NOCH Scenery Set “Alp” Mode d'emploi

Taper
Mode d'emploi
NOCH GmbH & Co. KG - Lindauer Strae 49 - D-88239 Wangen im Allgu - info@noch.de - www.noch.de - Stand 06/2018
65616 Themen-Set "Alm" H0
Scenery Set "Alp" H0 - Coffret thme "Alpage" H0
Set temtico "cabaa alpina" H0 - Theme set "Alm" H0
NOCH GmbH & Co. KG - Lindauer Strae 49 - D-88239 Wangen im Allgu - info@noch.de - www.noch.de - Stand 06/2018
Hinweis:
Durch die liegende Lagerung im Bausatz kann sich der Klebstoff in der Tube nach unten abgesetzt
haben, sodass beim ersten Drcken Wasser aus der Tube entweicht. Vor dem ersten Einsatz des
Klebers daher bitte die Tube kurz durchkneten und zunchst auf einem Blatt Papier probieren.
Fr die Verklebung von kleinen Teilen empfehlen wir Ihnen den einzeln erhltlichen NOCH Laser-Cut
Kleber (Art.-Nr. 61104) mit der besonders feinen Dosierspitze.
Note:
Owing to the horizontal storage of the glue in the package it is possible that some water will come out
when first pressing the tube. Before first use, please knead the tube briefly and make a test on a
sheet of paper. For fixing small parts we recommend the NOCH Laser-Cut Adhesive (ref. 61104) with
a very fine dosing tip.
Indication:
A cause du stockage horizontal, la colle dans le tube peut se dposer vers le bas de sorte que de
l'eau s'chappe du tube en le pressant pour la premire fois. Avant le premier usage, il faut donc
ptrir le tube et faire un test sur une feuille de papier. Pour le collage des petits lments, il convient
d'utiliser de la colle Laser-Cut NOCH (rf. 61104) avec la fine pointe de dosage.
Nota:
Debido al almacenamiento horizontal del kit, es posible que el pegamento se haya asentado en la
base, y que al ejercer la primera presin sobre el tubo salga agua. Por ello antes de usar el
pegamento por primera vez, amase el tubo brevemente y prubelo primero sobre un papel.
Para la encolado de piezas pequeas, recomendamos el pegamento especial para cartn cortado
por lser NOCH disponible individualmente (Ref. 61104) con la boquilla dosificadora especialmente
fina.
Aanwijzing:
Door het liggend opslaan van de bouwdoos kan de lijm in de tube naar onderen gelopen zijn,
waardoor bij de eerste keer drukken water uit de tube komt. Voor gebruik van de lijm daarom eerst
de tube kort kneden en dan op een stukje papier uitproberen.
Voor het lijmen van kleine onderdelen adviseren wij de los verkrijgbare speciale NOCH laser-cut lijm
(art. nr. 61104) met de zeer fijne doseerpunt.
Dieses Gebude besteht aus sehr vielen Einzelteilen.
Bitte trennen Sie die Teile erst dann aus der Platte,
wenn der jeweilige Arbeitsschritt erreicht ist. Eine
handschriftliche Nummerierung am Plattenrand kann
sehr hilfreich sein.
-------------------------------------
This building consists of a large number of single parts.
Please do not rip the parts out of the plate before you
need them for the next assembly step.
It can be very useful to number the plates on the edges.
NOCH GmbH & Co. KG - Lindauer Strae 49 - D-88239 Wangen im Allgu - info@noch.de - www.noch.de - Stand 06/2018
1234
7
56
8 (2x)
9
13
12 14
15
16
11
17
18
10
19
22
20
26
23
24
21
25
NOCH GmbH & Co. KG - Lindauer Strae 49 - D-88239 Wangen im Allgu - info@noch.de - www.noch.de - Stand 06/2018
30
29 (2x)
28 31
32
33
34
27 (10x)
37 38 (3x) 41
40 42
39 (2x)
43
45
47
44
46
G
V
36
35
Z (6x)
K (9x)
S
NOCH GmbH & Co. KG - Lindauer Strae 49 - D-88239 Wangen im Allgu - info@noch.de - www.noch.de - Stand 06/2018
1. 2.
3.
4.
20
G (2x)
V
V31
22
G (2x)
V (2x)
26
(22)
21
(20)
24
25
23
V = Vorhang nach Wahl.
-------------------------------
Add curtains at your choice.
V = Vorhang nach Wahl.
-------------------------------
Add curtains at your choice.
28
NOCH GmbH & Co. KG - Lindauer Strae 49 - D-88239 Wangen im Allgu - info@noch.de - www.noch.de - Stand 06/2018
5.
6.
7.
10
17
18
12
19
14
11
13
16
15
NOCH GmbH & Co. KG - Lindauer Strae 49 - D-88239 Wangen im Allgu - info@noch.de - www.noch.de - Stand 06/2018
8.
9.
10.
37
38
38
38
7
27 (10x)
NOCH GmbH & Co. KG - Lindauer Strae 49 - D-88239 Wangen im Allgu - info@noch.de - www.noch.de - Stand 06/2018
11.
12.
13.
1
2
8
5
4
3
6
8
NOCH GmbH & Co. KG - Lindauer Strae 49 - D-88239 Wangen im Allgu - info@noch.de - www.noch.de - Stand 06/2018
14.
15.
16.
36
46
47
45
44
NOCH GmbH & Co. KG - Lindauer Strae 49 - D-88239 Wangen im Allgu - info@noch.de - www.noch.de - Stand 06/2018
ab
17.
18.
19.
9
34
33
(34)
32
Klebeflche /surface for adhesive
NOCH GmbH & Co. KG - Lindauer Strae 49 - D-88239 Wangen im Allgu - info@noch.de - www.noch.de - Stand 06/2018
20. 21. 22.
23.
39
39
42
41
40
NOCH GmbH & Co. KG - Lindauer Strae 49 - D-88239 Wangen im Allgu - info@noch.de - www.noch.de - Stand 06/2018
24. 25.
26.
29
35
29
30
43
27.
Teile Z (Zaun), K (Khe)
und S (Streumaterial) zur
Ausgestaltung nach Wahl.
-------------------------------------------
Add parts Z (fence), K (cows)
and S (Scatter Grass) at your choice.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

NOCH Scenery Set “Alp” Mode d'emploi

Taper
Mode d'emploi