Huawei P30 Pro Manuel utilisateur

Quick Start Guide

Guide de démarrage rapide

Schnellstartanleitung

Guida di avvio rapido

Guía de inicio rápido

Guia de Início Rápido

Snelstartgids

VOG-L29

Contents

English............................................................................... 1

Français............................................................................13

Deutsch............................................................................ 28

Italiano..............................................................................42

Español............................................................................ 54

Português.........................................................................68

Nederlands.......................................................................80

i

English

Know Your Device

Before using the device, familiarise yourself with its basic

operations.

• To power on your device, press and hold the power

button until the screen turns on.

• To power off your device, press and hold the power

button, and then touch .

• To restart your device, press and hold the power button,

and then touch .

• Press and hold the power button for 10 or more seconds

to forcibly restart your device.

NFC

4

1

2

5

3

Volume button Power button

Type-C port /

Headset jack Card slot

In-screen fingerprint

• Please keep the NFC area close to other devices or

objects while using the NFC function.

• Check out the pre-installed Tips app and master all

the great features on your device.

1

Getting Started

• Do not insert or remove the SIM card when your

device is powered on.

• Ensure that the card is correctly aligned and its

notch is first inserted into the card tray.

• Be careful not to scratch your device or hurt yourself

when using the eject pin.

• Store the eject pin out of the reach of children to

prevent accidental swallowing or injury.

• Do not use cut or modified SIM or NM cards (nano

memory cards) with your device as these may not

be recognised and could damage the card tray

(slot).

• If your SIM card does not match your device, please

contact your network provider.

Follow the instructions in the following figures to set up

your device. Please use the eject pin included.

3

2

1

nano-SIM 1

nano-SIM 2

NM Card

nano-SIM 1

2

Dual SIM Card Management

Your device supports dual card dual standby. Under

Settings > Wireless & networks > Dual SIM settings,

select the default mobile data card and calling card as

needed.

Dual 4G

• If both of your SIM cards support 4G services, when one

of them is active on a 4G voice call, you will be prompted

to handle any new call to the other SIM card. Answering

the new call will automatically end the active call.

• The default mobile data SIM card can still be used for

Internet surfing on a 4G network when the other card is

on a 4G voice call.

• Some of the aforementioned features may be

unavailable in certain areas due to network

interference.

• 4G voice services require the support of your

network provider and the deployment of relevant

services. Contact your network provider to activate

4G services.

• If this guide is inconsistent with the description on

the official website, the latter prevails.

3

For More Information

If you encounter any problems whilst using your device,

you can get help from the following resources:

• Visit https://consumer.huawei.com/en to view device

information, frequently asked questions and other

information.

• Visit https://consumer.huawei.com/en/support for the

most up-to-date contact information for your country or

region.

Go to Settings and touch System > About phone > Legal

to view legal information for your product.

Go to Settings and touch System > About phone > Legal

> Safety information to view safety information for your

product.

Go to Settings and touch System > About phone >

Authentication info to view regulatory information for your

product.

Go to Settings and touch System > Certification logos to

view more information on certification logos for your

product.

All pictures and illustrations in this guide, including but

not limited to the device colour, size, and display

content, are for your reference only. The actual device

may vary. Nothing in this guide constitutes a warranty

of any kind, express or implied.

4

Safety Information

Please read all of the safety information carefully before

using your device to ensure its safe and proper operation

and to learn how to dispose of your device properly.

Operation and Safety

• To prevent possible hearing damage, do not

listen at high volume levels for long periods.

• Using an unapproved or incompatible power adapter,

charger or battery may damage your device, shorten its

lifespan or cause a fire, explosion or other hazards.

• Ideal operating temperatures are 0 °C to 35 °C. Ideal

storage temperatures are -20 °C to +45 °C.

• Pacemaker manufacturers recommend maintaining a

minimum distance of 15 cm between a pacemaker and a

wireless device to prevent potential interference with the

pacemaker. If using a pacemaker, hold the device on the

side opposite the pacemaker and do not carry the device

in your front pocket.

• Keep the device and the battery away from fire,

excessive heat and direct sunlight. Do not place them on

or in heating devices, such as microwave ovens, water

heaters, stoves or radiators.

• Adhere to local laws and regulations while using the

device. To reduce the risk of accidents, do not use your

wireless device while driving. If you must make or

answer a call, stop your vehicle at a safe location first.

• While flying in an aircraft or immediately before

boarding, ensure that you use your device according to

the instructions provided. Using a wireless device in an

aircraft may disrupt wireless networks, present a hazard

to aircraft operations or be illegal under law.

• To prevent damage to your device's parts or internal

circuits, do not use it in dusty, smoky, damp or dirty

environments or near magnetic fields.

• When charging the device, make sure the power adapter

is plugged into a socket near the devices and is easily

accessible.

• Unplug the charger from the electric socket and from the

device when not in use.

5

• Do not use, store or transport the device where

flammables or explosives are stored (e.g. in a petrol

station, oil depot or chemical plant). Using your device in

these environments increases the risk of explosion or

fire.

• Dispose of this device, the battery and accessories

according to local regulations. They should not be

disposed of in normal household waste. Improper battery

use may lead to fire, explosion or other hazards.

• Please consult your doctor and the device manufacturer

to determine if operation of your device may interfere

with the operation of your medical device.

• Adhere to any rules or regulations set forth by hospitals

and health care facilities.

• This device contains a built-in battery. Do not attempt to

replace the battery by yourself. Otherwise, the device

may not run properly or it may damage the battery. For

your personal safety and to ensure that your device runs

properly, you are strongly advised to contact a Huawei

authorised service centre for a replacement.

• Your device has been tested in a controlled environment

and certified to be splash, water, and dust resistant in

specific situations (meets requirements of classification

IP68 as described by the international standard IEC

60529). Splash, water, and dust resistance are not

permanent conditions and resistance might decrease as

a result of normal wear. Do not charge your device in

wet conditions. Visit https://consumer.huawei.com/en/

support for detailed description of this function.

Potentially Explosive Atmosphere

Power off your device in any area with a potentially

explosive atmosphere, and comply with all signs and

instructions. Areas that may have potentially explosive

atmospheres include the areas where you would normally

be advised to turn off your vehicle engine. Triggering of

sparks in such areas could cause an explosion or a fire,

resulting in bodily injuries or even deaths. Do not power on

your device at refueling points such as service stations.

Comply with restrictions on the use of radio equipment in

fuel depots, storage, and distribution areas, and chemical

plants. In addition, adhere to restrictions in areas where

blasting operations are in progress. Before using the

device, watch out for areas that have potentially explosive

atmospheres that are often, but not always, clearly marked.

6

Such locations include areas below the deck on boats,

chemical transfer or storage facilities, and areas where the

air contains chemicals or particles such as grain, dust, or

metal powders. Ask the manufacturers of vehicles using

liquefied petroleum gas (such as propane or butane)

whether this device can be safely used in their vicinity.

Disposal and recycling information

The crossed-out wheelie bin symbol on your product,

battery, literature or packaging reminds you that all

electronic products and batteries must be taken to separate

waste collection points at the end of their working lives;

they must not be disposed of in normal household waste. It

is the responsibility of the user to dispose of the equipment

using a designated collection point or service for separate

recycling of waste electrical and electronic equipment

(WEEE) and batteries according to local laws.

Proper collection and recycling of your equipment helps

ensure EEE waste is recycled in a manner that conserves

valuable materials and protects human health and the

environment. Improper handling, accidental breakage,

damage, and/or improper recycling at the end of its life may

be harmful for your health and the environment. For more

information about where and how to drop off your EEE

waste, please contact your local authorities, retailer or

household waste disposal service or visit the website

https://consumer.huawei.com/en/.

Reduction of hazardous substances

This device and any electrical accessories are compliant

with local applicable rules on the restriction of the use of

certain hazardous substances in electrical and electronic

equipment, such as EU REACH, RoHS and Batteries

(where included) regulations, etc. For declarations of

conformity about REACH and RoHS, please visit our web

site https://consumer.huawei.com/certification.

EU Regulatory Conformance

Body worn operation

The device complies with RF specifications when used

near your ear or at a distance of 0.50 cm from your body.

Ensure that the device accessories, such as a device case

7

and device holster, are not composed of metal

components. Keep the device away from your body to meet

the distance requirement.

The highest SAR value reported for this device type when

tested at the ear is

VOG-L29 0.64 W/kg

And when properly worn on the body is

VOG-L29 0.99 W/kg

Statement

Hereby, Huawei Technologies Co., Ltd. declares that this

device VOG-L29 is in compliance with the essential

requirements and other relevant provisions of Directive

2014/53/EU.

The most recent and valid version of the DoC (Declaration

of Conformity) can be viewed at https://

consumer.huawei.com/certification.

This device may be operated in all member states of the

EU.

Observe national and local regulations where the device is

used.

This device may be restricted for use, depending on the

local network.

Restrictions in the 2.4 GHz band:

Norway: This subsection does not apply for the

geographical area within a radius of 20 km from the centre

of Ny-Ålesund.

Restrictions in the 5 GHz band:

The 5150 to 5350 MHz frequency range is restricted to

indoor use in: AT, BE, BG, CH, CY, CZ, DE, DK, EE, EL,

ES, FI, FR, HR, HU, IE, IS, IT, LI, LT, LU, LV, MT, NL, NO,

PL, PT, RO, SE, SI, SK, TR, UK(NI).

In accordance with the relevant statutory requirements in

the UK, the 5150 to 5350 MHz frequency range is restricted

to indoor use in the United Kingdom.

Frequency Bands and Power

(a) Frequency bands in which the radio equipment

operates: Some bands may not be available in all countries

or all areas. Please contact the local network provider for

more details.

(b) Maximum radio-frequency power transmitted in the

frequency bands in which the radio equipment operates:

8

The maximum power for all bands is less than the highest

limit value specified in the related Harmonised Standard.

The frequency bands and transmitting power (radiated

and/or conducted) nominal limits applicable to this radio

equipment are as follows:

VOG-L29 GSM 900: 35 dBm, GSM 1800: 32 dBm,

WCDMA900/ 2100: 25.7 dBm, LTE Band

1/3/7/8/20/28/34/38/40: 25.7 dBm, Wi-Fi

2.4G: 20 dBm, Bluetooth: 20 dBm, Wi-Fi 5G:

5150-5250 MHz: 23 dBm, 5250-5350 MHz:

20 dBm, 5470-5725 MHz: 20 dBm,

5725-5850 MHz: 13dBm, NFC: 42 dBμA/m @

10 m, Wireless Power Charging: < 42

dBμA/m @ 10 m

Accessories and Software Information

Some accessories are optional in certain countries or

regions. Optional accessories can be purchased from a

licenced vendor as required. The following accessories are

recommended:

Adapters: HW-100400X00 (X represents the different plug

types used, which can be either C, U, J, E, B, A, I, R, Z or

K, depending on your region)

Batteries: HB486486ECW

Earphones: MEND1632B729000, Windy-C,

1331-3301-6001-TC-296, 618017

The product software version is VOG-L29:

9.1.0.84(C432E84R1P1). Software updates will be

released by the manufacturer to fix bugs or enhance

functions after the product has been released. All software

versions released by the manufacturer have been verified

and are still compliant with the related rules.

All RF parameters (for example, frequency range and

output power) are not accessible to the user, and cannot be

changed by the user.

For the most recent information about accessories and

software, please see the DoC (Declaration of Conformity)

at https://consumer.huawei.com/certification.

ErP Product Information

Huawei Technologies Co., Ltd. hereby declares that its

products conform to the Energy-related Products Directive

(ErP) 2009/125/EC. For detailed ErP information and the

user manuals required by Commission Regulation, please

visit: https://consumer.huawei.com/en/certification.

9

FCC Regulatory Compliance

Body worn operation

The device complies with RF specifications when used

near your ear or at a distance of 1.50 cm from your body.

Ensure that the device accessories, such as a device case

and device holster, are not composed of metal

components. Keep the device away from your body to meet

the distance requirement.

Certification information (SAR)

This device is also designed to meet the requirements for

exposure to radio waves established by the Federal

Communications Commission (USA).

The SAR limit adopted by the USA is 1.6 W/kg averaged

over one gram of tissue. The highest SAR value reported to

the FCC for this device type complies with this limit.

The highest SAR value reported to the FCC for this device

type when using it at the ear is

VOG-L29 0.79 W/kg

And when properly worn on the body is

VOG-L29 0.64 W/kg

And when using the Wi-Fi hotspot function is

VOG-L29 0.88 W/kg

FCC statement

This device has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This device generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause

harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a

particular installation. If this device does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to perform one or more of the following

operations to try to correct the interference:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and

receiver.

--Connect the device into an outlet on a circuit different

from that to which the receiver is connected.

10

--Consult the dealer or an experienced radio/TV technician

for help.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

Caution: Any changes or modifications to this device not

expressly approved by Huawei Technologies Co., Ltd. for

compliance could void the user's authority to operate the

device.

11

Legal Notice

Trademarks and Permissions

, , and are trademarks or

registered trademarks of Huawei Technologies Co., Ltd.

Manufactured under license from Dolby Laboratories.

Dolby, Dolby Atmos, and the double-D symbol are

trademarks of Dolby Laboratories.

Android is a trademark of Google LLC.

LTE is a trade mark of ETSI.

The Bluetooth

®

word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Huawei Technologies Co., Ltd. is under

license. Huawei Device Co., Ltd. is an affiliate of Huawei

Technologies Co., Ltd.

Wi-Fi

®

, the Wi-Fi CERTIFIED logo and the Wi-Fi logo are

trademarks of Wi-Fi Alliance.

The "Qi" symbol is a trademark of the Wireless Power

Consortium.

Privacy Policy

To better understand how we protect your personal

information, please see the privacy policy at

https://consumer.huawei.com/privacy-policy.

THIS DOCUMENT IS FOR INFORMATION PURPOSE

ONLY, AND DOES NOT CONSTITUTE ANY KIND OF

WARRANTIES.

12

Français

Apprenez le fonctionnement de

votre appareil

Avant d'utiliser votre appareil, veuillez vous familiariser

avec son fonctionnement de base.

• Pour mettre votre appareil sous tension, appuyez

longuement sur le bouton alimentation jusqu’à ce que

l’écran s’allume.

• Pour mettre votre appareil hors tension, appuyez

longuement sur le bouton d’alimentation, puis touchez

.

• Pour redémarrer votre appareil, appuyez longuement

sur le bouton d'alimentation, puis touchez .

• Maintenez enfoncé le bouton d'alimentation pendant

10 secondes ou plus pour forcer le redémarrage de

l'appareil.

NFC

4

1

2

5

3

Bouton du volume Bouton marche/arrêt

Port de type C / prise

jack pour casque

Emplacement pour

carte

Empreinte digitale

intégrée à l'écran

13

• Lorsque vous utilisez la fonction NFC, veuillez

maintenir la zone NFC à proximité des autres

appareils ou objets.

• Découvrez l'application préinstallée Astuces et

apprenez à maitriser toutes les excellentes

fonctions de votre appareil.

14

Prise en main

• N'insérez pas ni ne retirez la carte SIM lorsque

votre appareil est sous tension.

• Assurez-vous que la carte est correctement

orientée et son encoche insérée en premier dans le

tiroir de cartes.

• Faites attention de ne pas éraer votre appareil ni

de vous blesser en utilisant la broche d'éjection.

• Conservez la broche d'éjection hors de la portée

des enfants pour éviter toute ingestion ou blessure

accidentelle.

• N'utilisez pas de cartes SIM ou NM (cartes

mémoires nano) modiées ou découpées dans

votre appareil, car elles risquent de ne pas être

détectées ou d'endommager le tiroir de cartes

(emplacement).

• Si votre carte SIM ne correspond pas à votre

appareil, veuillez contacter votre opérateur.

Pour congurer votre appareil, suivez les instructions

présentées sur les illustrations suivantes. Veuillez utiliser

la broche d'éjection fournie.

Pour un usage optimal et vous orir une compatibilité

avec les services de votre opérateur, nous vous

recommandons de mettre votre carte SIM dans

l’emplacement SIM 1 indiqué ci-dessous.

3

2

1

nano-SIM 1

nano-SIM 2

NM Card

nano-SIM 1

15

Gestion de double SIM

Votre appareil prend en charge la double veille double

carte. Sous Paramètres > Sans l & réseaux > Gestion

des cartes SIM, sélectionnez la carte de données mobiles

et la carte d'appels par défaut selon vos besoins.

Double 4G

• Si vos 2 cartes SIM prennent en charge la 4G, lorsque

l'une d'entre elles est utilisée pour un appel vocal en

4G, il vous sera demandé de traiter tout nouvel appel

avec l'autre carte SIM. Prendre le nouvel appel mettra

automatiquement n à la communication en cours.

• La carte SIM de données mobiles par défaut peut

toujours être utilisée pour surfer sur Internet sur le

réseau 4G lorsque l'autre carte est utilisée pour un

appel vocal en 4G.

• Certaines fonctionnalités mentionnées ci-dessus

peuvent être indisponibles dans certaines zones en

raison d'interférences sur le réseau.

• Les services voix 4G requièrent la prise en charge

du réseau et le déploiement de services relatifs de

votre opérateur. Veuillez contacter votre opérateur

pour activer les services 4G.

• Si ce guide est en contradiction avec la description

sur le site Web ociel, cette dernière prévaudra.

16

La page charge ...

Huawei P30 Pro Manuel utilisateur

Ce manuel convient également à

Huawei P30 Pro Manuel utilisateur

dans d''autres langues

Documents connexes