MATTEO C61803 Manuel utilisateur

Ensure main supply is switched oﬀ.

machine screw(2).

Fit the end of chain(6) onto the metal ring and pull out the

wire from canopy(4).

Connect wires(3) according to color (White to White, Black

to Black). Connect all earth plug together onto the crossbar

Hold the ﬁxture and aim the hole on canopy at the screw

with ﬁnials(5).

Install the lamps(8) ﬁrmly into lampholder.

Fit glass shade(9) onto ﬁxture and secure glass with screws(7).

Reconnect power.

INSTALLATION INSTRUCTIONS SHEET

C61803

Please Note:START FROM HERE

▪

Make sure power is completely off at the fuse box.

Have your fixture installed by a qualified licensed

electrician

Prepare everything in clear area.

Wear gloves at all times during this installation.

Read instructions carefully before you start assembly.

Keep this instruction sheet for future reference.

Technical Support:1-844-628-8368

• All Matteo Lighting fixtures come with pre-wired module(s).

• Unless instructed to do so, please do not touch any part of the module(s) as any

unnecessary contact with the module could cause permanent damage.

THIS LUMINAIRE MUST BE MOUNTED OR SUPPORTED IN A JUNCTION BOX

CE LUMINAIRE DOIT ÊTRE MONTÉ OU SUPPORTÉ DANS UNE BOÎTE

DE JONCTION

www.matteolighting.com

Toll Free. 1.844.628.8368 E. [email protected]