Danze D451279 Guide d'installation

Taper
Guide d'installation
D460024/D460025
D460026/D460027
D460035/D460036 D460055/D460056D460030 D461193
D460004/D460071
D460003
D451289 D451279 D461160 D461672
D460029/D460023
D462058/D460057
D460058/D460158
D460041/D460042
D460043/D460044
D460051/D460052
D460054
D460046/D460047
D460048
Need Help? Please call our toll-free Customer service line at 1-888-328-2383 or WWW.DANZE.COM for additional assistance or service.
Requiere asistencia? Favor llamar a nuestro servicio a clientes sin costo al 1-888-328-2383 o WWW.DANZE.COM para asistencia adicional o servicio.
Besoin d’aide? Veuillez communiquer avec notre service à la clientèle au numéro sans frais 1-888-328-2383 ou WWW.DANZE.COM pour obtenir du
service ou de l’aide additionnels.
Showerheads
Cabeza de ducha
Pomme de douche
Adjustable Wrench /Llave ajustable /Clé à molette
Needle-nose Pliers /Alicates de extremos finos / Pince à bec effilé
1. Remove the existing showerhead from the shower arm. Clean the debris from
the inside of the shower arm and the shower arm threads. Run water to flush
the residual debris from the inside arm (Fig 1).
2. Wrap the threads of the shower arm with the plumber's tape (included) (Fig 2).
3. Attach the new showerhead to the shower arm by turning clockwise. Tighten
with a wrench (Fig 3 & 4).
the
the
1. Remove the showerhead from the shower arm by unscrewing the ball
joint counter-clockwise (Fig 1).
4. Remove any debris from the filter screen and from the flow controller.
Reinstall the flow controller by pressing into the opening of the showerhead.
Reinstall the filter screen by screwing clockwise into the ball joint threads.
Reattach the showerhead by screwing the ball joint clockwise into the shower
arm threads. Make sure to follow the original installation instructions shown
above.
2. The filter screen and flow controller are located at the opening of the
showerhead ball joint (Fig 2). Unscrew the filter screen from the ball
joint.
If necessary, use your needle-nose pliers (Fig 3).
3. Use needle-nose pliers to grasp the flow controller and pull the flow
controller out.
Take care not to use excessive force when grasping the
flow controller so as to avoid damage (Fig 4).
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Danze D451279 Guide d'installation

Taper
Guide d'installation

dans d''autres langues