AEG L83480SFL Manuel utilisateur

EN User Manual 2

Washing Machine

FR Notice d'utilisation 28

Lave-linge

L 83480 SFL

CONTENTS

1. SAFETY INFORMATION...........................................................................................3

2. SAFETY INSTRUCTIONS.......................................................................................... 4

3. PRODUCT DESCRIPTION........................................................................................ 5

4. CONTROL PANEL.....................................................................................................6

5. PROGRAMMES ........................................................................................................ 9

6. CONSUMPTION VALUES.......................................................................................12

7. OPTIONS................................................................................................................. 13

8. SETTINGS................................................................................................................ 14

9. BEFORE FIRST USE.................................................................................................15

10. DAILY USE............................................................................................................. 15

11. HINTS AND TIPS...................................................................................................19

12. CARE AND CLEANING........................................................................................ 20

13. TROUBLESHOOTING...........................................................................................24

14. TECHNICAL DATA............................................................................................... 26

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you

impeccable performance for many years, with innovative technologies that help

make life simpler features you might not find on ordinary appliances. Please

spend a few minutes reading to get the very best from it.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.aeg.com

Register your product for better service:

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the

following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

www.aeg.com

2

1. SAFETY INFORMATION

Before the installation and use of the appliance,

carefully read the supplied instructions. The

manufacturer is not responsible if an incorrect

installation and use causes injuries and damages. Always

keep the instructions with the appliance for future

reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved.

• Do not let children play with the appliance.

• Children of less than 3 years should be kept away

unless continuously supervised.

• Keep all packaging away from children.

• Keep all detergents away from children.

• Keep children and pets away from the appliance door

when it is open.

• Cleaning and user maintenance shall not be made by

children without supervision.

1.2

General Safety

•

Do not change the specification of this appliance.

• Obey the maximum load volume of 8 kg (refer to the

“Programme chart” chapter).

• The operating water pressure (minimum and

maximum) must be between 0,5 bar (0,05 MPa) and 8

bar (0,8 MPa).

• The ventilation openings in the base (if applicable)

must not be obstructed by a carpet.

• The appliance is to be connected to the water mains

using the new supplied hose-sets. Old hose sets must

not be reused.

ENGLISH

3

• If the supply cord is damaged, it must be replaced by

the manufacturer, its Authorised Service Centre or

similarly qualified persons in order to avoid a hazard.

• Before maintenance, deactivate the appliance and

disconnect the mains plug from the mains socket.

• Do not use water spray and steam to clean the

appliance.

• Clean the appliance with a moist soft cloth. Only use

neutral detergents. Do not use abrasive products,

abrasive cleaning pads, solvents or metal objects.

2. SAFETY INSTRUCTIONS

2.1 Installation

• Remove all the packaging and the

transit bolts.

• Keep the transit bolts. When you

move the appliance again you must

block the drum.

• Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Do not install or use a damaged

appliance.

• Obey the installation instruction

supplied with the appliance.

• Do not install or use the appliance

where the temperature is less than 0

°C or where it is exposed to the

weather.

• Make sure that the floor where you

install the appliance is flat, stable,

heat resistant and clean.

• Make sure that there is air circulation

between the appliance and the floor.

• Adjust the feet to have the necessary

space between the appliance and the

carpet.

• Do not install the appliance where the

appliance door can not be fully

opened.

2.2 Electrical connection

• The appliance must be earthed.

• Always use a correctly installed

shockproof socket.

• Make sure that the electrical

information on the rating plate agrees

with the power supply. If not, contact

an electrician.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug and to the mains

cable. Should the mains cable need

to be replaced, this must be carried

out by our Authorised Service Centre.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• Do not touch the mains cable or the

mains plug with wet hands.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• Only for UK and Ireland: The

appliance has a 13 amp mains plug. If

it is necessary to change the fuse in

the mains plug, use a 13 amp ASTA

(BS 1362) fuse.

• This appliance complies with the

E.E.C. Directives.

2.3 Water connection

• Make sure not to cause damage to

the water hoses.

• Before you connect the appliance to

new pipes or pipes not used for a

long time, let the water flow until it is

clean.

• The first time you use the appliance,

make sure that there is no leakage.

www.aeg.com

4

2.4 Use

WARNING!

Risk of injury, electrical

shock, fire, burns or damage

to the appliance.

• Use this appliance in a household

only.

• Obey the safety instructions on the

detergent packaging.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

• Make sure that you remove all metal

objects from the laundry.

• Do not put a container to collect

possible water leakage under the

appliance. Contact the Authorised

Service Centre to ensure which

accessories can be used.

• Do not touch the glass of the door

while a programme operates. The

glass can be hot.

2.5 Service

• To repair the appliance contact an

Authorised Service Centre.

• Use original spare parts only.

2.6 Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent

children and pets to get closed in the

appliance.

3. PRODUCT DESCRIPTION

3.1 Appliance overview

1 2 3

5

6

7

4

1

Worktop

2

Detergent dispenser

3

Control panel

4

Door handle

5

Rating plate

6

Drain pump filter

7

Feet for the appliance level

3.2 Fixing plate kit

(4055171146)

Available from your authorized dealer.

If you install the appliance on a plinth,

secure the appliance in the fixing plates.

Read carefully the instructions supplied

with the accessory.

ENGLISH 5

4. CONTROL PANEL

4.1 Control panel description

/

Temp.

Spin

Start/Pause

Delay

Start

Time

Save

Stains/

Prewash

Extra

Rinse

Wool/Silk

Cottons

Extra Silent

Synthetics

Easy Iron

Delicates

Duvet

Anti-Allergy

20 Min. - 3 kg

On/Off

Spin/

Drain

Rinse

Jeans

Cottons

Eco

Refresh

Anticrease

Super Eco

1 2 3

45678910

1

On/Off button

2

Programme knob

3

Display

4

Start/Pause button

5

Delay Start button

6

Time Save button

7

Extra Rinse button

8

Stains/Prewash button

9

Spin button

10

Temperature button

4.2 Display

A H

JKL

C D E F GB

I

The display shows:

www.aeg.com6

A

Temperature of the set programme

Cold water

B

Spin speed of the set programme

No Spin symbol

1)

Rinse hold symbol

1)

Only available for SPIN/DRAIN programme.

C

The phase symbols

When a programme is set, all the symbols of the phases related to the programme

come on.

When the programme starts, only the symbol of the phase in operation flashes.

When the programme is completed, the symbol of the last phase is on.

Prewash phase

Washing phase

Rinse phase

Spin phase

D

The steam symbol comes on when you set a Steam programme (if

available in your appliance).

E

The detergent overdosing symbol comes on at the end of the cycle

when the appliance detects too much detergent.

F

You cannot open the appliance door when the symbol is on. You can

open the door only when the symbol goes off.

If the programme is completed but the symbol stays on:

• The «Rinse hold» function is on.

• There is water in the drum.

G

The delay start symbol comes on when you set the delay start func-

tion.

ENGLISH 7

H

Programme time

When the programme starts, the programme time decreases with

steps of 1 minute.

Delay start

When you press the delay start button, the display shows the delay

start time

Alarm codes

If the appliance has a malfunction, the display shows alarm codes.

Refer to «Troubleshooting».

The display shows this message for some seconds when:

• you cannot set a function with the washing programme

• you try to change the washing programme while it operates.

When the programme is completed.

I

The child safety lock symbol comes on when this device is activated.

Graphic bars

The empty indicator bar appears only if the related function is avail-

able for the set programme.

The indicator bar fills accordingly to the set functions.

If you make a wrong selection the message Err indicates that the selec-

tion is not possible.

J

The time save symbol comes on when you set one of the programme

duration.

Shortened time

Extra Quick

K

The extra rinse symbol comes on when this function is activated.

The value shows the total number of the rinses.

The indicator bar is fully filled when you set the maximum number of

rinses.

www.aeg.com8

L

the Stain symbol comes on when you activate the function.

The Prewash symbol comes on when this function is activated.

The indicator bar is not fully filled when you set only one of the func-

tions.

The indicator bar is fully filled when you set the two functions.

5. PROGRAMMES

5.1 Programme Chart

Programme

Temperature range

Maximum

load

Maximum

spin speed

Programme description

(Type of load and soil level)

Washing programmes

Cottons

95°C - Cold

8 kg

1400 rpm

White cotton and coloured cotton. Normal soil

and light soil.

Extra Silent

95°C - Cold

8 kg White and coloured cotton. Normal soil and light

soil. The programme eliminates all spinning phase

to perform a silent cycle. The cycle stops with water

in the tub.

Synthetics

60° C- Cold

3 kg

1200 rpm

Synthetic items or mixed fabric items. Normal

soil.

Easy Iron

60° C - Cold

3 kg

1000 rpm

Synthetic items to be gentle washed. Normal and

light soil.

1)

Delicates

40° C - Cold

3 kg

1200 rpm

Delicate fabrics as acrylics, viscose, polyester

items. Normal soil.

Wool/Silk

40° C - Cold

2 kg

1200 rpm

Machine washable wool, hand washable wool

and delicate fabrics with «hand washing» care

symbol.

2)

Duvet

60°C - 30° C

2.5 kg

800 rpm

Special programme for one synthetic blanket, du-

vet, bedspread and so on.

ENGLISH 9

Programme

Temperature range

Maximum

load

Maximum

spin speed

Programme description

(Type of load and soil level)

Anti-Allergy

60° C

8 kg

1400 rpm

White cotton items. This programme removes mi-

cro-organisms thanks to the washing by 60°C and

adds one rinse. In this way the wash is more effec-

tive.

Spin/Drain

3)

8 kg

1400 rpm

To spin the laundry and to drain the water in the

drum. All fabrics.

Rinse

4)

Cold

8 kg

1400 rpm

To rinse and spin the laundry. All fabrics.

Jeans

60° - Cold

8 kg

1200 rpm

Items in denim and jersey. Also for dark coloured

items.

20 min.-3Kg

40°C - 30°C

3 kg

1200 rpm

Cottons and synthetics items with light soil level

or worn only once.

Super Eco

Cold

3 kg

1200 rpm

Mixed fabric (cotton and synthetic items)

5)

.

Cottons Eco

6)

60°C - 40° C

8 kg

1400 rpm

White cotton and colour-fast cotton. Normal soil.

The energy consumption decreases and the time of

the washing programme is extended.

Steam programmes

7)

Steam can be used for dried, washed or worn once laundry. These programmes can

reduce creases and odours and make your laundry more soft.

Do not use any detergent. If necessary, remove stains by washing or using localized

stain removal.

Steam programmes do not perform any hygienic cycle.

Do not set a Steam programme with these types of items:

• items where it is not specified on the care label as being suitable for tumble drying.

• all items with plastic, metal, wooden parts or alike.

Refresh

40° C

1.5 kg Steam programme for cotton and synthetic items.

This cycle removes odours from the laundry.

8)

www.aeg.com10

Programme

Temperature range

Maximum

load

Maximum

spin speed

Programme description

(Type of load and soil level)

Anticrease

40° C

1.5 kg Steam programme for synthetic items. This cycle

helps to dewrinkle the laundry.

1)

To reduce the creases of the laundry, this cycle regulates the water temperature and performs a soft

wash and spin phase. The appliance adds some rinses.

2)

During this cycle the drum rotates slowly to ensure a gentle washing. It can seem that the drum

doesn't rotate or doesn't rotate properly. Consider this as a normal functioning of the appliance.

3)

Set the spin speed. Make sure it agrees with the laundry. If you set No Spin option the only drain

phase is available.

4)

Press Extra Rinse button to add rinses. With a low spin speed the appliance performs delicate rinses.

and a short spin.

5)

This programme is for daily use and has lowest energy and water consumption maintaining a good

washing performance.

6)

Standard programmes for the Energy Label consumption values. According to regulation

1061/2010, these programmes are respectively the «Standard 60°C cotton programme» and the «Stand-

ard 40°C cotton programme». They are the most efficient programmes in terms of combined energy and

water consumption for washing normally soiled cotton laundry.

The water temperature of the washing phase may differ from the temperature declared

for the selected programme.

7)

If you set a Steam programme with dried laundry, at the end of the cycle the laundry could be humid.

It is better to expose the items to the fresh air for about 10 minutes to let the humidity dry. When the

programme is completed, quickly remove the laundry from the drum. After a steam cycle, items may to

be ironed anyway, but with less effort!

8)

Steam does not remove animal odours.

Programme options compatibility

Programme

Stains/Prewash

1)

Extra Rinse

2)

Time Save

3)

Delay Start

Cottons

■ ■ ■ ■ ■ ■

Extra Silent

■ ■ ■ ■

Synthetics

■ ■ ■ ■ ■ ■

ENGLISH 11

Programme

Stains/Prewash

1)

Extra Rinse

2)

Time Save

3)

Delay Start

Easy Iron

■ ■

■

4)

■ ■ ■

Delicates

■ ■ ■ ■ ■ ■

Wool/Silk

■ ■ ■

Duvet

■ ■

Anti-Allergy

■ ■ ■ ■ ■

Spin/Drain

5)

■ ■ ■

Rinse

■ ■ ■ ■

Jeans

■ ■

■

4)

■ ■

20 min.-3Kg

■ ■

Super Eco

■ ■ ■ ■

Cottons Eco

■ ■ ■ ■

■

6)

■

1)

If you use liquid detergent, set a programme without Prewash. The Stain option is not available with a

temperature lower then 40°C.

2)

With a low spin speed the appliance performs delicate rinses and a short spin.

3)

If you set a shorter duration, we recommend that you decrease the quantity of the load. It is possible

to load fully the appliance, however the washing results are reduced.

4)

Only the Prewash function is available.

5)

Set the spin speed. Make sure it agrees with the laundry. If you set No Spin option the only drain

phase is available.

6)

With these programmes you can set only the shorter duration.

6. CONSUMPTION VALUES

The data of this table are approximate. Different causes can change the

data: the quantity and type of laundry, the water and ambient tempera-

ture.

www.aeg.com12

At programme start the display shows the duration programme for the

maximum load capacity.

During the washing phase the programme duration is automatically cal-

culated and can be greatly reduced if the laundry load is lower than the

maximum load capacity (e.g. Cotton 60°C, maximum load capacity 8 kg,

the programme duration exceeds 2 hours; real load 1 kg, the pro-

gramme duration don’t reach 1 hour).

When the appliance is calculating the real programme duration a dot

blinks in the display.

Programmes Load (kg) Energy con-

sumption

(kWh)

Water con-

sumption

(litre)

Approxi-

mate pro-

gramme du-

ration (mi-

nutes)

Remaining

moisture

(%)

1)

Cottons 60 °C 8 1.56 65 240 52

Cottons 40 °C 8 0.90 65 236 52

Synthetics 40 °C 3 0.40 45 100 35

Delicates 40 °C 3 0.52 50 80 35

Wool/Silk 30 °C

2)

2 0.31 48 60 30

Standard cotton programmes

Standard 60 °C cot-

ton

8 1.02 55 242 52

Standard 60 °C cot-

ton

4 0.78 45 211 52

Standard 40 °C cot-

ton

4 0.59 45 191 52

1)

At the end of spin phase.

2)

Not available for some models.

Off Mode (W) Left On Mode (W)

0,48 0,48

The information given in the chart above are in compliance with the EU Commission regu-

lation 1015/2010 implementing directive 2009/125/EC.

7. OPTIONS

7.1 Start/Pause

Press button Start/Pause to start or

interrupt a programme.

7.2 Delay Start

With this option you can delay the start

of a programme from 30 minutes to 20

hours.

ENGLISH 13

The display shows the related indicator

and delay time.

7.3 Time Save

With this option you can decrease the

programme duration.

• Press this button one time to set

'Shortened duration' for items with

daily soil.

• Press this button two times to set

'Extra Quick' for items with almost no

soil.

Some programmes accept

only one of the two options.

7.4 Extra Rinse

With this option you can add some rinses

to a washing programme.

Use this option for persons allergic to

detergents and in areas where the water

is soft.

The related indicator comes on.

7.5 Stains/Prewash

Press this button to add the stain and/or

a prewash phase to a programme.

Press the button again and again to

activate one or two options. The related

symbol and the indicator bar comes on

in the display.

• Stains: Use this option for laundry

with hard stains to remove.

When you set this option, put the

stain remover into compartment .

This function increases the

programme duration.

This option is not

available with a

temperature lower than

40° C.

• Prewash: Use this option to add a

prewash phase before the washing

phase.

We recommend that you use this

option when you have laundry with a

high level of soil.

The set of this option

increases the programme

duration.

7.6 Spin

Press this button to:

• Decrease the maximum speed of the

spin phase of the programme.

The display shows only

the spin speeds available

with the set programme.

• Deactivate the spin phase.

• Activate the Rinse Hold function.

Set this function to prevent fabric

creases. The appliance does not drain

the water when the programme is

completed.

7.7 Temperature

Press this button to change the default

temperature. When the display shows

and , the appliance does not heat

the water.

8.

SETTINGS

8.1 Acoustic signals

The acoustic signals operate when:

• You activate the appliance.

• You deactivate the appliance.

• You press the buttons.

• The programme is completed.

• The appliance has a malfunction.

To deactivate/activate the acoustic

signals, press and at the same

time for 6 seconds.

If you deactivate the

acoustic signals, they

continue operate when the

appliance has a malfunction.

8.2 Child Lock

With this option you can prevent that the

children play with the control panel.

• To activate/deactivate this option,

press

and at the same time

www.aeg.com14

until the indicator comes on/goes

off.

You can activate this option:

• After you press Start/Pause : the

options and the programme knob are

locked.

• Before you press Start/Pause : the

appliance cannot start.

8.3 Permanent Extra Rinse

With this option you can permanently

have an extra rinse when you set a new

programme.

• To activate/deactivate this option

press and at the same time

until the indicator Extra Rinse comes

on/goes off.

9. BEFORE FIRST USE

1. Put 2 litre of water in the detergent

compartment for washing phase.

This activates the drain system.

2. Put a small quantity of detergent in

the compartment for washing phase.

3. Set and start a programme for cotton

at the highest temperature without

laundry.

This removes all possible dirt from the

drum and the tub.

10. DAILY USE

WARNING!

Refer to Safety chapters.

10.1 Activating the appliance

1. Open the water tap.

2. Connect the mains plug to the mains

socket.

3. Press button On/Off to activate the

appliance.

A short tune sounds.

10.2 Loading the laundry

1. Open the appliance door

2. Put the laundry in the drum, one item

at a time.

3. Shake the items before you put them

in the appliance.

Make sure not to put too much laundry

in the drum.

4. Close the door firmly.

CAUTION!

Make sure that no laundry

stays between the seal and

the door. There is a risk of

water leakage or damage to

the laundry.

ENGLISH 15

10.3 Filling the detergent and

additives

Compartment for prewash phase,

soak programme or stain remover.

Compartment for washing phase.

Compartment for liquid additives

(fabric conditioner, starch).

Maximum level for quantity of liquid

additives.

Flap for powder or liquid detergent.

Always obey the instructions

that you find on the

packaging of the detergent

products.

10.4 Check the position of the

flap

1. Pull out the detergent dispenser until

it stops.

2. Press the lever down to remove the

dispenser.

1

2

3. To use powder detergent, turn the

flap up.

A

4.

To use liquid detergent, turn the flap

down.

B

With the flap in the

position DOWN:

• Do not use

gelatinous or thick

liquid detergents.

• Do not put more

liquid detergent than

the limit showed in

the flap.

• Do not set the

prewash phase.

• Do not set the delay

start function.

5. Measure out the detergent and the

fabric conditioner.

6. Carefully close the detergent

dispenser.

Make sure that the flap does not cause a

blockage when you close the drawer.

10.5 Setting a programme

1. Turn the programme knob. The

related programme indicator comes

on.

www.aeg.com

16

The indicator of button Start/Pause

flashes with red colour.

The display shows the default

temperature, the spin speed and the

empty indicator bars of the available

functions.

2. To change the temperature and/or

the spin speed, press the related

buttons.

3. Set the available functions.

10.6 Starting a programme

without the delay start

Press button Start/Pause to start the

programme.

The relevant indicator stops to flash and

stays on.

On the display the indicator of the phase

is operation starts to flash.

The programme starts, the door is

locked. The display show the indicator

.

The drain pump can operate

for a short time when the

appliance fills water.

10.7 Starting a programme

with the delay start

1. Press button Delay Start again and

again until the display shows the

number of minutes or hours of delay.

The related indicator comes on.

2. Press button Start/Pause.

The appliance starts the countdown of

the delay start.

When the countdown is completed, the

programme starts automatically.

Before you press button

Start/Pause to start the

appliance, you can cancel or

change the set of the delay

start.

10.8 Cancelling the delay start

To cancel the delay start:

1. Press button Start/Pause to set the

appliance to pause.

The related indicator flashes.

2. Press button Delay Start repeatedly

until the display shows .

3.

Press button Start/Pause again to

start the programme immediately.

10.9 Behaviour of the

appliance

After approximately 15

minutes from the start of the

programme:

• The appliance adjusts

automatically the cycle

time to the laundry you

have put in the drum to

have perfect washing

results in the minimum

necessary time.

• The display shows the

new time value.

10.10 Cancelling a running

programme

1. Press button On/Off to cancel the

programme and to deactivate the

appliance.

2. Press button On/Off again to activate

the appliance.

Now, you can set a new washing

programme.

Before starting the new

programme the appliance

could drain the water. In this

case, make sure that the

detergent is still in the

detergent compartment, if

not fill the detergent again.

10.11 Interrupting a

programme and changing a

function

You can change only some options

before they operate.

1. Press button Start/Pause.

The related indicator flashes.

2. Change the function set.

3. Press the button Start/Pause again.

The programme continues.

ENGLISH

17

10.12 Opening the door when

the delay start is active

While the delay start operates, the

appliance door is locked.

To open the appliance door:

1. Press button Start/Pause.

In the display the door lock indicator

goes off.

2. Open the appliance door.

3. Close the door and press button

Start/Pause.

The delay start continues.

10.13 Opening the door when

the programme operates

CAUTION!

If the temperature and level

of the water in the drum are

too high, the door lock

indicator stays on and

you cannot open the door.

To open the door proceed as follows:

1. Press the button On/Off for some

seconds to deactivate the appliance.

2. Wait for some minutes and then

open carefully the appliance door.

3. Close the appliance door.

4. Activate the appliance and set the

programme again.

10.14 End of cycle

When the programme has finished, the

appliance stops automatically. The

acoustic signal operates (if it is active).

In the display comes on and the door

locked indicator

goes off.

The indicator of Start/Pause button goes

off.

1. Press button On/Off to deactivate

the appliance.

After five minutes from the end of the

programme, the energy saving function

automatically deactivates the appliance.

When you activate the

appliance again, the display

show the end of the last set

programme. Turn the

programme knob to set a

new cycle.

2. Remove the laundry from the

appliance.

3. Make sure that the drum is empty.

4. Keep the door ajar, to prevent

mildew and odours

10.15 Draining water out after

end of cycle

The washing programme is completed,

but there is water in the drum:

The drum turns regularly to prevent the

creases in the laundry.

The door lock indicator is on. The

door stays locked.

You must drain the water to open the

door:

1. If necessary, decrease the spin

speed.

2. Press the Start/Pause button.

The appliance drains the water and

spins.

3. When the programme is completed

and the door lock indicator goes

off, you can open the door .

4. Press On/Off some seconds to

deactivate the appliance.

The appliance drains and

spins automatically after

approximately18 hours.

10.16 AUTO Stand-by option

The AUTO Stand-by function

automatically deactivates the appliance

to decrease the energy consumption

when:

• You do not use the appliance for 5

minutes before you press Start/Pause

button.

Press the button On/Off to activate

the appliance again.

• After 5 minutes from the end of the

washing programme

Press the button On/Off to activate

the appliance again.

www.aeg.com

18

The display shows the end of the last

set programme.

Turn the programme knob to set a

new cycle.

If you set a programme or an

option that ends with water

in the drum, the AUTO

Stand-by function doesn't

deactivate the appliance to

remind you to drain the

water.

11. HINTS AND TIPS

WARNING!

Refer to Safety chapters.

11.1 The laundry load

• Divide the laundry in: white, coloured,

synthetics, delicates and wool.

• Obey the washing instructions that

are on the laundry care labels.

• Do not wash together white and

coloured items.

• Some coloured items can discolour

with the first wash. We recommend

that you wash them separately for the

first times.

• Button up pillowcases, close zippers,

hooks and poppers. Tie up belts.

• Empty the pockets and unfold the

items.

• Turn inside out multilayered fabrics,

wool and items with painted

illustrations.

• Remove hard stains.

• Wash with a special detergent heavy

soil stains.

• Be careful with the curtains. Remove

the hooks or put the curtains in a

washing bag or pillowcase.

• Do not wash in the appliance laundry

without hems or with cuts. Use a

washing bag to wash small and/or

delicate items (e.g. underwired bras,

belts, tights, etc. ).

• A very small load can cause balance

problems with the spin phase. If this

occurs, adjust manually the items in

the tub and start the spin phase

again.

11.2 Stubborn stains

For some stains, water and detergent is

not sufficient.

We recommend that you remove these

stains before you put the items in the

appliance.

Special stain removers are available. Use

the special stain remover that is

applicable to the type of stain and fabric.

11.3 Detergents and additives

• Only use detergents and additives

specially made for washing machines:

– powder detergents for all types of

fabric,

– powder detergents for delicate

fabrics (40 °C max) and woollens,

– liquid detergents, preferably for

low temperature wash

programmes (60 °C max) for all

types of fabric, or special for

woollens only.

• Do not mix different types of

detergents.

• To help the environment, do not use

more than the correct quantity of

detergent.

• Obey the instructions that you find on

the on packaging of these products.

• Use the correct products for the type

and colour of the fabric, the

programme temperature and the

level of soil.

• If your appliance has not the

detergent dispenser with the flap

device, add the liquid detergents with

a dosing ball (supplied by the

detergent's manufacturer).

11.4 Ecological hints

• Set a programme without the

prewash phase to wash laundry with

normal soil.

• Always start a washing programme

with the maximum load of laundry.

ENGLISH

19

• If necessary, use a stain remover when

you set a programme with a low

temperature.

• To use the correct quantity of the

detergent, check the water hardness

of your domestic system

11.5 Water hardness

If the water hardness in your area is high

or moderate, we recommend that you

use a water softener for washing

machines. In areas where the water

hardness is soft it is not necessary to use

a water softener.

To know the water hardness in your area,

contact your local water authority.

Use the correct quantity of the water

softener. Obey the instructions that you

find on the packaging of the product.

12. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

12.1 External cleaning

Clean the appliance only with soap and

warm water. Fully dry all the surfaces.

CAUTION!

Do not use alcohol, solvents

or chemical products.

12.2 Descaling

If the water hardness in your area is high

or moderate, we recommend that you

use a water descaling product for

washing machines.

Regularly examine the drum to prevent

limescale and rust particles.

To remove rust particles use only special

products for washing machine. Do this

separately from the laundry wash.

Always obey the instructions

that you find on the

packaging of the product.

12.3 Maintenance wash

With the low temperature programmes it

is possible that some detergent stays in

the drum. Make regularly a maintenance

wash. To do this:

• Remove the laundry from the drum.

• Set the cotton programme with the

highest temperature with a small

quantity of detergent.

12.4 Door seal

Regularly examine the seal and remove

all objects from the inner part.

12.5 Cleaning the drum

Regularly examine the drum to prevent

limescale and rust particles. Only use

special products to remove rust particles

from the drum.

We suggest you to:

1. Clean the drum with special product

for stainless steel.

2. Start a short programme for cotton at

the maximum temperature with a

small quantity of detergent.

www.aeg.com

20

La page charge ...

AEG L83480SFL Manuel utilisateur

AEG L83480SFL Manuel utilisateur

dans d''autres langues

Documents connexes