Grandstream GWN7624 Guide d'installation
- Taper
- Guide d'installation
~ 1 ~ ~ 2 ~
Grandstream Networks, Inc.
126 Brookline Ave, 3rd Floor
Boston, MA 02215. USA
Tel : +1 (617) 566 - 9300
Fax: +1 (617) 249 - 1987
www.grandstream.com
For Certification, Warranty and RMA information, please visit
www.grandstream.com
GWN7624
In-Wall Wi-Fi Access Point
Quick Installation Guide
~ 1 ~ ~ 2 ~
OVERVIEW
The GWN7624 is an in-wall Wi-Fi access point designed for
small-to-medium sized businesses, offices, residential, commercial
locations, hotels and more. It provides three Gigabit network ports
to provide IP phones, IPTV, computers and similar devices with
Ethernet while also providing and uplink Gigabit network port with
PoE/PoE+. The GWN7624 offers 2.4G 2×2:2, 5G 4×4:4 MU-MIMO
technology and a sophisticated antenna design for maximum
network throughput and expanded Wi-Fi coverage range. To ensure
easy installation and management, the GWN7624 uses a
controller-less distributed network management design in which
the controller is embedded within the product’s web user interface.
The GWN7624 is also supported by GWN.Cloud and GWN Manager,
Grandstream’s free cloud and on-premise Wi-Fi management
platform. It is the ideal Wi-Fi AP for voice-over-Wi-Fi deployments
and offers a seamless connection with Grandstream’s Wi-Fi capable
IP phones. With support for advanced QoS, low-latency real-time
applications, mesh networks, captive portals and 200 concurrent
clients per AP, the GWN7624 is an ideal Wi-Fi access point for
medium wireless network deployments with medium user density.
PRECAUTIONS
•Do not attempt to open, disassemble, or modify the device.
•Do not expose this device to temperature outside range of -10 °C to 50 °C for
operation and -30 °C to 60 °C for storage.
•Do not expose the GWN7624 to environments outside of the following
humidity range: 5-95% RH (non-condensing).
•Do not power cycle your GWN7624 during system boot up or firmware
upgrade. You may corrupt firmware images and cause the unit to malfunction.
PAKEAGE CONTENTS
GWN7624 PORTS
Port
Description
PoE IN
Ethernet RJ45 port (10/100/1000Mbps) supporting
PoE/PoE+.
LAN 1
1x 10/100/1000Mbps Ethernet port.
LAN 2
KAN 3
2x 10/100/1000Mbps Ethernet ports with PSE.
Note: The maximum output of each PSE port is 6W.
RESET
Factory reset pinhole.
Press for 7 seconds to reset factory default settings.
POWERING AND CONNECTING THE GWN7624
GWN7624 can only be powered on using PoE/PoE+ switch using
following steps.
Step 1: Plug a RJ45 Ethernet cable into the PoE IN network port of
GWN7624.
Step 2: Plug the other end into the uplink port of the power over
Ethernet (PoE/PoE+) switch.
Wall
EN
1x GWN7624
Access Point
4x Screws
(KB 3.5*26)
1x Quick
Installation Guide
~ 3 ~ ~ 4 ~
HARDWARE INSTALLATION
GWN7624 can be mounted on the wall. Please refer to the
following steps for the appropriate installation.
Wall Mount
1. Use a measuring tape to measure the distance between the
four wall mount slots on the back of the GWN7624 access point
and use a pencil to mark the mounting screw holes on the wall.
2. Drill the holes in the spots that you have marked, then attach
the GWN7624 access point to the wall via the wall mount slots.
CONNECT TO GWN7624 DEFAULT Wi-Fi NETWORK
GWN7624 can be used as standalone access point out of box, or
after factory reset with Wi-Fi enabled by default.
After powering the GWN7624 and connecting it to the network,
GWN7624 will broadcast a default SSID based on its MAC address
GWN[MAC’s last 6 digits] and a random password.
Note: GWN7624’s default SSID and password information are
printed on the sticker of the unit.
ACCESSING THE CONFIGURATION INTERFACE
A computer connected to the GWN7624’s SSID, or to the same
network as the GWN7624 can discover and access its configuration
interface using one of the below methods:
Method 1: Discover GWN7624 using its MAC Address
1. Locate the MAC address on the MAC tag of the unit, which is on
the device, or on the package.
2. Form a computer connected to same network as the GWN7624,
type in following address using GWN7624’s MAC address on
your browser: https://gwn_<mac>.local
Example: If a GWN7624 has the MAC address 00:0B:82:8C:4D:F8,
this unit can be accessed by typing
https://gwn_000b828c4df8.local on the browser.
Method 2: Discover GWN7624 using GWN Discovery Tool
1. Download and install GWN Discovery Tool from the following
link:
http://www.grandstream.com/tools/GWNDiscoveryTool.zip
2. Open the GWN Discovery Tool, and click on Scan.
RJ45 Ethernet Cable to
power over Ethernet
(PoE/PoE+) Switch
~ 5 ~ ~ 6 ~
3. The tool will discover all GWN76XX Access Points connected on
the network showing their MAC and IP addresses.
4. Click on Manage Device to be redirected to the GWN7624’s
configuration interface, or type in manually the displayed IP
address on your browser.
5. Enter username and password to login. (The default
administrator username is “admin” and the default random
password can be found at the sticker on the GWN7624).
Notes:
Make sure that the GWN7624 is not already paired with another
GWN76xx Access Point as slave, GWN7000 Router Series, GWN.Cloud or
GWN Manager, otherwise the configuration interface cannot be
accessed.
If the GWN7624 is already paired, make sure to unpair it first, or do a
factory reset.
It is customer’s responsibility to ensure compliance with local regulations
for frequency bands, transmit power and others.
To manage GWN7624 over cloud, please refer to https://www.gwn.cloud.
The GNU GPL license terms are incorporated into the device
firmware and can be accessed via the Web user interface of the
device at my_device_ip/gpl_license. It can also be accessed here:
http://www.grandstream.com/legal/open-source-software
To obtain a CD with GPL source code information please submit a
written request to info@grandstream.com
Refer to online documents and FAQ for more detailed information:
http://www.grandstream.com/our-products
~ 7 ~ ~ 8 ~
For certification information, please refer to User Manuals:
http://www.grandstream.com
Common part：
This equipment complies with radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not be
co-located or operating in conjunction with any other antenna or
transmitter.This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body.
Après examen de ce matériel aux conformité ou aux limites
d’intensité de champ RF, les utilisateurs peuvent sur l’exposition aux
radiofréquences et la conformité and compliance d’acquérir les
informations correspondantes. La distance minimale du corps à
utiliser le dispositif est de 20cm.
U.S. FCC Part 15 Regulatory Information
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:(1) this device may not
cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help.
Canada Regulatory Information
Radio equipment
Operation of 5150-5250 MHz is restricted to indoor use only.
This device contains licence-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference
that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent
appareil est conforme aux CNR d’Innovation, Sciences et
Développement économique Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
1) L’appareil ne doit pas produire de brouillage;
~ 9 ~ ~ 10 ~
2) L’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le
fonctionnement.
CAN ICES-003 (B)/NMB-003(B)
This product meets the applicable Innovation, Science and
Economic Development Canada technical specifications.
Le présent produit est conforme aux spécifications techniques
applicables d'Innovation, Sciences et Développement économique
Canada.
EU Regulatory Information
In all EU member states, operation of 5150-5350 MHz is restricted
to indoor use only.
Support Frequency Bands and Power:
WLAN 2.4 GHz < 20 dBm;
WLAN 5.2 GHz < 23 dBm;
WLAN 5.3/ 5.6 GHz < 27 dBm;
The simplified EU declaration of conformity referred to in Article
10(9) shall be provided as follows:
Hereby, [Grandstream Networks, Inc.] declares that the radio
equipment type [GWN7624] is in compliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.grandstream.com
UK Regulatory Information
Operation of 5150-5350 MHz is restricted to indoor use only.
Support Frequency Bands and Power:
WLAN 2.4 GHz < 20 dBm;
WLAN 5.2 GHz < 23 dBm;
WLAN 5.3 GHz < 20 dBm;
WLAN 5.6 GHz < 27 dBm;
The simplified declaration of conformity referred to in Regulation
8& 14 shall be provided as follows :
Hereby, [Grandstream Networks, Inc.] declares that the radio
equipment type [GWN7624] is in compliance with Directive
RER2017 (S.I. 2017/1206).
The full text of the EU declaration of conformity is available at the
following internet address: www.grandstream.com
-
1
-
2
-
3
-
4
-
5
-
6
