

2. Make sure that the power plug is not squashed or damaged by the back of the

appliance. A squashed or damaged power plug may overheat and cause a fire.

3. Make sure that you can come to the mains plug of the appliance.

4. Do not pull the mains cable.

5. If the power plug socket is loose, do not insert the power plug. There is a risk of

electric shock or fire.

6.

You must not operate the appliance without the lamp cover

1)

of interior lighting.

• This appliance is heavy. Care should be taken when moving it.

• Do not remove nor touch items from the freezer compartment if your hands are damp/

wet, as this could cause skin abrasions or frost/freezer burns.

• Avoid prolonged exposure of the appliance to direct sunlight.

•

Bulb lamps

2)

used in this appliance are special purpose lamps selected for household

appliances use only. They are not suitable for household room illumination.

Daily Use

• Do not put hot pot on the plastic parts in the appliance.

• Do not store flammable gas and liquid in the appliance, because they may explode.

•

Do not place food products directly against the air outlet on the rear wall.

3)

• Frozen food must not be re-frozen once it has been thawed out.

• Store pre-packed frozen food in accordance with the frozen food manufacturer's in-

structions.

• Appliance's manufacturers storage recommendations should be strictly adhered to. Re-

fer to relevant instructions.

• Do not place carbonated or fizzy drinks in the freezer compartment as it creates pres-

sure on the container, which may cause it to explode, resulting in damage to the appli-

ance.

• Ice lollies can cause frost burns if consumed straight from the appliance.

Care and cleaning

• Before maintenance, switch off the appliance and disconnect the mains plug from the

mains socket.

• Do not clean the appliance with metal objects.

• Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.

1) If the lamp cover is foreseen

2) If the lamp is foreseen

3) If the appliance is Frost Free

Safety information

5

Installation

For electrical connection carefully follow the instructions given in specific paragraphs.

• Unpack the appliance and check if there are damages on it. Do not connect the appli-

ance if it is damaged. Report possible damages immediately to the place you bought

it. In that case retain packing.

• It is advisable to wait at least four hours before connecting the appliance to allow the

oil to flow back in the compressor.

• Adequate air circulation should be around the appliance, lacking this leads to overheat-

ing. To achieve sufficient ventilation follow the instructions relevant to installation.

• Wherever possible the back of the product should be against a wall to avoid touching

or catching warm parts (compressor, condenser) to prevent possible burn.

• The appliance must not be located close to radiators or cookers.

• Make sure that the mains plug is accessible after the installation of the appliance.

•

Connect to potable water supply only.

4)

Service

• Any electrical work required to do the servicing of the appliance should be carried out

by a qualified electrician or competent person.

• This product must be serviced by an authorized Service Centre, and only genuine spare

parts must be used.

Environment Protection

This appliance does not contain gasses which could damage the ozone layer, in either its

refrigerant circuit or insulation materials. The appliance shall not be discarded together

with the urban refuse and rubbish. The insulation foam contains flammable gases: the

appliance shall be disposed according to the applicable regulations to obtain from your

local authorities. Avoid damaging the cooling unit, especially at the rear near the heat

exchanger. The materials used on this appliance marked by the symbol

are recyclable.

4) If a water connection is foreseen

6

Safety information

CONTROL PANEL

1 2 3 54

1 Pilot light

2 Temperature regulator

3 FROSTMATIC light

4 FROSTMATIC switch

Acoustic alarm reset switch

5 Alarm light

Switching on

1. Insert the plug into the wall socket.

2. Turn the Temperature regulator clockwise to a medium setting.

3. The Pilot light will light up and a sound is on only for 2 sec. indicating that the appli-

ance is powered.

4. The Alarm light will blink and the sound signal alarm will get on, indicating that the

temperature inside the appliance is too high.

5. Push the FROSTMATIC switch and the sound signal alarm will get off.

6. Push the FROSTMATIC switch once again and the FROSTMATIC light will light up. The

freezer will start to operate.

Switching off

1. To turn off the appliance, turn the Temperature regulator to the "O" position and a

sound is on only for 2 sec.

2. The pilot light will switch off.

Temperature regulation

The temperature within the appliance is controlled by the Temperature regulator situ-

ated at the top of the cabinet.

To operate the appliance, proceed as follows:

• turn the Temperature regulator toward lower settings to obtain the minimum coldness.

• turn the Temperature regulator toward higher settings to obtain the maximum coldness.

A medium setting is generally the most suitable.

However, the exact setting should be chosen keeping in mind that the temperature in-

side the appliance depends on:

• room temperature

• how often the door is opened

• the quantity of food stored

Control panel

7

• the location of the appliance.

FROSTMATIC function

The FROSTMATIC function accelerates the freezing of fresh food and, at the same time,

protects foodstuffs already stored from undesirable warming.

To activate the function, do these steps:

1. Press the FROSTMATIC switch.

2. The FROSTMATIC light will switch off.

To deactivate the function, do these steps:

1. Press the FROSTMATIC switch.

2. The FROSTMATIC light goes out.

The FROSTMATIC function stops automatically after about 52 hours.

Excessive temperature alarm

If the temperature inside the freezer has risen to a point where the safe storage of fro-

zen food is no longer ensured (for example due to an power failure) the Alarm light will

blink and an acoustic alarm will sound.

1. Switch off the warning tone by pressing the FROSTMATIC switch.

The Alarm light blinks until the required temperature has been reached again.

When the freezer is first switched on, the Alarm light blinks until the temperature has

dropped to a safe level for the storage of frozen food.

FIRST USE

Cleaning the interior

Before using the appliance for the first time, wash the interior and all internal accesso-

ries with lukewarm water and some neutral soap so as to remove the typical smell of a

brand-new product, then dry thoroughly.

Do not use detergents or abrasive powders, as these will damage the finish.

DAILY USE

Freezing fresh food

The freezer compartment is suitable for freezing fresh food and storing frozen and deep-

frozen food for a long time.

To freeze fresh food activate the FROSTMATIC function at least 24 hours before placing

the food to be frozen in the freezer compartment.

Place the fresh food to be frozen in the two top compartments.

The maximum amount of food that can be frozen in 24 hours is specified on the rating

plate , a label located on the inside of the appliance.

The freezing process lasts 24 hours: during this period do not add other food to be frozen.

8

First use

To utilize the maximum quantity indicated on the rating plate, remove all the drawers

from the freezer compartment.

To guarantee the best functionality and perform-

ance of the appliance, the food must be not

placed in contact with the back wall of the freez-

er in the area as shown in the figure.

Storage of frozen food

When first starting-up or after a period out of use, before putting the products in the

compartment let the appliance run at least 2 hours on the higher settings.

In the event of accidental defrosting, for example due to a power failure, if the power

has been off for longer than the value shown in the technical characteristics chart under

"rising time", the defrosted food must be consumed quickly or cooked immediately and

then re-frozen (after cooling).

Thawing

Deep-frozen or frozen food, prior to being used, can be thawed in the refrigerator com-

partment or at room temperature, depending on the time available for this operation.

Small pieces may even be cooked still frozen, directly from the freezer: in this case, cook-

ing will take longer.

Ice-cube production

This appliance is equipped with one or more trays for the production of ice-cubes. Fill

these trays with water, then put them in the freezer compartment.

Do not use metallic instruments to remove the trays from the freezer.

HELPFUL HINTS AND TIPS

Hints for freezing

To help you make the most of the freezing process, here are some important hints:

• the maximum quantity of food which can be frozen in 24 hrs. is shown on the rating

plate;

Helpful Hints and Tips

9

• the freezing process takes 24 hours. No further food to be frozen should be added dur-

ing this period;

• only freeze top quality, fresh and thoroughly cleaned, foodstuffs;

• prepare food in small portions to enable it to be rapidly and completely frozen and to

make it possible subsequently to thaw only the quantity required;

• wrap up the food in aluminium foil or polythene and make sure that the packages are

airtight;

• do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding

a rise in temperature of the latter;

• lean foods store better and longer than fatty ones; salt reduces the storage life of food;

• water ices, if consumed immediately after removal from the freezer compartment, can

possibly cause the skin to be freeze burnt;

• it is advisable to show the freezing in date on each individual pack to enable you to

keep tab of the storage time.

Hints for storage of frozen food

To obtain the best performance from this appliance, you should:

• make sure that the commercially frozen foodstuffs were adequately stored by the re-

tailer;

• be sure that frozen foodstuffs are transferred from the foodstore to the freezer in the

shortest possible time;

• not open the door frequently or leave it open longer than absolutely necessary.

• Once defrosted, food deteriorates rapidly and cannot be refrozen.

• Do not exceed the storage period indicated by the food manufacturer.

CARE AND CLEANING

CAUTION!

Unplug the appliance before carrying out any maintenance operation.

This appliance contains hydrocarbons in its cooling unit; maintenance and recharging

must therefore only be carried out by authorized technicians.

Periodic cleaning

The equipment has to be cleaned regularly:

• clean the inside and accessories with lukewarm water and some neutral soap.

• regularly check the door seals and wipe clean to ensure they are clean and free from

debris.

• rinse and dry thoroughly.

Do not pull, move or damage any pipes and/or cables inside the cabinet.

Never use detergents, abrasive powders, highly perfumed cleaning products or wax pol-

ishes to clean the interior as this will damage the surface and leave a strong odour.

10

Care and cleaning

Clean the condenser (black grill) and the compressor at the back of the appliance with a

brush or a vacuum cleaner. This operation will improve the performance of the appliance

and save electricity consumption.

Take care of not to damage the cooling system.

Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the

plastics used in this appliance. For this reason it is recommended that the outer casing of

this appliance is only cleaned with warm water with a little washing-up liquid added.

After cleaning, reconnect the equipment to the mains supply.

Defrosting the freezer

A certain amount of frost will always form on the freezer shelves and around the top

compartment.

Defrost the freezer when the frost layer reaches a thickness of about 3-5 mm.

About 12 hours prior to defrosting, set the Temperature regulator toward higher set-

tings , in order to build up sufficient chill reserve for the interruption in operation.

To remove the frost, follow the instructions below:

1. Switch off the appliance.

2. Remove any stored food, wrap it in several layers of newspaper and put it in a cool

place.

CAUTION!

Do not touch frozen goods with wet hands. Hands can freeze to the goods.

3. Leave the door open and insert the plas-

tic scraper in the appropriate seating at

the bottom centre, placing a basin under-

neath to collect the defrost water

In order to speed up the defrosting process,

place a pot of warm water in the freezer com-

partment. In addition, remove pieces of ice

that break away before defrosting is complete.

4. When defrosting is completed, dry the in-

terior thoroughly and keep the scraper

for future use.

5. Switch on the appliance.

6. After two or three hours, reload the previously removed food into the compartment.

Never use sharp metal tools to scrape off frost from the evaporator as you could damage

it.

Do not use a mechanical device or any artificial means to speed up the thawing process

other than those recommended by the manufacturer.

A temperature rise of the frozen food packs, during defrosting, may shorten their safe

storage life.

Care and cleaning

11

Periods of non-operation

When the appliance is not in use for long periods, take the following precautions:

•

disconnect the appliance from electricity supply

• remove all food

•

defrost

5)

and clean the appliance and all accessories

• leave the door/doors ajar to prevent unpleasant smells.

If the cabinet will be kept on, ask somebody to check it once in a while to prevent the

food inside from spoiling in case of a power failure.

WHAT TO DO IF…

WARNING!

Before troubleshooting, disconnect the mains plug from the mains socket.

Only a qualified electrician or competent person must do the troubleshooting that is not

in this manual.

There are some sounds during normal use (compressor, refrigerant circulation).

Problem Possible cause Solution

The appliance does not op-

erate. The Pilot light does

not flash.

The appliance is switched off. Switch on the appliance.

The mains plug is not connec-

ted to the mains socket correct-

ly.

Connect the mains plug to the

mains socket correctly.

The appliance has no power.

There is no voltage in the mains

socket.

Connect a different electrical ap-

pliance to the mains socket.

Contact a qualified electrician.

The Pilot light flashes.

The appliance is not working

properly.

Contact a qualified electrician.

The Alarm light flashes.

The temperature in the freezer

is too high.

Refer to "High temperature

alarm"

The compressor operates

continually.

The temperature is not set cor-

rectly.

Set a higher temperature.

The door is not closed correctly. Refer to "Closing the door".

The door has been opened too

frequently.

Do not keep the door open lon-

ger than necessary.

The product temperature is too

high.

Let the product temperature de-

crease to room temperature be-

fore storage.

The room temperature is too

high.

Decrease the room temperature.

5) If foreseen.

12

What to do if…

Problem Possible cause Solution

The FROSTMATIC function is

switched on.

Refer to "FROSTMATIC function".

The temperature in the

freezer is too low.

The temperature regulator is

not set correctly.

Set a higher temperature.

The FROSTMATIC function is

switched on.

Refer to "FROSTMATIC function".

The temperature in the

freezer is too high.

The temperature regulator is

not set correctly.

Set a lower temperature.

The door is not closed correctly. Refer to "Closing the door".

The product temperature is too

high.

Let the product temperature de-

crease to room temperature be-

fore storage.

Many products are stored at

the same time.

Store less products at the same

time.

Products are too near to each

other.

Store products so that there is

cold air circulation.

There is too much frost.

Food is not wrapped correctly. Wrap the food correctly.

The door is not closed correctly. Refer to "Closing the door".

The temperature regulator is

not set correctly.

Set a higher temperature.

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to "Installation".

3. If necessary, replace the defective door gaskets. Contact the Service Center.

TECHNICAL DATA

Dimension of the recess

Height 880 mm

Width 560 mm

Depth 550 mm

Rising Time 20 h

The technical information are situated in the rating plate on the internal left side of the

appliance and in the energy label.

Technical data

13

INSTALLATION

Positioning

WARNING!

If you are discarding an old appliance that has a lock or catch on the door, you must

ensure that it is made unusable to prevent young children being trapped inside.

The appliance shall have the plug accessible after installation.

Install this appliance at a location where the ambient temperature corresponds to the

climate class indicated on the rating plate of the appliance:

Climate class Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the rating plate cor-

respond to your domestic power supply.

The appliance must be earthed. The power supply cable plug is provided with a contact

for this purpose. If the domestic power supply socket is not earthed, connect the appli-

ance to a separate earth in compliance with current regulations, consulting a qualified

electrician.

The manufacturer declines all responsibility if the above safety precautions are not ob-

served.

This appliance complies with the E.E.C. Directives.

Door reversibility

The door of the appliance opens to the right. If you want to open the door to the left,

follow these steps before you install the appliance:

1. Loosen and remove the upper pin.

2. Remove the door.

3. Remove the spacer.

14

Installation

4. With a key, loosen the lower pin.

On the opposite side:

1. Tighten the lower pin.

2. Install the spacer.

3. Install the door.

4. Tighten the upper pin.

Ventilation requirements

The airflow behind the appliance must be suffi-

cient.

Installing the appliance

CAUTION!

Make sure that the mains cable can move freely.

Do the following steps:

1. If necessary cut the adhesive sealing

strip and then apply it to the appliance

as shown in figure.

50 mm

min.

200 cm

2

min.

200 cm

2

x

Installation

15

2. Install the appliance in the niche.

Push the appliance in the direction of

the arrow (1) until the upper gap cover

stops against the kitchen furniture.

Push the appliance in the direction of

the arrow (2) against the cupboard on

the opposite side of the hinge.

3. Adjust the appliance in the niche.

The lower hinge cover (in the accesso-

ries bag) makes sure that the distance

between the appliance and the kitchen

furniture is correct.

Make sure that the distance between

the appliance and the cupboard front-

edge is 44 mm.

Make sure that the clearance between

the appliance and the cupboard is 4 mm.

Open the door. Put lower hinge cover

in position.

4. Attach the appliance to the niche with 4

screws.

1

2

44mm

4mm

I

16

Installation

5. Remove the correct part from the

hinge cover (E). Make sure to remove

the part DX, in the case of right hinge,

SX in opposite case.

6. Attach the covers (C, D) to the lugs and

the hinge holes.

Install the vent grille (B).

Attach the hinge covers (E) to the hinge.

7. Disconnect the parts (Ha), (Hb), (Hc)

and (Hd).

B

E

D

C

Installation

17

8. Install the part (Ha) on the inner side

of the kitchen furniture.

9. Push the part (Hc) on the part (Ha).

10. Open the appliance door and the kitch-

en furniture door at an angle of 90°.

Insert the small square (Hb) into guide

(Ha).

Put together the appliance door and

the furniture door and mark the holes.

ca. 50 mm

21 mm

90°

21 mm

Ha

Hc

Ha

Hb

8 mm

18

Installation

11. Remove the brackets and mark a dis-

tance of 8 mm from the outer edge of

the door where the nail must be fitted

(K).

12. Place the small square on the guide

again and fix it with the screws supplied.

Align the kitchen furniture door and

the appliance door by adjusting the

part Hb.

13. Press the part (Hd) on the part (Hb).

Do a final check to make sure that:

• All screws are tightened.

• The sealing strip is attached tightly to the

cabinet.

• The door opens and closes correctly.

ENVIRONMENTAL CONCERNS

The symbol on the product or on its packaging indicates that this product may not

be treated as household waste. Instead it should be taken to the appropriate collection

point for the recycling of electrical and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential negative consequences for the

environment and human health, which could otherwise be caused by inappropriate

waste handling of this product. For more detailed information about recycling of this

Ha

K

8 mm

Hb

Hd

Environmental concerns

19

product, please contact your local council, your household waste disposal service or the

shop where you purchased the product.

20

Environmental concerns

La page est en cours de chargement...

Aeg-Electrolux AGS58800S0 Manuel utilisateur

Aeg-Electrolux AGS58800S0 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents