AEG FSK93848P Manuel utilisateur

USER

MANUAL

EN User Manual 2

Dishwasher

FR Notice d'utilisation 34

Lave-vaisselle

FSK93848P

CONTENTS

1. SAFETY INFORMATION......................................................................................3

2. SAFETY INSTRUCTIONS.................................................................................... 5

3. PRODUCT DESCRIPTION...................................................................................7

4. CONTROL PANEL................................................................................................7

5. PROGRAMME SELECTION.................................................................................9

6. BASIC SETTINGS ............................................................................................. 11

7. WIRELESS CONNECTION................................................................................ 15

8. BEFORE FIRST USE..........................................................................................17

9. DAILY USE......................................................................................................... 18

10. HINTS AND TIPS..............................................................................................22

11. CARE AND CLEANING.................................................................................... 23

12. TROUBLESHOOTING......................................................................................27

13. TECHNICAL INFORMATION............................................................................32

My AEG Kitchen app

www.aeg.com2

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you

impeccable performance for many years, with innovative technologies that help

make life simpler – features you might not find on ordinary appliances. Please

spend a few minutes reading to get the very best from it.

Visit our website to:

Get usage advice, brochures, trouble shooter, service and repair information:

www.aeg.com/support

Register your product for better service:

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the

following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully

read the supplied instructions. The manufacturer is not

responsible for any injuries or damage that are the result

of incorrect installation or usage. Always keep the

instructions in a safe and accessible location for future

reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning the use of the appliance in a

safe way and understand the hazards involved.

ENGLISH 3

• Children between 3 and 8 years of age and persons

with very extensive and complex disabilities shall be

kept away from the appliance unless continuously

supervised.

• Children of less than 3 years of age should be kept

away from the appliance unless continuously

supervised.

• Do not let children play with the appliance.

• Keep detergents away from children.

• Keep children and pets away from the appliance when

the door is open.

• Children shall not carry out cleaning and user

maintenance of the appliance without supervision.

1.2 General Safety

• This appliance is intended to be used in household

and similar applications such as:

– farm houses; staff kitchen areas in shops, offices

and other working environments;

– by clients in hotels, motels, bed & breakfast and

other residential type environments.

• Do not change the specification of this appliance.

• The operating water pressure (minimum and

maximum) must be between 0.5 (0.05) / 8 (0.8) bar

(MPa)

• Follow the maximum number of 14 place settings.

• If the supply cord is damaged, it must be replaced by

the manufacturer, its Authorised Service Centre or

similarly qualified persons in order to avoid a hazard.

• WARNING: Knives and other utensils with sharp

points must be loaded in the basket with their points

down or placed in a horizontal position.

• Do not leave the appliance with the open door

unattended to avoid stepping accidentally onto it.

• Before any maintenance operation, deactivate the

appliance and disconnect the mains plug from the

socket.

www.aeg.com4

• Do not use high pressure water sprays and/or steam

to clean the appliance.

• If the appliance has ventilation openings in the base,

they must not be covered e.g. by a carpet.

• The appliance is to be connected to the water mains

using the new supplied hose-sets. Old hose sets must

not be reused.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Do not use the appliance before

installing it in the built-in structure due

to safety manner.

• Follow the installation instructions

supplied with the appliance.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Do not install or use the appliance

where the temperature is less than

0 °C.

• Install the appliance in a safe and

suitable place that meets installation

requirements.

2.2 Electrical connection

WARNING!

Risk of fire and electric

shock.

• The appliance must be earthed.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Always use a correctly installed

shockproof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug and to the mains

cable. Should the mains cable need to

be replaced, this must be carried out

by our Authorised Service Centre.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• This appliance is fitted with a 13 A

mains plug. If it is necessary to

change the mains plug fuse, use only

a 13 A ASTA (BS 1362) fuse (UK and

Ireland only).

2.3 Water connection

• Do not cause damage to the water

hoses.

• Before connection to new pipes, pipes

not used for a long time, where repair

work has been carried out or new

devices fitted (water meters, etc.), let

the water flow until it is clean and

clear.

• Ensure that there are no visible water

leaks during and after the first use of

the appliance.

• The water inlet hose has a safety

valve and a sheath with an inner

mains cable.

ENGLISH 5

WARNING!

Dangerous voltage.

• If the water inlet hose is damaged,

immediately close the water tap and

disconnect the mains plug from the

mains socket. Contact the Authorised

Service Centre to replace the water

inlet hose.

2.4 Use

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

• Dishwasher detergents are

dangerous. Follow the safety

instructions on the detergent

packaging.

• Do not drink and play with the water in

the appliance.

• Do not remove the dishes from the

appliance until the programme is

complete. Some detergent may

remain on the dishes.

• Do not store items or apply pressure

on the open door of the appliance.

• The appliance can release hot steam

if you open the door while a

programme operates.

2.5 Internal lighting

WARNING!

Risk of injury.

• Concerning the lamp(s) inside this

product and spare part lamps sold

separately: These lamps are intended

to withstand extreme physical

conditions in household appliances,

such as temperature, vibration,

humidity, or are intended to signal

information about the operational

status of the appliance. They are not

intended to be used in other

applications and are not suitable for

household room illumination.

• This appliance has an internal lamp

that comes on when you open the

door and goes off when the door is

closed.

• To replace the internal lighting,

contact the Authorised Service

Centre.

2.6 Service

• To repair the appliance contact the

Authorised Service Centre. Use

original spare parts only.

• Please note that self-repair or non-

professional repair can have safety

consequences and might void the

guarantee.

• The following spare parts will be

available for 7 years after the model

has been discontinued: motor,

circulation and drain pump, heaters

and heating elements, including heat

pumps, piping and related equipment

including hoses, valves, filters and

aquastops, structural and interior

parts related to door assemblies,

printed circuit boards, electronic

displays, pressure switches,

thermostats and sensors, software

and firmware including reset software.

Please note that some of these spare

parts are only available to

professional repairers, and that not all

spare parts are relevant for all

models.

• The following spare parts will be

available for 10 years after the model

has been discontinued: door hinge

and seals, other seals, spray arms,

drain filters, interior racks and plastic

peripherals such as baskets and lids.

2.7 Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent

children and pets to get closed in the

appliance.

www.aeg.com6

3. PRODUCT DESCRIPTION

5

4

9

67

13

12

11

10

14

2

3

1

8

1

Ceiling spray arm

2

Upper spray arm

3

Lower spray arm

4

Filters

5

Rating plate

6

Salt container

7

Air vent

8

Rinse aid dispenser

9

Detergent dispenser

10

ComfortLift basket

11

Trigger handle

12

Lower basket handle

13

Upper basket

14

Cutlery drawer

3.1 Internal light

The appliance has an internal lamp. It

comes on when you open the door or

switch the appliance on while the door is

open.

The lamp goes off when you close the

door or switch the appliance off.

Otherwise, it goes off automatically after

some time to save energy.

4. CONTROL PANEL

1 2 3

4 5 6

1

On/Off button / Reset button

ENGLISH 7

2

Delay Start button / Remote start

button

3

Display

4

MY TIME selection bar

5

EXTRAS buttons

6

AUTO Sense program button

4.1 Display

The display shows the following

information:

• ECOMETER

• Indicators

• Programme names and durations

• Delay start time

• Information texts

4.2 ECOMETER

The ECOMETER indicates how the

programme selection impacts energy

and water consumption. The more bars

are on, the lower the consumption is.

indicates the most environmentally

friendly programme selection for a

normally soiled load.

4.3 Indicators

Indicator Description

Rinse aid indicator. It is on when the rinse aid dispenser needs refilling.

Refer to "Before first use".

Salt indicator. It is on when the salt container needs refilling. Refer to "Be‐

fore first use".

Machine Care indicator. It is on when the appliance needs internal clean‐

ing with the Machine Care programme. Refer to "Care and cleaning".

Drying phase indicator. It is on when you select a programme with the dry‐

ing phase. It flashes when the drying phase operates. Refer to "Pro‐

gramme selection".

Wi-Fi indicator. It is on when you activate the wireless connection. Refer to

"Wireless connection".

Remote start indicator. It is on when you activate the remote start. Refer to

"Daily use".

Delay Start indicator. It is on when you set the delay start. Refer to "Daily

use".

Pause indicator. It flashes when you pause a wash cycle or the delay

countdown by opening the appliance door. Refer to "Daily use".

www.aeg.com8

Indicator Description

Alert indicators. They are on when a malfunction of the appliance occurs.

Refer to "Troubleshooting".

5. PROGRAMME SELECTION

5.1 MY TIME

Using MY TIME selection bar, you can

select a suitable wash cycle based on

programme duration, ranging from 30

minutes to four hours.

CA B D E

A. Quick is the shortest programme

(30min) suitable for washing a load

with fresh and light soil.

B. 1h is a programme suitable for

washing a load with fresh and lightly

dried-on soil.

C. 1h 30min is a programme suitable

for washing and drying normally

soiled items.

D. 2h 40min is a programme suitable

for washing and drying heavily soiled

items.

E. ECO is the longest programme (4h)

offering the most efficient use of

energy and water consumption for

crockery and cutlery with normal soil.

This is the standard programme for

test institutes.

1)

5.2 EXTRAS

You can adjust the programme selection

to your needs by activating EXTRAS.

ExtraSilent

ExtraSilent allows to reduce the noise

generated by the appliance. When the

option is activated, the wash pump works

quietly at a lower speed. Due to the low

speed, the programme duration is longer.

ExtraPower

ExtraPower improves the washing

results of the selected programme. The

option increases the wash temperature

and duration.

GlassCare

GlassCare provides special care for a

delicate load. The option prevents rapid

changes in the wash temperature of the

selected programme and reduces it to

45 °C. This protects glassware in

particular from damaging.

5.3 AUTO Sense

The AUTO Sense program automatically

adjusts the wash cycle to the type of

load.

The appliance senses the degree of soil

and the amount of dishes in the baskets.

It adjusts the temperature and quantity of

water as well as the wash duration.

1)

This programme is used to assess compliance with the Ecodesign Comission Regulation (EU)

2019/2022.

ENGLISH 9

5.4 Programmes overview

Pro‐

gramme

Type of load Degree of

soil

Programme phases EXTRAS

Quick • Crockery

• Cutlery

• Fresh • Wash 50 °C

• Intermediate rinse

• Final rinse 45 °C

• AirDry

• ExtraPower

• GlassCare

1h • Crockery

• Cutlery

• Fresh

• Lightly

dried-on

• Wash 60 °C

• Intermediate rinse

• Final rinse 50 °C

• AirDry

• ExtraPower

• GlassCare

1h 30min • Crockery

• Cutlery

• Pots

• Pans

• Normal

• Lightly

dried-on

• Wash 60 °C

• Intermediate rinse

• Final rinse 55 °C

• Drying

• AirDry

• ExtraPower

• GlassCare

2h 40min • Crockery

• Cutlery

• Pots

• Pans

• Normal to

heavy

• Dried-on

• Prewash

• Wash 60 °C

• Intermediate rinse

• Final rinse 60 °C

• Drying

• AirDry

• ExtraPower

• GlassCare

ECO • Crockery

• Cutlery

• Pots

• Pans

• Normal

• Lightly

dried-on

• Prewash

• Wash 50 °C

• Intermediate rinse

• Final rinse 55 °C

• Drying

• AirDry

• ExtraPower

• GlassCare

• ExtraSilent

AUTO

Sense

• Crockery

• Cutlery

• Pots

• Pans

The pro‐

gramme ad‐

justs to all de‐

grees of soil.

• Prewash

• Wash 50 - 60 °C

• Intermediate rinse

• Final rinse 60 °C

• Drying

• AirDry

EXTRAS are not

applicable to this

programme.

Machine

Care

• No load The pro‐

gramme

cleans the ap‐

pliance interi‐

or.

• Wash 70 °C

• Intermediate rinse

• Final rinse

• AirDry

EXTRAS are not

applicable to this

programme.

Consumption values

Programme

1)

2)

Water (l) Energy (kWh) Duration (min)

Quick 9.3 - 11.4 0.54 - 0.66 30

www.aeg.com10

Programme

1)

2)

Water (l) Energy (kWh) Duration (min)

1h 10.6 - 12.9 0.80 - 0.93 60

1h 30min 10.4 - 12.7 0.97 - 1.10 90

2h 40min 10.8 - 13.2 0.97 - 1.11 160

ECO 11 0.848 240

AUTO Sense 9.6 - 13.1 0.74 - 1.06 120 - 170

Machine Care 8.9 - 10.9 0.58 - 0.70 60

1)

The pressure and the temperature of the water, the variations of the mains supply, the options, the

quantity of dishes and the degree of soil can change the values.

2)

The values for programmes other than ECO are indicative only.

Information for test institutes

To receive the necessary information for

conducting performance tests (e.g.

according to EN60436), send an email

to:

[email protected]

In your request, include the product

number code (PNC) from the rating plate.

For any other questions regarding your

dishwasher, refer to the service book

provided with your appliance.

6. BASIC SETTINGS

You can configure the appliance by

changing basic settings according to

your needs.

Settings Values Description

Water hardness From level 1 to level

10 (default: 5)

Adjust the level of the water softener accord‐

ing to the water hardness in your area.

1)

Rinse aid level From level 0 to level

6 (default: 4)

Adjust the level of the rinse aid according to

the necessary dosage.

1)

End sound ON

OFF (default)

Activate or deactivate the acoustic signal for

the end of a programme.

1)

Auto door open ON (default)

OFF

Activate or deactivate AirDry.

1)

Key tones ON (default)

OFF

Activate or deactivate the sound of the but‐

tons when pressed.

Latest prog. selec‐

tion

ON

OFF (default)

Enable or disable the automatic selection of

the most recently used programme and op‐

tions.

1)

ENGLISH 11

Settings Values Description

Display on floor ON (default)

OFF

Activate or deactivate TimeBeam.

1)

Brightness From level 0 to level

9

Adjust the brightness of the display.

Language List of languages

(default: English)

Set the preferred language.

Reset settings YES

NO

Reset the appliance to the factory settings.

WiFi ON

OFF (default)

Activate or deactivate the wireless connec‐

tion.

2)

Network Signal strength

IP

MAC

Check the information about the network

connection.

Forget network YES

NO

Reset the network credentials.

2)

PNC number Number

Check the PNC number of your appliance.

1)

For more details, refer to the information provided in this chapter.

2)

For more details, refer to the chapter "Wireless connection".

6.1 Setting mode

How to navigate in setting

mode

You can navigate in setting mode using

MY TIME selection bar.

BA C

A. Previous button

B. OK button

C. Next button

Use Previous and Next to switch

between the basic settings and to

change their value.

Use OK to enter the selected setting and

to confirm changing its value.

How to enter setting mode

You can enter setting mode before

starting a programme. You cannot enter

setting mode while the programme is

running.

To enter setting mode, press and hold

simultaneously

and for

about 3 seconds.

• The lights related to the

Previous, OK and Next are on.

• The display shows the first

available setting and its current

value.

How to change a setting

Make sure the appliance is in setting

mode.

1. Use Previous or Next to select the

desired setting.

The display shows the setting name and

its current value.

2. Press OK to enter the setting.

The display shows available values.

www.aeg.com12

3. Press Previous or Next to change

the value.

4. Press OK to confirm the setting.

• The new setting is saved.

• The appliance returns to the basic

settings list.

5. Press and hold simultaneously

and for about 3

seconds to exit setting mode.

The appliance returns to the programme

selection.

The saved settings remain valid until you

change them again.

6.2 The water softener

The water softener removes minerals

from the water supply, which would have

a negative effect on the washing results

and on the appliance.

The higher the content of these minerals,

the harder your water is. Water hardness

is measured in equivalent scales.

The water softener should be adjusted

according to the hardness of the water in

your area. Your local water authority can

advise you on the hardness of the water

in your area. It is important to set the

right level of the water softener to assure

good washing results.

Water hardness

German de‐

grees (°dH)

French de‐

grees (°fH)

mmol/l Clarke de‐

grees

Water softener lev‐

el

47 - 50 84 - 90 8.4 - 9.0 58 - 63 10

43 - 46 76 - 83 7.6 - 8.3 53 - 57 9

37 - 42 65 - 75 6.5 - 7.5 46 - 52 8

29 - 36 51 - 64 5.1 - 6.4 36 - 45 7

23 - 28 40 - 50 4.0 - 5.0 28 - 35 6

19 - 22 33 - 39 3.3 - 3.9 23 - 27

5

1)

15 - 18 26 - 32 2.6 - 3.2 18 - 22 4

11 - 14 19 - 25 1.9 - 2.5 13 - 17 3

4 - 10 7 - 18 0.7 - 1.8 5 - 12 2

<4 <7 <0.7 < 5

1

2)

1)

Factory setting.

2)

Do not use salt at this level.

Regardless of the type of detergent

used, set the proper water hardness

level to keep the salt refill indicator

active.

Multi-tabs containing salt are

not effective enough to

soften hard water.

Regeneration process

For the correct water softener operation,

the resin of the softener device needs to

be regenerated regularly. This process is

automatic and is the part of the normal

dishwasher operation.

When the prescribed quantity of water

(see values in the table) has been used

since the previous regeneration process,

a new regeneration process will be

initiated between the final rinse and the

programme end.

ENGLISH 13

Water softener lev‐

el

Amount of water

(l)

1 250

2 100

3 62

4 47

5 25

6 17

7 10

8 5

9 3

10 3

In case of the high water softener setting,

it may occur also in the middle of the

programme, before the rinse (twice

during a programme). Regeneration

initiation has no impact on the cycle

duration, unless it occurs in the middle of

a programme or at the end of a

programme with a short drying phase. In

that cases, the regeneration prolongs the

total duration of a programme by

additional 5 minutes.

Subsequently, the rinsing of the water

softener that lasts 5 minutes may begin

in the same cycle or at the beginning of

the next programme. This activity

increases the total water consumption of

a programme by additional 4 litres and

the total energy consumption of a

programme by additional 2 Wh. The

rinsing of the softener ends with a

complete drain.

Each performed softener rinse (possible

more than one in the same cycle) may

prolong the programme duration by

another 5 minutes when it occurs at any

point at the beginning or in the middle of

a programme.

All the consumption values

mentioned in this section are

determined in accordance

with the currently applicable

standard in laboratory

conditions with water

hardness 2.5mmol/L

according to the 2019/2022

regulation (water softener:

level 3).

The pressure and the

temperature of water as well

as the variations of the

mains supply can change

the values.

6.3 Rinse aid level

The rinse aid helps to dry the dishes

without streaks and stains. It is

automatically released during the hot

rinse phase. It is possible to set the

released quantity of rinse aid.

When the rinse aid dispenser is empty,

the display shows the indicator and

Rinse aid low. If the drying results are

satisfactory while using multi-tablets only,

it is possible to deactivate the dispenser

and the refill notification. However, for

best drying performance, always use

rinse aid and keep the notification active.

To deactivate the rinse aid dispenser and

the notification, set the rinse aid level to

0.

6.4 End sound

You can activate an acoustic signal that

sounds when the programme is

completed.

Acoustic signals sound also

when a malfunction of the

appliance occurs. It is not

possible to deactivate these

signals.

6.5 AirDry

AirDry improves the drying results. The

appliance door opens automatically

during the drying phase and remains

ajar.

www.aeg.com14

AirDry is automatically activated with all

programmes.

The duration of the drying phase and the

door opening time vary depending on the

selected programme and options.

When AirDry opens the door, the display

shows the remaining time of the running

programme.

CAUTION!

Do not try to close the

appliance door within 2

minutes after automatic

opening. This can cause

damage to the appliance.

CAUTION!

If children have access to

the appliance, we advise to

deactivate AirDry. The

automatic opening of the

door may pose a danger.

6.6 Latest programme

selection

You can set the automatic selection of

the most recently used programme and

options.

The latest programme that was

completed before the appliance

deactivation is saved. It is then selected

automatically after you activate the

appliance.

When the latest programme selection is

disabled, the default programme is ECO.

6.7 TimeBeam

TimeBeam displays the following

information on the floor below the

appliance door:

• The programme duration when the

programme begins.

• 0:00 and CLEAN when the

programme is completed.

• DELAY and the countdown duration

when the delay start begins.

• An alarm code when the appliance

has a malfunction.

When AirDry opens the

door, TimeBeam is off. To

check the remaining time of

the running programme, look

at the control panel display.

6.8 PNC number

If you contact an Authorised Service

Centre, you need to provide the product

number code (PNC number) of your

appliance.

The number can be found on the rating

plate on the appliance door. You can

also check the number on the display.

Select PNC number from the setting list

to check the number.

7. WIRELESS CONNECTION

You can connect your dishwasher to the

home wireless network and then link it to

your mobile devices in My AEG Kitchen

app. This functionality allows you to

remotely control and monitor your

dishwasher.

ENGLISH 15

My AEG Kitchen app can be downloaded

from the app store on your mobile

device. The app is compatible with iOS

and Android operating systems. Check

the compatible versions of the operating

systems in the app store.

Router parameters

Frequency/

Protocol

Wi-Fi: 2.4 GHz / 802.11

b-g-n

Wi-Fi: 5 GHz / 802.11 a-n

(for indoor use only)

Bluetooth Low Energy

5.0: 2.4 GHz / DSSS

Max Power Wi-Fi 2.4 GHz: <20 dBm

Wi-Fi 5 GHz: <23 dBm

Bluetooth Low Energy

5.0: < 20 dBm

Encryption WPA, WPA2

7.1 How to connect the

dishwasher to the network

and to the app

To connect your dishwasher, you need:

• Wireless network with the Internet

connection.

• Mobile device connected to the

wireless network.

1. Launch My AEG Kitchen app on your

mobile device and follow the

instructions in the app. When

prompted in the app, activate the

wireless connection in the

dishwasher.

2. To activate the wireless connection,

follow one of the two methods:

• Press and hold simultaneously

and for 2 seconds.

• Enter setting mode, select the

setting WiFi and change its

values to ON.

The display shows Wi-Fi is starting up

and then Wi-Fi is ready.

3. When prompted, enter the home

network credentials in My AEG

Kitchen app.

If the credentials are not

entered, the dishwasher

deactivates the wireless

connection after some time.

If the connection is successful, the

dishwasher displays Connection

successful. Refer to "Daily use"

chapter to activate remote start.

If the connection is

unsuccessful or the display

shows Updating, refer to

"Troubleshooting".

If you want to cancel the procedure,

press any active button and confirm the

cancellation. Alternatively, deactivate

and activate the appliance.

7.2 How to deactivate the

wireless connection

Enter setting mode, select the setting

WiFi and change its value to OFF.

7.3 How to activate the

wireless connection

Enter setting mode, select the setting

WiFi and change its value to ON.

Refer to "Daily use" to activate the

remote start.

7.4 How to reset the network

credentials

If you want to connect to a different

wireless network or update the

credentials of the current network, reset

the network credentials.

Enter setting mode and activate the

setting Forget network.

The indicator is off.

Connect the dishwasher to the network

and to the app to enter new network

credentials. Refer to the instructions

provided earlier in this chapter.

www.aeg.com16

8. BEFORE FIRST USE

1. Make sure that the current level of

the water softener agrees with the

hardness of the water supply. If

not, adjust the level of the water

softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start the programme Quick to

remove any residuals from the

manufacturing process. Do not use

detergent and do not put dishes in

the baskets.

After starting the programme, the

appliance recharges the resin in the

water softener for up to 5 minutes. The

washing phase starts only after this

procedure is complete. The procedure is

repeated periodically.

8.1 The salt container

CAUTION!

Use rough salt designed for

dishwashers only. Fine salt

increases the risk of

corrosion.

The salt is used to recharge the resin in

the water softener and to assure good

washing results in daily use.

How to fill the salt container

Make sure that the

ComfortLift basket is empty

and locked in the raised

position.

1. Turn the cap of the salt container

counterclockwise and remove it.

2. Put 1 litre of water in the salt

container (only for the first time).

3. Fill the salt container with dishwasher

salt (until it is full).

4. Carefully shake the funnel by its

handle to get the last granules inside.

5. Remove the salt around the opening

of the salt container.

6. Turn the cap of the salt container

clockwise to close the salt container.

CAUTION!

Water and salt can come out

of the salt container when

you fill it. After you fill the

salt container, immediately

start the shortest programme

to prevent corrosion. Do not

put dishes in the baskets.

ENGLISH 17

8.2 How to fill the rinse aid

dispenser

A

B

C

CAUTION!

The compartment (B) is for

rinse aid only. Do not fill it

with detergent.

CAUTION!

Only use rinse aid designed

specifically for dishwashers.

1. Open the lid (C).

2. Fill the dispenser (B) until the rinse

aid reaches the marking ''MAX''.

3. Remove the spilled rinse aid with an

absorbent cloth to prevent excessive

foam formation.

4. Close the lid. Make sure that the lid

locks into position.

Fill the rinse aid dispenser

when the indicator (A) is

clear.

9. DAILY USE

1. Open the water tap.

2. Press and hold until the appliance

is activated.

3. Fill the salt container if it is empty.

4. Fill the rinse aid dispenser if it is

empty.

5. Load the baskets.

6. Add the detergent.

7. Select and start a programme.

8. Close the water tap when the

programme is complete.

9.1 ComfortLift

CAUTION!

Do not sit on the rack or put

excessive pressure on the

locked basket.

CAUTION!

Do not exceed the max load

capacity of 18 kg.

CAUTION!

Make sure that items do not

stick out of the basket frame

as it can cause damage to

the items and the ComfortLift

mechanism.

The ComfortLift mechanism allows to lift

the lower rack up (to the second rack

level) and put it down to load and unload

dishes easily.

To load or unload the lower basket:

1. Lift the basket by pulling the rack out

of the dishwasher by the basket

handle. The trigger handle should not

be used.

www.aeg.com18

The basket is automatically locked on the

upper level.

2. Carefully place items in the basket or

remove them (refer to Basket

loading leaflet).

3. Lower the basket by connecting the

trigger handle with the basket frame

as shown below. Lift the trigger

handle completely and the basket

handle slightly until the basket is

disengaged on both sides.

Once the basket is unlocked, push

the rack down. The mechanism

returns to its default position on the

lower level.

There are two ways of lowering the

basket depending on the loading:

• If there is a full load of plates,

slightly push the basket down.

• If the basket is empty or half-

loaded, press the basket down.

9.2 Using the detergent

A

B

C

CAUTION!

Only use detergent

specifically designed for

dishwashers.

1. Press the release button (A) to open

the lid (C).

2. Put the detergent (gel, powder or

tablets) in the compartment (B).

3. If the programme has a prewash

phase, put a small quantity of

detergent on the inner part of the

appliance door.

4. Close the lid. Make sure that the lid

locks into position.

For information about the

detergent dosage, refer to

the manufacturer's

instructions on the

packaging of the product.

Usually, 20 - 25 ml of gel

detergent is adequate for

washing a load with normal

soil.

The upper ends of the two

vertical ribs inside the

compartment (B) indicate

the maximum level for filling

the dispenser with gel (max.

30ml).

9.3 Remote start

Activate this function to remotely control

and monitor your dishwasher in My AEG

Kitchen app.

ENGLISH 19

How to activate the remote

start

Make sure that the indicator is on and

your dishwasher is added in My AEG

Kitchen app. If not, refer to "Wireless

connection".

1. Press

.

• The light related to the button is

on.

• The indicator

is off.

• The indicator is on.

2. Close the appliance door.

3. Use My AEG Kitchen app to remotely

operate the appliance.

Opening the door

deactivates the remote start.

Refer to the information

provided further in this

chapter.

How to deactivate the remote

start

Press until the display shows 0h.

• The light related to the button is

off.

• The indicator is off.

• The indicator is on.

• The appliance returns to the

programme selection.

9.4 How to select and start a

programme using MY TIME

selection bar

1. Slide your finger across MY TIME

selection bar to choose a suitable

programme.

• The light related to the selected

programme is on.

• The ECOMETER indicates the

level of energy and water

consumption.

• The display shows the

programme duration.

2. Activate applicable EXTRAS if

desired.

3. Close the appliance door to start the

programme.

9.5 How to activate EXTRAS

1. Select a programme using MY TIME

selection bar.

2. Press the button dedicated to the

option you want to activate.

• The light related to the button is

on.

• The display shows the updated

programme duration.

• The ECOMETER indicates the

updated level of energy and water

consumption.

By default, options must be

activated every time before

you start a programme.

If the latest programme

selection is enabled, the

saved options are activated

automatically along with the

programme.

It is not possible to activate

or deactivate options while a

programme is running.

Not all options are

compatible with each other.

Activating options often

increases the water and

energy consumption as well

as the programme duration.

9.6 How to start the AUTO

Sense program

1. Press .

• The light related to the button is

on.

• The display shows the longest

possible program duration.

MY TIME and EXTRAS are

not applicable to this

program.

2. Close the appliance door to start the

program.

The appliance senses the type of load

and adjusts a suitable wash cycle.

During the cycle, the sensors operate

several times and the initial program

duration can decrease.

www.aeg.com20

La page charge ...

AEG FSK93848P Manuel utilisateur

AEG FSK93848P Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents