TAT1235
MICRO-USB
TAT1235
3
5
Multi-function panel (touch control)
USB C charging slot
5
first
• Charging process is verified by
the LED light. The blue light flashes
on the front panel,
• When the charging case is fully
charged,the blue light stops flashing.
While charing earpieces, Blue LED will flash.
Blue LED stops flashing and keeps lighting
on, means fully charged.
TAT1235
TAT1235
Blue LED
ashes once
for 10s
LED ashes
alternately in
white and blue
Auto power on: take the earpieces
from charging case; Manual power
on: press on both earpieces and
hold the multi-functions panels for
approximately 3s.
first
TAT1235
TAT1235
Take the L / R earpieces from the
charging case, the earpiece will
power on automatically. There will
be a voice " Power on" from L / R
earpiece.
4
If you’d like to switch from single earpiece
pairing to dual earpieces pairing mode,
please try below 2ways.
4.1 Put both L and R earpieces back into power
case and then take the 2 earpieces out to pair
and connect Bluetooth again;
4.2 If still not works, try to reset. Put L&R into power
case and press the button for 4 seconds until the
white LED ashes. Then take L&R out of power
case and select BT, connect Bluetooth again. ”
Backward
Forward
The LED in
charging case
flashes.
Only the blue LED
flashes.
The red LED is
lightening.
click
click
click
click
click
click
click
click
TAT1235
TAT1235
6
1.5
55
5.1
9
4
8
12
5
TAT1235
ashes
ashes
TAT1235
14382-20-12451
“Este equipamento não tem direito à proteção contra
interferência prejudicial e não pode causar interferência
em sistemas devidamente autorizados.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
Philips TAT1235RD/97 Manuel utilisateur
- Taper
- Manuel utilisateur
- Ce manuel convient également à
dans d''autres langues
- English: Philips TAT1235RD/97 User manual