Extremis Bistroo Manuel utilisateur

MANUAL

LAB142

Assembly instructions, how to use, useful tips for keeping

your tool for togetherness in shape.

EN – NL – DE – FR – IT – ES

Bistroo

Tools for togetherness

IMPORTANT! RETAIN FOR FUTURE

REFERENCE: READ CAREFULLY.

BELANGRIJK! LEES DIT DOCUMENT

AANDACHTIG EN BEWAAR HET VOOR

TOEKOMSTIGE RAADPLEGING!

WICHTIG! AUFHEBEN, UM SPÄTER

ETWAS NACHSEHEN ZU KÖNNEN:

SORGFÄLTIG DURCHLESEN!

IMPORTANT! LISEZ ATTENTIVEMENT

CE MANUEL ET CONSERVEZ-LE POUR

RÉFÉRENCE ULTÉRIEURE!

IMPORTANTE! CONSERVARE COME

RIFERIMENTO PER IL FUTURO:

LEGGERE ATTENTAMENTE!

¡IMPORTANTE! CONSÉRVELO PARA

FUTURA REFERENCIA: LÉALO

ATENTAMENTE!

Do not use

power tools!

Table of contents

Mounting kit

6

Exploded view

8

Assembly Bistroo with purse hanger & stacking spacer

10

Assembly table tray

15

Assembly extended tabletop

15

Assembly cushion

16

Assembly floor fastening

17

Warnings – Assembly text instructions – Maintenance

20

Parts list

32

6

Mounting kit

x 4

x 4x 4

scale 1:1

M6x10 din 7984

M8x20 din 7984

M8x30 din 7984

BIS345

BIS344

BIS346

2x

VRS703

BIS347

Mounting kit to ﬁx tabletop

to centre leg

Mounting kit to

ﬁx centre leg

support to

centre leg

Mounting kit to ﬁx legs & back

support to centre leg support

x 4

M6 din 137b

x 4

x 6

x 4

x 6

scale 1:1 scale 1:1

M6 din 137b

M6x12 din 7984

Mounting kit to ﬁx seat

to leg

Mounting kit to ﬁx backrest

to back support

M8 din 985

7

Floor fastening (optional)

x 3

x 3 x 3

x 3

scale 1:1

M8x50 iso 4017

Mounting kit to ﬁx ﬂoor fastening to legs

BIS024

8

1

8

3

6

5

2

4

7

Exploded view

9

2.

10

N° 13

N° 4 - 5

35’

scale 1:2scale 1:2

BIS345

BIS344

p 14

1. Use a blanket as protection

Assembly Bistroo

x 4 x 4

x 4

M6 M6x10

M8x20

1

3

2

3b.

11

3a.

On the

outside

Insert

bolts

scale 1:2

BIS347

x 4x 4

M8x30M8

4

12

4b.

4a.

6

5

1. Insert

all nuts

2. Tighten

both sides

scale 1:2

BIS347

x 4x 4

M8x30M8

13

x 4

5.

x 8 x 8

scale 1:2

M6 M6x12

VRS703

1

2

3

8 Nm

4kg/8,8lb

MAX!

4

8 Nm

7

14

6.

x 6 x 6

scale 1:2

M6 M6x12

BIS346

8

8 Nm

4kg/8,8lb

MAX!

15

Assembly table tray

1.

Assembly extended tabletop

1.

16

Assembly cushion

1.

17

2a.

N° 34

10’

Assembly floor fastening

1.

p 15

2b.

18

4.

3.

x 3

19

6.

5.

20

English

WARNINGS

General

• Do not use any sharp tools to open the packaging.

• We strongly advise against using power tools.

• Tripping hazard, mind your step.

• Do not put out cigarettes on the table.

• Not graﬁtti proof.

• Do not leave children unattended whilst playing on

the chair.

• Colours can dier over years and from batch to

batch.

Product

• Do not disassemble the seats unless they need to

be replaced.

• Anchoring the product has to be done by qualiﬁed

people.

• For anchoring: use suitable bolts or screws from a

specialized store depending on the material your

terrace is made of.

• Stackable up to 4 pieces.

• Always stack the tables with 2 people.

• Only use Extremis accessories.

• Do not sit on the tabletop.

• Do not stand or jump on the seat or the tabletop.

• Max. 1 person or 120 kg per seat.

Powder-coating

• White powder-coating requires more

maintenance.

• Do not use abrasive scouring powders or scourers

as they will scratch the surface.

• Colour can fade to some extent when exposed to

UV.

• Flame retarding - NEN-EN13501-1 A2-sl -

Satisfying the same criteria as Class B for the

SBI-test according to EN13823. In addition, under

conditions of a fully developed ﬁre these products

will nog signiﬁcantly contribute to the ﬁre load

and ﬁre growth.

• Dark colors can get very hot in sunny weather.

Felt

• Stains should be removed immediately with a

clean, soft cloth, particularly in case of dark-

coloured liquids such as wine, ink, coee coke,

oild and bird droppings. If left to dry, these liquids

may cause permanent damage!

• Do not bleach to clean.

ASSEMBLY INSTRUCTIONS

Bistroo - p10

1. Lay the tabletop upside down on the ground with

the holes facing upwards and use a blanket for

protection. Position the centre leg on the tabletop

so that the holes align and attach it with 4 M6

wave washers and 4 M6x10 bolts. Caution: make

sure that the cut-out of the centre leg is on the

same side as the cut-out of the tabletop.

2. Position the logo frame in the central leg as shown

in the drawing, with the rubber stacking caps

facing upwards and fasten with 4 M8x20 bolts.

3. a. Next, position the backrest on the logo frame.

b. NoInsert the M8x30 bolts through the holes of

the logo frame and the backrest so that it stays in

position. Do not use any nuts yet.

4. a. Now slide the left and right leg over the bolts, as

shown in the drawing.

b. Fasten them with 2 M8 nuts each.

5. Attach the seats to the legs, each with 4 M6x12

bolts and 4 M6 wave washers as shown in the

drawing. Caution: Tighten the bolts diagonally as

shown in the drawing, but not too hard! Max. 8Nm

or 4 kg / 8,8 lb.

6. Turn the table over so that it is standing on 3 legs.

Attach the 2 backrests to the back support using 3

M6 wave washers and 3 M6 bolts.

Table tray - p15

1. Position the table tray in the cut-out of the

tabletop.

Extended tabletop - p15

1. Position the extended tabletop in the cut-out of the

tabletop as shown in the drawing.

Cushion - p16

1. Position the cushion on the seat so that the

silicone plug of the cushion ﬁts into the hole of

the seat.

Floor fastening - p17

1. Turn the table upside down.

2. a. Drill a hole in the plastic cap.

b. Now pull the plastic cap out using a screwdriver

as shown in the drawing.

3. Assemble the ground anchoring set as shown in

the drawing. Do not completely tighten the bolt

Warnings – Assembly text instructions – Maintenance

La page charge ...

Extremis Bistroo Manuel utilisateur

Extremis Bistroo Manuel utilisateur

dans d''autres langues