Roper Dishwasher RUD8050S Manuel utilisateur

Marque: Roper

Modèle: Dishwasher RUD8050S

Catégorie: Lave-vaisselle

Taper: Manuel utilisateur

Ce manuel convient également à

RUD8050S

UNDERCOUNTER

DISHWASHER

Use & Care Guide

For questions about features, operation/performance,

parts, accessories or service, call: 1-800-44-ROPER (1-800-447-6737).

or visit our website at

www.roperappliances.com

In Canada, for assistance, installation or service,

call: 1-800-807-6777

or visit our website at

www.roper.ca

LAVE-VAISSELLE

ENCASTRÉ

Guide d’utilisation

et d’entretien

Au Canada, pour assistance, installation ou service,

composez le 1-800-807-6777

ou visitez notre site web à

www.roper.ca

Table of Contents/Table des matières .........2

W10073780

Model/Modèle RUD8050S

TABLE OF CONTENTS

DISHWASHER SAFETY .................................................................3

Before Using Your Dishwasher....................................................4

PARTS AND FEATURES................................................................5

START-UP GUIDE ..........................................................................6

Using Your New Dishwasher .......................................................6

Stopping Your Dishwasher ..........................................................6

DISHWASHER LOADING..............................................................6

Loading Suggestions ...................................................................6

Loading Top Rack........................................................................7

Loading Bottom Rack ..................................................................7

Loading Silverware Basket ..........................................................8

DISHWASHER USE........................................................................8

Detergent Dispenser ....................................................................8

Rinse Aid Dispenser.....................................................................9

Dishwasher Efficiency Tips ........................................................10

Cycle Selection Charts...............................................................10

Canceling a Cycle ......................................................................11

Changing a Cycle or Setting ......................................................11

Adding Items During a Cycle .....................................................11

Option Selections.......................................................................11

Cycle Status Indicators..............................................................12

Sensor System...........................................................................12

Drying System............................................................................12

Overfill Protection Float..............................................................12

WASHING SPECIAL ITEMS.........................................................13

DISHWASHER CARE ...................................................................14

Cleaning......................................................................................14

Drain Air Gap..............................................................................14

Storing........................................................................................14

TROUBLESHOOTING ..................................................................15

ASSISTANCE OR SERVICE.........................................................17

In the U.S.A. ...............................................................................17

In Canada ...................................................................................17

WARRANTY ..................................................................................18

TABLE DES MATIÈRES

SÉCURITÉ DU LAVE-VAISSELLE...............................................19

Avant d’utiliser le lave-vaisselle .................................................20

PIÈCES ET CARACTÉRISTIQUES ..............................................21

GUIDE DE MISE EN MARCHE ....................................................22

Utilisation de votre nouveau lave-vaisselle................................22

Arrêt du lave-vaisselle ................................................................22

CHARGEMENT DU LAVE-VAISSELLE .......................................22

Suggestions de chargement......................................................22

Chargement du panier supérieur ...............................................23

Chargement du panier inférieur .................................................23

Chargement du panier à couverts .............................................24

UTILISATION DU LAVE-VAISSELLE...........................................24

Distributeur de détergent ...........................................................24

Distributeur d'agent de rinçage..................................................25

Conseils d’efficacité pour le lave-vaisselle ................................26

Tableaux de sélection de programmes .....................................26

Annulation d’un programme ......................................................27

Changement d’un programme ou réglage ................................27

Addition de vaisselle durant un programme..............................28

Sélection d’options.....................................................................28

Indicateurs d’état d’avancement du programme ......................29

Système de détection ................................................................29

Système de séchage..................................................................29

Dispositif de protection contre le débordement........................29

LAVAGE D’ARTICLES SPÉCIAUX ..............................................30

ENTRETIEN DU LAVE-VAISSELLE.............................................31

Nettoyage ...................................................................................31

Dispositif anti-refoulement .........................................................31

Remisage....................................................................................31

DÉPANNAGE.................................................................................32

ASSISTANCE OU SERVICE.........................................................34

GARANTIE.....................................................................................35

DISHWASHER SAFETY

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

When using the dishwasher, follow basic precautions, including the following:

SAVE THESE INSTRUCTIONS

■

Read all instructions before using the dishwasher.

■

Use the dishwasher only for its intended function.

■

Use only detergents or rinse agents recommended for use

in a dishwasher, and keep them out of the reach of children.

■

When loading items to be washed:

1) Locate sharp items so that they are not likely to damage

the door seal; and

2) Load sharp knives with the handles up to reduce the risk

of cut-type injuries.

■

Do not wash plastic items unless they are marked

“dishwasher safe” or the equivalent. For plastic items not so

marked, check the manufacturer's recommendations.

■

Do not touch the heating element during or immediately

after use.

■

Do not operate the dishwasher unless all enclosure panels

are properly in place.

■

Do not tamper with controls.

■

Do not abuse, sit on, or stand on the door, lid, or dish racks

of the dishwasher.

■

To reduce the risk of injury, do not allow children to play in

or on the dishwasher.

■

Under certain conditions, hydrogen gas may be produced in

a hot water system that has not been used for two weeks or

more. HYDROGEN GAS IS EXPLOSIVE. If the hot water

system has not been used for such a period, before using

the dishwasher turn on all hot water faucets and let the

water flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is flammable,

do not smoke or use an open flame during this time.

■

Remove the door or lid to the washing compartment

when removing an old dishwasher from service or

discarding it.

Before Using Your Dishwasher

■ Install where dishwasher is protected from the elements.

Protect against freezing to avoid possible rupture of fill valve.

Such ruptures are not covered by the warranty. See “Storing”

section for winter storage information.

■ Install and level dishwasher on a floor that will hold the

weight, and in an area suitable for its size and use.

■ Remove all shipping plugs from hoses and connectors (such

as the cap on the drain outlet) before installing. See

Installation Instructions for complete information.

WARNING

Tip Over Hazard

Do not use dishwasher until completely installed.

Do not push down on open door.

Doing so can result in serious injury or cuts.

WARNING

Electrical Shock Hazard

Electrically ground dishwasher.

Connect ground wire to green ground connector in

terminal box.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

■

For a grounded, cord-connected dishwasher:

The dishwasher must be grounded. In the event of a

malfunction or breakdown, grounding will reduce the

risk of electric shock by providing a path of least

resistance for electric current. The dishwasher is

equipped with a cord having an equipment-grounding

conductor and a grounding plug. The plug must be

plugged into an appropriate outlet that is installed and

grounded in accordance with all local codes and

ordinances.

WARNING: Improper connection of the

equipment-grounding conductor can result in a risk of

electric shock. Check with a qualified electrician or

service representative if you are in doubt whether the

dishwasher is properly grounded. Do not modify the

plug provided with the dishwasher; if it will not fit the

outlet, have a proper outlet installed by a qualified

electrician.

■

For a permanently connected dishwasher:

The dishwasher must be connected to a grounded

metal, permanent wiring system, or an equipment-

grounding conductor must be run with the circuit

conductors and connected to the equipment-

grounding terminal or lead on the dishwasher.

GROUNDING INSTRUCTIONS

SAVE THESE INSTRUCTIONS

PARTS AND FEATURES

A. Upper level wash

B. Top rack

C. Lower spray arm

D. Bottom rack

E. Model and serial number label

F. Heating element

G. Water inlet opening (in tub wall)

H. Silverware basket

I. Detergent dispenser

J. Vent

K. Top spray arm

L. Filter module

M. Overfill protection float

N. Rinse aid dispenser

Control Panel

START-UP GUIDE

Before using your dishwasher, remove all packaging materials. Read this entire Use and Care Guide. You will find important safety

information and useful operating tips.

Using Your New Dishwasher

1. Scrape large food soil and hard items (toothpicks or bones)

from dishes.

2. Properly load the dishwasher. (See “Dishwasher Loading.”)

Make sure nothing keeps the spray arm(s) from spinning

freely.

3. Add detergent and check the rinse aid dispenser. Add rinse

aid if needed. (See “Dishwasher Use.”)

4. Push door firmly closed. The door latches automatically. Run

hot water at the sink nearest your dishwasher until the water

is hot. (See “Dishwasher Efficiency Tips.”) Turn off water.

5. Select the desired cycle and options. (See “Dishwasher

Use.”)

6. Press START/RESUME.

NOTE: If the door is opened during a cycle or the power is

interrupted, the Start/Resume indicator flashes. The cycle will not

resume until the door is closed, and Start/Resume is pressed.

Stopping Your Dishwasher

You can stop your dishwasher anytime during a cycle.

1. Open the door slightly.

2. Wait for the spraying action to stop. Then open the door all

the way, if needed.

Close the door and press START/RESUME to continue the cycle.

Press CANCEL/DRAIN. A 2-minute drain starts.

DISHWASHER LOADING

Loading Suggestions

■ Remove leftover food, bones, toothpicks and other hard

items from the dishes. It is not necessary to rinse the dishes

before putting them into the dishwasher. The wash module

removes food particles from the water. The module contains a

chopping device which will reduce the size of food items.

NOTE: If hard items such as fruit seeds, nuts, and eggshells

enter the wash module, you might hear chopping, grinding,

crunching, or buzzing sounds. These sounds are normal

when hard items enter the module. To avoid damage to the

dishwasher, do not let metallic items (such as pot handle

screws) get into the wash module.

■ It is important for the water spray to reach all soiled surfaces.

■ Load dishes so they are not stacked or overlapping, if

possible. For best drying, water must be able to drain from all

surfaces.

■ Make sure pot lids and handles, pizza pans, cookie sheets,

etc., do not interfere with the spray arm rotation.

■ Run a rinse cycle to keep dishes moist if you do not plan to

wash them soon. Foods such as eggs, rice, pasta, spinach,

and cooked cereals may be hard to remove if they are left to

dry over a period of time.

Quiet operating tips

To avoid thumping/clattering noises during operation:

■ Make sure lightweight load items are secured in the racks.

■ Make sure pot lids and handles, pizza pans, cookie sheets,

etc., do not touch interior walls or interfere with the rotation of

the spray arm.

■ Load dishes so they do not touch one another.

NOTE: For built-in models, keep sink drain plugs closed during

dishwasher operation to avoid noise transfer through drains.

Loading Top Rack

The top rack is designed for cups, glasses, and smaller items.

Many items, up to 9" (22 cm), fit in the top rack. (See

recommended loading patterns shown.)

NOTE: The features on your dishwasher rack may vary from the

drawings shown.

■ Place items so open ends face down for cleaning and

draining.

■ Load glasses in top rack only. The bottom rack is not

designed for glasses. Damage can occur.

■ Place cups and glasses in the rows between tines. Placing

them over the tines can lead to breakage and water spots.

■ China, crystal, and other delicate items must not touch each

other during dishwasher operation. Damage may occur.

■ Load lightweight plastic items in the top rack only. Only

plastic items marked “dishwasher safe” are recommended.

■ Load plastic items so the force of the spray does not move

them during the cycle.

■ To avoid chipping, do not let stemware touch other items.

■ Small bowls, pans, and other utensils can be placed in the

top rack. Load bowls in the center section for best stability.

Loading Bottom Rack

The bottom rack is designed for plates, pans, casseroles, and

utensils. Many items, up to 13" (33 cm) tall, fit in the bottom rack.

(See recommended loading patterns shown.)

NOTE: The features on your dishwasher rack may vary from the

drawings shown.

■ Do not load glasses, cups, or plastic items in the bottom

rack. Load small items in the bottom rack only if they are

secured in place.

■ Load plates, soup bowls, etc., between tines.

■ Overlap the edges of plates for large loads.

■ Load soup, cereal, and serving bowls in the rack in a variety

of ways depending upon their size and shape. Load bowls

securely between the rows of tines. Do not nest bowls

because the spray will not reach all surfaces.

■ Load cookie sheets, cake pans, and other large items at the

sides and back. Loading such items in front can keep the

water spray from reaching the detergent dispenser.

■ Secure heavily soiled cookware face down in the rack.

■ Make sure pot handles and other items do not stop rotation

of the spray arm(s). The spray arm(s) must move freely.

■ Do not load items between the bottom rack and the side of

the dishwasher tub because they might block the water inlet

opening.

10 place setting

Utensil load

Mixed load

Loading Silverware Basket

Load the silverware basket while it is in the dishwasher or take

the basket out for loading on a counter or table top.

NOTE: Unload or remove the basket before unloading the racks

to avoid spilling water droplets onto the silverware.

Mix items in each section of the basket with some pointing up

and some down to avoid nesting. Spray cannot reach nested

items.

IMPORTANT: Always load items (knives, skewers, etc.) pointing

down.

NOTES:

■ Do not load silver or silver-plated silverware with stainless

steel. These metals can be damaged by contact with each

other during washing.

■ Some foods (such as salt, vinegar, milk products, fruit juices,

etc.) can pit or corrode silverware. Run a rinse cycle if you do

not have a full load to wash immediately.

DISHWASHER USE

Detergent Dispenser

The detergent dispenser has two sections. The smaller Pre-Wash

section empties detergent into the dishwasher when you close

the door. The larger Main Wash section automatically empties

detergent into the dishwasher during the wash. (See the “Cycle

Selection Charts.”)

■ Use automatic dishwashing detergent only. Other detergents

can produce excessive suds that can overflow out of the

dishwasher and reduce washing performance.

■ Add detergent just before starting cycle.

■ Store tightly closed detergent in a cool, dry place. Fresh

automatic dishwasher detergent results in better cleaning.

NOTE: Do not use detergent with a rinse cycle.

Filling the dispenser

1. If the dispenser cover is closed, open the cover by moving

the cover latch to the right.

2. Add the correct amount of detergent to the Main Wash

section of the dispenser according to the chart below. If you

are using a tablet detergent, it must be placed in the Main

Wash section. (See “How much detergent to use.”)

3. Add the correct amount of detergent to the Pre-Wash section

of the dispenser, if needed, according to the chart below.

4. Close the dispenser cover.

It is normal for the cover to open partially when dispensing

detergent.

NOTE: See the “Cycle Selection Charts” for which section to fill

depending on the cycle selected.

A. Cover latch

B. Main Wash section

C. Pre-Wash section

MAIN WASH

PRE-

WASH

Soft Water

Hard Water

Soft Water

Hard Water

MAIN WASH

PRE-

WASH

Soft Water

Hard Water

Soft Water

Hard Water

NOTE: Fill amounts shown are for standard powdered detergent. Amounts may vary if you use liquid or concentrated powdered

detergent. Tablet detergents should be placed in the main wash section of the detergent dispenser with the cover closed. Follow

instructions on the package when using liquid dishwasher detergent, concentrated powdered detergent or tablet detergent.

Rinse Aid Dispenser

IMPORTANT: Your dishwasher is designed to use a liquid rinse aid. The use of rinse aids greatly improves drying by allowing water to

drain from the dishes after the final rinse. They also keep water from forming droplets that can dry as spots or streaks. Do not use a

solid or bar-type rinse aid.

Filling the dispenser

The rinse aid dispenser holds 5 oz (150 mL) of rinse aid. Under

normal conditions, this will last for about 1 to 3 months.

1. Make sure the dishwasher door is fully open.

2. Turn the dispenser knob to “Open” and lift it out.

3. Pour rinse aid into the opening until the indicator points to

“Full.” Take care not to overfill. (When the rinse aid indicator

drops to the “Add” level, add more rinse aid.)

4. Clean up any spilled rinse aid with a damp cloth.

5. Place the knob back into the opening and turn to the “Lock”

position.

Rinse aid setting

The amount of rinse aid released into the final rinse can be

adjusted. For most water conditions, the factory setting of 2 will

give good results. If you have hard water or notice rings or

calcium spots on your glasses or dishes, try a higher setting.

To adjust the setting

1. Remove the dispenser knob.

2. Turn the arrow adjuster inside the dispenser to the desired

setting by either using your fingers or inserting a flat-blade

screwdriver into the center of the arrow and turning.

3. Replace the dispenser knob.

How much detergent to use

■ The amount of detergent to use depends on the soil level of your dishes, hardness of your water, and the type of detergent. If you

use too little, dishes will not be clean. If you use too much in soft water, glassware will etch.

■ Water hardness can change over a period of time. Find out your water’s hardness by asking your local water department, water

softener company, or county extension agent

Detergent Dispenser fill recommendations per dish load soil level and water hardness

Water Hardness

Light Soil or Prerinsed Normal Soil Heavy Soil

Main Wash

section

Pre-Wash

section

Main Wash

section

Pre-Wash

section

Main Wash

section

Pre-Wash

section

Soft

(0-2 grains per

U.S. gallon)

4 tsp (20 mL)

Fill to Soft Water

line

Empty 6 tsp (30 mL)

Fill above the

Soft Water line

2 tsp (10 mL)

Fill to Soft Water

line

9 tsp (45 mL)

Fill cup

completely

7 tsp (35 mL)

Fill cup

completely

Medium

(2-6 grains per

U.S. gallon)

6 tsp (30 mL)

Fill above the

Soft Water line

2 tsp (10 mL)

Fill to Soft Water

line

6 tsp (30 mL)

Fill above the

Soft Water line

4 tsp (20 mL)

Fill to Hard Water

line

9 tsp (45 mL)

Fill cup

completely

7 tsp (35 mL)

Fill cup

completely

Hard

(7 grains per U.S.

gallon and above)

8 tsp (40 mL)

Fill to Hard Water

line

4 tsp (20 mL)

Fill to Hard Water

line

9 tsp (45 mL)

Fill cup

completely

7 tsp (35 mL)

Fill cup

completely

9 tsp (45 mL)

Fill cup

completely

7 tsp (35 mL)

Fill cup

completely

A. Dispenser knob

B. Indicator

C. Indicator window

USE RINSE AID FOR

BETTER DRYING

Lock

Open

Full

Add

Full

Add

Lock

Open

Dishwasher Efficiency Tips

Hot water dissolves and activates the dishwashing detergent.

Hot water also dissolves grease on dishes and helps glasses dry

spot-free. For best dishwashing results, water should be 120°F

(49°C) as it enters the dishwasher. Loads may not wash as well if

the water temperature is too low. Water that is too hot can make

some soils harder to remove and cause certain detergent

ingredients not to function. If your water heater is located far from

the dishwasher, it may be necessary to run the hot water at the

faucet closest to the dishwasher to minimize the amount of cold

water in the water line.

To check water temperature

1. Run hot water at the faucet closest to your dishwasher for at

least 1 minute.

2. Place a candy or meat thermometer in a glass measuring

cup.

3. Check the temperature on the thermometer as the water is

running into the cup.

Additional efficiency tips

■ To save water and energy and time, do not rinse dishes

before putting them into the dishwasher.

■ Use a low energy, quick, or short cycle whenever possible.

These cycles use less hot water and energy than a normal

cycle.

■ Use a delay feature (on some models) to run your dishwasher

during off-peak hours. Local utilities recommend avoiding

heavy usage of energy at certain times of day.

■ During the summer, run your dishwasher at night. This

reduces daytime heat buildup in the kitchen.

■ Use the energy-saving dry option whenever possible. Allow

longer drying times (overnight) when using these options. Use

a rinse aid to improve drying.

■ Use cycles or options that add extra heat to the wash or rinse

portion of the cycle only when needed.

■ Run your dishwasher with full loads. Run a rinse cycle after

meals until the dishwasher is full.

■ If your home is equipped with a water softener, you may want

to avoid starting the dishwasher during the regeneration of

the softener, since this may contribute to poor wash

performance.

Cycle Selection Charts

Select the wash cycle and options desired and press START/

RESUME. The dishwasher starts filling once you press START/

RESUME, unless you select a delay wash. You can change

cycles and options as the machine is filling.

After completing a wash cycle, the dishwasher remembers the

cycle and options. It uses the same cycle and options again in

the next wash cycle, if you press only START/RESUME.

NOTE: If the door is opened during a cycle or the power is

interrupted, the Start/Resume indicator flashes. The cycle will not

resume until the door is closed and Start/Resume is pressed.

A “●” shows what steps are in each cycle. Your model may have

some or all of the cycles shown.

Display time is for models with the dual digit display on the

console.

These models meet the ENERGY STAR

guidelines for energy

efficiency.

Temperatures indicate where extra heat is added. The cycle

countdown (on some models) pauses at these points until water

reaches the temperature.

Water usage is shown in U.S. gallons/liters.

Pots & Pans

Use this cycle for hard-to-clean, heavily soiled pots, pans,

casseroles, and regular tableware. During the wash, the wash

action will repeatedly pause for several seconds.

Initial display time after rotating clock pattern: 92-99 min.

Use both detergent dispenser sections.

Pre-

Wash

Main

Wash

Rinse Rinse Final

Heated

Rinse

Dry Mini-

mum

Time

(min)

Water

Usage

(gal/L)

●●

140°F

(60°C)

●●

140°F

(60°C)

● 99*

Light

soil

6.9-7.8/

26.1-29.6

Normal

Use this cycle for loads with normal amounts of food soil. (The

energy-usage label is based on this cycle.) During the wash, the

wash action will repeatedly pause for several seconds.

Initial display time after rotating clock pattern: 64-84 min.

Use both detergent dispenser sections.

Pre-

Wash

Main

Wash

Purge Rinse Final

Heated

Rinse

Dry Mini-

mum

Time

(min)

Water

Usage

(gal/L)

●●

120°F

(49°C)

●●

140°F

(60°C)

● 71*

Light

soil

5.6-6.8/

21.2-25.7

*If the incoming water is less than the recommended temperature

or food soils are heavy, the cycle will automatically compensate

by adding time, heat, and water as needed.

Canceling a Cycle

Anytime during a cycle, press CANCEL/DRAIN. Your dishwasher

starts a 2-minute drain, if needed, and clears all indicators. Let

the dishwasher drain completely.

NOTE: If your dishwasher does not need draining, the

dishwasher stops and clears all indicators.

To stop the drain

You can press CANCEL/DRAIN again to stop the drain

immediately. Be sure to drain the dishwasher before starting a

new cycle.

To clear the indicators

Press CANCEL/DRAIN before starting the dishwasher to clear all

options and cycles.

Changing a Cycle or Setting

During the first fill of a cycle

1. Press a new cycle and/or options.

2. Check the detergent dispensers. They must be filled properly

for the new cycle.

3. Press START/RESUME.

After the first fill of a cycle

1. Press CANCEL/DRAIN. Your dishwasher starts a 2-minute

drain, if needed, and clears all indicators. Let the dishwasher

drain completely.

NOTE: If your dishwasher does not need draining, the

dishwasher stops and clears all indicators.

2. Check the detergent dispensers. They must be filled properly

for the new cycle.

3. Press a new cycle and/or options.

4. Press START/RESUME. (The door must be closed.)

Adding Items During a Cycle

You can add an item anytime before the main wash starts. Open

the door and check the detergent dispenser. If the cover is still

closed, you can add items.

To add items

1. Lift up the door latch to stop the cycle. Wait for the spraying

action to stop before opening the door.

2. Open the door. If the detergent dispenser cover is still closed,

add the item.

3. Close the door firmly until it latches.

4. Press START/RESUME. The dishwasher resumes the cycle

after a 5-second pause.

Option Selections

You can customize your cycles by pressing an option. If you

change your mind, press the option again to turn off the option,

or select a different option if desired.

You can change an option anytime before the selected option

begins. For example, you can turn off the drying option anytime

before drying begins.

After a wash cycle, the dishwasher remembers the options used.

It uses the same options in the next wash cycle, if you press only

START/RESUME.

Hi-Temp Wash

Select this option to increase the target water temperature during

the wash portions of the cycle. Hi-Temp Wash raises the target

water temperature to 145ºF (63ºC) in the main wash. Heating the

water helps improve washing results. Hi-Temp Wash is useful

when loads contain baked-on food.

This option adds heat, wash time and water to the cycle.

NOTE: Hi-Temp Wash is an option with Pots & Pans and Normal

cycles.

Heated Dry

Select this option to dry dishes with heat.

Switching off Heated Dry skips the dry period. This is useful when

loads contain plastic dinnerware that may be sensitive to high

temperatures. The dishes take longer to dry, and some spotting

may occur. Some items (such as plastics) may need towel drying.

For best drying, use a liquid rinse aid.

NOTE: Heated Dry is an option with all cycles, except the Rinse

Only cycle. Heated Dry begins automatically with all cycles

unless you switch it off.

Rinse Only

Use this rinse cycle for rinsing dishes, glasses, and silverware

that will not be washed right away.

Initial display time after rotating clock pattern: 3 min.

Do not use detergent with this cycle.

Pre-

Wash

Main

Wash

Rinse Rinse Final

Heated

Rinse

Dry Time

(min)

Water

Usage

(gal/L)

● 10 1.8-/6.8

Lock

Use the lock to avoid unintended use of the dishwasher. You can

also use the lock feature to avoid unintended cycle or option

changes during a cycle.

When the lock is lit, all buttons are disabled.

NOTES:

■ The dishwasher door can be opened while the controls are

locked.

■ You can turn on the lock while the dishwasher is running. If

you open the door, unlock the controls and press START/

RESUME to restart. You can lock controls again, if desired.

To turn on the lock

Press and hold HEATED DRY for 4 seconds. The lock glows.

If you press any pad while your dishwasher is locked, the light

flashes 3 times and the selection is ignored.

To turn off the lock

Press and hold HEATED DRY for 4 seconds. The light turns off.

Delay start

Select this option to run your dishwasher at a later time or during

off-peak hours. You can add items to the load anytime during the

delay countdown. After adding items, close the door firmly until it

latches. The delay countdown will not continue if the door is not

latched. Press START/RESUME. If the door is unlatched, the

Start/Resume indicator flashes. The delay countdown stops until

you latch the door and press START/RESUME.

To delay the start

1. Press DELAY for a 4-hour delay. The number above or to the

left of the 4 Hour Delay pad glows.

2. Select a wash cycle and option or skip to Step 3 to use the

cycle and options selected for last cycle.

3. Press START/RESUME. (The door must be closed.) The delay

countdown starts, and the cycle will begin after 4 hours.

NOTES:

■ To cancel the delay and cycle, press CANCEL/DRAIN.

■ To cancel the delay and start the cycle, press START/

RESUME.

Cycle Status Indicators

Follow the progress of your dishwasher with the Cycle Status

Indicators. Clean glows when a cycle is finished. The light turns

off when you open the door or press CANCEL/DRAIN.

Washing

Washing glows while the dishwasher is washing or rinsing the

dishes.

Drying

Drying glows while the dishwasher is drying your dishes.

Clean

Clean glows when a cycle is finished. The light turns off when you

open the door or press CANCEL/DRAIN.

Sensor System

This dishwasher is equipped with an optical sensor wash that

detects water temperature, soil and detergent amount. Wash

cycles are adjusted based on what is sensed.

The dishwasher “senses” wash water quality during a series of

pauses in the wash cycle. The sensor monitors water

temperature and the amount of soil and detergent appearing in

the wash water. It automatically adjusts the wash cycle for the

best wash. Lightly soiled dishes will use less water and energy.

Heavily soiled dishes will get more water and increased

temperature and wash time. This dishwasher will automatically

adjust the sensor approximately once a year to your water

quality.

IMPORTANT: The very first wash cycle after installation in your

home will be adjusted to include an additional 2 rinses. This cycle

must not be interrupted for proper sensor adjustment. If this

adjustment cycle is canceled or stopped before the Clean light

comes on at the end of the cycle, the next wash cycle will repeat

this sensor adjustment.

Drying System

During drying, you can see steam escaping through the vent at

the upper left corner of the door. This is normal as the heat dries

your dishes.

IMPORTANT: The vapor is hot. Do not touch the vent

during drying.

Overfill Protection Float

The overfill protection float (in the front right corner of the

dishwasher tub) keeps the dishwasher from overfilling. It must be

in place for the dishwasher to operate.

Check under the float for objects that may keep the protector

from moving up or down.

WASHING SPECIAL ITEMS

If you have doubts about washing a particular item, check with the manufacturer to see if it is dishwasher safe.

Material Dishwasher Safe?/Comments

Aluminum Yes

High water temperature and detergents

can affect finish of anodized aluminum.

Disposable

Aluminum

Do not wash throwaway aluminum pans

in the dishwasher. These might shift

during washing and transfer black marks

to dishes and other items.

Bottles and Cans No

Wash bottles and cans by hand. Labels

attached with glue can loosen and clog

the spray arms or pump and reduce

washing performance.

Cast Iron No

Seasoning will be removed, and iron will

rust.

China/

Stoneware

Yes

Always check manufacturer’s

recommendations before washing.

Antique, hand-painted, or over-the-glaze

patterns may fade. Gold leaf can discolor

or fade.

Crystal Yes

Always check manufacturer’s

recommendations before washing. Some

types of leaded crystal can etch with

repeated washing.

Gold No

Gold-colored flatware will discolor.

Glass Yes

Milk glass yellows with repeated

dishwasher washing.

Hollow-Handle

Knives

Handles of some knives are attached to

the blade with adhesives which can

loosen if washed in the dishwasher.

Material Dishwasher Safe?/Comments

Pewter, Brass,

Bronze

High water temperatures and detergent

can discolor or pit the finish.

Disposable

Plastics

Cannot withstand high water

temperatures and detergents.

Plastics Yes

Always check manufacturer’s

recommendations before washing.

Plastics vary in their capacity to

withstand high temperatures and

detergents. Load plastics in top rack

only.

Stainless Steel Yes

Run a rinse cycle if not washing

immediately. Prolonged contact with

food containing salt, vinegar, milk

products, or fruit juice can damage

finish.

Sterling Silver or

Silver Plate

Yes

Run a rinse cycle if not washing

immediately. Prolonged contact with

food containing salt, acid, or sulfide

(eggs, mayonnaise, and seafood) can

damage finish.

Tin No

Can rust.

Wooden Ware No

Wash by hand. Always check

manufacturer’s instructions before

washing. Untreated wood can warp,

crack, or lose its finish.

DISHWASHER CARE

Cleaning

Cleaning the exterior

In most cases, regular use of a soft, damp cloth or sponge and a

mild detergent is all that is necessary to keep the outside of your

dishwasher looking nice and clean. If your dishwasher has a

stainless steel exterior, a stainless steel cleaner is recommended.

Cleaning the interior

Hard water minerals can cause a white film to build up on the

inside surfaces, especially just beneath the door area.

Do not clean the dishwasher interior until it has cooled. You may

want to wear rubber gloves. Do not use any type of cleanser

other than dishwasher detergent because it may cause foaming

or sudsing.

To clean interior

Make a paste with powdered dishwasher detergent on a damp

sponge and clean.

Use liquid automatic dishwasher detergent and clean with a

damp sponge.

See the vinegar rinse procedure in “Spotting and filming on

dishes” in “Troubleshooting.”

NOTE: Run a normal cycle with detergent after cleaning the

interior.

Drain Air Gap

Check the drain air gap anytime your dishwasher isn’t draining

well.

Some state or local plumbing codes require the addition of a

drain air gap between a built-in dishwasher and the home drain

system. If a drain is clogged, the drain air gap protects your

dishwasher from water backing up into it.

The drain air gap is usually located on top of the sink or

countertop near the dishwasher. To order a drain air gap, contact

your local dealer; or call us or your designated service center and

ask for Part Number 300096. For more information, see

“Assistance or Service.”

NOTE: The drain air gap is an external plumbing device that is

not part of your dishwasher. The warranty provided with your

dishwasher does not cover service costs directly associated with

the cleaning or repair of the external drain air gap.

To clean the drain air gap

Clean the drain air gap periodically to ensure proper drainage of

your dishwasher. Follow the cleaning instructions provided by the

manufacturer. With most types, you lift off the chrome cover.

Unscrew the plastic cap. Then check for any soil buildup. Clean if

necessary.

Storing

Storing for the summer

Protect your dishwasher during the summer months by turning

off the water supply and power supply to the dishwasher.

Winterizing your dishwasher

Protect your dishwasher and home against water damage due to

freezing water lines. If your dishwasher is left in a seasonal

dwelling or could be exposed to near freezing temperatures, have

your dishwasher winterized by authorized service personnel.

TROUBLESHOOTING

First try the solutions suggested here and possibly avoid the cost of a service call...

Dishwasher is not operating properly

■ Dishwasher does not run or stops during a cycle

Is the Start/Resume indicator flashing? Opening the door or

interrupting the power stopped the cycle. Close the door and

press START/RESUME.

Does the Start/Resume indicator flash 3 times when you

press START/RESUME? The dishwasher is waiting for you to

open the door after the last cycle. Open and close the door,

then press START/RESUME.

Is the door closed tightly and latched?

(NOTE: On models with a dual-digit display, the control

displays “- -” during a cycle if it believes the door is not

latched.)

Is the right cycle selected? Refer to the “Cycle Selection

Charts.”

Is there power to the dishwasher? Has a household fuse

blown, or has a circuit breaker tripped? Replace the fuse or

reset the circuit breaker. If the problem continues, call an

electrician.

Has the motor stopped due to an overload? The motor

automatically resets itself within a few minutes. If it does not

restart, call for service.

Is the water shutoff valve (if installed) turned on?

It is normal for certain cycles to repeatedly pause for several

seconds during the main wash.

■ Clean light is flashing

The dishwasher has malfunctioned. Call for service to check

heater circuit.

■ Dishwasher will not fill

Is the overfill protection float able to move up and down

freely? Press down to release.

■ Dishwasher seems to run too long

Is the water supplied to the dishwasher hot enough? The

dishwasher runs longer while heating water. Refer to the

“Dishwasher Efficiency Tips” section.

A delay automatically occurs in some wash and rinse cycles

until the water reaches the proper temperature.

■ Water remains in the dishwasher

Is the cycle complete?

■ Detergent remains in the covered section of the

dispenser

Is the cycle complete?

Is the detergent lump-free? Replace detergent if necessary.

■ White residue on the front of the access panel

Was too much detergent used? Refer to the “Detergent

Dispenser” section.

Is the brand of detergent making excess foam? Try a different

brand to reduce foaming and eliminate buildup.

■ Odor in the dishwasher

Are dishes washed only every 2 or 3 days? Run a rinse cycle

once or twice a day until you have a full load.

Does the dishwasher have a new plastic smell? Run a vinegar

rinse as described in “Spotting and filming on dishes” later in

this Troubleshooting guide.

■ Condensation on the kitchen counter (built-in models)

Is the dishwasher aligned with the countertop? Moisture from

the vent in the dishwasher console can form on the counter.

Refer to the Installation Instructions for more information.

Dishes are not completely clean

■ Food soil left on the dishes

Is the dishwasher loaded correctly? Refer to the “Dishwasher

Loading” section.

Is the water temperature too low? For best dishwashing

results, water should be 120°F (49°C) as it enters the

dishwasher. Refer to the “Dishwasher Efficiency

Tips” section.

Did you use the correct amount of fresh detergent? Use

recommended dishwasher detergents only. Refer to the

“Detergent Dispenser” section. Detergent must be fresh to be

effective. Store detergent in a cool, dry area. Heavy soil and/

or hard water generally require extra detergent.

Do you have hard water? You may need to increase the

amount of detergent you are using. Refer to the “Detergent

Dispenser” section. Also, you may need to switch to a

detergent with a phosphorus content of 8.7%.

Is detergent caked in dispenser? Use fresh detergent only. Do

not allow detergent to sit for several hours in a wet dispenser.

Clean dispenser when caked detergent is present.

Is the pump or spray arm clogged by labels from bottles and

cans?

Is the home water pressure high enough for proper

dishwasher filling? Home water pressure should be 20 to

120 psi (138 to 828 kPa) for proper dishwasher fill. If you have

questions about your water pressure, call a licensed, qualified

plumber.

Are high suds slowing the wash arm? Do not use soap or

laundry detergents. Use recommended dishwasher

detergents only.

Spots and stains on dishes

■ Spotting and filming on dishes

Is your water hard or is there a high mineral content in your

water? Conditioning the final rinse water with a liquid rinse

aid helps eliminate spotting and filming. Keep the rinse aid

dispenser filled.

Is the water temperature too low? For best dishwashing

results, water should be 120°F (49°C) as it enters the

dishwasher. Refer to the “Dishwasher Efficiency

Tips” section.

Did you use the correct amount of effective detergent? Use

recommended dishwasher detergents only. Refer to the

“Detergent Dispenser” section. Detergent must be fresh to be

effective. Store detergent in a cool, dry area. Heavy soil and/

or hard water generally require extra detergent.

Is the home water pressure high enough for proper

dishwasher filling? Home water pressure should be 20 to

120 psi (138 to 828 kPa) for proper dishwasher fill. If you have

questions about your water pressure, call a licensed, qualified

plumber.

NOTE: To remove spots and film from dishes, try a white

vinegar rinse. This procedure is intended for occasional use

only. Vinegar is an acid, and using it too often could damage

your dishwasher.

1. Wash and rinse dishes. Use an air-dry or an energy saving

dry option. Remove all silverware or metal items.

2. Put 2 cups (500 mL) white vinegar in a glass or

dishwasher-safe measuring cup on the bottom rack.

3. Run the dishwasher through a complete washing cycle

using an air-dry or an energy saving dry option. Do not

use detergent. Vinegar will mix with the wash water.

■ Silica film or etching (silica film is a milky, rainbow-

colored deposit; etching is a cloudy film)

Sometimes there is a water/chemical reaction with certain

types of glassware. This is usually caused by some

combination of soft or softened water, alkaline washing

solutions, insufficient rinsing, overloading the dishwasher,

and the heat of drying. It might not be possible to avoid the

problem, except by hand washing.

To slow this process use a minimum amount of detergent but

not less than 1 tb (15 g) per load. Use a liquid rinse aid and

underload the dishwasher to allow thorough rinsing. Silica

film and etching are permanent and cannot be removed. Do

not use heated drying.

■ White spots on cookware with nonstick finish

Has the dishwasher detergent removed cookware

seasoning? Reseason cookware after washing in the

dishwasher.

■ Brown stains on dishes and dishwasher interior

Does your water have high iron content? Rewash dishes

using 1-3 tsp (5-15 mL) of citric acid crystals added to the

covered section of the detergent dispenser. Do not use

detergent. Follow with a Normal wash cycle with detergent. If

treatment is needed more often than every other month, the

installation of an iron removal unit is recommended.

■ Black or gray marks on dishes

Are aluminum items rubbing dishes during washing?

Disposable aluminum items can break down in the

dishwasher and cause marking. Hand wash these items.

Remove aluminum markings by using a mild abrasive cleaner.

■ Orange stains on plastic dishes or dishwasher interior

Are large amounts of tomato-based foods on dishes placed

in the dishwasher? Stains gradually fade over time. Regular

use of heated drying will slow fading. Stains will not affect

dishwasher performance. Regular use of a rinse cycle and an

air-dry or energy-saving dry option will reduce the likelihood

of staining.

Dishes do not dry completely

■ Dishes are not dry

Did you load your dishwasher to allow proper water

drainage? Do not overload. Refer to the “Dishwasher

Loading” section. Use a liquid rinse aid to speed drying.

Are the plastics wet? Plastics often need towel drying.

Is the rinse aid dispenser empty? Refer to the “Rinse Aid

Dispenser” section.

Did you use an air-dry or energy-saving dry option? Use a

heated drying option for dryer dishes.

Dishes are damaged during a cycle

■ Chipping of dishes

Did you load the dishwasher properly? Load the dishes and

glasses so they are stable and do not strike together from

washing action. Minimize chipping by moving the rack in and

out slowly.

NOTE: Antiques, feather-edged crystal, and similar types of

china and glassware might be too delicate for automatic

dishwashing. Wash by hand.

Noises

■ Grinding, grating, crunching or buzzing sounds

A hard object has entered the wash module (on some

models). When the object is ground up, the sound should

stop. If the noise persists after a complete cycle, call for

service.

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check

“Troubleshooting.” It may save you the cost of a service call. If

you still need help, follow the instructions below.

When calling, please know the purchase date and the complete

model and serial number of your appliance. This information will

help us to better respond to your request.

If you need replacement parts

If you need to order replacement parts, we recommend that you

use only FSP

replacement parts. These parts will fit right and

work right because they are made with the same precision used

to build every new ROPER

appliance.

To locate FSP

replacement parts in your area, call us or your

nearest designated service center.

In Canada, call 1-800-807-6777, or your nearest designated

service center.

In the U.S.A.

Call the Roper Customer eXperience Center toll free:

1-800-44-ROPER (1-800-447-6737).

Our consultants provide assistance with:

■ Features and specifications on our full line of appliances.

■ Installation information.

■ Use and maintenance procedures.

■ Accessory and repair parts sales.

■ Specialized customer assistance (Spanish speaking,

hearing impaired, limited vision, etc.).

■ Referrals to local dealers, repair parts distributors, and

service companies. Roper designated service technicians are

trained to fulfill the product warranty and provide after-

warranty service, anywhere in the United States.

To locate the Roper designated service company in your

area, you can also look in your telephone directory Yellow

Pages.

For further assistance

If you need further assistance, you can write to us with any

questions or concerns at:

Roper Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

In Canada

Call our Whirlpool Canada LP Customer Interaction Centre

toll free: 1-800-807-6777 or visit our website at www.roper.ca

Our consultants provide assistance with:

■ Features and specifications on our full line of appliances.

■ Warranty information.

■ Use and maintenance procedures.

■ Accessory and repair parts sales.

■ Referrals to local dealers, repair parts distributors, and

service companies. Whirlpool Canada LP designated service

technicians are trained to fulfill the product warranty and

provide after-warranty service, anywhere in Canada.

For further assistance

If you need further assistance, you can write to us with any

questions or concerns at:

Customer Interaction Centre

Whirlpool Canada LP

1901 Minnesota Court

Mississauga, Ontario L5N 3A7

Please include a daytime phone number in your correspondence.

WHIRLPOOL CORPORATION MAJOR APPLIANCE WARRANTY

ONE YEAR LIMITED WARRANTY

For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or

furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool”) will pay for Factory Specified Parts

and repair labor to correct defects in materials or workmanship. Service must be provided by a Whirlpool designated service company.

This limited warranty applies only when the major appliance is used in the country in which it was purchased.

ITEMS WHIRLPOOL WILL NOT PAY FOR

1. Service calls to correct the installation of your major appliance, to instruct you how to use your major appliance, to replace or repair

house fuses or to correct house wiring or plumbing.

2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Those consumable parts are excluded from warranty

coverage.

3. Repairs when your major appliance is used for other than normal, single-family household use.

4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in

accordance with electrical or plumbing codes, or use of products not approved by Whirlpool.

5. Any food loss due to refrigerator or freezer product failures.

6. Replacement parts or repair labor costs for units operated outside the United States or Canada.

7. Pickup and delivery. This major appliance is designed to be repaired in the home.

8. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

9. Expenses for travel and transportation for product service in remote locations.

10. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not installed in accordance with

published installation instructions.

11. Replacement parts or repair labor costs when the major appliance is used in a country other than the country in which it was

purchased.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED

HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,

ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. WHIRLPOOL SHALL NOT BE LIABLE FOR

INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION

OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES

YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE

TO PROVINCE.

Outside the 50 United States and Canada, this warranty does not apply. Contact your authorized Whirlpool dealer to determine if

another warranty applies.

If you need service, first see the “Troubleshooting” section of the Use & Care Guide. After checking “Troubleshooting,” additional help

can be found by checking the “Assistance or Service” section or by calling Whirlpool. In the U.S.A., call 1-800-253-1301. In Canada,

call 1-800-807-6777.

12/05

Keep this book and your sales slip together for future

reference. You must provide proof of purchase or installation

date for in-warranty service.

Write down the following information about your major appliance

to better help you obtain assistance or service if you ever need it.

You will need to know your complete model number and serial

number. You can find this information on the model and serial

number label located on the product.

Dealer name____________________________________________________

Address ________________________________________________________

Phone number__________________________________________________

Model number __________________________________________________

Serial number __________________________________________________

Purchase date __________________________________________________

SÉCURITÉ DU LAVE-VAISSELLE

Risque possible de décès ou de blessure grave si vous ne

suivez pas immédiatement les instructions.

Risque possible de décès ou de blessure grave si vous

ne suivez pas les instructions.

Tous les messages de sécurité vous diront quel est le danger potentiel et vous disent comment réduire le risque de blessure et

ce qui peut se produire en cas de non-respect des instructions.

Votre sécurité et celle des autres est très importante.

Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager. Assurez-vous de

toujours lire tous les messages de sécurité et de vous y conformer.

AVERTISSEMENT

DANGER

Voici le symbole d’alerte de sécurité.

Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves à vous

et à d’autres.

Tous les messages de sécurité suivront le symbole d’alerte de sécurité et le mot “DANGER” ou

“AVERTISSEMENT”. Ces mots signifient :

IMPORTANTES INSTRUCTIONS DE SÉCURITÉ

AVERTISSEMENT : Lors de l’utilisation du lave-vaisselle, suivre les précautions élémentaires dont les suivantes :

CONSERVEZ CES INSTRUCTIONS

■

Lire la totalité des instructions avant d’utiliser le

lave-vaisselle.

■

N’utiliser le lave-vaisselle que pour laver la vaisselle.

■

Utiliser les détersifs ou agents de rinçage recommandés

pour lave-vaisselle et les garder hors de la portée des

enfants.

■

Lorsque vous chargez le lave-vaisselle :

1) Placer les objets coupants de façon qu’ils ne puissent

endommager le joint de la porte; et

2) Placer les couteaux le manche vers le haut de façon à ne

pas vous couper.

■

Ne pas laver d’articles en plastique à moins qu’ils ne soient

marqués “Peut aller au lave-vaisselle” ou l’équivalent. Si

l’article ne porte aucune indication, vérifier auprès du

fabricant.

■

Ne pas toucher l’élément chauffant pendant le

fonctionnement ou immédiatement après.

■

Ne pas faire fonctionner le lave-vaisselle si tous les

panneaux de l’enceinte ne sont pas en place.

■

Ne pas jouer avec les commandes.

■

Ne pas abuser, vous asseoir ni monter sur la porte,

le couvercle ou les paniers du lave-vaisselle.

■

Pour éviter tout risque d’accident, ne pas laisser les

enfants jouer dans ou sur le lave-vaisselle.

■

Sous certaines conditions, de l’hydrogène peut se former

dans un réseau d’eau chaude inutilisé depuis deux

semaines ou plus. L’HYDROGÈNE EST UN GAZ

EXPLOSIBLE. Si le système d’eau chaude n’a pas été

utilisé depuis un certain temps, laisser couler l’eau chaude

des robinets pendant quelques minutes avant de faire

fonctionner le lave-vaisselle. Cette mesure permettra à

l’hydrogène de s’évaporer. Ce gaz étant inflammable, ne

pas fumer ni utiliser de flamme nue pendant cette période.

■

Enlever la porte ou le couvercle du compartiment de lavage

lorsque vous remplacez ou mettez au rebut un vieux

lave-vaisselle.

Avant d’utiliser le lave-vaisselle

■ Installer le lave-vaisselle dans un endroit à l’abri des

intempéries. Protéger l’appareil contre le gel pour éviter une

rupture possible du robinet de remplissage. De telles ruptures

ne sont pas couvertes par la garantie. Voir la section

“Remisage” pour la préparation du remisage en hiver.

■ Installer et niveler le lave-vaisselle sur un plancher qui pourra

en supporter le poids, et dans un espace convenable pour

ses dimensions et son utilisation.

■ Enlever tous les bouchons d’expédition des tuyaux et des

raccords (tel que le capuchon sur l’ouverture de vidange)

avant l’installation. Voir les instructions d’installation pour des

renseignements complets.

Risque de basculement

Ne pas utiliser le lave-vaisselle jusqu’à ce qu’il soit

complètement installé.

Ne pas appuyer sur la porte ouverte.

Le non-respect de ces instructions peut causer des

blessures graves ou des coupures.

AVERTISSEMENT

Risque de choc électrique

Relier le lave-vaisselle à la terre d’une méthode

électrique.

Brancher le fil relié à la terre au connecteur vert relié à

la terre dans la boîte de la borne.

Ne pas utiliser un câble de rallonge.

Le non-respect de ces instructions peut causer

un décès, un incendie ou un choc électrique.

■

Pour un lave-vaisselle relié à la terre, branché avec

un cordon :

Le lave-vaisselle doit être relié à la terre. En cas d'un

mauvais fonctionnement ou d'une panne, la mise à terre

réduira le risque d'un choc électrique en fournissant le

moins de résistance pour le courant électrique. Le lave-

vaisselle est équipé d'un cordon avec un conducteur

pour relier les appareils à la terre. La fiche doit être

branchée sur une prise appropriée, installée et reliée à la

terre conformément aux codes et règlements locaux.

AVERTISSEMENT : La connexion incorrecte

du conducteur pour relier les appareils à la terre peut

causer le risque de choc électrique. Vérifier avec un

électricien compétent ou un représentant de service si

vous avez des doutes si le lave-vaisselle est

correctement relié à la terre. Ne pas modifier la fiche

fournie avec le lave-vaisselle; si elle n'entre pas dans la

prise, faire installer une prise appropriée par un

électricien compétent.

■

Pour un lave-vaisselle branché en permanence :

Le lave-vaisselle doit être branché à un système

d'installation électrique permanent en métal relié à la

terre, ou un conducteur pour relier les appareils doit être

relié avec les conducteurs du circuit et branché à une

borne pour relier les appareils à la terre ou au cordon

d'alimentation électrique avec le lave-vaisselle.

INSTRUCTIONS DE MISE À LA TERRE

CONSERVEZ CES INSTRUCTIONS

La page charge ...

Roper Dishwasher RUD8050S Manuel utilisateur

Marque: Roper

Modèle: Dishwasher RUD8050S

Catégorie: Lave-vaisselle

Taper: Manuel utilisateur

Ce manuel convient également à

RUD8050S

Télécharger le PDF

rapport

Roper Dishwasher RUD8050S Manuel utilisateur

Ce manuel convient également à

Roper Dishwasher RUD8050S Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents