Aeg-Electrolux F45010M0 Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur
FAVORIT 45010
EN
DISHWASHER USER MANUAL 2
FR
LAVE-VAISSELLE NOTICE D'UTILISATION 27
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have
created it to give you impeccable performance for many
years, with innovative technologies that help make life
simpler – features you might not find on ordinary
appliances. Please spend a few minutes reading to get
the very best from it.
ACCESSORIES AND CONSUMABLES
In the AEG webshop, you’ll find everything you need to
keep all your AEG appliances looking spotless and
working perfectly. Along with a wide range of
accessories designed and built to the high quality
standards you would expect, from specialist cookware
to cutlery baskets, from bottle holders to delicate
laundry bags…
Visit the webshop at:
www.aeg-electrolux.com/shop
2
CONTENTS
4 Safety information
7 Product description
8 Control panel
10 Use of the appliance
10 Setting the water softener
12 Use of dishwasher salt
12 Use of detergent and rinse aid
13 Multitab function
14 Loading cutlery and dishes
17 Washing programmes
18 Select and start a washing
programme
20 Care and cleaning
21 What to do if…
24 Technical data
24 Environment concerns
25 Installation
The following symbols are used in this
user manual:
Important information concerning
your personal safety and information
on how to avoid damaging the
appliance.
General information and tips
Environmental information
Subject to change without notice
Contents
3
SAFETY INFORMATION
Before the installation and use, read this manual carefully:
For your safety and the safety of your property.
To help the environment.
For the correct operation of the appliance.
Always keep these instructions with the appliance also if you move or give it to a differ-
ent person.
The manufacturer is not responsible if an incorrect installation and use causes damage.
Children and vulnerable persons safety
Do not let persons, children included, with reduced physical sensory, reduced mental
functions or lack of experience and knowledge to use the appliance. They must have
supervision or instruction for the operation of the appliance by a person who is respon-
sible for their safety.
Keep all packaging away from children. There is the risk of suffocation or injury.
Keep all detergents in a safe area. Do not let the children touch the detergents.
Keep children and pets away from the appliance when the door is open.
General safety
Do not change the specifications of this appliance. There is the risk of injury and dam-
age to the appliance.
Obey the safety instructions from the detergent manufacturer to prevent burns to
eyes, mouth and throat.
Do not drink the water from the appliance. Particles of detergent can stay in your ap-
pliance.
Do not keep the appliance door open without supervision. This to prevent injury and
to fall on an open door.
Do not sit or stand on the open door.
Use
The appliance is only for domestic use. Do not use the appliance for other uses to pre-
vent injury to persons and damage to property.
Only use the appliance to clean accessories that are applicable for dishwashers.
Do not put flammable products or items that are wet with flammable products in,
near or on the appliance. Risk of explosion or fire.
Put the knives and all items with sharp points in the cutlery basket with their points
down. If not, put in a horizontal position in the upper basket or in the knife basket.
(Not all models have the knife basket).
Use only specified products for dishwashers (detergent, salt, rinse aid).
Types of salt that are not specified for dishwashers can cause damage to the water
softener.
Fill the appliance with salt before you start a washing programme. Remaining salt in
the appliance can cause corrosion or make a hole in the bottom of the appliance.
4
Safety information
Do not fill the rinse aid dispenser with other products than the rinse aid, (dishwasher
cleaning agent, liquid detergent). This can cause damage to the appliance.
Make sure that the spray arms can move freely before you start a washing programme.
The appliance can release hot steam if you open the door while a washing programme
operates. There is a risk of skin burns.
Do not remove the dishes from the appliance until the washing programme is completed.
Care and cleaning
Before you clean the appliance, deactivate it and disconnect the mains plug from the
mains socket.
Do not use flammable products or products that can cause corrosion.
Do not use the appliance without the filters. Make sure that the installation of the
filters is correct. An incorrect installation causes unsatisfactory washing results and
damage to the appliance.
Do not use spray water or steam to clean the appliance. Risk of electrical shock and
damage to the appliance.
Installation
Make sure that the appliance is not damaged. Do not install or connect a damaged
appliance, contact the supplier.
Remove all packaging before you install and use the appliance.
Only a qualified person must do the electrical connection, the plumbing and the instal-
lation of the appliance. This to prevent the risks of structural damage or injury.
Make sure that the mains plug is disconnected from the mains socket during installation.
Do not drill into the sides of the appliance to prevent damage to hydraulic compo-
nents and electrical components.
Frost precautions
Do not install the appliance where the temperature is less than 0 °C.
The manufacturer is not responsible for frost damage.
Water connection
Use new hoses to connect the appliance to the water supply. Do not use used hoses.
Do not connect the appliance to new pipes or pipes not used for a long time. Let the
water flow for some minutes, then connect the inlet hose.
Make sure not to squash or cause damage to the water hoses when you install the
appliance.
Make sure that the water couplings are tight to prevent a water leakage.
The first time you use the appliance, make sure that the hoses do not have water leaks.
The water inlet hose has a safety valve and a double sheath with an inner mains cable.
There is pressure in the water inlet hose only when the water flows. If there is a leak in
the water inlet hose, the safety valve interrupts the flow of water.
Be careful when you connect the water inlet hose:
Do not put the water inlet hose or the safety valve in water.
Safety information
5
If the water inlet hose or the safety valve are damaged, immediately disconnect
the mains plug from the mains socket.
Contact the service centre to replace the water inlet hose with safety valve.
WARNING!
Dangerous voltage.
Electrical connection
The appliance must be earthed.
Make sure that the electrical information on the rating plate agrees with the power
supply.
Always use a correctly installed shockproof socket.
Do not use multiple plugs and extension cables. There is a risk of fire.
Do not replace or change the mains cable. Contact the service centre.
Make sure not to squash or cause damage to the mains plug and cable behind the
appliance.
Make sure that there is access to the mains plug after the installation.
Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
Service centre
Only a qualified person can repair or work on the appliance. Contact the service centre.
Use only original spare parts.
To discard the appliance
To prevent the risk of injury or damage:
Disconnect the mains plug from the mains socket.
Cut off the mains cable and discard it.
Remove the door catch. This prevents children or pets to be closed in the appliance.
There is a risk of suffocation.
Discard the appliance at the local waste disposal centre.
6
Safety information
WARNING!
The dishwasher detergents are dangerous and can cause corrosion !
If an accident occurs with these detergents, contact immediately a physician.
If the detergent gets into the mouth, contact immediately a physician.
If the detergent gets into the eyes, contact immediately a physician and clean the eyes
with water.
Keep dishwasher detergents in a safe area and out of children touch.
Do not keep the appliance door open when there is detergent in the detergent dispenser.
Fill the detergent dispenser only before you start a washing programme.
PRODUCT DESCRIPTION
1 Upper basket
2 Water hardness dial
3 Salt container
4 Detergent dispenser
5 Rinse aid dispenser
6 Rating plate
7 Filters
8 Lower spray arm
9 Upper spray arm
10 Worktop
Product description
7
CONTROL PANEL
1 2 3 4
7 568
1 Off position
2 Programme marker
3 Indicators
4 Display
5 Start button
6 Delay button
7 Multitab button
8 Programme knob
Indicators
The indicator comes on when the washing and rinsing phases operate.
The indicator comes on when the dry phase operates.
The indicator comes on when it is necessary to fill the rinse aid dispenser.
1)
The indicator comes on when it is necessary to fill the salt container.
1)
After you fill the container, the salt indicator can stay on for some hours. This
does not have an unwanted effect on the operation of the appliance.
The indicator comes on when you activate the multitab function.
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a
washing programme operates.
Display
The display shows:
The electronic adjustment of the level of the water softener
The activation and deactivation of the rinse aid dispenser (only with the multitab func-
tion on)
The time of the washing programme
The remaining time to the end of the washing programme
The end of a washing programme (the display shows a zero)
The time of the delay start
The alarm codes.
8
Control panel
Start button
Press this button to start:
The washing programme
The countdown of the delay start.
Delay button
Press this button again and again to delay the start of the washing programme from 1 to
19 hours.
Multitab button
Press this button to activate or deactivate the multitab function (refer to 'Multitab func-
tion').
Programme knob
With the programme knob you can:
Activate and deactivate the appliance
Set a washing programme
Adjust electronically the level of the water softener (refer to 'Setting the water softener')
Activate or deactivate the rinse aid dispenser (only with the multitab function on).
To activate the appliance and set a washing programme
Turn the programme knob until the programme marker is aligned with one of the wash-
ing programmes on the control panel.
If the programme marker is aligned with a washing programme, the digital display
shows the programme time.
If the programme marker is not aligned with a washing programme, the display shows
two horizontal status bar.
To deactivate the appliance
Turn the programme knob until the programme marker is aligned with the off position.
Setting mode
The appliance must be in setting mode for these operations:
To set and start a washing programme
To set and start a delay start
To adjust electronically the level of the water softener
To deactivate or activate the rinse aid dispenser (only with the multitab function on).
Activate the appliance. The appliance is in setting mode when:
The programme time flashes in the display
One or more phase indicator lights come on.
Activate the appliance. The appliance is not in setting mode when:
The washing programme time or the delay start time do not flash in the display
One or more phase indicator lights come on.
Control panel
9
It is necessary to cancel the programme or the delay start to go back to the setting
mode (refer to 'Select and start a washing programme').
USE OF THE APPLIANCE
1. Be sure that the set level of the water softener agrees with the water hardness in
your area. If not, adjust the water softener.
2. Fill the salt container with dishwasher salt.
3. Fill the rinse aid dispenser with rinse aid.
4. Load cutlery and dishes into the appliance.
5. Set the correct washing programme for the type of load and soil.
6. Fill the detergent dispenser with the correct quantity of detergent.
7. Start the washing programme.
If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function
(refer to 'Multitab function').
SETTING THE WATER SOFTENER
The water softener removes minerals and salts from the water supply. These minerals and
salts can cause damage to the appliance.
Adjust the level of the water softener if this does not agree with the water hardness in
your area.
Contact your local water authority to know the water hardness in your area.
Water hardness
Water hardness ad-
justment
German degrees
(°dH)
French degrees
(TH°)
mmol/l Clarke de-
grees
manually elec-
troni-
cally
51 - 70 91 - 125 9,1 - 12,5 64 - 88
2
1)
10
43 - 50 76 - 90 7,6 - 9,0 53 - 63
2
1)
9
37 - 42 65 - 75 6,5 - 7,5 46 - 52
2
1)
8
29 - 36 51 - 64 5,1 - 6,4 36 - 45
2
1)
7
23 - 28 40 - 50 4,0 - 5,0 28 - 35
2
1)
6
19 - 22 33 - 39 3,3 - 3,9 23 - 27
2
1)
5
1)
15 - 18 26 - 32 2,6 - 3,2 18 - 22 1 4
11 - 14 19 - 25 1,9 - 2,5 13 - 17 1 3
4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2
10
Use of the appliance
Water hardness
Water hardness ad-
justment
German degrees
(°dH)
French degrees
(TH°)
mmol/l Clarke de-
grees
manually elec-
troni-
cally
< 4 < 7 < 0,7 < 5
1
2)
1
2)
1) Factory position.
2) Do not use salt at this level.
You must adjust the water softener manually and electronically.
Manual adjustment
Turn the water hardness dial to the position 1 or
2 (refer to the table).
Electronic adjustment
Make sure that the appliance is deactivated.
1. Press and hold the Multitab button .
2. Turn the programme knob counterclockwise until the programme marker is aligned
with the first washing programme on the control panel.
3. Release the Multitab button when the display shows the set level of the water soften-
er (example: the display shows
= level 5.
4. Press the Multitab button again and again until the display shows the new level.
5. Deactivate the appliance to confirm the adjustment.
If the water softener is set electronically to the level 1, the salt indicator light stays off.
Setting the water softener
11
USE OF DISHWASHER SALT
How to fill the salt container
1. Turn the cap counterclockwise and open
the salt container.
2. Fill the salt container with 1 litre of wa-
ter (only for the first time you fill with
salt).
3. Use the funnel to fill the salt container
with salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
It is correct that water comes out from the salt container when you fill it with salt.
USE OF DETERGENT AND RINSE AID
8
2
4
5
6
1
7
3
Use of detergent
To help the environment, do not use more than the correct quantity of detergent.
Follow the detergent manufacturer recommendations on the detergent packaging.
Do these steps to fill the detergent dispenser:
1.
Press the release button
2
to open the lid
8
of the detergent dispenser.
2.
Put the detergent in the dispenser
3
.
3. If the washing programme has a prewash phase, put a small quantity of detergent in
the prewash detergent compartment
1
.
12
Use of dishwasher salt
4.
If you use the detergent tablets, put the tablet in the detergent dispenser
3
.
5. Close the detergent dispenser. Press the lid until it locks into position.
Different brands of detergent dissolve in different times. Some detergent tablets do not
have the best cleaning results during short washing programmes. Use long washing pro-
grammes when you use the detergent tablets to fully remove the detergent.
Use of rinse aid
Rinse aid makes it possible to dry the dishes without streaks and stains.
The rinse aid dispenser automatically adds rinse aid during the last rinsing phase.
Do these steps to fill the rinse aid dispenser:
1.
Press the release button
5
to open the lid
7
of the rinse aid dispenser.
2.
Fill the rinse aid dispenser
4
with rinse aid. The mark 'max' shows the maximum level.
3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam dur-
ing the washing programme.
4. Close the rinse aid dispenser. Press the lid until it locks into position.
Adjust the rinse aid dosage
Factory set: position 4.
You can set the rinse aid dosage between position 1 (lowest dosage) and position 6 (high-
est dosage).
Turn the rinse aid selector
6
to increase or decrease the dosage.
MULTITAB FUNCTION
The multitab function is for combi detergent tablets.
These tablets contain agents as detergent, rinse aid and dishwasher salt. Some types of
tablets can contain other agents.
Be sure that these tablets are applicable for the water hardness in your area (refer to the
instructions on the packaging of the products).
The multitab function deactivates the flow of rinse aid and salt.
The multitab function deactivates the indicators of salt and rinse aid.
The programme duration can increase if you use the multitab function.
Activate the multitab function before the start of a washing programme. You cannot ac-
tivate the function when a washing programme operates.
To activate the multitab function
Press the Multitab button, the multitab indicator comes on. The function is activated.
When you set the multitab function, it stays on until you deactivate it.
To deactivate the multitab function and use separately detergent, salt and rinse aid
1. Press the Multitab button, the multitab indicator goes off. The function is deactivated.
2. Fill the salt container and the rinse aid dispenser.
3. Adjust the water hardness to the highest level.
Multitab function
13
4. Start a washing programme without dishes.
5. Adjust the water softener to the water hardness in your area.
6. Adjust the quantity of rinse aid.
LOADING CUTLERY AND DISHES
Hints and tips
Do not put in the appliance items that can absorb water (sponges, household cloths).
Remove the remaining food from the items.
Make soft the remaining burned food on the items.
Put hollow items (cups, glasses and pans) with the opening down.
Make sure that water does not collect in containers or in bowls.
Make sure that cutlery and dishes do not bond together.
Make sure that the glasses do not touch other glasses.
Put small items in the cutlery basket.
Mix the spoons with other cutlery to prevent them to bond together.
When you put the items in the baskets, make sure that the water can touch all surfaces.
Put light items in the upper basket. Make sure that the items do not move.
Water droplets can collect on plastic items and non-stick pans.
Lower basket
Put the saucepans, lids, plates, salad bowls and
cutlery in the lower basket. Put the service
dishes and large lids around the edge of the basket.
14
Loading cutlery and dishes
The rows of prongs in the lower basket can be
flat to load pots, pans and bowls.
The cutlery basket
Put the forks and spoons with the handles down.
Put the knives with the handles up.
Mix the spoons with other cutlery to prevent
them to bond together.
Use the cutlery grid. If the dimensions of the cut-
lery prevent use of the cutlery grid, you can easi-
ly remove it.
Loading cutlery and dishes
15
Upper basket
The upper basket is for plates (maximum 24 cm
in diameter), saucers, salad bowls, cups, glasses,
pots and lids. Arrange the items to let water
touch all surfaces.
Prevent to put plates in the first three sectors in
the front part of the basket. Make sure the
plates tilt forward.
Put the glasses with long stems in the cup racks
with the stems up. For longer items, fold the cup
racks up.
Adjustment of the height of the upper basket
You can put the upper basket in two positions to increase the load flexibility.
Maximum height of the dishes in:
the upper basket the lower basket
Higher position 20 cm 31 cm
Lower position 24 cm 27 cm
Do these steps to move the upper basket to the higher position:
16
Loading cutlery and dishes
1. Pull the basket out until it stops.
2. Carefully lift the two sides until the mech-
anism is engaged and the basket is stable.
Do these steps to move the upper basket to
the lower position:
1. Pull the basket out until it stops.
2. Carefully lift up the two sides.
3. Hold the mechanism and let it fall back
down slowly.
CAUTION!
Do not lift or lower the basket on one side
only.
If the basket is in the upper position, do
not put cups on the cup racks.
WASHING PROGRAMMES
Programme Type of soil Type of load Programme description
Heavy soil Crockery, cutlery,
pots and pans
Prewash
Wash 70 °C
Rinses
Dry
1)
All Crockery, cutlery,
pots and pans
Prewash
Wash 45 °C or 70 °C
Rinses
Dry
2)
Fresh soil Crockery and cutlery Wash 60°C
Rinse
Use this programme to quickly rinse the
dishes. This prevents the remaining food
to bond on the dishes and bad odours
to come out from the appliance.
Do not use detergent with this pro-
gramme
Rinse
3)
Normal soil Crockery and cutlery Prewash
Wash 50 °C
Rinses
Dry
1) The appliance senses the type of soil and the quantity of items in the baskets. It automatically adjusts the
temperature and quantity of the water, the energy consumption and the programme time.
2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
3) This is the standard programme for test institutes. With this programme you have the most efficient use of
water and energy consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for
test information.
Washing programmes
17
Consumption values
Programme
1)
Energy (kWh) Water (litre)
1,5-1,7 15-17
1,1-1,7 11-22
0,9 9
0,1 4
1,0-1,1 13-15
1) The display shows the programme time.
The water pressure and temperature, the variations of the mains supply and the quantity
of dishes can change the consumption values.
SELECT AND START A WASHING PROGRAMME
Start the washing programme without delay start
1. Close the appliance door.
2. Set the washing programme (make sure that the appliance is in setting mode).
The programme time flashes in the display
The phase indicators of the set washing programme come on.
3. Press the Start button, the washing programme starts automatically.
The phase indicators go off but the indicator of the phase in operation stays on.
Start the washing programme with delay start
1. Close the appliance door.
2. Set the washing programme (make sure that the appliance is in setting mode).
3. Press the Delay button again and again until the display shows the time of the delay
start.
The time of the delay start flashes in the display.
4. Press the Start button, the countdown starts automatically.
The delay start time flashes no more in the display
The phase indicators of the set washing programme go off.
5. When the countdown is completed, the washing programme starts automatically.
The indicator of the phase in operation comes on.
The opening of the appliance door stops the countdown. When you close the door, the
countdown continues from the point of interruption.
18
Select and start a washing programme
Cancel the delay start
If you did not press the Start button, and the countdown is not in operation
1. Press the Delay button again and again until:
The display shows the time of the set washing programme
The phase indicators come on.
2. Press the Start button to start the washing programme.
If you did press the Start button, and the countdown is in operation
1. Press the Delay button again and again until:
The display shows the time of the set washing programme
The phase indicators come on.
The washing programme starts automatically.
Interruption of a washing programme
Open the appliance door.
The washing programme stops.
Close the appliance door.
The washing programme continues from the point of interruption.
Cancel the washing programme
If the washing programme has not started, you can change the selection.
To change the selection when the washing programme operates, it is necessary to cancel
the programme.
At the same time press and hold the buttons Multitab and Delay until:
The time of the last set washing programme flashes in the display
The indicators of the phases of the washing programme come on.
Make sure that there is detergent in the detergent dispenser before you start a new wash-
ing programme.
End of the washing programme
The display shows a zero and the phase indicators are off when the washing programme
is completed.
1. Deactivate the appliance.
2. Open the appliance door.
3. For better drying results, keep the door ajar for some minutes.
If you do not deactivate the appliance at the end of the washing programme, the appli-
ance stays on standby.
To decrease energy consumption during the standby, after three minutes from the end
of the washing programme:
All indicators go off
The display shows one horizontal bar.
Press one of the buttons, the display and the indicators come on again.
Select and start a washing programme
19
Remove the items from the baskets
Let the dishes become cold before you remove them from the appliance. Hot dishes
can be easily damaged.
First remove the items from the lower basket, then from the upper basket.
There can be water on the sides and on the door of the appliance. Stainless steel be-
comes cool more quickly than the dishes.
CARE AND CLEANING
To remove and clean the filters
Dirty filters decrease the washing results. Make a check at intervals and if necessary,
clean them.
The appliance has three filters:
Coarse filter (A)
Microfilter (B)
Flat filter (C).
1. To unlock the filters (A) and (B), turn the
handle on the microfilter (B) approxi-
mately 1/4 counterclockwise and remove.
2. Hold the coarse filter (A) by the handle
and remove it from the microfilter (B).
A
B
C
A
B
C
20
Care and cleaning
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Aeg-Electrolux F45010M0 Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur

dans d''autres langues