TP-LINK TX3000E AX3000 Wi-Fi 6 Bluetooth 5.0 PCIe Adapter Mode d'emploi

Marque: TP-LINK

Modèle: TX3000E AX3000 Wi-Fi 6 Bluetooth 5.0 PCIe Adapter

Taper: Mode d'emploi

REV1.0.1 1910012694

User Guide

AX3000 Wi-Fi 6 Bluetooth 5.0 PCIe Adapter

Archer TX3000E

Contents

About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01

Chapter 1. Get to Know About Your Adapter . . . . . . . . . . . . . . . . . . . 02

Chapter 2. Connect to a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04

Chapter 3. Use Your Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 07

3. 1. Install Drivers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .08

3. 2. Join a Wireless Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .09

3. 3. Pair with Bluetooth Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .09

3. 4. Uninstall Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .09

Appendix: Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

About This Guide

This guide is a complement to Quick Installation Guide. The Quick Installation

Guide instructs you on quick installation, and this guide provides the product

overview and more detailed instructions for each steps.

When using this guide, please notice that features available of the adapter may

vary by model and software version. It may also vary by region or ISP. All images,

steps, and descriptions in this guide are only examples and may not reflect your

actual experience.

Conventions

In this guide, the following conventions are used:

Convention Description

Underlined Underlined words or phrases are hyperlinks. You can click to redirect to a

website or a specific section.

Teal Contents to be emphasized and texts on the web page are in teal, including

the menus, items, buttons, etc.

Note: Ignoring this type of note might result in a malfunction or damage to the

device.

Tips: Indicates important information that helps you make better use of your

device.

*Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications.

Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of 1)

environmental factors, including building materials, physical objects, and obstacles, 2) network conditions,

including local interference, volume and density of traffic, product location, network complexity, and

network overhead, and 3) AP limitations, including rated performance, location, connection quality, and AP

condition.

*Use of MU-MIMO requires AP to also support MU-MIMO.

*Use of 1024-QAM requires AP to also support 1024-QAM.

More Info

• The latest driver can be found at Download Center at

https://www.tp-link.com/support.

• The Quick Installation Guide (QIG) can be found where you find this guide or

inside the package of the product.

• Specifications can be found on the product page at https://www.tp-link.com.

• A TP-Link Community is provided for you to discuss our products at

https://community.tp-link.com.

Chapter 1

Get to Know About Your

Adapter

This chapter introduces the detail of the adapter.

Chapter 1 Get to Know about Your Adapter

The TP-Link Archer TX3000E supports the latest Bluetooth 5.0 technology,

achieving 2× faster speed and 4× broader coverage than Bluetooth 4.2 to

connect as more as you want and enjoy the smoother experience than ever.

With equipped 1024-QAM and MU-MIMO technology, Archer TX3000E delivers

faster and clearer Wi-Fi to take your PC’s Wi-Fi reception to the next level and

fully achieve the potential of your Wi-Fi 6 router.

• Supports IEEE 802.11ax/ac/n/a 5 GHz, IEEE 802.11ax/n/g/b 2.4 GHz

• Supports Bluetooth 5.0/4.2/4.0

• Supports infrastructure mode

• Maximum speed of up to 2402Mbps on 5GHz network and 574Mbps on 2.4GHz

network

• Supports WEP, WPA/WPA2/WPA3, WPA-PSK/WPA2-PSK,802.1X

• Windows 10 (64-bit) only

• Environment:

Operating Temperature: 0℃~40℃ (32℉~104℉)

Storage Temperature: -40℃~70℃ (-40℉~158℉)

Operating Humidity: 10%~90% non-condensing

Storage Humidity: 5%~90% non-condensing

Chapter 2

Connect to a Computer

This chapter introduces how to connect the adapter to your computer.

Please note that images are for demonstration only.

Chapter 2 Connect to a Computer

1. Turn off your computer, unplug the power cable then remove the case panel.

2. Connect the provided Bluetooth USB cable to the adapter.

Bluetooth USB cable

Adapter

3. Locate an available PCIE X1 slot and carefully insert the adapter.

Tip:

If the bracket is not suitable for your computer, detach it from the adapter’s board and replace it with the

low-profile bracket.

Chapter 2 Connect to a Computer

4. Locate an available F_USB connector and carefully plug the Bluetooth USB

cable into it.

USB

Note:

If the Bluetooth USB cable is not correctly connected to the motherboard, Bluetooth function won’t work

even after driver installation.

5. Install the antennas on the magnetized antenna base, then connect the base

to the adapter.

Tip:

To maximize performance, avoid physical obstructions in the path between your antennas and router.

6. Replace the case panel, plug in the power cable and turn on your computer.

After connecting your adapter to the computer, follow the instructions in the

next chapter to install Wi-Fi and Bluetooth drivers.

Chapter 3

Use Your Adapter

This chapter introduces how to install or uninstall your adapter’s Wi-Fi and

Bluetooth drivers, connect to a wireless network, and pair with a Bluetooth

device on Windows 10 (64 bit) system.

This chapter includes the following sections:

• Install Drivers

• Join a Wireless Network

• Pair with Bluetooth Devices

• Uninstall Drivers

Chapter 3 Use Your Adapter

3. 1. Install Drivers

1. Insert the CD and run the Autorun.exe.

Note: You can also check the new release and download the driver at

https://www.tp-link.com/support/download/

2. Install the Wi-Fi and Bluetooth drivers.

Note: DO NOT install the Bluetooth and Wi-Fi drivers simultaneously. If one driver is being installed,

please wait until it is finished, then try installing the other again.

• Wi-Fi: Click and follow the on-screen instructions to complete the Wi-Fi

installation.

• Bluetooth: Click and follow the on-screen instructions to complete the

Bluetooth installation.

Chapter 3 Use Your Adapter

3. 2. Join a Wireless Network

1. Click the icon ( Wireless Network ) on the taskbar.

2. Select your Wi-Fi network, click Connect, and enter the password when

prompted.

Connect

Secured

TP-Link_XXXX

Network settings

3. 3. Pair with Bluetooth Devices

1. Right click the (Bluetooth) icon on the taskbar.

Note: If it’s not displayed, refer to Troubleshooting-T4.

2. Select Add a Bluetooth Device to scan for available devices.

3. Select your Bluetooth device from the list and follow the on-screen

instructions to complete pairing.

Note: Make sure your device’s Bluetooth is enabled and discoverable.

3. 4. Uninstall Drivers

• Uninstall Wi-Fi driver

Go to Start > Apps, find the Wi-Fi driver Inter® PROSet/Wireless Software. Click

on it and select Uninstall, then follow the on-screen instructions to complete

the uninstallation.

• Uninstall Bluetooth driver

Go to Start > Apps, find the

Bluetooth

driver Inter(R) Wireless Bluetooth(R). Click

on it and select Uninstall, then follow the on-screen instructions to complete

the uninstallation.

Appendix: Troubleshooting

T1. What should I do if the adapter is not detected?

• Make sure the adapter is securely located in the appropriate PCI-E X1 slot.

• Make sure you meet the system requirements for the adapter. The current version of

Archer TX3000E only supports Windows 10 (64bit).

• Make sure you use the latest driver for your specific adapter. The latest drivers can be

found at the product’s Support page at https://www.tp-link.com.

• Try restarting the computer or try the adapter on a different computer.

T2. How to check if I have installed the drivers successfully or not?

Check your taskbar if there are Wi-Fi and Bluetooth icons.

• If you can see the icon ( Wireless Network ) on the taskbar, you have already

installed the Wi-Fi driver successfully.

• If you can see the (Bluetooth) icon on the taskbar, you have already installed the

Bluetooth driver successfully.

T3. What should I do if can’t connect to the Wi-Fi after installing the

driver?

• Refer to T2 to check if you have installed the driver for your adapter successfully .

• Disable the antivirus software and firewall, then try again.

• Make sure the adapter is securely located in the appropriate PCI-E X1 slot.

• Try a different PCI-E X1 slot on the computer.

• Restart your computer and try again.

• Reinstall the driver and try again.

T4. What should I do if the Bluetooth icon doesn’t appear?

• Make sure you have turned on the Bluetooth in your Windows settings. To enable

Bluetooth, go to Start > Settings > Devices > Bluetooth & other devices and turn on

Bluetooth.

• Make sure there are no other Bluetooth devices on the computer. If there are, disable

all existing Bluetooth devices in Device Manager, then reinstall the adapter and try

again.

Tip: To go to Device Manager: Right-click My Computer or This PC, select Manage, go to Device Manager

and disable all existing Bluetooth devices.

T5. How to find the hardware version of the adapter?

• The hardware version printed on the product label on the package or the adapter.

There is a character string “Ver:X.Y” (for example, Ver:1.0) in the Serial Number field, and

the number X is the hardware version of the adapter.

For more detailed instructions:

• Can’t find the hardware version of the adapter: https://www.tp-link.com/faq-46.html

• Can’t find or connect to the wireless networks: https://www.tp-link.com/faq-2253.html

• Can’t install the driver: https://www.tp-link.com/faq-2252.html

Specifications are subject to change without notice. is a registered

trademark of TP-Link Technologies Co., Ltd. Other brands and product names

are trademarks or registered trademarks of their respective holders.

No part of the specifications may be reproduced in any form or by any means or

used to make any derivative such as translation, transformation, or adaptation

FCC STATEMENT

Product Name: AX3000 Wi-Fi 6 Bluetooth 5.0 PCIe Adapter

Model Number: Archer TX3000E

Responsible party:

TP-Link USA Corporation, d/b/a TP-Link North America, Inc.

Address: 145 South State College Blvd. Suite 400, Brea, CA 92821

Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6803

E-mail: [email protected]om

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1 ) This device may not cause harmful interference.

2 ) This device must accept any interference received, including interference

that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference

caused by unauthorized modifications to this equipment. Such modifications

could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits set forth for an

uncontrolled environment. This device and its antenna must not be co-located

or operating in conjunction with any other antenna or transmitter.

“To comply with FCC RF exposure compliance requirements, this grant is

applicable to only Mobile Configurations. The antennas used for this transmitter

must be installed to provide a separation distance of at least 20 cm from all

persons and must not be co-located or operating in conjunction with any other

antenna or transmitter.”

We, TP-Link USA Corporation, has determined that the equipment shown as

above has been shown to comply with the applicable technical standards, FCC

part 15. There is no unauthorized change is made in the equipment and the

equipment is properly maintained and operated.

Issue Date: 2019-09-24

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause

radio interference, in which case the user may be required to take adequate

measures.

OPERATING FREQUENCY(the maximum transmitted power)

2400MHz—2483.5MHz(20dBm)

5150MHz—5250MHz(23dBm)

5250MHz—5350MHz(23dBm)

5470MHz—5725MHz(23dBm)

EU declaration of conformity

TP-Link hereby declares that the device is in compliance with the essential

requirements and other relevant provisions of directives 2014/53/EU, 2011/65/

EU and (EU)2015/863.

The original EU declaration of conformity may be found at

https://www.tp-link.com/en/ce

RF Exposure Information

This device meets the EU requirements (2014/53/EU Article 3.1a) on the

limitation of exposure of the general public to electromagnetic fields by way of

health protection.

The device complies with RF specifications when the device used at 20 cm from

your body.

Attention: This device may only be used indoors in all EU member states and

EFTA countries.

AT BE BG CH CY CZ DE DK

EE EL ES FI FR HR HU IE

IS IT LI LT LU LV MT NL

NO PL PT RO SE SI SK UK

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with

Innovation, Science and Economic Development Canada’s licence-exempt

RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may

cause undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est

conforme aux CNR d’Innovation, Sciences et Développement économique

Canada applicables aux appareils radio exempts de licence. L’exploitation est

autorisée aux deux conditions suivantes :

1) L’appareil ne doit pas produire de brouillage;

2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d’en compromettre le fonctionnement.

This radio transmitter (IC: 1000M-AX200NG/ Model: Archer TX3000E) has been

approved by Industry Canada to operate with the antenna types listed below

with the maximum permissible gain indicated. Antenna types not included in this

list below, having a gain greater than the maximum gain indicated for that type,

are strictly prohibited for use with this device.

Le présent émetteur radio (IC: 1000M-AX200NG/ Model: Archer TX3000E) a

été approuvé par Industrie Canada pour fonctionner avec les types d’antenne

énumérés ci-dessous et ayant un gain admissible maximal. Les types d’antenne

non inclus dans cette liste ci-dessous et dont le gain est supérieur au gain

maximal indiqué, sont strictement interdits pour l’exploitation de l’émetteur.

Antenna Two High-Gain Dual Band Antennas

Caution:

1 ) The device for operation in the band 5150–5250 MHz is only for indoor

use to reduce the potential for harmful interference to co-channel mobile

satellite systems;

2 ) For devices with detachable antenna(s), the maximum antenna gain permitted

for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such

that the equipment still complies with the e.i.r.p. limit;

3 ) For devices with detachable antenna(s), the maximum antenna gain permitted

for devices in the band 5725-5850 MHz shall be such that the equipment still

complies with the e.i.r.p. limits specified for point-to-point and non-point-to-

point operation as appropriate; and

DFS (Dynamic Frequency Selection) products that operate in the bands 5250-

5350 MHz, 5470-5600MHz, and 5650-5725MHz.

Avertissement:

1 ) Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé

uniquement pour une utilisation à l’intérieur afin de réduire les risques de

brouillage préjudiciable aux systèmes de satellites mobiles utilisant les

mêmes canaux;

2 ) Le gain maximal d’antenne permis pour les dispositifs avec antenne(s)

amovible(s) utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se

conformer à la limitation P.I.R.E.;

3 ) Le gain maximal d’antenne permis pour les dispositifs avec antenne(s)

amovible(s) utilisant la bande 5725-5850 MHz doit se conformer à la limitation

P.I.R.E spécifiée pour l’exploitation point à point et non point à point, selon

le cas.

Les produits utilisant la technique d’atténuation DFS (sélection dynamique des

fréquences) sur les bandes 5250- 5350 MHz, 5470-5600MHz et 5650-5725MHz.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated

with minimum distance 20cm between the radiator & your body.

Déclaration d’exposition aux radiations:

Cet équipement est conforme aux limites d’exposition aux rayonnements IC

établies pour un environnement non contrôlé. Cet équipement doit être installé

et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement

et votre corps.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

Korea Warning Statements

당해 무선설비는 운용중 전파혼신 가능성이 있음.

NCC Notice

注意！

依據低功率電波輻射性電機管理辦法

第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均

不得擅自變更頻率、加大功率或變更原設計之特性或功能。

第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干

擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依

電信規定作業之無線電信。低功率射頻電機需忍受合法通信或工業、科學以及醫

療用電波輻射性電機設備之干擾。

4.7.9.1 應避免影響附近雷達系統之操作。

4.7.9.2 高增益指向性天線只得應用於固定式點對點系統。

BSMI Notice

安全諮詢及注意事項

•請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。

•清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清

潔。

•注意防潮，請勿將水或其他液體潑灑到本產品上。

•插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆

蓋開口。

•請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉

位置中。

•請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此

項工作。

限用物質含有情況標示聲明書

產品元件名稱

限用物質及其化學符號

鉛

鎘

汞

六價鉻

CrVI

多溴聯苯

PBB

多溴二苯醚

PBDE

PCB ○ ○ ○ ○ ○ ○

備考1. “超出0.1 wt %” 及 “超出0.01 wt %” 系指限用物質之百分比含量超出百分比含量基準值。

備考2. “○”系指該項限用物質之百分比含量未超出百分比含量基準值。

Продукт сертифіковано згідно с правилами системи УкрСЕПРО

на відповідність вимогам нормативних документів та вимогам, що

передбачені чинними законодавчими актами України.

Safety Information

• Keep the device away from water, fire, humidity or hot environments.

• Do not attempt to disassemble, repair, or modify the device

• Do not use the device where wireless devices are not allowed.

La page est en cours de chargement...

TP-LINK TX3000E AX3000 Wi-Fi 6 Bluetooth 5.0 PCIe Adapter Mode d'emploi

Marque: TP-LINK

Modèle: TX3000E AX3000 Wi-Fi 6 Bluetooth 5.0 PCIe Adapter

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: TP-LINK TX3000E AX3000 Wi-Fi 6 Bluetooth 5.0 PCIe Adapter User guide

TP-LINK TX3000E AX3000 Wi-Fi 6 Bluetooth 5.0 PCIe Adapter Mode d'emploi

TP-LINK TX3000E AX3000 Wi-Fi 6 Bluetooth 5.0 PCIe Adapter Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents