Samsung LE32B350F1W Manuel utilisateur

TELEVISEUR LCD

manuel d’utilisation

Imaginez les possibilités

Merci d'avoir acheté un produit Samsung. Pour

bénéﬁcier d'un service encore plus complet,

enregistrez votre produit à l'adresse

www.samsung.com/register

Modèle N° de série

BN68-02394A-00

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service

Consommateurs Samsung.

Pays

Service client

Site Web

SOUTH AFRICA 0860-SAMSUNG(726-7864 ) www.samsung.com/za

U.A.E 800-SAMSUNG (726-7864)

8000-4726

www.samsung.com/ae

[350_Tunisia]BN68-02394A-00L02.i1 1 2009-07-03 ¿ÀÀü 9:24:39

Digital TV Notice

1. Functionalities related to Digital TV(DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital

terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C(MPEG2 and MPEG4 AAC) cable-

TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal.

2.

DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-

C is that for the broadcast transmission of digital TV over cable. However, some differentiated features like EPG (Electric

Programme Guide), VOD (Video on Demand) and so on, are not included in this specification. So, they cannot be workable at

this moment.

3.

Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T

digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed.

4.

Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a

service and you may be required to agree to terms and conditions of their business.

5.

Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some

cable service providers.

6.

For more information, please contact your local Samsung customer care centre.

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen

Do not display a still image and partially still on the LCD panel for more than 2 hours as it can cause screen image retention.

This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and

contrast of the screen when displaying a still image.

Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the

left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or

a game console may cause a similar effect to the screen. Damages caused by the above effect are not

covered by the Warranty.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To

prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

❑

●

[350_Tunisia]BN68-02394A-00L02.i1 1 2009-07-03 ¿ÀÀü 9:24:39

English - 1

GENERAL INFORMATION

Viewing the Control Panel ................................................................. 2

Accessories ....................................................................................... 3

Viewing the Connection Panel ........................................................... 4

Remote Control ................................................................................. 6

Installing Batteries in the Remote Control ......................................... 6

OPERATION

Viewing the menus ............................................................................ 7

Placing Your Television in Standby Mode .......................................... 8

Plug & Play Feature ........................................................................... 8

Viewing the Display ........................................................................... 9

CHANNEL CONTROL

Conguring the Channel Menu .......................................................... 9

Managing Channels .........................................................................11

PICTURE CONTROL

Conguring the Picture Menu .......................................................... 13

Using Your TV as a Computer (PC) Display .................................... 15

Setting up the TV with your PC........................................................ 16

■

SOUND CONTROL

Conguring the Sound Menu ........................................................... 17

Selecting the Sound Mode .............................................................. 18

SETUP

Conguring the Setup Menu ............................................................ 19

INPUT / SUPPORT

Conguring the Input Menu ............................................................. 22

Conguring the Support Menu ......................................................... 22

RECOMMENDATIONS FOR USE

Teletext Feature ............................................................................... 24

Installing the Stand .......................................................................... 25

Installing the Wall Mount Kit ............................................................ 25

Using the Anti-Theft Kensington Lock ............................................. 25

Securing the Installation Space ....................................................... 26

Securing the TV to the Wall ............................................................. 26

Troubleshooting: Before Contacting Service Personnel .................. 27

Specications .................................................................................. 27

■

CONTENTS

License

TruSurround HD, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is

incorporated under license from SRS Labs, Inc.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of

Dolby Laboratories.

Symbol

N O T

Note One-Touch Button TOOLS Button Press

❑

English

[350_Tunisia]BN68-02394A-00L02.i1 1 2009-07-03 ¿ÀÀü 9:24:39

English - 2

GENERAL INFORMATION

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

Product design and specications may be changed without notice in order to enhance product performance.

Viewing the Control Panel

The product colour and shape may vary depending on the model.

The front panel buttons can be activated by touching them with your nger.

1

SOURCE

E

: Toggles between all the available input sources. In the on-screen menu, use this button as you would use the

ENTER

E

button on the remote control.

2

MENU: Press to see an on-screen menu of your TV’s features.

3

Y

: Press to increase or decrease the volume.

In the on-screen menu, use the

Y

buttons as you would use the ◄ and ► buttons on the remote control.

4

z

: Press to change channels. In the on-screen menu, use the

z

buttons as you would use the ▼ and ▲

buttons on the remote control.

5

POWER INDICATOR: Blinks and turns off when the power is on and lights up in stand-by mode.

6

P

POWER: Press to turn the TV on and off.

7

REMOTE CONTROL SENSOR: Aim the remote control towards this spot on the TV.

8

SPEAKERS

N

¦

N

88

4

1

2

3

5

6

7

POWER

[350_Tunisia]BN68-02394A-00L02.i2 2 2009-07-03 ¿ÀÀü 9:24:40

English - 3

Accessories

Remote Control & Batteries (AAA x 2) Power Cord Cover-Bottom

(M4 X L16)

Stand Screw X 6 Cleaning Cloth

Owner’s Instructions

●

Warranty card

●

Safety Guide

●

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

Warranty card / Safety Guide (Not available in all locations)

The items colour and shape may vary depending on the model.

¦

N

[350_Tunisia]BN68-02394A-00L02.i3 3 2009-07-03 ¿ÀÀü 9:24:41

English - 4

Viewing the Connection Panel

The product colour and shape may vary depending on the model.

Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

When connecting an external device, match the colour of the connection terminal to the cable.

1

ANT IN

Connects to an antenna or cable TV system.

2

HDMI IN 1(DVI), 2

Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD / Blu-ray player)

No additional Audio connection is needed for an HDMI to HDMI connection.

The HDMI IN 1(DVI) jack can be used to connect a PC.

What is HDMI?

‘High Denition Multimedia interface’ allows the transmission of high denition digital video data and multiple channels of

digital audio.

The HDMI / DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).

The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital

Copy Protection) coding feature installed, and supports multi - channel digital audio.

3

PC / DVI AUDIO IN

Connect to the audio output jack on your PC.

DVI audio outputs for external devices.

4

PC IN

Connect to the video output jack on your PC.

5

DIGITAL AUDIO OUT (OPTICAL)

Connects to a Digital Audio component such as a Home theatre receiver.

When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV outputs 2 channel audio

only. If you want to hear 5.1 channel audio, connect the Optical jack on the DVD / Blu-ray player or Cable / Satellite Box

directly to an Amplier or Home Theatre, not the TV.

¦

N

–

N

–

N

[TV Rear Panel]

9

7

1 2 3 4 5 6

8

Power Input

[TV Side Panel]

[350_Tunisia]BN68-02394A-00L02.i4 4 2009-07-03 ¿ÀÀü 9:24:41

English - 5

6

EXT

Connector

Input Output

Video Audio (L / R) RGB Video + Audio (L / R)

EXT O O O Only TV or DTV output is available.

Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

7

COMMON INTERFACE Slot

When not inserting ‘CI CARD’ in some channels, ‘Scrambled Signal’ is displayed on the screen.

The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in

about 2~3 minutes. If an error message is displayed, please contact your service provider.

When the channel information conguration has nished, the message ‘Updating Completed’

is displayed, indicating that

the channel list is now updated.

You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your

hands since dropping the CI CARD may cause damage to it.

Insert the CI-Card in the direction marked on it.

The place of the COMMON INTERFACE Slot may be different depending on its model.

CAM is not supported in some countries and regions, check with your authorized dealer.

8

COMPONENT IN / AV IN

Connect component video cables (optional) to component connector (P

R, PB, Y) on the rear of your set and the other ends

to corresponding component video out connectors on the DTV or DVD.

If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD)

and connect the DTV (or DVD) to component connector (P

R, PB, Y) on your set.

The P

R, PB and Y connectors on your component devices (DTV or DVD) are sometimes labelled Y, B-Y and R-Y or Y, Cb

and Cr.

Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio

out connectors on the DTV or DVD.

The COMPONENT IN jack is also used as the AV IN jack.

Connect the video cable to the COMPONENT IN [Y/VIDEO] jack and the audio cable to the COMPONENT IN [R-

AUDIO-L] jacks.

9

KENSINGTON LOCK (depending on the model)

The Kensington Lock (optional) is a device used to physically x the system when used in a public place. If you want to

use a locking device, contact the dealer where you purchased the TV.

The location of the Kensington Lock may be different depending on its model.

–

N

–

N

–

N

[350_Tunisia]BN68-02394A-00L02.i5 5 2009-07-03 ¿ÀÀü 9:24:41

English - 6

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV.

The performance of the remote control may be affected by bright light.

The product colour and shape may vary depending on the model.

1

POWER : Television Standby

button.

2

NUMERIC BUTTONS : Press to

change the channel.

3

FAV.CH: Used to display

Favourites Channel Lists on the

screen.

4

Y

: Press to increase or

decrease the volume.

5

SOURCE: Press to display

and select the available video

sources.

6

INFO: Press to display

information on the TV screen.

7

TOOLS: Use to quickly select

frequently used functions.

8

CH LIST: Displays the Channel

List on screen

9

COLOURS BUTTONS: Use

these buttons in the Channel list

menus etc.

!

TV: Selects the TV mode directly.

@

PRE-CH: Enables you to return

to the previous channel you were

watching.

#

MUTE

M

: Press to temporarily

cut off the sound.

$

P

<

/P

>

: Press to change

channels.

%

MENU: Displays the main on-

screen menu

^

GUIDE: Electronic Programme

Guide (EPG) display

&

RETURN: Returns to the

previous menu

*

 UP▲/DOWN▼/LEFT◄/

RIGHT►/ENTER

E

: Use to

select on-screen menu items and

change menu values.

(

EXIT: Press to exit the menu.

)

SUBT.: Digital subtitle display

a

AD: Audio Description selection.

Teletext Functions

5

0

: Teletext mode selection

(LIST / FLOF)

6

5

: Teletext reveal

7

4

: Teletext size selection

8

: Teletext store

9

Fastext topic selection

0

/

: Alternately select

Teletext, Double, or Mix.

!

:

: Exit from the teletext display

@

1

: Teletext sub page

$

2

: Teletext next page

3

: Teletext previous page

%

6

: Teletext index

&

9

: Teletext hold

(

7

: Teletext cancel

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the gure.

2. Install two AAA size batteries.

Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside the

compartment.

3.

Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the

remote control for a long time.

If the remote control doesn’t work, check the following:

Is the TV power on?

Are the plus and minus ends of the batteries reversed?

Are the batteries drained?

Is there a power outage or is the power cord unplugged?

Is there a special uorescent light or neon sign nearby?

¦

N

¦

N

–

1

2

3

4

5

6

7

8

9

0

!

@

#

$

&

*

(

)

a

%

^

[350_Tunisia]BN68-02394A-00L02.i6 6 2009-07-03 ¿ÀÀü 9:24:42

English - 7

OPERATION

Viewing the menus

Before using the TV, follow the steps below to learn how to navigate the menu in order to select

and adjust different functions.

1. Press the MENU button.

The main menu is displayed on the screen. Its left side has icons: Picture, Sound,

Channel , Setup, Input, Support.

2.

Press the ▲ or ▼ button to select one of the icons.

Press the ◄ or ► button to access the icon’s sub-menu.

3.

Press the ▲ or ▼ button to move to items in the menu.

Press the ENTER

E

button to enter items in the menu.

4. Press the ▲/▼/◄/► button to change the selected items.

Press the RETURN button to return to the previous menu.

5.

Press the EXIT button to exit from the menu.

Using the remote control buttons

Button Operations Button Operations

MENU

Display the main on-screen menu.

▲/▼/◄/►/

ENTER

E

Move the cursor and select an item.

Select the currently selected item.

Conrm the setting.

RETURN

R

Return to the previous menu.

EXIT

e

Exit the on-screen menu.

Example: Setting the TV’s Brightness in the Picture Menu

Adjusting the Brightness to 80

1.

Press the MENU button to display the menu.

2.

Press the ENTER

E

button to select Picture.

3. Press the ▲ or ▼ button to select Brightness.

4.

Press the ENTER

E

button.

5. Press the ◄ or ► button until the brightness becomes 80.

6.

Press the ENTER

E

button.

Press the EXIT button to exit from the menu.

¦

N



N

Mode :Standard ►

Backlight : 8

Contrast : 95

Brightness : 45

Sharpness : 50

Colour : 50

Tint (G / R) : G50 / R50

Picture

Mode :Standard ►

Backlight : 8

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Picture

Backlight : 8

Contrast : 95

Brightness :45  ►

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Advanced Settings

Picture Options

Picture Reset

Picture

Mode : Standard

Backlight : 8

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Picture

Brightness 45

U

Move

L

Adjust

E

Enter

R

Return

Brightness 80

U

Move

L

Adjust

E

Enter

R

Return

[350_Tunisia]BN68-02394A-00L02.i7 7 2009-07-03 ¿ÀÀü 9:24:42

English - 8

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you

wish to interrupt viewing temporarily (during a meal, for example).

1. Press the POWER

P

button on the remote control.

The screen is turned off and a standby indicator appears on your set.

2.

To switch your set back on, simply press the POWER

P

button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to

unplug the set from the mains and aerial.

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently.

1. Press the POWER button on the remote control. control. The message You can set the

menu language. is displayed.

2.

Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER

E

button to conrm your choice.

3. Press the ◄ or ► button to select Store Demo or Home Use, then the ENTER

E

button.

We recommend setting the TV to Home Use mode for the best picture in your home environment.

Store Demo mode is only intended for use in retail environments.

If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the Volume

button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

4.

Press the ENTER

E

button. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER

E

button to

conrm your choice.

5. Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTER

E

button to select Start.

Digital & Analogue: Digital and Analogue channels.

Digital: Digital channels.

Analogue: Analogue channels.

The channel search will start and end automatically.

Press the ENTER

E

button at any time to interrupt the memorization process.

After all the available channels are stored, the message Set the Clock Mode. is displayed.

6.

Press the ENTER

E

button. Press the ▲ or ▼ button to select Auto, then Press the ENTER

E

button.

If you select Manual, Set current date and time is displayed.

If you have received a digital signal, the time will be set automatically. If not, select Manual to set the clock. (refer to page

19)

7

. The connection method to provide the best quality HD is offered. After conrming the method, press the ENTER

E

button.

8. The message Enjoy your TV is displayed. When you have nished, press the ENTER

E

button.

If you want to reset this feature...

1.

Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER

E

button.

2. Press the ENTER

E

button again to select Plug & Play.

3. Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-0-0’.

If you want to change PIN number, use the Change PIN function. (refer to page 20)

The Plug & Play feature is only available in the TV mode.

¦

N

¦

N

Plug & Play

You can set the menu language.

Menu Language : English ►

E

Enter

[350_Tunisia]BN68-02394A-00L02.i8 8 2009-07-03 ¿ÀÀü 9:24:42

English - 9

Viewing the Display

The display identifies the current channel and the status of certain audio-video settings.

Press the INFO button to viewing the information.

Press the INFO button on the remote control. The TV will display the channel, the type of

sound, and the status of certain picture and sound settings.

▲, ▼: You can view other channel’s information. If you want to move to the currently

selected channel, press ENTER

E

button.

◄, ►: You can view the desired program’s information at the current channel.

Press the INFO button once more or wait approximately 10 seconds and the display

disappears automatically.

CHANNEL CONTROL

ConguringtheChannelMenu

Country

The PIN number input screen appears. Enter your 4 digit PIN number.

Analogue Channel

You can change the country for analogue channels.

Digital Channel

You can change the country for digital channels.

Auto Store

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated

programme numbers may not correspond to actual or desired programme numbers.

If a channel is locked using the Child Lock function, the PIN input window appears.

Digital & Analogue

Digital and Analogue channels.

Digital

Digital channels.

Analogue

Analogue channels.

Manual Store

Scans for a channel manually and stores it in the TV’s memory.

If a channel is locked using the Child Lock function, the PIN input window appears.

Digital Channel

Manual store for digital channels.

Digital Channel is only available in DTV mode.

Channel: Set the Channel number using the ▲, ▼ or number (0~

9) buttons.

Frequency: Set the frequency using the number buttons.

Bandwidth: Set the bandwidth using the ▲, ▼ or number (0~

9) buttons.

When it has nished, channels are updated in the channel list.

¦

O

●

N

¦

❑

N



❑

N



❑

N



N

●

N

Country   ►

Auto Store

Manual Store

Now & Next Guide

Full Guide

Default Guide

: Now/Next

Channel List

Channel

DTV Air

15

abc1

18:00 ~ 6:00

18:11 Thu 6 Jan

Life On Venus Avenue

Unclassified

No Detaild Information

'

INFO

[350_Tunisia]BN68-02394A-00L02.i9 9 2009-07-03 ¿ÀÀü 9:24:42

English - 10

Analogue Channel

Manual store for analogue channel.

Programme (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number (0~9)

buttons.

Colour System → Auto / PAL / SECAM / NTSC4.43: Sets the colour system value using the ▲ or ▼ button.

Sound System → BG / DK / I / L: Sets the sound system value using the ▲ or ▼ button.

Channel (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C (Air channel) or

S (Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the required number.

You can also select the channel number directly by pressing the number (0~9) buttons.

If there is abnormal sound or no sound, reselect the sound standard required.

Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the

frequency range until the rst channel or the channel that you selected is received on the screen.

Store (When you store the channel and associated programme number): Set to OK by pressing the

ENTER

E

button.

Channel mode

P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position

numbers from P00 to P99. You can select a channel by entering the position number in this mode.

C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this

mode.

S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.

Now & Next Guide / Full Guide

The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out

of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information

becomes available.

For detailed procedures on using Now & Next Guide and Full Guide, refer to the descriptions on page 11.

You can also display the guide menu simply by pressing the GUIDE button. (To congure the Default Guide, refer to the

descriptions.)

Now & Next Guide

For the six channels indicated in the left-hand column, displays the Current programme and the Next programme information.

Full Guide

Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which

may be scrolled forwards or backwards in time.

DefaultGuide→Now&NextGuide/FullGuide

You can decide whether to display either the Now & Next Guide or the Full Guide when the GUIDE button on the remote control

is pressed.

Channel List

For detailed procedures on using the Channel List, refer to the ‘Managing Channels’ instructions.

You can select these options by simply pressing the CH LIST button on the remote control.

Channel Mode

When press the P

>

/

<

button, Channels will be switched within the selected channel list.

Added Ch.

Channels will be switched within the memorized channel list.

Favourite Ch.

Channels will be switched within the favourite channel list.

Fine Tune

If the reception is clear, you do not have to ne tune the channel, as this is done automatically during the search and store

operation. If the signal is weak or distorted, you may have to ne tune the channel manually.

Fine tuned channels that have been saved are marked with an asterisk ‘*’ on the right-hand side of the channel number in the

channel banner.

To reset the ne-tuning, select Reset by pressing the ▲ or ▼ button and then press the ENTER

E

button.

Only Analogue TV channels can be ne tuned.

LNA(LowNoiseAmplier)

If the TV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplier boosts the

incoming signal).

Not available in DTV or external input mode.



●

N

●

N

–

❑

N

O



❑

O

❑



❑

N

❑

N

[350_Tunisia]BN68-02394A-00L02.i10 10 2009-07-03 ¿ÀÀü 9:24:43

English - 11

Using the Now & Next Guide / Full Guide

To... Then...

Watch a programme in the EPG list Select a programme by pressing the ▲, ▼, ◄, ► button.

Exit the guide Press the blue button

If the next programme is selected, it is scheduled with the clock icon displayed. If the ENTER

E

button is pressed again, press

the ◄, ► button to select Cancel Schedules, the scheduling is cancelled with the clock icon gone.

View programme information Select a programme of your choice by pressing the ▲, ▼, ◄, ► button.

Then press the INFO button when the programme of your choice is

highlighted.

The programme title is on the upper part of the screen centre.

Please click on INFO button for detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality

Information (HD / SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the highlighted

programme are included on the detailed information. ‘...’ will be appeared if the summary is long.

Toggle between the Now & Next Guide and Full

Guide

Press the red button repeatedly.

In Full Guide

Scrolls backwards quickly (24 hours).

Scrolls forwards quickly (24 hours).

Press the green button repeatedly.

Press the yellow button repeatedly.

Managing Channels

Using this menu, you can Add / Delete or set Favourite channels and use the programme guide for digital broadcasts.

All Channels

Shows all currently available channels.

Added Channels

Shows all added channels.

Favourites

Shows all favourite channels.

To select the Favourites channels you have set up, press the FAV.CH button on the remote

control.

Programmed

Shows all current reserved programmes.

Select a channel in the All Channels, Added Channels or Favourites screen by pressing the ▲ / ▼ buttons, and pressing

the ENTER

E

button. Then you can watch the selected channel.

Using the Colour buttons with the Channel List

Red (Channel Type): Toggle between your TV, Radio, Data / Other and All.

Green (Zoom): Enlarges or shrinks a channel number.

Yellow (Select): Selects multiple channel lists. You can perform the add / delete, add to Favourites / delete from

Favourites, or lock / unlock function for multiple channels at the same time. Select the required channels and press the

yellow button to set all the selected channels at the same time. The

c

mark appears to the left of the selected channels.

TOOLS (Tools): Displays the Delete (or Add), Add to Favourite (or Delete from Favourite), Lock (or Unlock), Timer

Viewing, Edit Channel Name, Sort, Edit Channel Number, Select All (or Deselect All), Auto Store menu. (The

Options menus may differ depending on the situation.)

¦



O



N

–

824 UKTV Gold

825 UKTV style

A

1 C --

A

2 C --

A

3 ♥ C --

A

4 C --

A

5 C --

A

6 C --

A

7 C --

Added Channels

All ■ Channel Type ■ Zoom ■ Select T Tools

Now & Next Guide

DTV Air 900 f tn 2:10 Tue 1 Jun

Freshmen On Campus

2:00 - 2:30

No Detailed Information

Now Next

Mint Extra

Loaded

Fresh 40 with Dynamite MC

The Distillery

Smash Hits! Sunday

1 f tn

2 ITV Play

3 Kerrang!

4 Kiss

5 oneword

6 Smash Hits!

▼

Street Hypn..

Kisstory

No Information

Freshmen O..

Watch

INFO

Information■FullGuide■Exit

Full Guide

DTV Air 900 f tn 2:10 Tue 1 Jun

Freshmen On Campus

2:00 - 2:30

No Detailed Information

Today 16:00 - 17:00 17:00 - 18:00

Mint Extra

Loaded

Fresh 40 with Dynamite MC

The Distillery

Smash Hits! Sunday

1 f tn

2 ITV Play

3 Kerrang!

4 Kiss

5 oneword

6 Smash Hits!

▼

Street Hypn..

Kisstory

No Information

Freshmen O..

Watch

INFO

Information■Now / Next■ +24 Hours ■ Exit

[350_Tunisia]BN68-02394A-00L02.i11 11 2009-07-03 ¿ÀÀü 9:24:43

English - 12

Channel Status Display Icons

A

: An analogue channel.

c

: A channel selected by pressing the yellow button.

*

: A channel set as a Favourite.

(

: A programme currently being broadcast.

\

: A locked channel.

)

: A reserved programme

Channel List Option Menu (in All Channels / Added Channels / Favourites)

Press the TOOLS button to use the option menu.

Option menu items may differ depending on the channel status.

Add / Delete

You can delete or add a channel to display the channels you want.

All deleted channels will be shown on All Channels menu.

A gray-coloured channel indicates the channel has been deleted.

The Add menu only appears for deleted channels.

You can also delete a channel from the Added Channels or Favourites menu in the

same manner.

Add to Favourite / Delete from Favourite

You can set channels you watch frequently as favourites.

Press the TOOLS button to display the Tools menu. You can also set the add to (or delete

from) Favourite by selecting Tools→Add

toFavourite (or Delete from Favourite).

The ‘

*

’ symbol will be displayed and the channel will be set as a favourite.

All favourite channels will be shown on Favourites menu.

Timer Viewing

If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel List;

even when you are watching another channel. To reserve a programme, set the current time rst. (See page 19.)

Only memorized channels can be reserved.

You can set the channel, day, month, year, hour and minute directly by pressing the number buttons on the remote control.

Reserving a programme will be shown in the Programmed menu.

Digital Programme Guide and Viewing Reservation

When a digital channel is selected, and you press the ► button, the Programme Guide for the channel appears.

You can

reserve a programme according to the procedures described above.

Edit Channel Name (analogue channels only)

Channels can labelled so that their call letters appear whenever the channel is selected.

The names of digital broadcasting channels are automatically assigned and cannot be labelled.

Edit Channel Number (digital channels only)

You can also edit the channel number by pressing the number buttons on the remote control.

Sort (analogue channels only)

This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using

the auto store.

Lock / Unlock

You can lock a channel so that the channel cannot be selected and viewed. This function is available only when the Child Lock is

set to On. (see page 20)

The PIN number input screen appears. Enter your 4 digit PIN number.

The default PIN number of a new TV set is ‘0-0-0-0’. You can change the PIN, by selecting Change PIN from the menu.

The ‘

\

’ symbol will be displayed and the channel will be locked.

Select All / Deselect All

Select All: You can select all the channels in the channel list.

Deselect All: You can deselect all the selected channels.

You can only select Deselect All when there is a selected channel.

Auto Store

For further details on setting up options, refer to page 9.

If a channel is locked using the Child Lock function, the PIN input window appears.

N

●

N



N



T

N



N



N



N



●

N



N

824 UKTV Gold

825 UKTV style

A

1 C --

A

2 C --

A

3 ♥ C --

A

4 C --

A

5 C --

A

6 C --

A

7 C --

Added Channels

All ■ Channel Type ■ Zoom ■ Select T Tools

Delete

Add to Favourite

Timer Viewing

Edit Channel Name

Sort

Lock

▼

[350_Tunisia]BN68-02394A-00L02.i12 12 2009-07-03 ¿ÀÀü 9:24:43

English - 13

Channel List Option Menu (in Programmed )

You can view, modify or delete a reservation.

Press the TOOLS button to use the option menu.

Change Info

Select to change a viewing reservation.

Cancel Schedules

Select to cancel a viewing reservation.

Information

Select to view a viewing reservation. (You can also change the reservation information.)

Select All

Select all reserved programmes.

PICTURE CONTROL

ConguringthePictureMenu

Mode

You can select the type of picture which best corresponds to your viewing requirements.

Press the TOOLS button to display the Tools menu. You can also set the picture mode by

selecting Tools→PictureMode.

Dynamic

Selects the picture for high-denition in a bright room.

Standard

Selects the picture for the optimum display in a normal environment.

Movie

Selects the picture for viewing movies in a dark room.

Backlight / Contrast / Brightness / Sharpness / Colour / Tint(G/R)

Your television has several setting options that allow you to control the picture quality.

Backlight: Adjusts the brightness of LCD back light.

Contrast: Adjusts the contrast level of the picture.

Brightness: Adjusts the brightness level of the picture

Sharpness: Adjusts the edge denition of the picture.

Colour: Adjusts colour saturation of the picture.

Tint(G/R): Adjusts the colour tint of the picture.

Select a picture mode to be adjusted rst. The adjusted values are saved for each picture mode.

When you make changes to Backlight, Contrast, Brightness, Sharpness, Colour or Tint(G/R), the OSD will be adjusted

accordingly.

In analogue TV, Ext., AV modes of the PAL system, you cannot use the Tint(G/R) Function.

In PC mode, you can only make changes to Backlight, Contrast and Brightness.

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

The energy consumed during use can be signicantly reduced if the brightness level of the picture is reduced, which will

reduce the overall running cost.

Advanced Settings

Samsung’s new TVs allow you to make even more precise picture settings than previous

models. See below to adjust detailed picture settings.

Advanced Settings is available in Standard or Movie mode.

In PC mode, you can only make changes to Gamma and White Balance from among the

Advanced Settings items.

BlackTone→Off/Dark/Darker/Darkest

You can select the black level on the screen to adjust the screen depth.

N



¦

❑

T



❑

●

N

❑

N



1 / 1 / 2009

13:59 5 TV1

Quincy, M.E

18:59 2 TV3

The Equalizer

20:59 2 TV3

McMillan & Wife

Programmed

All■Zoom■Select

T

Tools

E

Information

Change Info

Cancel Schedules

Information

Select All

Mode :Standard ►

Backlight : 7

Contrast : 95

Brightness : 45

Sharpness : 50

Colour : 50

Tint (G / R) : G50 / R50

Picture

Colour : 50

Tint (G / R) : G50 / R50

AdvancedSettings  ►

Picture Options

Picture Reset

Picture

[350_Tunisia]BN68-02394A-00L02.i13 13 2009-07-03 ¿ÀÀü 9:24:43

English - 14

DynamicContrast→Off/Low/Medium/High

You can adjust the screen contrast so that the optimal contrast is provided.

Gamma

You can adjust the Primary Colour (Red, Green, Blue) Intensity.

Colour Space

Colour Space is a colour matrix composed of red, green and blue colours. Select your favourite Colour Space to experience the

most natural colour.

Native: Native Colour Space offers deep and rich colour tone.

Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on programme sources.

White Balance

You can adjust the colour temperature for more natural picture colours.

R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain: You can adjust the Colour ‘temperature’ in the light areas by

changing the values of R, G, B. Recommended for advanced users only.

Reset: The previously adjusted white balance will be reset to the factory defaults.

Flesh Tone

You can emphasize the pink ‘esh tone’ in the picture.

Changing the adjustment value will refresh the adjusted screen.

EdgeEnhancement→Off/On

You can emphasize object boundaries in the picture.

Picture Options

In PC mode, you can only make changes to the Colour Tone and Size from among the items in Picture Options.

ColourTone→Cool/Normal/Warm1/Warm2

You can select the most comfortable colour tone to your eyes.

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

Warm1 or Warm2 is only activated when the picture mode is Movie.

Size

You can select the picture size which best corresponds to your viewing requirements.

Press the TOOLS button to display the Tools menu. You can also set the size by selecting Tools→PictureSize.

Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.

16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.

Wide Zoom: Magnify the size of the picture more than 4:3.

Zoom: Magnies the 16:9 wide picture (in the vertical direction) to t the screen size.

4:3: This is the default setting for a video movie or normal broadcasting.

Screen Fit: Use the function to see the full image without any cut-off when HDMI (720p / 1080i) or Component (1080i) signals

are input.

Depending on the input source, the picture size options may vary.

The items available may differ depending on the selected mode.

In PC Mode, only 16:9 and 4:3 mode can be adjusted.

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

Temporary image retention may occur when viewing a static image on the set for more than two hours.

Wide Zoom: Press the ► button to Select Position, then press the ENTER

E

button. Press the ▲ or ▼ button to move the

picture up / down. Then press the ENTER

E

button.

Zoom: Press the ► button to Select Position, then press the ENTER

E

button. Press the ▲ or ▼ button to move the picture

up and down. Then press the ENTER

E

button. Press the ► button to Select Size, then press the ENTER

E

button. Press

the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTER

E

button.

After selecting Screen Fit in HDMI (1080i) or Component (1080i) mode: Select Position by pressing the ◄ or ►button. Use

the ▲, ▼, ◄ or ► button to move the picture.

Reset: Press the ◄ or ► button to select Reset, then press the ENTER

E

button. You can initialize the setting.

If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the Overscan

function.



●



●



N



❑

N



N



T

●

N

[350_Tunisia]BN68-02394A-00L02.i14 14 2009-07-03 ¿ÀÀü 9:24:43

English - 15

ScreenMode→16:9/WideZoom/Zoom/4:3

When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS

(Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is

intended for users to select it.

16:9: Sets the picture to 16:9 wide mode.

Wide Zoom: Magnify the size of the picture more than 4:3.

Zoom: Magnify the size of the picture vertically on screen.

4:3: Sets the picture to 4:3 normal mode.

This function is available in Auto Wide mode.

This function is not available in PC, Component or HDMI mode.

DigitalNR→Off/Low/Medium/High/Auto

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static

and ghosting that may appear on the screen.

When the signal is weak, select one of the other options until the best picture is displayed.

HDMIBlackLevel→Normal/Low

You can directly select the black level on the screen to adjust the screen depth.

This function is active only when the external input connects to HDMI (RGB signals).

FilmMode→Off/Auto

The TV can be set to automatically sense and process lm signals from all sources and adjust the picture for optimum quality.

Film Mode is supported in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).

PictureReset→ResetPictureMode/Cancel

Resets all picture settings to the default values.

Select a picture mode to be reset. The reset is performed for each picture mode.

Reset Picture Mode: Current picture values return to default settings.

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different,

depending upon your particular version of Windows and your particular video card. However, even if your actual screens look

different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung

Dealer.)

1. First, click on ‘Control Panel’ on the Windows start menu.

2.

When the control panel window appears, click on ‘Appearance and Themes’ and a display dialog-box will appear.

3.

When the control panel window appears, click on ‘Display’ and a display dialogbox will appear.

4.

Navigate to the ‘Settings’ tab on the display dialog-box.

The correct size setting (resolution) - Optimum : 1360 x 768 pixels.

If a vertical-frequency option exists on your display settings dialog box, the correct value is ‘60’ or ‘60 Hz’. Otherwise, just click

‘OK’ and exit the dialog box.



●

N



N



N



N

❑

N

●

¦

[350_Tunisia]BN68-02394A-00L02.i15 15 2009-07-03 ¿ÀÀü 9:24:44

English - 16

Display Modes

Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are

recommended.

D-Sub and HDMI/DVI Input

Mode Resolution

Horizontal Frequency

(KHz)

Vertical Frequency

(Hz)

Pixel Clock Frequency

(MHz)

Sync Polarity

(H / V)

IBM 640 x 350 31.469 70.086 25.175 +/-

720 x 400 31.469 70.087 28.322 -/+

MAC 640 x 480 35.000 66.667 30.240 -/-

832 x 624 49.726 74.551 57.284 -/-

VESA CVT 720 x 576 35.910 59.950 32.750 -/+

1280 x 720 44.772 59.855 74.500 -/+

1280 x 720 56.456 74.777 95.750 -/+

VESA DMT 640 x 480 31.469 59.940 25.175 -/-

640 x 480 37.500 75.000 31.500 -/-

640 x 480 37.861 72.809 31.500 -/-

800 x 600 37.879 60.317 40.000 +/+

800 x 600 46.875 75.000 49.500 +/+

800 x 600 48.077 72.188 50.000 +/+

1024 x 768 48.363 60.004 65.000 -/-

1024 x 768 56.476 70.069 75.000 -/-

1024 x 768 60.023 75.029 78.750 +/+

1360 x 768 47.712 60.015 85.500 +/+

VESA GTF 1280 x 720 52.500 70.000 89.040 -/+

When using an HDMI / DVI cable connection, you must use the HDMI IN 1(DVI) jack.

The interlace mode is not supported.

The set might operate abnormally if a non-standard video format is selected.

Separate and Composite modes are supported. SOG is not supported.

Setting up the TV with your PC

Preset: Press the SOURCE button to select PC mode.

Auto Adjustment

Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC video signal.

The values of ne, coarse and position are adjusted automatically.

This function does not work in DVI-HDMI mode.

Press the TOOLS button to display the Tools menu. You can also set the Auto Adjustment

by selecting Tools→Auto

Adjustment.

Screen

Coarse / Fine

The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone,

then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture

so that it is aligned on the centre of screen.

PC Position

Adjust the PC’s screen positioning if it does not t the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position. Press

the ◄ or ► button to adjust the Horizontal-Position.

Image Reset

You can replace all image settings with the factory default values.



N

¦

N

❑

N

T

❑



Brightness : 45

Sharpness : 50

AutoAdjustment   ►

Screen

Advanced Settings

Picture Options

Picture Reset

Picture

[350_Tunisia]BN68-02394A-00L02.i16 16 2009-07-03 ¿ÀÀü 9:24:44

English - 17

SOUND CONTROL

ConguringtheSoundMenu

Mode→Standard/Music/Movie/ClearVoice/Custom

You can select a sound mode to suit your personal preferences.

Press the TOOLS button to display the Tools menu. You can also congure the sound

mode by selecting Tools→SoundMode.

Standard

Selects the normal sound mode.

Music

Emphasizes music over voices.

Movie

Provides the best sound for movies.

Clear Voice

Emphasizes voice over other sounds.

Custom

Recalls your customized sound settings.

Equalizer

The sound settings can be adjusted to suit your personal preferences.

Mode

You can select a sound mode to suit your personal preferences.

Balance

Controls the balance between the right and left speakers.

100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment)

To adjust the level of different bandwidth frequencies

Reset

Resets the equalizer settings to the default values.

SRSTruSurroundHD→Off/On

SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two

speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system,

including internal television speakers. It is fully compatible with all multichannel formats.

Press the TOOLS button to display the Tools menu. You can also set the SRS TruSurround HD by selecting Tools→SRSTS

HD.

Audio Language (digital channels only)

You can change the default value for audio languages. Displays the language information for the incoming stream.

You can only select the language among the actual languages being broadcast.

AudioFormat→MPEG/DolbyDigital(digital channels only)

When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed

difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.

The Audio Format appears according to the broadcasting signal.

¦

❑

T



❑



❑

T

❑

N

❑

N

Mode :Custom ►

Equalizer

SRS TruSurround HD : Off

Audio Language : - - -

Audio Format : - - -

Audio Description

Auto V

olume : Off

Sound

[350_Tunisia]BN68-02394A-00L02.i17 17 2009-07-03 ¿ÀÀü 9:24:44

English - 18

Audio Description (digital channels only)

This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the

Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the

Audio Description On or Off and control the volume.

Press the AD button on the remote control to select Off or On.

AudioDescription→Off/On

Turn the audio description function on or off.

Volume

You can adjust the audio description volume.

Volume is active when Audio Description is set to On.

AutoVolume→Off/On

Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is

changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the

modulation signal is high or by raising the sound output when the modulation signal is low.

Auto Volume is not available in Component and HDMI mode.

SpeakerSelect→ExternalSpeaker/TVSpeaker

If you want to hear the sound through separate speakers, cancel the internal amplier.

The volume and MUTE buttons do not operate when the Speaker Select is set to External Speaker.

If you select External Speaker in the Speaker Select menu, the sound settings will be limited.

SoundReset→ResetAll/ResetSoundMode/Cancel

You can restore the Sound settings to the factory defaults.

Reset Sound Mode: Current sound values return to default settings.

Selecting the Sound Mode

You can set the sound mode in the Tools menu. When you set to Dual l ll, the current sound mode is displayed on the screen.

Audio Type Dual 1 / 2 Default

A2 Stereo

Mono MONO

Automatic change

Stereo STEREO↔MONO

Dual DUAL

1↔DUAL2 DUAL 1

NICAM

Stereo

Mono MONO

Automatic change

Stereo MONO↔STEREO

Dual

MONO↔DUAL

1

DUAL 2

DUAL 1

If the stereo signal is weak and an automatic switching occurs, then switch to the mono.

This function is only activated in stereo sound signal. It is deactivated in mono sound signal.

This function is only available in TV mode.

❑

O



N

❑

N

❑

N

❑

N

¦

N

[350_Tunisia]BN68-02394A-00L02.i18 18 2009-07-03 ¿ÀÀü 9:24:44

La page est en cours de chargement...

Samsung LE32B350F1W Manuel utilisateur

Samsung LE32B350F1W Manuel utilisateur

dans d''autres langues

Documents connexes