UGREEN LP586 Mode d'emploi

Taper
Mode d'emploi
껷妃⢪欽》♴た渷⿡ꤑ黔䱽㐼歏彂➩⚥涸ꥬ歏晙կ
黔䱽㐼鲮荛胜꬗》♴黔䱽㐼䏀渷〳刿䰃꛵䩾歏寑$3
⢪欽⚥㼭䗱㣪䩛կ
劥㉁ㅷ霼⺡雮㿨⟄♴⯄留梖罞⢪欽霼⺡ふ굹կ
霼⺡荈遤䬒䒓䧴佖鄳劥❡ㅷկ
霼⺡㼜劥❡ㅷ㶸佞㖈惐弪梠㞯⚥կ
霼⺡㼜❡ㅷꬑ鵛掚彂կ
霼⺡㼜宐䧴Ⱖ㸐巊⡤崨Ⰶ劥❡ㅷⰻ鿈㼋荝劥❡ㅷ䰀㗁կ
⢪欽♲膃卹
覰暅鵶䱹
䩧䒓䏀鿈♲膃卹䬘䒓
䬘勍䪾♲膃卹佞㖈䎂
珘涸宐䎂꬗♳կ
Ɤ䭽黔䱽㐼䬝撑ꝶ猲綁
抧꡸捌鵳Ⰶ覰暅ꂁ㼆朐
䙖䩧䒓䩛劼畮鵳Ⰶ覰
暅䵂程朐䙖㖈䵂程霃
㢊⚥挿ⴁ%JTQIP
鵶䱹䧭⸆た黔䱽㐼綁
抧擆抣կ
㔿㹁䩛劼
䩧䒓䩛劼佅卹䪾䩛劼
㸝Ⰼ㸝縨㖈䩛劼佅卹ⰻ
佅卹鿈⟧〳o偒鲮
⢪欽կ
鸑欽ⲇꬲ〡〳鷥
刿䰃ꂁ⟝
佅卹霃剣鸑欽ⲇꬲ〡畮
〡〳㸝鄳띌⯘굥邉⯕
抧⢪欽կ
䪾佅卹》♴勻搬た䪾
轠勍㸝鄳կ
Dispho
覰暅
〳欽霃㢊
覰暅鵥㔐
鸑欽薉ⵖ轠勍
刿䰃黔䱽㐼歏寑
险デ
佅卹霃剣鸑欽薉ⵖ轠
勍〳㸝鄳鷓欽涸ꂁ⟝⢪
欽կ
N䨪㢪晜
乼⡲霹僈
*On first use, remove rear cover of remote controller and take insulator
out of battery chamber.
Remove rear cover of remote controller and replace button battery
(CR1632).
1. Watch your hands during use.
2. The product is not designed for children under 14 years old.Do not
swallow it.
3. Do not dismantle or modify the product.
4. Do not store the product in a humid environment.
5. Keep the product away from heat sources.
6. Do not expose the product to water or other liquids in caseof
damage.
5.REPLACE THE ACCESSORIES
Take the bracket o and put it
Screw installation
6.UNIVERSAL 1/4 BRITISH
SCREW ROD
Battery replace of the remote control
Warnings
The 1/4 British Screw Rodcan
be connected to the adaptable
live broadcast accessories to
expand the multi-functional
usage scenarios.
S5[ZJUUX<KXYOUT
/TYZX[IZOUTY,UX
9KRLOK9ZOIQ:XOVUJ
2.USE TRIPOD
1.BLUETOOTH PAIRING
This product comes with
a tripod. Open the selfie
holder from the bottom
and fix it on a steady
horizontal plane.
Power on after long pressing
the power button for 3
seconds,then turn on the
phone bluetooth to enter
search condition,and click
"Dispho" in the searched
equipment.Green light of
the remote control will be
o
after connected.
3.FIX THE PHONE
Rotate the phone holder
till you can pull open the
holder handle and fix the
phone securely on the
holder.
4.UNIVERSAL COLD SHOE
PORT OPTIONAL
The cold shoe port can be
connected to the adaptable
live broadcast accessories
to expand the multi-
functional usage scenarios.
Dispho
Bluetooth
Available equipment
BluetoothReturn
䒓ꝉ
Open Lock
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
ЬReorient or relocate the receiving antenna.
ЬIncrease the separation between the equipment and receiver.
ЬConnect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
ЬConsult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modications to this device not explicitly approved by manufacturer
could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
ISED Statement
ϋ English: This device complies with Industry Canada licenseϋexempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference, including interference that
may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICESϋ3 (B)/NMBϋ3(B).
- French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appare
ils radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes: (1) l'a
ppareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout b
rouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonct
ionnement. L'appareil numérique est conforme à CAN CAN ICES-3 (B) / NMB-3 (B).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102
and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF
exposure and compliance.
cet appareil est conforme à l'exemption des limites d'évaluation courante dans la section 2.5
du cnr - 102 et conformité avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir
des données canadiennes sur l'exposition aux champs rf et la conformité.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled
environment.
Cet équipement est conforme aux limites d'exposition aux rayonnements du Canada établies
pour un environnement non contrôlé.
RF Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be
used installed and operated with minimum distance 0mm between the radiator and your
body.
L'appareil a été évalué pour répondre aux exigences générales d'exposition aux RF.Cet
équipement doit être installé et utilisé avec une distance minimale de 0 mm entre le
radiateur et votre corps.
  • Page 1 1
  • Page 2 2
  • Page 3 3

UGREEN LP586 Mode d'emploi

Taper
Mode d'emploi

dans d''autres langues