Samsung UN60JU7100F Guide de démarrage rapide

Catégorie
Téléviseurs LED
Taper
Guide de démarrage rapide
If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance.
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model _____________Serial No. _____________
user manual
[JU7100-ZC]BN68-06967L-00L02.indb 1 2015-03-12 오전 11:41:08
English - 2
The slots and openings in the cabinet and in the back
or bottom are provided for necessary ventilation. To
ensure reliable operation of this apparatus and to
protect it from overheating, these slots and openings
must never be blocked or covered.
N Do not place this apparatus in a confined space,
such as a bookcase or built-in cabinet, unless
proper ventilation is provided.
N Do not place this apparatus near or over a radiator
or heat register, or where it is exposed to direct
sunlight.
N Do not place vessels (vases etc.) containing water
on this apparatus, as this can result in a fire or
electric shock.
Do not expose this apparatus to rain or place it near
water (near a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming
pool etc.). If this apparatus accidentally gets wet,
unplug it and contact an authorized dealer immediately.
This apparatus uses batteries. In your community, there
might be environmental regulations that require you to
dispose of these batteries properly. Please contact your
local authorities for disposal or recycling information.
Do not overload wall outlets, extension cords or
adaptors beyond their capacity, since this can result in
fire or electric shock.
Power-supply cords should be placed so that they are
not likely to be walked on or pinched by items placed
upon or against them. Pay particular attention to cords
at the plug end, at wall outlets, and at the point where
they exit from the appliance.
To protect this apparatus from a lightning storm, or
when left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to
the set due to lightning and power line surges.
Before connecting the AC power cord to the DC
adaptor outlet, make sure that the voltage designation
of the DC adaptor corresponds to the local electrical
supply.
Never insert anything metallic into the open parts of this
apparatus. This may cause a danger of electric shock.
To avoid electric shock, never touch the inside of this
apparatus. Only a qualified technician should open this
apparatus.
Be sure to plug in the power cord until it is firmly
seated. When unplugging the power cord from a wall
outlet, always pull on the power cord's plug. Never
unplug it by pulling on the power cord. Do not touch
the power cord with wet hands.
If this apparatus does not operate normally - in
particular, if there are any unusual sounds or smells
coming from it - unplug it immediately and contact an
authorized dealer or service center.
Be sure to pull the power plug out of the outlet if the TV
is to remain unused or if you are to leave the house for
an extended period of time (especially when children,
elderly or disabled people will be left alone in the
house).
N Accumulated dust can cause an electric shock,
an electric leakage, or a fire by causing the power
cord to generate sparks and heat or by causing the
insulation to deteriorate.
Be sure to contact an authorized service center for
information if you intend to install your TV in a location
with heavy dust, high or low temperatures, high
humidity, chemical substances, or where it will operate
24 hours a day such as in an airport, a train station, etc.
Failure to do so may lead to serious damage to your TV.
Use only a properly grounded plug and wall outlet.
N An improper ground may cause electric shock or
equipment damage. (Class l Equipment only.)
Warning! Important Safety Instructions
Please read the Safety Instructions before using your TV.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED
PERSONNEL.
This symbol indicates that high voltage is present
inside. It is dangerous to make any kind of contact
with any internal part of this product.
This symbol indicates that this product has included
important literature concerning operation and
maintenance.
[JU7100-ZC]BN68-06967L-00L02.indb 2 2015-03-12 오전 11:41:09
English - 3
To turn off this apparatus completely, disconnect it from
the wall outlet. To ensure you can unplug this apparatus
quickly if necessary, make sure that the wall outlet and
power plug are readily accessible.
Do not allow children to hang onto the product.
Store the accessories (battery, etc.) in a location safely
out of the reach of children.
Do not install the product in an unstable location such
as a shaky shelf or a slanted floor or in a location
exposed to vibration.
Do not drop or strike the product. If the product is
damaged, disconnect the power cord and contact a
service center.
To clean this apparatus, unplug the power cord from
the wall outlet and wipe the product with a soft, dry
cloth. Do not use any chemicals such as wax, benzene,
alcohol, thinners, insecticide, air fresheners, lubricants,
or detergents. These chemicals can damage the
appearance of the TV or erase the printing on the
product.
Do not expose this apparatus to dripping or splashing.
Do not dispose of batteries in a fire.
Do not short-circuit, disassemble, or overheat the
batteries.
There is danger of an explosion if you replace the
batteries used in the remote with the wrong type of
battery. Replace only with the same or equivalent type.
WARNING - TO PREVENT THE SPREAD
OF FIRE, KEEP CANDLES OR OTHER
ITEMS WITH OPEN FLAMES AWAY FROM
THIS PRODUCT AT ALL TIMES.
Use care when touching the TV after it has been on for
some time. Some parts can be warm to the touch.
Internet security
Samsung takes a number of steps to protect its Internet-
compatible Smart TVs against unauthorized incursions and
hacking. For example, certain sensitive communications
between the TV and the Internet servers are encrypted. In
addition, the TV’s operating system has adopted controls to
prevent the installation of unauthorized applications.
Although we take steps to protect your Smart TV and
personal information, no Internet-connected device or
transmission is completely secure. We therefore encourage
you to take additional steps to safeguard your TV,
secure your Internet connection, and minimize the risk of
unauthorized access. These steps are listed below:
When Samsung releases software updates to improve
the security of your TV, you should promptly install
these updates. To automatically receive these updates,
turn on
Auto Update
in the TV's menu (
Support
>
Software Update
>
Auto Update
). When an update
is available, a popup message appears on the TV
screen. Accept the software download and update
by selecting YES when prompted. Take steps to
secure your wireless router and network. Your router's
manual should provide additional details about how to
implement the following measures:
Secure your wireless router's management settings
with a unique password to prevent unauthorized
changes to security related settings.
Implement standard encryption (e.g., WPA2
encryption) on your wireless router to secure your
wireless network signal.
Secure access to your wireless network with a hard-
to-guess password.
Confirm your router's firewall setting is enabled (if so
equipped).
Make sure that all your internet-connected devices
are behind your network's firewall.
If your router or modem has a standby mode button,
use it to disconnect your home network from the
Internet when it is not in use.
Use strong passwords for all your Internet accounts
(Netflix, Facebook, Skype, etc.). If your TV has a
camera, recess the camera into the TV's bezel
when it is not in use. Recessing the camera makes it
inoperative.
If any unexpected messages appear on your TV screen
requesting permission to link a device or enable a
remote session, do NOT accept.
Do not visit suspicious web sites and do not install any
suspicious programs. We recommend that users install
only those authorized apps provided by Samsung
through Samsung Smart Hub.
Figures and illustrations in this User Manual are provided
for reference only and may differ from the actual product
appearance. Product design and specifications may
change without notice.
[JU7100-ZC]BN68-06967L-00L02.indb 3 2015-03-12 오전 11:41:09
English - 4
Features of Your New TV
3D
Enjoy 3D content on your TV with this new feature.
N To use this function, you must purchase the 3D glasses.
Smart Hub
Your TV features Smart Hub, a multi-purpose entertainment and family center. You can use Smart Hub to surf the web or
download and run applications. In addition, you can view or play photo, video, and music files stored on external storage
devices.
N Refer to the e-Manual for details.
e-Manual
Get help from a detailed, on-screen user's manual built into your TV.
Smart interaction
Access and control menu options and functions using motions. To use Smart Interaction, connect the TV camera (sold
separately) to the TV.
N Refer to the e-Manual for details.
Contents
1. Package Content
2. Initial Setup
3. The Samsung Smart Control
4. Smart Hub
5. The e-Manual
6. Troubleshooting and Maintenance
10 Troubleshooting
11 Network troubleshooting
12 Getting remote support for your TV
13 Eco Sensor and screen brightness
13 Still image warning
13 Caring for the TV
7. Specifications and Other Information
14 Specifications
16 Licenses
8. TV Installation
17 Mounting the TV on a wall
18 Providing proper ventilation for your TV
19 Safety Precaution: Securing the TV to the wall
to prevent falling
19 Arranging the cables with the cable guide
FCC and Warranty Information
[JU7100-ZC]BN68-06967L-00L02.indb 4 2015-03-12 오전 11:41:09
English - 5
1. Package Content
Make sure the following items are included with your TV. If any items are missing, contact your dealer.
Samsung Smart Control & Batteries (AA x 2)
User Manual
Warranty Card / Regulatory Guide
Power Cord
One connect Mini One connect Mini cable RCA Adapter
Component Adapter
N The items’ colors and shapes may vary depending on the models.
N Cables not included can be purchased separately.
N Check for any accessories hidden behind or in the packing materials when opening the box.
The screen can be damaged from direct pressure when handled incorrectly.
As shown in the figure, make sure to grip the edges of the screen when you
lift the TV.
Don't Touch
This Screen!
[JU7100-ZC]BN68-06967L-00L02.indb 5 2015-03-12 오전 11:41:09
English - 6
2. Initial Setup
When you turn on your TV for the first time, it immediately starts the Initial Setup. During Initial Setup, your TV pairs with the
Samsung Smart Control, connects to your home network, implements Smart Hub agreements, links to the source of your live
TV signal, and sets up control of your cable or satellite box.
Information You Need
Have the following information on hand before you turn on
your TV for the first time:
Your wireless networks password. (Make sure your
network is on.)
Your Postal or Zip code.
The name and location of your cable or satellite
provider (if you use one).
Internet Access
The TV must be connected to the Internet to use the Smart
Features. If you have a wireless network, confirm that your
network router is working before you start the initial setup.
If you have a wired network, connect the TV’s LAN port to
the network with an Ethernet cable before you begin (CAT 7
cable preferred).
Running Initial Setup
1. Point the Samsung Smart Control at the TV.
2. Press the
button on the Samsung Smart Control to turn on the TV,
and then follow the directions on the screen.
Once your Samsung Smart Control has paired, you can use the Samsung
Smart Control to move the pointer on the screen. Place a finger on the
POINTER
button, and then move the Samsung Smart Control. The pointer
on the screen moves in the direction you moved the Samsung Smart
Control. To select items, press the
POINTER
button. For more information
about using the Samsung Smart Control, see "The Samsung Smart Control
" on page 7.
To learn more about operating your TV and its Smart Features, launch the TV’s built in e-Manual after you have completed the
Initial Setup. For information about the e-Manual, see "The e-Manual" on page 9.
Using the TV Controller
You can use the TV Controller on the back of the TV instead of the remote control to control most of the functions of your TV.
While watching TV or cable TV, you can change the channel or adjust the volume by pressing the Control Stick. When using
Smart Hub, the TV's menu, or selecting a source, move the Control Stick up, down, left, or right to move the cursor. Press the
Control Stick to select or activate the item highlighted by the cursor.
Control Stick
The
Control Stick
is located on
the lower left corner of the back
of the TV.
: Opens
Smart Hub
.
: Opens the menu.
: Selects a source.
: Turns off the TV.
w
/
v
: Changes the volume.
<
/
>
: Changes the channel.
Control Menu
[JU7100-ZC]BN68-06967L-00L02.indb 6 2015-03-12 오전 11:41:10
English - 7
3. The Samsung Smart Control
: Press this button to mute the sound temporarily.
CC: Press and hold this button to show or hide captions on the TV's screen.
MIC
: Use the microphone with the Voice Recognition and Voice functions.
: Turns the TV on or off.
SOURCE: Displays and selects the available video sources.
MENU/123: Press this button to display the On-Screen Remote.
Displays the numeric buttons, the Source button, the Menu button, and
other function buttons on the top of the screen so that you can run
functions conveniently.
Press and hold this button to run the
Voice Recognition
function.
POINTER: Place a finger on the
POINTER
button and move the
Samsung Smart Control. The pointer on the screen moves in the
direction you moved the Samsung Smart Control. Press the
POINTER
button to select or run a focused item.
y
: Changes the volume.
z
: Changes the channel.
<
>
¡
£
: Moves the focus and changes the values seen on the
TV's menu.
(Enter): Press this button to select or run a focused item.
Press and hold this button to launch the
Guide
while you are
watching the TV.
RETURN
: Press this button to return to the previous menu.
EXIT: Press and hold this button to exit the currently running
function on the TV's screen.
: Use these buttons with a specific feature according to the
directions on the TV's screen.
EXTRA
:
Displays related information about the current program.
SMART HUB
: Press this button to bring up
Smart Hub
applications. (See the e-Manual chapter, "Smart Features > Smart Hub.")
Pairing the TV to the Samsung Smart Control
When you turn on the TV for the first time, the Samsung Smart Control pairs
to the TV automatically. If the Samsung Smart Control does not pair to the TV
automatically, point it at the remote control sensor of the TV, and then press and
hold the buttons labeled and in the diagram on the left simultaneously for
3 seconds or more.
Using the SOURCE button to switch between video sources
Press the
SOURCE
button to switch between external devices connected to the TV. For example, to switch to a game
console connected to the second HDMI connector, press the
SOURCE
button. The
Source
list appears across the top of the
screen. From the
Source
list, select
HDMI2
.
N The connector names may differ with the product chosen.
[JU7100-ZC]BN68-06967L-00L02.indb 7 2015-03-12 오전 11:41:11
English - 8
Installing batteries into the Samsung Smart Control
To install the batteries, push the rear cover open in the
direction of the arrow and insert the batteries as shown in
the figure. Make sure that the positive and negative ends
are facing in the correct direction.
N Alkaline batteries are recommended for longer
battery life.
Using the On-Screen Remote
Press the
MENU/123
button on the Samsung Smart Control to
display the On-Screen Remote on the TV's screen. Use the On-
Screen Remote to enter numbers and control content playback.
Select buttons on the top of the screen to use the features and
functions of the TV, just like a real remote.
N The On-Screen Remote may vary depending on the features
or functions you are using.
N Refer to the e-Manual for details.
Using the POINTER to operate the TV
Place a finger on the
POINTER
button of the Samsung Smart
Control, and then move the Samsung Smart Control. The pointer
on the screen moves in the direction you moved the Samsung
Smart Control. Press the
POINTER
button to select or run a
focused item.
ਜ࠸ੲܒ
92/&+
32,17(5
ތװ
[JU7100-ZC]BN68-06967L-00L02.indb 8 2015-03-12 오전 11:41:12
English - 9
4. Smart Hub
Smart Hub is the control center of your TV and its most important feature. You can use Smart Hub to surf the web, download
and play apps and games, and playback photo, video, and music files stored on Blue-ray players, USB devices, smart
phones, personal tablets, computers, and the Internet.
To open Smart Hub, press the
button on the remote control. Smart Hub services are divided into two groups,
Recent
(recently used) and
Featured
, at the bottom of the screen. The currently active group, with individually displayed icons, is on
the right. The currently inactive group is on the left. To access the services in the inactive group, select that group, and then
press the Enter button.
To launch a service, select its icon and then press the Enter button. You can only select and launch services from the active
group.
For more information about Smart Hub, see the e-Manual.
N You must have the TV connected to the Internet to access Smart Hub.
5. The e-Manual
The embedded e-Manual contains information about the key features of your TV.
N You can download and view a printable version of the e-Manual on the Samsung website.
Displaying the e-Manual:
• On the Samsung Smart Control, press the
MENU/123
button, and then select
e-Manual
on the On-Screen
Remote.
• In the TVs menu, select
Support
>
e-Manual
.
Using the buttons available on the main screen of the e-Manual
(
Search
): Select an item from the search results to load the corresponding page.
(
Index
): Select a keyword to navigate to the relevant page.
(
Recently Viewed Topics
): Select a topic from the list of recently viewed topics.
Accessing the associated menu screen from an e-Manual topic page
(
Try Now
): Access the associated menu item and try out the feature directly.
(
Link
): Access a topic referred to on an e-Manual topic page.
Accessing the associated e-Manual topic from a menu screen
Press the
MENU/123
button on the Samsung Smart Control, then select
e-Manual
on the On-Screen Remote to read the
e-Manual topic about a current screen menu function.
N The e-Manual cannot be accessed from some menu screens.
Updating the e-Manual to the latest version
You can update the e-Manual in the same way you update apps.
[JU7100-ZC]BN68-06967L-00L02.indb 9 2015-03-12 오전 11:41:12
English - 10
6. Troubleshooting and Maintenance
Troubleshooting
If the TV seems to have a problem, first review this list of possible problems and solutions. Alternatively, review the
Troubleshooting Section in the e-Manual. If none of the troubleshooting tips apply, visit www.samsung.com/support or call
Samsung Customer Service at 1-800-SAMSUNG (1-800-726-7864).
N For detailed information on troubleshooting, watch the troubleshooting videos at www.samsung.com/spsn.
N This TFT LED panel is made up of sub pixels which require sophisticated technology to produce. There may be,
however, a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
N To keep your TV in optimum condition, upgrade to the latest software. Use the Update Now or Auto Update functions
on the TV's menu (MENU >
Support
>
Software Update
>
Update now
or MENU >
Support
>
Software Update
>
Auto Update
).
The TV won’t turn on.
Make sure that the AC power cord is securely plugged in to the TV and the wall outlet.
Make sure that the wall outlet is working.
Confirm that the batteries in the remote are good. If not, replace them.
Try pressing the Power button on the TV to make sure that the problem is not with the remote control. If the TV turns on,
refer to “Remote control does not work” below
If the TV is connected to an antenna, check the antenna connections.
If the TV is connected to a cable/satellite box, make sure that the cable/satellite box is turned on.
There is no picture/video.
Check the cable connections. Remove and reconnect all cables connected to the TV and external devices.
Set the video outputs of your external devices (Cable/satellite box, DVD, Blu-ray etc) to match the TV's input
connections. For example, if an external device’s output is HDMI, connect it to an HDMI input on the TV.
Make sure that your connected devices are powered on.
Be sure to select the correct input source.
Reboot the connected device by unplugging the device's power cord and then plugging it in again.
The remote control does not work.
Replace the remote control batteries. Make sure that the batteries are installed with their poles (+/–) in the correct
direction.
Clean the sensor’s transmission window on the remote.
Try pointing the remote directly at the TV from 5~6 feet away.
The Cable or satellite box remote control doesn’t turn the TV on or off or adjust
the volume.
Program the cable or satellite box remote control to operate the TV. Refer to the Cable or satellite box user manual for
the SAMSUNG TV code.
[JU7100-ZC]BN68-06967L-00L02.indb 10 2015-03-12 오전 11:41:12
English - 11
Network troubleshooting
Improving your wireless signal
Position your wireless router, modem router, or access point in a central location.
Avoid putting it in a corner.
Single story Multi story
Unsuitable router position Recommended router
position
Unsuitable router position Recommended router
position
Adding a wireless repeater
Use a wireless repeater to get an instant boost in your wireless signal strength. Place the repeater halfway between your
wireless router and your TV.
Single story Multi story
Wireless router
Wireless repeater
Reducing wireless interference
The most common wireless technology, 802.11g (wireless-G), operates at a frequency of 2.4 GHz. This frequency is widely
used by many cordless phones, microwave ovens, baby monitors, garage doors, and other wireless devices. Reduce
interference by avoiding wireless devices that use the 2.4 GHz frequency. Instead, use devices that communicate via the 5.0
GHz frequency.
[JU7100-ZC]BN68-06967L-00L02.indb 11 2015-03-12 오전 11:41:13
English - 12
Intermittent Wi-Fi
Check the distance between the TV and the Modem/Router. The distance should not exceed 50ft (15.2 m).
Verify that there are no obstacles between the TV and the Modem/Router.
(The Wi-Fi strength can be decreased by appliances, cordless phones, stone walls/fireplaces, etc.)
Check the cable that connects the Modem to the Router (if you use a separate Modem and Router) to see if it is in good
condition. If it is not, replace the cable.
Connect the TV to your Modem/Router using a CAT 7 cable and try to set up a wired network connection. (MENU >
Network
>
Network Settings
).
Check
Network Status
(MENU >
Network
>
Network Status
) to see if the IP address is invalid, for example, 169.x.x.x.
If it is, call your ISP to get a valid IP address, and then ask them to check the connection not only between your Modem
and Router but also between the Modem / Router and the Internet.
If you see a valid Mac address, call your ISP and ask them to reset your network circuit to re-register the Mac addresses
of your new Modem/Router and the TV.
Netflix problems
Change the DNS to 8.8.8.8. Select MENU >
Network
>
Network Status
>
IP Settings
>
DNS setting
>
Enter
manually
>
DNS Server
> enter 8.8.8.8 >
OK
Verify that the ESN for Netflix is valid. (Go to MENU >
Support
>
Contact Samsung
)
Reset Netflix by selecting MENU >
Smart Hub
>
Reset Smart Hub
.
Smart Hub error messages
Reset Smart Hub by selecting MENU >
Smart Hub
>
Reset Smart Hub
.
Update the TVs software (MENU >
Support
>
Software Update
).
Getting remote support for your TV
Samsung Remote Support service offers you one-on-one support with a Samsung Technician who can remotely:
Diagnose your TV
Adjust the TV settings for you
Perform a factory reset on your TV
Install recommended firmware updates
How does remote support work?
You can easily have a Samsung Tech service your TV remotely:
1. Call the Samsung Contact Center and ask for remote support.
2. Open the menu on your TV and go to the Support section.
3. Select
Remote Management
, then read and agree to the service agreements. When the PIN screen appears, provide
the PIN number to the agent.
4. The agent will then access your TV. That's it!
[JU7100-ZC]BN68-06967L-00L02.indb 12 2015-03-12 오전 11:41:13
English - 13
Eco Sensor and screen brightness
Eco Sensor adjusts the brightness of the TV automatically. This feature measures the light in your room and optimizes the
brightness of the TV automatically to reduce power consumption. If you want to turn this off, go to MENU >
System
>
Eco
Solution
>
Eco Sensor
.
N If the screen is too dark while you are watching TV in a dark environment, it may be due to the
Eco Sensor
.
N Do not block the sensor with any object. This can decrease picture brightness.
Still image warning
Avoid displaying still images (such as jpeg picture files), still image elements (such as TV channel logos, stock or news crawls
at the screen bottom etc.), or programs in panorama or 4:3 image format on the screen. If you constantly display still pictures,
it can cause image burn-in on the LED screen and affect image quality. To reduce the risk of this adverse effect, please follow
the recommendations below:
Avoid displaying the same TV channel for long periods.
Always try to display any image in full screen. Use the picture format menu of the TV set for the best possible match.
Reduce brightness and contrast to avoid the appearance of after-images.
Use all TV features designed to reduce image retention and screen burn. Refer to the e-Manual for details.
Caring for the TV
N If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean the debris
off before watching TV.
N The exterior and screen of the TV can get scratched during cleaning. Be sure to wipe the exterior and screen carefully
using a soft cloth to prevent scratches.
Do not spray water or any liquid directly onto the TV. Any liquid that goes
into the product may cause a failure, fire, or electric shock.
Turn off the TV, then gently wipe away smudges and fingerprints on the
screen with a micro-fiber cloth. Clean the body of the TV with a soft cloth
dampened with a small amount of water. Do not use flammable liquids
(benzene, thinners, etc.) or a cleaning agent. For stubborn smudges,
spray a small amount of screen cleaner on the cloth, and then use the
cloth to wipe away the smudges.
[JU7100-ZC]BN68-06967L-00L02.indb 13 2015-03-12 오전 11:41:14
English - 14
7. Specifications and Other Information
Specifications
Display Resolution 3840 x 2160
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
Sound
(Output)
20 W
Model Name UN40JU7100 UN50JU7100
Screen Size
(Diagonal)
40˝ Class
(40 measured diagonally)
50˝ Class
(49.5 measured diagonally)
Dimensions (W x H x D)
Body
With stand
36.1 x 21.0 x 2.6 inches
(917.7 x 535.6 x 66.8 mm)
36.1 x 23.1 x 10.6 inches
(917.7 x 587.7 x 271.7 mm)
44.4 x 25.7 x 2.6 inches
(1128.8 x 654.3 x 67.4 mm)
44.4 x 27.8 x 10.9 inches
(1128.8 x 706.8 x 277.7 mm)
Weight
Without Stand
With Stand
18.2 lbs (8.3 Kg)
22.9 lbs (10.4 Kg)
27.5 lbs (12.5 Kg)
33.7 lbs (15.3 Kg)
Model Name UN55JU7100 UN60JU7100
Screen Size
(Diagonal)
55˝ Class
(54.6 measured diagonally)
60˝ Class
(60 measured diagonally)
Dimensions (W x H x D)
Body
With stand
48.9 x 28.2 x 2.6 inches
(1242.6 x 718.3 x 67.4 mm)
48.9 x 30.3 x 10.9 inches
(1242.6 x 770.5 x 277.7 mm)
53.6 x 31.0 x 2.6 inches
(1363.6 x 789.3 x 68.2 mm)
53.6 x 33.0 x 11.6 inches
(1363.6 x 838.9 x 295.1 mm)
Weight
Without Stand
With Stand
33.9 lbs (15.4 Kg)
40.1 lbs (18.2 Kg)
47.1 lbs (21.4 Kg)
56.4 lbs (25.6 Kg)
[JU7100-ZC]BN68-06967L-00L02.indb 14 2015-03-12 오전 11:41:14
English - 15
Model Name
UN65JU7100 UN75JU7100
Screen Size
(Diagonal)
65˝ Class
(64.5 measured diagonally)
75˝ Class
(74.5 measured diagonally)
Dimensions (W x H x D)
Body
With stand
57.6 x 33.2 x 2.7 inches
(1463.4 x 844.2 x 68.8 mm)
57.6 x 35.3 x 11.6 inches
(1463.4 x 897.0 x 295.1 mm)
66.4 x 38.2 x 2.7 inches
(1688.8 x 971.0 x 70.2 mm)
66.4 x 40.7 x 12.7 inches
(1688.8 x 1035.8 x 325.0 mm)
Weight
Without Stand
With Stand
52.6 lbs (23.9 Kg)
61.9 lbs (28.1 Kg)
82.0 lbs (37.2 Kg)
94.5 lbs (42.9 Kg)
Notes
Design and specifications are subject to change without prior notice.
The actual appearance of the TV may differ from the images in this manual, depending on the model.
Typical power consumption is measured according to Energy Star Program requirements for televisions.
Your TV and its accessories may look different than the product images presented in this manual, depending on the
model.
All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the
dimensions before installing your TV. Not responsible for typographical or printed errors.
© 2015 Samsung Electronics America, Inc
[JU7100-ZC]BN68-06967L-00L02.indb 15 2015-03-12 오전 11:41:14
English - 16
Decreasing power consumption
When you shut the TV off, it enters Standby mode. In Standby mode, it continues to draw a small amount of power. To
decrease power consumption, unplug the power cord when you don't intend to use the TV for a long time.
Dimensions
Port panel detail / Rear view
2
1
4
3
N The displayed image may differ from your TV, depending on the model.
(Unit: inches)
Model name
1 2 3 4
UN40JU7100 4.9 14.1 5.2 8.0
UN50JU7100 3.7 14.3 7.7 8.6
UN55JU7100 5.9 16.5 11.0 10.4
UN60JU7100 7.0 18.9 12.8 11.0
UN65JU7100 8.6 20.9 14.7 12.6
UN75JU7100 9.9 25.3 12.5 13.4
Licenses
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
[JU7100-ZC]BN68-06967L-00L02.indb 16 2015-03-12 오전 11:41:15
English - 17
8. TV Installation
Mounting the TV on a wall
If you mount this TV on a wall, follow the instructions exactly as set out by the manufacturer. Unless it is
correctly mounted, the TV may slide or fall and cause serious injury to a child or adult and serious damage
to the TV.
Installing the wall mount kit
You can mount the TV on the wall using a wall mount kit (sold separately).
TVWall mount
bracket
C
For detailed information about installing the wall mount, see the instructions provided with the wall mount kit. We recommend
that you contact a technician for assistance when installing the wall mount bracket. We do not advise you to do it yourself.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you choose to install
the wall mount on your own.
To order the wall mount kit, contact Samsung Customer Care at 1-800-SAMSUNG (1-800-726-7864).
[JU7100-ZC]BN68-06967L-00L02.indb 17 2015-03-12 오전 11:41:16
English - 18
VESA wall mount kit notes and specifications
You can install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other
than plaster board, contact your nearest dealer for additional information. If you install the TV on a ceiling or slanted wall, it
may fall and result in severe personal injury.
Standard dimensions for wall mount kits are shown in the table below.
If you are installing a third-party wall mount, note that the length of the screws you can use to attach the TV to the wall mount
is shown in column C in the table below.
Product
Family
TV size in
inches
VESA screw hole specs
(A * B) in millimeters
C (mm)
Standard
Screw
Quantity
LED-TV
40 200 X 200
20.7 ~ 21.7 M8 4
50 - 75 400 X 400
Do not install your wall mount kit while your TV is turned on. This may result in personal injury from
electric shock.
Do not use screws that are longer than the standard dimension or do not comply with the VESA standard
screw specifications. Screws that are too long may cause damage to the inside of the TV set.
For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws
may differ depending on the wall mount specifications.
Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to
personal injury. Samsung is not liable for these kinds of accidents.
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall
mount is used or the consumer fails to follow the product installation instructions.
Do not mount the TV at more than a 15 degree tilt.
Always have two people mount the TV onto a wall.
Providing proper ventilation for your TV
When you install your TV, maintain a distance of at least 4 inches between the TV and other objects (walls, cabinet sides, etc.)
to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a problem with the product caused by
an increase in its internal temperature.
When you install your TV with a stand or a wall mount, we strongly recommend you use parts provided by Samsung
Electronics only. Using parts provided by another manufacturer may cause difficulties with the product or result in injury
caused by the product falling.
Installation with a stand Installation with a wall mount
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
[JU7100-ZC]BN68-06967L-00L02.indb 18 2015-03-12 오전 11:41:16
English - 19
Safety Precaution: Securing the TV to the wall to
prevent falling
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In
particular, ensure your children do not hang on or destabilize the TV. This action
may cause the TV to tip over, causing serious injuries or death. Follow all safety
precautions provided in the Safety Flyer included with your TV. For added stability and
safety, you can purchase and install the anti-fall device as described below.
Preventing the TV from falling
These are general instructions. The brackets, screws, and string are not supplied by Samsung. They must be purchased
separately. We suggest consulting an installation service or professional TV installer for specific hardware and anti-fall
hardware installation.
1. Put the screws into one set of brackets, and then firmly fasten them to the wall.
Confirm that the screws are firmly attached to the wall.
N You may need additional material such as wall anchors depending on the
type of wall.
2. Remove the screws from the back center of the TV, put the screws into a second
set of brackets, and then fasten the screws to the TV again.
N These screws may not be supplied with the TV. For a 40-75 inch model,
purchase M8 screws.
3. Connect the brackets fixed to the TV and the brackets fixed to the wall with a
durable, heavy-duty string, and then tie the string tightly.
N Install the TV near the wall so that it does not fall backwards.
N Connect the string so that the brackets fixed to the wall are at the same
height as or lower than the brackets fixed to the TV.
N Untie the string before moving the TV.
4. Make sure that all connections are properly secured. Periodically check the connections for any sign of fatigue or failure. If
you have any doubt about the security of your connections, contact a professional installer.
Arranging the cables with the cable guide
[JU7100-ZC]BN68-06967L-00L02.indb 19 2015-03-12 오전 11:41:17
English - 20
FCC and Warranty Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not
possible.
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 20cm between the radiator & your body.
This Class B digital apparatus complies with Canadian ICES-003.
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur
de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not
possible.
This device and its antenna(s) must not be colocated or operation in conjunction with any other antenna or transmitter.
[JU7100-ZC]BN68-06967L-00L02.indb 20 2015-03-12 오전 11:41:17
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43

Samsung UN60JU7100F Guide de démarrage rapide

Catégorie
Téléviseurs LED
Taper
Guide de démarrage rapide

dans d''autres langues