LG SH7 Le manuel du propriétaire
- Catégorie
- Haut-parleurs de la barre de son
- Taper
- Le manuel du propriétaire
SIMPLE MANUAL
SMART Hi-Fi
AUDIO
Please read this manual carefully before operating your set and
retain it for future reference.
To view the instructions of advanced features, visit
http://www.lg.com and then download Owner’s Manual.
Some of the content in this manual may differ from your unit.
MODEL
SH7
*MFL68899982*
www.lg.com
SH7
Wireless Multi-room Sound Bar
ENGLISH
1 Getting Started
Getting Started 3
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufcient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, shall be placed on the
apparatus.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: No naked ame sources, such as lighted
candles, should be placed on the apparatus.
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device.
In case of an emergency, the Power Plug must remain
readily accessible.
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery from the
equipment: Remove the old battery or battery pack,
follow the steps in reverse order than the assembly.
To prevent contamination of the environment and
bring on possible threat to human and animal health,
the old battery or the battery put it in the appropriate
container at designated collection points. Do not
dispose of batteries or battery together with other
waste. It is recommended that you use local, free
reimbursement systems batteries and accumulators.
The battery should not be exposed to excessive heat
such as sunshine, re or the like.
NOTICE: For safety marking information including
product identication and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
CAUTION
Only use the AC adapter supplied with this device.
Do not use a power supply from another device or
another manufacturer. Using any other power cable
or power supply may cause damage to the device and
void your warranty.
Getting Started4
Getting Started
1
IMPORTANT SAFETY
INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Table of Contents 5
1
2
3
4
5
6
1 Getting Started
3 Safety Information
4 – IMPORTANT SAFETY INSTRUCTIONS
6 Unpacking
6 – Wireless subwoofer connection
7 Front panel
7 Rear panel
8 Remote control
2 Connecting to your TV
9 Connecting to your TV
9 – 1. Optical connection
9 – 2. HDMI (ARC) connection
9 – 3. Wireless LG Sound Sync connection
3 Using Multi-Room
10 Multi-Room Network Setup
10 – Step 1. Home Network Requirement
11 – Step 2. Installing “Music Flow Player” App
and Media Server
12 – Step 3. Initial Multi-Room Setup
14 – Step 4. Add Speakers (Optional)
15 – Using the Bridge
16 Enjoying Multiple MUSIC flow Product
16 – 1. Home Cinema Mode (Surround Sound
Mode)
16 – 2. Grouping Mode
16 – 3. L/R Stereo Mode
4 Using External device
17 Using External device
17 – 1. HDMI Input connection
17 – 2. PORTABLE IN connection
17 – 3. BLUETOOTH® connection
5 Troubleshooting
18 Troubleshooting
6 Appendix
22 Mounting the main unit on a wall
23 About Status LED’s Condition
23 Specification
23 OPEN SOURCE SOFTWARE NOTICE
INFORMATION
Table of Contents
Some of the content in this manual may differ from Music Flow Player app depending on the application’s
version.
Getting Started6
Getting Started
1
Unpacking
Unit Remote Control
and Batteries
Cable Holder Subwoofer Adapter and
power cord
Simple Manual Optical cable Wall brackets
and screws
Wall bracket
install guide
LAN cable
y
When mounting this unit on a wall, refer to page 22.
y
Depending on the region, the supplied accessories may differ.
Wireless subwoofer connection
Subwoofer
1. Connect the power cord of the main unit and the wireless subwoofer to the outlet.
2. Turn them on and the wireless subwoofer will be automatically connected. When the connection is
completed, you can see the green LED on the subwoofer.
If you have trouble to connect the wireless subwoofer, refer to page 18.
Getting Started 7
Getting Started
1
A
LED indicator: Shows connection status.
(Page 23)
y
White (blinking): waiting for network
connection
y
White (staying on): network connection is
completed.
y
White (Dimmed): standby mode with network
connection.
y
Green (staying on): the rst group was set.
y
Red (staying on): standby mode without
network connection
B
Display window
C
Remote sensor
D
The buttons are located on the rear.
Front panel
A
1/!
(Standby/On)
F (Function): Selects the function and input
source. (OPTICAL / HDMI IN / WI-FI / BT READY /
LG TV / PORTABLE)
-
/
+ (Volume)
(Wi-Fi): Connects initial MUSICflow
product to your network wirelessly.
(Add): Adds the additional MUSICflow
product to your network.
(In case that one or more MUSICflow product is
connected.)
B
DC IN (AC adapter input)
C
OPTICAL IN connectors
D
PORTABLE IN connector
E
USB (Service only) : S/W download connector
F
HDMI OUT (TV ARC) : Connect to HDMI IN
(ARC) on TV.
G
HDMI IN
H
LAN port
Rear panel
HDMI OUT
(TV ARC)
HDMI IN
LAN
Getting Started8
Getting Started
1
Remote control
Battery Installation
Remove the battery cover on the rear of the remote
control, and insert the battery with
4
and
5
matched correctly.
• • • • • • • • • • • • • •
a
• • • • • • • • • • • • •
1
(Power) : Switches the unit ON or OFF (standby
mode).
F (Function): Selects the function and the input
source. (OPTICAL / HDMI IN / WI-FI / BT READY / LG
TV / PORTABLE)
SOUND EFFECT : Selects a sound effect mode.
(Mute) : Mutes the sound.
(Night mode) : Set Night mode to On to reduce
the sound intensity and improve neness and
softness.
: Adjusts sound level of Treble, Bass and Sub-
woofer.
+/- (VOL): Adjusts speaker volume.
• • • • • • • • • • • • • •
b
• • • • • • • • • • • • •
C/V
(Skip) : Skips Fast backward or Forward.
dM
(Play/Pause) : Starts playback or pauses
playback.
You can use these playback buttons after
play music by “Music Flow Player” App or PC
software.
,
Note
DRC : Turns on or off DRC function.
y
DRC (Dynamic Range Control) : Make the sound
clear when the volume is turned down (Dolby
Digital only).
REPEAT : Listen to your music repeatedly.
y
Press and hold REPEAT on the remote control
for about 3 seconds, you can see the connected
bluetooth device name on the bluetooth function.
AUTO VOL : Turns on or off the AUTO VOLUME
mode.
y
When the output sound is too loud or too low,
press this button on the remote control. So you
can enjoy the sound with appropriate levels.
AV SYNC : Synchronizes the audio and video.
y
When receiving audio signals from TV, sound and
images may not be matched. In the case, this
function can adjust the delay time.
y
Press AV SYNC then use
C/V
to control
the time which you can set at between 0 and 300
ms.
y
To control the TV remote control function, press
and hold AV SYNC on the remote control for
about 3 seconds.
SLEEP : Sets the system to turn off automatically at
a specied time.
AUTO POWER : Turns on or off AUTO POWER
function.
y
If your TV or an external device is connected to
Optical Input connector(s) on the unit and when
you turn on your TV or an external device, this unit
recognizes the input signal and selects the optical
function. You can hear the sound from your device.
y
To use the Auto display off function, press and
hold AUTO POWER on the remote control for
about 3 seconds.
2 Connecting to your TV
Connecting to your TV 9
Connecting to your TV
2
Connecting to your TV
Make one of the following connections, depending on the capabilities of your TV among Optical, HDMI or
Wireless connection.
1. Optical connection
1. Connect the OPTICAL IN jack on the unit to OPTICAL OUT jack on the TV using an OPTICAL cable.
2. Set up the sound output of TV to OPTICAL output. (For details, reference your TV user manual.)
Note: If your LG TV is supported LG Sound Sync (LG TV with the logo). Set up the sound output
of TV to LG Sound Sync (Optical). (For details, reference your TV user manual.)
3. Set the input source of this unit to OPTICAL using OPTICAL or FUNC button.
2. HDMI (ARC) connection
If you connect this unit to a TV that supports HDMI CEC and ARC (Audio Return Channel), you can enjoy the TV
audio through the speakers of this unit without connecting the optical cable.
1. Connect the HDMI OUT (TV ARC) jack on the unit to HDMI IN (ARC) jack on the TV using an HDMI cable
(Type A, High speed HDMI™ Cable with Ethernet).
TV : HDMI IN (ARC) Sound Bar : HDMI OUT (TV ARC)
HDMI OUT
(ARC)
IN
2. Set up the sound output of TV to HDMI (ARC). (For details, reference your TV user manual.)
3. ARC function is automatically selected when ARC signal comes in from TV, no matter what kind of the
function you are using.
3. Wireless LG Sound Sync connection
If you connect this unit to a TV that supports LG Sound Sync (LG TV with the logo), you can enjoy
the TV sound with wireless connection.
1. Turn on the unit and set the input source of this unit to LG TV function using FUNC button.
2. Set up the sound output of TV to LG Sound Sync (Wireless). (For details, reference your LG TV user manual.)
“PAIRED” appears on the display window for about 3 seconds and then you can see “LG TV” on the display
window if connecting normally between this unit and your TV.
About
You can control some functions of this unit by your TV’s remote control with LG Sound Sync. It is compatible with
the LG TV that is supported LG Sound Sync. Make sure of the LG Sound Sync logo on your TV.
3 Using Multi-Room
Using Multi-Room10
Using Multi-Room
3
Multi-Room Network Setup
Step 1. Home Network Requirement
a
b
c
d
a
Make sure that a wireless network environment using a router is installed at your home. The home router
should be connected to the internet.
b
Connect your smart device to your home network.
c
Connect the speaker to the power supply.
d
If you want to enjoy music on a media server (PC, Mac or Network Storage), connect the media server to
your home network.
.
Caution for Home Network Requirement
y
MUSIC ow system communicates over both 2.4 GHz and 5 GHz home network supporting 802.11b/g/n
wireless technology.
y
Wireless signal interference may lead to disconnection of network or stopping playback.
y
Depending on the speed of your network, playback of online contents may not work well.
y
Network connection may not be made with some routers (or modem) from certain internet communication
service providers. In such case, use a router purchased from the general market.
y
Because of a rewall on your PC, Music Flow PC Software may not work well. In this case, disable all your
rewalls and try to connect again. Refer to your rewall’s instruction or website.
y
The network drive cannot congure the shared folder setting.
Using Multi-Room 11
Using Multi-Room
3
Step 2. Installing “Music Flow Player” App and Media Server
Installing “Music Flow Player” App
Download “Music Flow Player” on the Apps Store or Google Play Store.
A B
OR
A
Type “Music Flow Player” in the search bar and tap “Search”.
B
Scan the QR code using the scanning application.
,
Note for “Music Flow Player” App
y
Depending on the device, “Music Flow Player” app may not work.
y
Music Flow Player app will be available in version of the software as follow;
Android O/S : Ver 4.0 (ICS) (or later)
iOS O/S : Ver 6.0 (or later)
Installing Media Server software on your PC or Mac
Media server software allows you to access audio les stored in media server (PC, Mac or Network storage) and
enjoy them on your speaker via home networking. On www.lg.com website, type model name in the search bar
and nd media server software on support tab.
y
Windows : Music Flow PC Software
y
Mac OS : Nero MediaHome 4 Essentials
,
Note for using Media Server
y
On your PC or Mac, you must share the folder contained Audio content to play them on MUSIC ow system.
y
On your NAS device, you also must change the settings of your NAS device to ensure that DLNA server is
enabled.
y
On your Firewall software, you may also need to change the settings of your rewall software to ensure that
Windows le sharing is not blocked.
Simple Connection (EZ Setup)
Preparation
y
For Simple Connection, Wi-Fi network condition is needed.
y
Make sure that the Bluetooth setting on your smart device in on.
y
Simple Connection is supported by Bluetooth Ver 4.0 (or higher).
For Simple Connection, follow the direction on the screen of “Music Flow Player” app.
Using Multi-Room12
Using Multi-Room
3
Step 3. Initial Multi-Room Setup
When installing the MUSIC ow product for the rst time, you can choose two types of connection as below.
Option 1. Wired connection (MUSIC flow Mesh Network Connection)
Connect one of MUSIC ow products (sound bar, speaker or bridge) to the home router using LAN cable.
Then you can connect the additional MUSIC ow products (Optional) to your home network wirelessly (MUSIC
ow Mesh Network). Refer to “Step 4. Add Speakers (Optional)” on page 14.
If you have a bridge
Bridge (Wired Connection)
à
Sound bar (Add speaker)
à
Other speakers (Add speaker)
If you do not have a bridge
Sound bar (Wired Connection)
à
Other speakers (Add speaker)
LAN Cable
Simple Setup Guide (Wired Connection)
1. Ensure that your smart device is connected to your Wi-Fi network.
2. Select the product you want to connect.
3. Launch Music Flow Player App and follow “Wired Connection” instructions on set-up wizard.
4. Connect LAN cable from router to any one of the MUSIC flow products (sound bar, speaker or bridge).
5. Power on the MUSIC flow product and wait until you see a white LED become solid.
6. If you install successfully, update speaker software to the latest:
[Home
à
Settings
à
Version Info.]
m Tip
Separated from the router’s Wi-Fi environment, composes wireless network among MUSIC ow products.
Using MUSIC ow mesh network, Wireless coverage is expanded, which offers stable music streaming service.
In the below case, MUSIC ow Mesh Network connection is recommended.
1. When the Wi-Fi coverage cannot reach whole house because home router performance is unstable.
(In case that your home router supports only 802.11 b/g 2.4 GHz.)
2. When you want to enjoy MUSIC flow system in stable wireless network environment.
3. When you want to use in below mode.
1) Multi-Room & Group-play Mode
2) Home Cinema Mode
Using Multi-Room 13
Using Multi-Room
3
Option 2. Wireless connection (Standard Wireless Connection)
MUSIC ow products offer music streaming service within the home router’s Wi-Fi coverage.
Connect one of the MUSIC ow products, (sound bar or speaker) to the home router wirelessly.
(Option)
Then you can connect any additional MUSIC ow products to your home Wi-Fi network wirelessly. Refer to
“Step 4. Add Speakers (Optional)” on page 14.
Wireless signal
Simple Setup Guide (Wireless Connection)
1. Ensure your smart device is connected to your Wi-Fi network.
2. Select the product you want to connect.
3. Launch Music Flow Player App and follow “Wireless Connection” instructions on set-up wizard.
4. Press (Wi-Fi Setup icon) button at the back or top of the MUSIC flow product (sound bar, speaker or
bridge).
5. Check if the network indicator LED is blinking in a white and red color.
6. Please input the password of Home Router for connecting the MUSIC flow product to home router.
If you have an iOS device, you must take the three steps below
6-1. Press home button of the iOS device and go to [Settings].
If you can select “MUSIC flow_Setup” in Wi-Fi settings. The App and MUSIC flow product will be
connected.
6-2. Move to the Music Flow Player App and input the password of the home router for connecting the MUSIC
flow product to home router.
6-3. Press the home button of the iOS device and go to [Settings].
Reconnect to your Home Wi-Fi network. And move to the Music Flow Player App again.
7. If the installation was successful, update speaker software to the latest:
[Home
à
Settings
à
Version Info.]
,
Note
y
If the “Wireless connection” conguration failed, your location may be too far from the router, it may not
connect. Place and use it at a location that is closer to router.
y
Music Flow PC Software installed on a desktop does not support wireless connection. In this case, use the
Music Flow Player on a smart device.
y
If the router’s performance is not good enough (ex. 802.11g 2.4GHz), sound may be broken in group play or
surround playback mode. In this case, connect the speaker in MUSIC flow Mesh Network.
Using Multi-Room14
Using Multi-Room
3
m Tip
Offers music streaming service in MUSIC ow system within home router’s Wi-Fi coverage.
In the below case, Standard wireless connection is recommended.
1. When all speakers are within the home router’s Wi-Fi coverage.
(If case that your home router supports 802.11n 2.4/5 GHz )
2. When the wired connection is unavailable between MUSIC ow products and home router.
3. When you want to use in below mode.
1) When you use single speaker MUSIC flow system.
2) Group-play in the Wi-Fi coverage of the home router
3) L/R stereo Mode in the Wi-Fi coverage of the home router
Step 4. Add Speakers (Optional)
If you connect the initial MUSIC ow product to your home network, you can connect additional MUSIC ow
products (sound bar, speaker or bridge) to your home network.
Simple Setup Guide (Add Speakers)
1. If you have additional speakers, power on the speaker.
2. Launch smart device or PC application and follow instructions on set-up wizard.
[Home
à
Add Speakers]
3. Press (ADD icon) button at the back or at the top of the MUSIC flow product (sound bar, speaker or
bridge) which you want to connect.
4. Check if network indicator LED is blinking in a red color.
5. If you install successfully, update speaker software to the latest:
[Home
à
Settings
à
Version Info.]
,
Note
If the “Add Speaker” conguration failed, your location may be too far from the router, it may not connect. Place
and use it at a location that is closer to router and each speaker.
Using Multi-Room 15
Using Multi-Room
3
,
Note for Multi-Room Setup
y
You can make all wireless/wired connection according to the location of the router. But we recommend that
you connect the rst speaker or bridge to the router using LAN cable and connect additional speakers for
network stability.
y
When the “Firmware update” pop-up appears on Music Flow Player App, touch to start updating.
y
If you connected a speaker with a LAN cable and installed additional speakers: If the speaker with frequent
sound breaking is not close enough with the cable connected speaker, install a Bridge or another speaker in
the middle location between the speaker connected with LAN cable and the speaker with sound breaking,
and try again.
y
Even if you connected speakers with MUSIC ow mesh network, music sound breaks by ambient signal
interference causing Wi-Fi network defect. In this case, you can try to change Mesh network channel of
MUSIC ow system at the [Settings
à
Advanced settings
à
Mesh Network Channel]
y
When making connection, “Mesh network composition” may appear and it takes about 30 seconds. This
message appears once in rst installation but may appear again when you change network environment.
Using the Bridge
1. Use as a root device (wired to the home router)
When your home router is located too far from any speaker location that is to be connected via wired mode:
a
According to “Simple Setup Guide (Wired Connection)”, connect the Bridge to your home router with LAN
cable.
b
According to “Simple Setup Guide (Add Speakers)“, add MUSIC flow products to your home network.
a
b
Bridge
2. Use as a wireless extender
When you want to expand MUSIC ow mesh network coverage:
Preparation: Initial MUSIC ow product is connected to your home router with LAN cable.
a
According to “Simple Setup Guide (Add Speakers)“, add the Bridge to your home network.
b
According to “Simple Setup Guide (Add Speakers)“, add MUSIC flow products to your home network.
a
b
Bridge
Using Multi-Room16
Using Multi-Room
3
Enjoying Multiple MUSIC flow Product
1. Home Cinema Mode (Surround Sound Mode)
Simply add a LG MUSIC ow sound bar to your network and synchronize it with your LG MUSIC ow speakers to
enjoy a home cinema system experience.
If you have a bridge
Bridge (Wired Connection)
à
Sound bar (Add speaker)
à
Other speakers (Add speaker)
If you do not have a bridge
Sound bar (Wired Connection)
à
Other speakers (Add speaker)
,
Note
Requirement
y
MUSICow Sound Bar x 1
y
MUSICow Speaker x 2
y
Network Bridge (optional)
2. Grouping Mode
Speakers placed in separate rooms can play the same music or different music based on your needs.
Synchronize your multi-room speakers together to play the same song in every room.
Requirement
y
More than 2 MUSICow
y
Network Bridge (optional)
3. L/R Stereo Mode
Set your speakers to stereo sound with Music Flow Player Apps to enjoy movies and your favourite tracks.
Requirement
y
MUSICow Speaker x 2
y
Network Bridge (optional)
4 Using External device
Using External device 17
Using External device
4
Using External device
1. HDMI Input connection
To the Blu-ray disc player,
DVD player, game console,
etc.
1. Connect HDMI IN jack on the unit to HDMI OUT jack on the audio & video device such as Blu-ray disc player,
DVD player, game console, etc.
2. Select the input source of this unit to HDMI IN using FUNC button.
2. PORTABLE IN connection
1. Connect any device which has portable out ( ) to the PORTABLE IN connector of the unit by using a 3.5
mm stereo cable.
2. Select the input source of this unit to PORTABLE using FUNC button.
3. BLUETOOTH® connection
LG SH7(XX:XX)
1. Select the input source of this unit to Bluetooth function using FUNC button.
“BT READY” appears on the display window.
2. Select “LG SH7(XX:XX)” on your Bluetooth device for pairing.
3. When this unit is successfully connected with your Bluetooth device, “PAIRED” will appear on the display
window and will soon change to the Bluetooth device name.
If it is unavailable to display device name on the unit, ”_” will be display.
4. Play music on your Bluetooth device.
5 Troubleshooting
Troubleshooting18
Troubleshooting
5
Troubleshooting
No woofer sound
You can set up wireless connection manually, when
your connection is not completed.
1. Adjust volume level of the main unit to minimum.
- ”VOL MIN” appears on the display window.
VOL
YRO#PLQ
VXE0ZI
UHVHW
2. Press and hold (MUTE) on the remote control
for about 3 seconds.
- “SUB-WF RESET” appears on the display
window briey.
VOL
YRO#PLQ
VXE0ZI
UHVHW
3. If the LED of the wireless subwoofer already
blinks in green continually, you can skip this step.
Press and hold PAIRING on the back of the
wireless subwoofer for more than 5 seconds.
- The LED of the wireless subwoofer lights up
alternately in red and green.
Red Green
4. Disconnect the power cord of the main unit and
the wireless subwoofer.
5. Connect them again after the LED of the main
unit and the wireless subwoofer is fully turned off.
The main unit and the wireless subwoofer will be
paired automatically when you turn on the main
unit.
- When the connection is completed, you can see
the green LED on the subwoofer.
Green
In case that sounds are cut off during
playback
y
For best performance of wireless connection such
as Bluetooth or wireless subwoofer, do not install
the unit on Metallic furniture and raises the height
by attaching accessory foot because wireless
connection communicates through a module
positioned on the bottom of the unit.
y
Be careful not to make scratches on the surface of
the Unit /Sub-Woofer when installing or moving
them.
y
It takes a few seconds (and may take longer) for
the main unit and the subwoofer to communicate
with each other and make sounds.
y
The closer the main unit and the subwoofer, the
better sound quality. It is recommended to install
the main unit and the subwoofer as close as
possible and avoid the cases below.
- There is a obstacle between the main unit and
the subwoofer.
- There is a device using same frequency with
this wireless connection such as a medical
equipment, a microwave or a wireless LAN
device.
Troubleshooting 19
Troubleshooting
5
Software Update
When the MUSICow product is connected to
your home network, rst of all, check whether the
rmware version is the latest on all speakers and the
Music Flow Player application.
Your MUSICow device might require a more recent
rmware to be installed for optimal operation.
[Settings
à
Version Info.]: you can check if your
speaker has the latest rmware.
How can I initialize speaker?
If you press down “ (Add)” button until Beep
sounds once, the network related settings are
initialized. (For sound bar, “DISABLED” is displayed in
the display window.)
If you press down “ (Add)” button until Beep
sounds twice, factory initialization is performed.
(For sound bar “RESET” is displayed in the display
window.)
Speaker is not connected.
1. For a speaker that is already connected, make
sure the phone is connected to the same router
as the speaker. If not, connect to the same router,
also check the following.
1-1. Set Power off / on, and check the
connection.
1-2. If it is not solved by 1-1, close the
application and run again.
1-3.
If it is not solved by 1-2, reset the Speaker and
reconnect. Press and hold the “ (Add)”
button until you hear the beep sound twice.
1-4. If it is not solved by 1-3, delete the App and
reinstall, then try again.
2. If you change the location of the speaker that is
in use,
2-1. If the changed location is too far from the
home router, it may not be connected. Place
and use it at a location that is closer to
router.
2-2. Connect the speaker with a LAN cable, and
for additional installed speakers, if they are
not close enough to the speaker connected
with a LAN cable, install a Bridge or another
speaker in the middle location between the
speaker connected with LAN cable and the
speaker with sound being disconnected.
There are times that speaker disappears
from the application
1. If the speaker blinking lamp is not blinking, and
stays as white: Even after the speaker power off
and on, if the problem continues, in this case you
have to reset the speaker (Press and hold the
“ (Add)” button until you hear the beep sound
twice.) then you need to register again. Carry out
speaker installation or additional procedures.
2. If the speaker blinking lamp blinks white -
network signal is unstable. Wait for a while, or
move the speaker to another location closer to
another speaker or router.
3. Press menu key or menu at the top right side of
Home screen to end Music Flow Player app and
run again.
NOTES to use wireless
This device may have wireless interference.
y
Wireless may not operate normally in weak signal
area.
y
Please install the device close enough to wireless
subwoofer.
y
Do not install the device on metal furniture for
optimum performance.
Bluetooth device may malfunction or make noise
in the following cases.
y
When any part of your body contact the
transceiver of the Bluetooth device or sound bar.
y
When there is an obstacle or wall or the device is
installed in a secluded spot.
y
When there is a device(a wireless LAN, a medical
equipment or a microwave) using same frequency,
make the distance between the products as far
away as possible each other.
y
When connecting the device to the Bluetooth
device, make the distance between the products
as close as possible each other.
y
When the device gets too far from the Bluetooth
device, the connection is disconnected and also
malfunction may occur.
Troubleshooting20
Troubleshooting
5
Music sound breaks and unstable
MUSICflow system
1. If speaker with breaking sound is connected
through wireless connection mode,
y
If the distance between the speaker and home
router is not close enough, the corresponding
condition may occur. Move the speaker closer
to the home router and try again.
y
If the device playing the source sound (Ex.
phone or laptop) is at a place without uent
home router signal, move the corresponding
device closer to the home router and try again.
2. If you connected a speaker with a LAN cable and
installed additional speakers:
If the speaker with frequent sound breaking is
not close enough with the LAN cable connected
speaker, install a Bridge or another speaker in
the middle location between the LAN cable
connected speaker and the speaker with sound
breaking, and try again.
3. Even if you connected speakers with MUSICflow
mesh network, music sound breaks by ambient
signal interference causing Wi-Fi network defect.
In this case, you can try to change Mesh network
channel of MUSICflow system at the [Settings
à
Advanced settings
à
Mesh Network Channel].
How can I compose Music Library? /
Song is not added even though library is
updated.
Just by adding a song to DLNA server, Music Library is
not automatically updated. When you add a song to
the server, in [Settings
à
Music Library
à
Sync], run
Music Library synchronization again. Even after Music
Library synchronization, if song is not added, check
the followings.
1. Check if DLNA server or PC SW shared folder is
designated.
2. Check if DLNA server contents list is renewed.
y
Even if you copy the le into the server, server
contents list may not be immediately renewed,
so check the server setting.
y
If you copy a song into the phone with
a method other than MTP, it may not be
reected to the server contents list. In such
case, rescan the contents in the phone, or turn
off and start the phone again.
3. The sharing may be blocked, so check DLNA
server program setting or firewall setting.
y
If you are using LG Musicow PC software,
when you designate shared folder, the
corresponding folder will be automatically
added to Music Library in a minute.
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
LG SH7 Le manuel du propriétaire
- Catégorie
- Haut-parleurs de la barre de son
- Taper
- Le manuel du propriétaire
dans d''autres langues
- English: LG SH7 Owner's manual