Hampton Bay JIB8411A/BN Mode d'emploi

Taper
Mode d'emploi

Ce manuel convient également à

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this sconce. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available
for your home improvement needs. Thank you for choosing Hampton Bay!
Item #1002 513 560
Model #JIB8411A/BN
Item #1002 513 569
Model #JIB8411A/ORB
Item # 000-000
Model # XXXXXXX
USE AND CARE GUIDE
1-LIGHT INTERIOR SCONCE
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
2
Table of Contents
Table of Contents ................................. 2
Safety Information ................................ 2
Warranty ............................................... 2
What is Covered ........................................... 2
What is Not Covered .................................... 2
Pre-Installation ..................................... 3
Planning Installation .................................... 3
Tools Required ............................................ 3
Hardware Included ...................................... 3
Package Contents ....................................... 4
Installation ........................................... 5
Care and Cleaning ............................... 7
Troubleshooting .................................. 7
Safety Information
WARNING: Carefully read and understand the
information given in this manual before beginning the
assembly and installation. Failure to do so could lead to
electric shock, fire or other injuries which could be
hazardous or even fatal.
WARNING: Be sure the electricity to the wires you are
working on is shut off. Either remove the fuse or turn the
circuit off.
NOTICE: Changes or modifications not expressly approved by the
party responsible for compliance could void the users authority to
operate the equipment.
Warranty
WHAT IS COVERED
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of five (5)
years from date of purchase. This warranty applies only to the original consumer and only to products used in normal use
and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the
repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged
through misuse, abuse, accident, modifications, alterations, neglect or mishandling.
WHAT IS NOT COVERED
This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in
accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a
result of an accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to faulty
material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or
weathering, as this is considered normal wear and tear.
The manufacturer does not warrant and specially disclaims any warranty, whether express or implied, of fitness for a
particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall
not be liable for any consequential or incidental loss or damage, including but not limited to any labor / expense costs
involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit Hamptonbay.com.
3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Installation
PLANNING INSTALLATION
Read all instructions before assembly. Before starting installation of this fixture or removal of a previous fixture, disconnect
the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product,
assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: Keep your receipt and these instructions for proof of
purchase.
NOTE: This fixture can be installed as an up-light or a down-light.
TOOLS REQUIRED
Wire
Strippers
Safety
Goggles
Ladder
Gloves
Flathead
Screwdriver
Phillips
Screwdriver
Electrical
Tape
Wire Cutters
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part
Description
Quantity
AA
Cross Bar
1
BB
Ground Screw
1
CC
Outlet Box Screw (15 mm)
2
DD
Mounting Screw (22 mm)
2
EE
Wire Connector
3
4
Pre-Installation (continued)
PACKAGE CONTENTS
Part
Description
Quantity
A
Socket Ring
1
B
Globe
1
C
Socket
1
D
Lock Nut
2
E
Wall Plate
1
5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation
1
Attaching the cross bar to the
outlet box
2
Connecting the electrical wires
Screw the mounting screws (DD) into the cross bar (AA).
Mount the cross bar (AA) to the outlet box (not
included) using the outlet box screws (CC).
Make sure the threads of the mounting screws (DD)
are facing out when the cross bar (AA) is attached to
the outlet box.
Wrap the ground wire from the fixture around the
ground screw (BB) on the cross bar (AA). Use a
wire connector (EE) to connect the ground wire
from the fixture to the ground wire from the outlet
box.
Use a wire connector (EE) to connect the white
wire from the fixture to the white wire (neutral
wire) from the outlet box.
Use a wire connector (EE) to connect the black
wire from the fixture to the black wire (live wire)
from the outlet box.
Wrap the three wire connections with electrical
tape for a more secure connection.
Position the wires back inside the outlet box.
6
Installation (continued)
3
Attaching the fixture to the outlet
box
4
Attaching the globe
Align the mounting screws (DD) so they protrude
through the appropriate holes on the wall plate (E).
Screw the lock nuts (D) onto the mounting screws (DD).
NOTE: This fixture can be installed as an up-light or a down-
light.
Place the globe (B) over the socket (C).
Screw the socket ring (A) onto the socket (C) to
secure the globe (B).
5
Installing a bulb
Screw a bulb 60 watts maximum medium-base
incandescent bulb (sold separately) into the socket (C).
NOTE: You can use a LED equivalent energy-saving bulb that
does not exceed 8 Watts (sold separately).
7 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Care and Cleaning
Clean the fixture with a soft, dry cloth.
Do not use any cleaners with chemicals, solvents or hash abrasives.
CAUTION: Before attempting to clean the fixture,
disconnect the power to the fixture by turning the breaker off
or removing the fuse from the fuse box.
Troubleshooting
Problem
Possible Cause
Solution
The bulb will not light.
The bulb is burned out.
Replace the light bulb.
The power is off.
Ensure the power supply is On.
The circuit breaker is off.
Ensure the circuit breaker is in the On position.
The fuse blows or circuit
breaker trips when the light
is turned on.
The wires are crossed or the
power wire is grounding out.
Check the wire connections.
Contact a qualified electrician or call the
Customer Service Team at
1-855-HD-HAMPTON.
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
GRACIAS POR TU COMPRA
Agradecemos la confianza que ha tenido en Hampton Bay a traves de de la compra de este aplique. Nos esforzamos para
continuamente crear productos de calidad diseñados para mejorar tu hogar. Visítanos por Internet para ver nuestra línea
completa de productos disponibles para las necesidades de mejoras de tu hogar. Gracias por elegir Hampton Bay!
Artículo #1002 513 560
Modelo #JIB8411A/BN
Artículo #1002 513 569
Modelo #JIB8411A/ORB
Item # 000-000
Model # XXXXXXX
GUÍA DE USO Y MANTENIMIENTO
APLIQUE DE PARED PARA INTERIORES DE 1-LUZ
Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama
al Servicio al Cliente de Hampton Bay
de Lunes a Viernes entre 8 a.m. y 7 p.m., El Sábado entre 9 a.m. y 6 p.m., (hora del Este de EE. UU.)
1-855-HD-HAMPTON
HAMPTONBAY.COM
10
Índice
Índice .................................................. 10
Información de Seguridad ................. 10
Garantía .............................................. 10
Lo que esta Cubierto .................................. 10
Lo que (no) esta Cubierto ........................... 10
Pre-Instalación ................................... 11
Planificación de la Instalatión .................... 11
Herraminentas Necesarias ......................... 11
Requiere de Hardware ............................... 11
Contenido del Paquete .............................. 12
Instalación ..........................................13
Mantenimiento y Limpieza .................15
Solución de Problemas ......................15
Información de Seguridad
ADVERTENCIA: Lea cuidadosamente y entienda la
información dada en este manual antes de empezar el
proceso de ensamble e instalación. Si falla en hacerlo,
puede ocasionar un choque eléctrico, incendio u otros
daños que pueden ser perjudiciales o fatales.
ADVERTENCIA: Asegúrese de que la electricidad que
llega a los cables con los que se encuentra trabajando estén
apagados. Remueva el fusible o apague el interruptor.
ANUNCIO: Cualquier cambio o modificación que no se encuentre
expresamente aprobada por el proveedor responsable del cumplimiento
puede revocar la autorización del usuario a utilizar el equipo.
Garantía
LO QUE ESTA CUBIERTO
El fabricante garantiza que esta lámpara no presentará defectos materiales o de fabricación por un período de cinco (5)
años a partir de la fecha de compra. Esta garantía es válida sólo para el comprador original y sólo cubre los productos en
uso y funciones normales. Si se descubre algún defecto en este producto, la única obligación y solución exclusiva del
fabricante, a criterio del mismo, será reparar o reemplazar el producto siempre y cuando el defecto no sea resultado de un
mal uso, abuso, accidente, modificaciones, alteraciones, negligencia o manejo indebido.
LO QUE (NO) ESTA CUBIERTO
Esta garantía no cubre ningún producto instalado, configurado o usado incorrectamente sin seguir las instrucciones
adjuntas al producto. Esta garantía no cubre fallas del producto a consecuencia de un accidente, mal uso, abuso,
negligencia, modificaciones o instalaciones defectuosas, o cualquier otra falla no relacionada con defectos materiales o de
fabricación. Esta garantía no se aplica al acabado de ninguna parte del producto, como por ejemplo el de la superficie, ni al
deterioro por condiciones ambientales, ya que eso se considera un desgaste normal.
El fabricante no garantiza y rechaza especialmente cualquier garantía, expresa o implícita, de idoneidad para un propósito
en particular, distinta de la garantía indicada aquí. El fabricante se exime específicamente de cualquier obligación y no es
responsable por daños o pérdidas directas o indirectas, lo que incluye cualquier costo de mano de obra o gastos
relacionados con el reemplazo o reparación de dicho producto.
Comunícate con el Equipo de Servicio al Cliente al 1-855-HD-HAMPTON o visita Hamptonbay.com.
11 HAMPTONBAY.COM
Para obtener asistencia, llama al 1-855-HD-HAMPTON.
PLANIFICACIÓN DE LA INSTALLATIÓN
Lee todas las instrucciones antes de ensamblar. Antes de comenzar la instalación o de quitar la instalación anterior,
desconecte la alimentacion apagando el interruptor del circuito o quitando el fusible en la caja de fusible. Para evitar dañar
el artículo, ensámblalo sobre una superficie suave, no abrasiva, como por ejemplo una alfombra o cartón.
NOTA: Conserva el recibo y estas Instrucciones como
Comprobante de Compra.
NOTA: Este accesorio puede ser instalado como una luz hacia
arriba o hacia abajo.
HERRAMIENTAS NECESARIAS
Peladores
de Cables
Gafas de
Seguridad
Escalera
Guantes
Destornillador
de Cabeza Plana
Destornillador
Phillips
Cinta
Aislan
Pinzas
Cortacables
REQUIERE DE HARDWARE
NOTA: El objeto no se muestra en su tamaño real.
Pre-Instalación
Pieza
Descripción
Cantidad
AA
Barra Cruzada
1
BB
Tornillo de Toma de Tierra
1
CC
Tornillo de la Caja de Salida (15 mm)
2
DD
Tornillos de Montaje (22 mm)
2
EE
Conector de Cable
3
12
Pre-Instalación (continuación)
CONTENIDO DEL PAQUETE
Pieza
Descripción
Cantidad
A
Aro del Portalámpara
1
B
Pantalla
1
C
Portalámpara
1
D
Tuerca de Cierre
2
E
Placa de la Pared
1
13 HAMPTONBAY.COM
Para obtener asistencia, llama al 1-855-HD-HAMPTON.
Instalación
1
Acoplar la barra cruzada a la caja
de salida
2
Conectar los cables eléctricos
Atornille los tornillos de montaje (DD) en la barra
cruzada (AA).
Monte la barra cruzada (AA) a la caja de salida (no
incluida) usando los tornillos de la caja de salida
(CC).
Asegure que las roscas de los tornillos de montaje
(DD) quedan hacia afuera cuando la barra cruzada
(AA) es colocada en el caja de salida.
Envuelva el cable de toma de tierra de la
instalación alrrededor del tornillo de toma de
tierra (BB) que hay en la barra cruzada (AA). Use
un cable conector (EE) conectar el cable de toma
de tierra de la instalación al cable de toma de
tierra de la caja de salida.
Use un cable conector (EE) para conectar cable
blanco de la instalación con el cable blanco
(cable néutro) de la caja de salida.
Use un cable conector (EE) para conectar
conecte el cable negro de la instalación con el
cable negro (cable vivo) de la caja de salida.
Envuelva las tres conexiones de cables con cinta
aislante para una conexión más segura.
Posicione los cables de vuelta al interior de la
caja de salida.
14
Instalación (continuación)
3
Asegurar el accesorio a la caja de
salida
4
Fijar la pantalla
Alinee los tornillos de montaje (DD) de modo que
sobresalgan de los agujeros apropiados de la cubierta
para placa de la pared (E).
Atornille las tuercas de cierre (D) en los tornillos de
montaje (DD).
NOTA: Este accesorio puede ser instalado como una luz
hacia arriba o hacia abajo.
Coloque la pantalla (B) sobre la portalámpara
(C).
Atornille el aro del portalámpara (A) en la
portalámpara (C) para asegurar la pantalla (B).
5
Instalar la bombilla
Atornille la bombilla (en venta por separado) (no exceda
los 60 vatios) en la portalámpara (C).
NOTA: Puedes usar los bombillas de ahorro de energía a LED
que no exceda los 8 Vatios (en venta por separado).
15 HAMPTONBAY.COM
Para obtener asistencia, llama al 1-855-HD-HAMPTON.
Mantenimiento y Limpieza
Limpia la lámpara con un paño suave y seco.
No uses limpiadores con químicos, solvents, o productos abrasivos.
PRECAUCIÓN: Antes de intentar limpiar la pieza,
desconéctela o apague el interruptor o remueva el fusible de
la caja de fusibles.
Solución de Problemas
Problema
Causa Posible
Solución
La bombilla no enciende.
La bombilla está fundida.
Reemplaza la bombilla.
La electricidad está
apagada.
Asegúrate de que el suministro de electricidad
esté encendido.
El cortacircuito está
apagado.
Verifica que el cortacircuitos está en la posición
de “on” (encendido).
El fusible se funde o el
cortacircuito se activa cuando se
enciende la luz.
Los cables están cruzados o
el cable de poder tiene polo
a tierra.
Compruebe las conexiones del cableado.
Contacta a un electricista calificado o
llama al equipo de Servicio al Cliente al
1-855-HD-HAMPTON.
Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama
al Servicio al Cliente de Hampton Bay
de Lunes a Viernes entre 8 a.m. y 7 p.m., El Sábado entre 9 a.m. y 6 p.m., (hora del Este de EE. UU.)
1-855-HD-HAMPTON
HAMPTONBAY.COM
Conserva este manual para referencias futuras.
MERCI
Nous vous remercions de la confiance que vous avez place en Hampton Bay en achetant ce applique. Nous nous efforçons
en permanence de créer des produits de qualité conçus pour perfectionner votre maison. Vous pouvez visiter notre site en
ligne pour consulter notre gamme complète de produits pour vos besoins de rénovation résidentielle. Merci d'avoir choisi
Hampton Bay!
Article #1002 513 560
Modèle # JIB8411A/BN
Article #1002 513 560
Modèle # JIB8411A/ORB
Item # 000-000
Model # XXXXXXX
GUIDE D'UTILISATION ET D'ENTRETIEN
1-APPLIQUE D’INTERIEUR
Questions, problèmes, pièces manquantes? Avant de retourner au magasin, veuillez communiquez avec le
service à la clientèle Hampton Bay
Du lundi au vendredi : 8h 19h, HNE; le samedi : 9h - 18h, HNE
1-855-HD-HAMPTON
HAMPTONBAY.COM
18
Table des Matières
Table des Matières ............................. 18
Consignes de Sécurité ....................... 18
Garantie .............................................. 18
Ce qui est Cuvert ....................................... 18
Ce qui est Cuvert (et Pas) ........................... 18
Pré-Installation ................................... 19
Planification de l’installation ..................... 19
Outils Requis ............................................. 19
Materiel Requis ......................................... 19
Contenu de l'Emballag .............................. 20
Installation ..........................................21
Entretien et Nettoyage........................23
Dépannage ..........................................23
Consignes de Sécurité
AVERTISSEMENT: Veuillez soigneusement lire et
comprendre les informations contenues dans ce manuel
avant de commencer l’assemblage et l’installation. Vous
vous exposez, dans le cas contraire, à des risques
dangereux ou mortels d’électrocution, d’incendie ou
d’autres blessures.
AVERTISSEMENT: Be Enlevez les fusibles concernés
ou désactivez le disjoncteur afin de vous assurer de mettre
hors tension les fils électriques à manipuler.
REMARQUE: Tout changement ou modification non expressément
approuvé par le parti responsable de la conformité peut annuler le droit
par l’utilisateur d’utiliser le matériel.
Garantie
CE QUI EST COUVERT
Le fabricant garantit que ce luminaire sera exempt de défauts de fabrication et de matériaux pendant une période d'un cinq
(5) ans à compter de la date d’achat. Cette garantie ne vise que l’acheteur original et uniquement un usage et un entretien
normaux des produits. Si ce produit est défectueux, la seule obligation du fabricant, et votre seul recours, est de remplacer
ou de réparer le produit, au choix du fabricant, pourvu que le produit n’ait pas été endommagé par une utilisation
inadéquate ou abusive, par un accident, une modification, une altération, la négligence ou une mauvaise manipulation.
CE QUI EST COUVERT (ET PAS)
Cette garantie ne s’applique pas à un produit qui est déclaré avoir été mal installé, mal posé ou utilisé d’une façon non
conforme aux instructions qui l’accompagnent. Cette garantie ne s’applique pas à un défaut du produit qui découle d’un
accident, d’un mauvais usage, d’un usage abusif, d’une négligence, d’une modification ou d’une installation incorrecte, ou
à tout défaut étranger à un défaut de matériaux ou de fabrication. Cette garantie ne s’applique pas au fini de toute partie du
produit, comme la surface, ni à l’altération par le climat, puisqu’il s’agit d’une usure normale.
Le fabricant ne garantit aucunement, et réfute expressément toute garantie, explicite ou tacite, d’adaptation à un usage
particulier autre que celui exprimé aux présentes. Le fabricant réfute expressément toute responsabilité et ne peut être tenu
responsable de toute perte ou de tout dommage indirect ou accessoire, y compris mais non de façon limitative, tous les
frais de main-d’œuvre ou autres encourus pour le remplacement ou la réparation dudit produit.
Communiquez avec l’équipe du service à la clientèle au 1-855-HD-HAMPTON ou visitez le site HomeDepot.com.
19 HAMPTONBAY.COM
Veuillez composer le 1-855-HD-HAMPTON pour une assistance supplémentaire.
Pré-Installation
PLANIFICATION DE L'INSTALLATION
Lisez toutes les instructions avant de procéder à l’assemblage. Avant de commencer à installer ce luminaire ou d’enlever
l’ancien luminaire, déconnectez le courant en eteignant le disjoncteur ou en enlevant le fusible correspondent du coffret à
fusibles. Pour éviter d’endommager ce produit, assemblez-le sur une surface molle et non abrasive telle qu’un tapis ou un
carton.
REMARQUE: Conservez le reçu, ainsi que ces instructions, à
titre de preuve d’achat.
REMARQUE: Ce luminaire peut être installé avec les lampes
vers le haut ou vers le bas.
OUTILS REQUIS
Dénudeur
de Câbles
Électriques
Lunettes de
Protection
Echelle
Gants
Tournevis à
Tête Plate
Tournevis à
Croisillon
Ruban
Adhésif
Isolant
Pince Pour
Câbles
Électriques
MATERIEL REQUIS
REMARQUE: Le matériel n’est pas illustré à sa taille réelle.
Pièce
Description
Quantité
AA
Entretoise
1
BB
Vis de Terre
1
CC
Vis de Boîte de Sortie (15 mm)
2
DD
Vis de Montage (22 mm)
2
EE
Serre-fil
3
20
Pré-Installation (suite)
CONTENU DE L'EMBALLAG
Pièce
Description
Quantité
A
Anneau de Douille
1
B
Abat-jour
1
C
Douille
1
D
Écrou de Verrouillage
2
E
Plaque Murale
1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Hampton Bay JIB8411A/BN Mode d'emploi

Taper
Mode d'emploi
Ce manuel convient également à