Samsung QN65LS03RAF Manuel utilisateur

USER MANUAL

Thank you for purchasing this Samsung product.

To receive more complete service, please register your product at www.samsung.com

Model Serial No.

If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance.

LS03R SERIES LS03R SÉRIE

Before Reading This User Manual

This TV comes with this user manual and an embedded e-Manual.

Before reading this user manual, review the following:

User Manual

Read this provided user manual to see information

about product safety, installation, accessories, initial

configuration, and product specifications.

e-Manual

For more information about this TV, read the e-Manual

embedded in the product.

 To open the e-Manual,

> Settings > Support > Open e-Manual

On the website (www.samsung.com), you can download the manuals and see its contents on your PC or mobile device.

Learning the e-Manual's assistance functions

Search

Select an item from the search results to load the corresponding page.

Index

Select a keyword to navigate to the relevant page.

Recently Viewed

Topics

Select a topic from the list of recently viewed topics.

 Some menu screens cannot be accessed from the e-Manual.

Learning the functions of the buttons that appear on e-Manual topic pages

Try Now

Allows you to access the corresponding menu item and try out the feature

right away.

Link

Access an underlined topic referred to on an e-Manual page immediately.

English - 2

English

Warning! Important Safety Instructions

Please read the Safety Instructions before using your TV.

Refer to the table below for an explanation of symbols which may be on your Samsung product.

CAUTION

Class II product: This symbol indicates that a

safety connection to electrical earth (ground)

is not required. If this symbol is not present on

a product with a power cord, the product MUST

have a reliable connection to protective earth

(ground).

RISK OF ELECTRIC SHOCK. DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). THERE ARE NO USER

SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO

QUALIFIED PERSONNEL.

AC voltage: Rated voltage marked with this

symbol is AC voltage.

This symbol indicates that high voltage is

present inside. It is dangerous to make any kind

of contact with any internal part of this product.

DC voltage: Rated voltage marked with this

symbol is DC voltage.

This symbol indicates that this product has

included important literature concerning

operation and maintenance.

Caution. Consult instructions for use: This

symbol instructs the user to consult the user

manual for further safety related information.

 The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure

reliable operation of this apparatus and to protect it from overheating, these slots and openings must never be

blocked or covered.

– Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper

ventilation is provided.

– Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.

– Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a fire or electric shock.

 Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub,

in a wet basement, or near a swimming pool, etc.). If this apparatus accidentally gets wet, unplug it and contact an

authorized dealer immediately.

 This apparatus uses batteries. In your community, there might be environmental regulations that require you to

dispose of these batteries properly. Please contact your local authorities for disposal or recycling information.

 Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or

electric shock.

 Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon

or against them. Pay particular attention to cords at the plug end, at wall outlets, and at the point where they exit

from the appliance.

English - 3

 To protect this apparatus from a lightning storm, or when left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due

to lightning and power line surges.

 Before plugging in the AC power cord of the TV, make sure that the operational voltage of the TV matches the

voltage of your local electrical power supply. Refer to the power specifications section of the manual and/or the

power supply label on the product for voltage and amperage information.

 Never insert anything metallic into the open parts of this apparatus. This may cause a danger of electric shock.

 To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this

apparatus.

 Be sure to plug in the power cord until it is firmly seated. When unplugging the power cord from a wall outlet,

always pull on the power cord's plug. Never unplug it by pulling on the power cord. Do not touch the power cord

with wet hands.

 If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from

it - unplug it immediately and contact an authorized dealer or Samsung service center.

 Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are going to leave the house

for an extended period of time (especially when children, elderly, or disabled people will be left alone in the house).

– Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to

generate sparks and heat or by causing the insulation to deteriorate.

 Be sure to contact an authorized Samsung service center for information if you intend to install your TV in a location

with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a

day such as in an airport, a train station, etc. Failure to do so may lead to serious damage to your TV.

 Use only a properly grounded plug and wall outlet.

– An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

 To turn off this apparatus completely, disconnect it from the wall outlet. To ensure you can unplug this apparatus

quickly if necessary, make sure that the wall outlet and power plug are readily accessible.

 Store the accessories (batteries, etc.) in a location safely out of the reach of children.

 Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a Samsung

service center.

 To clean this apparatus, unplug the power cord from the wall outlet and wipe the product with a soft, dry cloth. Do

not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergents.

These chemicals can damage the appearance of the TV or erase the printing on the product.

 Do not expose this apparatus to dripping or splashing.

 Do not dispose of batteries in a fire.

 Do not short-circuit, disassemble, or overheat the batteries.

 There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery.

Replace only with the same or equivalent type.

 WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES AND OTHER ITEMS WITH OPEN

FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

 Use care when touching the TV after it has been on for some time. Some parts can be warm to the

touch.

English - 4

Internet security

Samsung takes a number of steps to protect its Internet-compatible Smart TVs against unauthorized incursions and

hacking. For example, certain sensitive communications between the TV and the Internet servers are encrypted. In

addition, the TV’s operating system has adopted controls to prevent the installation of unauthorized applications.

Although we take steps to protect your Smart TV and personal information, no Internet-connected device or

transmission is completely secure. We therefore encourage you to take additional steps to safeguard your TV, secure

your Internet connection, and minimize the risk of unauthorized access. These steps are listed below:

 When Samsung releases software updates to improve the security of your TV, you should promptly install these

updates. To automatically receive these updates, turn on Auto Update in the TV's menu (

> Settings >

Support > Software Update > Auto Update). When an update is available, a popup message appears on the TV

screen. Accept the software download and update by selecting Yes when prompted. Take steps to secure your

wireless access point and network. Your access point's manual should provide additional details about how to

implement the following measures:

– Secure your wireless access point's management settings with a unique password to prevent unauthorized

changes to security related settings.

– Implement standard encryption (e.g., WPA2 encryption) on your wireless access point to secure your wireless

network signal.

– Secure access to your wireless network with a hard-to-guess password.

– Confirm your access point's firewall setting is enabled (if so equipped).

– Make sure that all your Internet-connected devices are behind your network's firewall.

– If your access point or modem has a standby mode button, use it to disconnect your home network from the

Internet when it is not in use.

 Use strong passwords for all your Internet accounts (Netflix, Facebook, etc.). If your TV has a camera, recess the

camera into the TV's bezel when it is not in use. Recessing the camera makes it inoperative.

 If any unexpected messages appear on your TV screen requesting permission to link a device or enable a remote

session, do NOT accept.

 Do not visit suspicious web sites and do not install any suspicious programs. We recommend that users install only

those authorized apps provided by Samsung through Samsung Smart Hub.

Figures and illustrations in this User Manual are provided for reference only and may differ from the actual product

appearance. Product design and specifications may change without notice.

English - 5

Contents

English - 6

Before Reading This User Manual

---------------------------------------------------------------------------- 2

Warning! Important Safety Instructions

---------------------------------------------------------------------------- 3

01 Package Content

02 TV Installation

One Invisible Connection Guide ---------------------------------------------------------------------------- 8

Mounting the TV on a wall

---------------------------------------------------------------------------- 10

Providing proper ventilation for your TV

---------------------------------------------------------------------------- 11

Safety Precaution: Securing the TV to the wall to prevent

falling

---------------------------------------------------------------------------- 11

Using the Cover Cap

---------------------------------------------------------------------------- 12

Precautions when installing the TV with a stand

---------------------------------------------------------------------------- 12

03 Using Art Mode

Viewing images ---------------------------------------------------------------------------- 13

Setting the style of the selected image

---------------------------------------------------------------------------- 15

Setting up Art mode

---------------------------------------------------------------------------- 16

Using Art mode with the SmartThings app

---------------------------------------------------------------------------- 17

04 The Samsung Smart Remote

About the Buttons on the Samsung Smart Remote ---------------------------------------------------------------------------- 18

Pairing the TV to the Samsung Smart Remote

---------------------------------------------------------------------------- 19

Installing batteries into the Samsung Smart Remote

---------------------------------------------------------------------------- 19

05 Initial Setup

Using the TV Controller ---------------------------------------------------------------------------- 20

06 Troubleshooting and Maintenance

Troubleshooting ---------------------------------------------------------------------------- 21

Precautions when using Art mode

---------------------------------------------------------------------------- 23

What is Remote Support?

---------------------------------------------------------------------------- 24

Eco Sensor and screen brightness

---------------------------------------------------------------------------- 24

Caring for the TV

---------------------------------------------------------------------------- 25

07 Specifications and Other Information

Specifications ---------------------------------------------------------------------------- 26

Environmental Considerations

---------------------------------------------------------------------------- 26

Decreasing power consumption

---------------------------------------------------------------------------- 27

Dimensions

---------------------------------------------------------------------------- 28

Licenses

---------------------------------------------------------------------------- 28

01 Package Content

Make sure the following items are included with your TV. If any items are missing, contact your dealer.

 Samsung Smart Remote & Batteries (AA x 2)

 User Manual

 Warranty Card / Regulatory Guide

 Power Cord

x 4

Wall Mount Adapter One Invisible Connection One Connect Bending Cover

Cover Cap Holder-Cable

 The items’ colors and shapes may vary depending on the models.

 Cables not included can be purchased separately.

 Check for any accessories hidden behind or in the packing materials when opening the box.

The screen can be damaged from direct pressure when

handled incorrectly. As shown in the figure, make sure to

grip the edges of the screen when you lift the TV.

Do Not Touch

This Screen!

English - 7

02 TV Installation

One Invisible Connection Guide

ONE CONNECT

TV

Bending Cover

ONE CONNECT

5

4

4 inches

10 cm

To connect the One Invisible Connection to the One Connect and your TV, follow these steps:

1. After the TV is completely set up and placed in its final position, connect the One Invisible Connection to the One

Connect and the TV as shown in Steps 1 to 4 above.

WARNING: Make sure that both connectors are fully and firmly connected. If either connecter is not connected

properly, there is a danger of severe electric shock.

2. Connect the One Connect AC power cord to the One Connect, and then connect the cord to a wall outlet as shown

in Step 5 above.

WARNING: Follow the directions exactly. Be sure to connect the power cord to the wall outlet as the last step.

Always disconnect the power cord from the wall outlet before disconnecting the One Invisible Connection from

the back of the TV or from the One Connect.

– See the illustrated Quick Setup Guide for more information.

3. Connect your peripherals (antenna, cable box, Blu-ray player, etc.) to the One Connect. See the Accessory Kit for

details.

 Do not install the One Connect upside-down or standing upright on one of its sides.

 When connecting the One Invisible Connection, use a Bending Cover to bend the cable. The Bending

Cover prevents the cable of the One Invisible Connection from being bent at a 90 degree angle. Bending

the cable at a 90 degree angle can damage the cable.

 When connecting the One Invisible Connection, pay attention to the shapes and sizes of its connectors so

that they are connected correctly. Failure to do so may cause product malfunction.

 When connecting the One Invisible Connection, be careful not to twist the cable of the One Invisible

Connection. Failure to do so may cause performance degradation of the TV or damage to the cable.

 When arranging the remaining cable, refer to the figure above for the correct arrangement.

 Take care not to subject the cable to any of the actions below. The One Invisible Connection contains a

power circuit. You could damage the cable and subject yourself to an electric shock.

 Handle the One Connect carefully. It is heavy.

Bending Twisting Pulling Pressing on Electric shock

English - 8

CLASS 1 LASER PRODUCT (One Invisible Connection)

 Caution - Invisible laser radiation when open. Do not stare into beam.

– Do not bend the One Invisible Connection cable excessively. Do not cut the cable.

– Do not place heavy objects on the cable.

– Do not disassemble either of the cable connectors.

 Caution - Use of controls, adjustments, or the performance of procedures other than those specified

herein may result in hazardous radiation exposure.

English - 9

Mounting the TV on a wall

If you mount this TV on a wall, follow the instructions exactly as set out by the manufacturer. Unless it is

correctly mounted, the TV may slide or fall and cause serious injury to a child or adult and serious damage

to the TV.

For models providing wall mount adapters, install the adapters as shown in the figure below before installing the wall

mount kit.

 Refer to the installation manual included with the Samsung wall mount kit.

TV

Wall mount

bracket

Wall mount

bracket

C

Wall mount Adapter

– The shape of the wall mount adapters may differ depending on the model.

 Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you choose

to install the wall mount on your own.

 To order the wall mount kit, contact Samsung service center at 1-800-SAMSUNG (1-800-726-7864).

 You can install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to

surfaces other than plaster board, contact your nearest dealer for additional information. If you install the TV on a

ceiling or slanted wall, it may fall and result in severe personal injury.

 When installing a wall mount kit, we recommend you fasten all four VESA screws.

 If you want to install a wall mount kit that attaches to the wall using two top screws only, be sure to use a Samsung

wall mount kit that supports this type of installation. (You may not be able to purchase this type of wall mount kit,

depending on the geographical region.)

 Standard dimensions for wall mount kits are shown in the table below.

 If you are installing a third-party wall mount, note that the length of the screws you can use to attach the TV to the

wall mount is shown in column C in the table below.

TV size in

inches

VESA screw hole specs

(A * B) in millimeters

C (mm) Standard Screw Quantity

43-49 200 x 200

43-45 M8 4

55-65 400 x 400

English - 10

Do not install your wall mount kit while your TV is turned on. This may result in personal injury from electric

shock.

 Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw

specifications. Screws that are too long may cause damage to the inside of the TV set.

 For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may

differ depending on the wall mount specifications.

 Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal

injury. Samsung is not liable for these kinds of accidents.

 Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used

or when the consumer fails to follow the product installation instructions.

 Do not mount the TV at more than a 15 degree tilt.

 Always have two people mount the TV onto a wall.

Providing proper ventilation for your TV

When you install your TV and One Connect, maintain a distance of at least 4 inches (10 cm) between the One Connect

with other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may

result in a fire or a problem with the product caused by an increase in its internal temperature.

 When you install your TV with a stand or a wall mount, we strongly recommend you use parts provided by Samsung

Electronics only. Using parts provided by another manufacturer may cause difficulties with the product or result in

injury caused by the product falling.

Safety Precaution: Securing the TV to the wall to prevent falling

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure

your children do not hang on or destabilize the TV. This action may cause the TV to tip over,

causing serious injuries or death. Follow all safety precautions provided in the Safety Flyer

included with your TV. For added stability and safety, you can purchase and install the anti-fall

device as described on the next page.

WARNING: Never place a television set in an unstable location. The television set may fall, causing serious

personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions

such as:

 Using cabinets or stands recommended by the manufacturer of the television set.

 Only using furniture that can safely support the television set.

 Ensuring the television set is not overhanging the edge of the supporting furniture.

 Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring

both the furniture and the television set to a suitable support.

 Not placing the television set on cloth or other materials that may be located between the television set

and supporting furniture.

 Educating children about the dangers of climbing on furniture to reach the television set or its controls.

If you are retaining and relocating the television set that you are replacing with this new set, you should

apply the same precautions to the old set.

 When you have to relocate or lift the TV for replacement or cleaning, be sure not to pull out the stand.

English - 11

Preventing the TV from falling

1. Using the appropriate screws, firmly fasten a set of brackets to the wall.

Confirm that the screws are firmly attached to the wall.

– You may need additional material such as wall anchors depending on

the type of wall.

2. Using the appropriately sized screws, firmly fasten a set of brackets to the

TV.

– For the screw specifications, refer to "Standard Screw" in the table on

page 10.

3. Connect the brackets fixed to the TV and the brackets fixed to the wall

with a durable, heavy-duty string, and then tie the string tightly.

– Install the TV near the wall so that it does not fall backwards.

– Connect the string so that the brackets fixed to the wall are at the

same height as or lower than the brackets fixed to the TV.

 The displayed image may differ

from your TV, depending on the

model.

Using the Cover Cap

When you do not use the VESA wall mount, you can cover the wall mount

screw holes with cover caps. See the image below.

<43-49 inches> <55-65 inches>

Precautions when installing the TV with a stand

When you install the TV with a stand, avoid

placing the stand on the back part of the table

surface. Failure to do so may cause the motion

sensor at the bottom of the TV not to work

properly.

English - 12

03 Using Art Mode

> Art

You can use Art mode function to display image content such as artworks or photos when you are not watching TV in

full screen mode.

 Press the button on the remote control to switch to TV mode or Art mode.

 Press the button in Art mode to switch to TV mode.

 To turn off the TV completely, press and hold the button on the remote control, or press the TV Controller

button at the bottom of the TV.

– If you use a remote control other than the Samsung Smart Remote, the TV may not be turned off completely.

 In Art mode, the brightness and color tone of your TV are automatically adjusted depending on the ambient, and

the TV can be automatically turned on or off.

– The TV is set to turn off the screen automatically in a certain period of time after darkening the screen when

the ambient light dims in Art mode.

 You can use Art mode settings ( > Art > Settings) on the TV or SmartThings app on your mobile device to set

the sensitivity of the motion detector so that the TV can detect visual changes including user movements and turn

on or off automatically.

 In Art mode, you can connect your mobile device to the TV using the SmartThings app on the mobile device to view

photos on the mobile device.

– This function may not be supported depending on the TV model or mobile device.

– Supported features may differ depending on the version of the SmartThings app.

Viewing images

Options

Cantemporary Classic Promotion

Recents Art Store

Samsung Collection

My Collection Settings

 The image on your TV may differ from the image above depending on the model and geographical area.

To view an image in Art mode, select one of the menus on the next page. To switch to the sub menu where you can

select images, press the Select button, one of the four directional buttons, or

button in Art mode. Then, use the

directional buttons on the remote control to move to desired image, and then press the Select button.

Set appears

at the top of the selected image, and you can view the selected image in Art mode.

English - 13

 Recents

You can manipulate the last selected images.

 Art Store

You can go to Art Store to purchase various images.

– The Art Store may not appear depending on the network connection status.

 Samsung Collection

You can choose images from different topics.

 My Collection

You can view a list of artworks and photos that you set as

Favorite in Favorites. You can also select the desired

ones among the images saved on an external storage device or a mobile device and save them in My Photos.

– In order to fetch the images from your mobile device, the SmartThings app must have been installed in your

mobile device.

Viewing images by time

1. Use the directional buttons on the remote control to move to Samsung Collection or My Collection.

2. Use the directional buttons to move to one of the sub menus.

3. Use the directional buttons on the remote control to move to Options at the top of the screen.

4. Press the Select button when the Start Rotation item appears.

5. Use the directional buttons on the remote control to select the time that images will be replaced, and then press

the Select button.

Import images from an external storage device

1. Connect an external storage device that contains images to the TV.

2. Use the directional buttons on the remote control to move to My Collection, and then move to the connected

external storage device.

3. Use the directional buttons on the remote control to move to Options at the top of the screen, and then select

Save.

4. Use the directional buttons on the remote control to move to an image, and then press the Select button.

– You can select multiple images.

5. Use the directional buttons on the remote control to move to Save to My Photos at the top of the screen, and then

press the Select button.

6. The selected image or images are saved in My Photos.

 

English - 14

Buying images from Art Store

1. Use the directional buttons on the remote control to move to Art Store.

2. Use the directional buttons on the remote control to move to a topic, and press the Select button. The images

corresponding to the topic appear on the screen.

3. Use the directional buttons on the remote control to move to an image, and press the Select button.

4. Use the directional buttons on the remote control to move to Buy at the top of the screen, and then press the

Select button to buy the selected image.

5. Use the directional buttons on the remote control to select payment methods, and then press the Select button.

6. Follow the on-screen instructions to procedure payment.

Subscribing to The Art Store Membership

When you subscribe to The Art Store Membership, you can use Art Store unlimitedly and enjoy various art works by

replacing them with new ones according to your preferences.

1. Use the directional buttons on the remote control to move to Art Store.

2. Use the directional buttons on the remote control to move to Membership.

3. Follow the on-screen instructions to enter your membership information.

Setting the style of the selected image

Details

Mat Favorites

Cantemporary

 The image on your TV may differ from the image above depending on the model and geographical area.

Use the directional buttons on the remote control to move to Options at the top of the screen. You can use the

following menus:

 Details

You can find more information about the image.

 Mat

You can apply various border styles and colors to the image according to your preferences.

 Favorite

You can set (or not set) an image that you prefer as a favorite item by pressing the Select button on the remote

control. You can view a list of items set as your favorites in My Collection > Favorites.

– Favorite: Not set as a favorite.

– Favorite: Set as a favorite.

English - 15

Apply a border style and a color to an image

1. Using the directional buttons on the remote control to move to the image whose border style and color you want

to change, move to Mat at the top of the screen, and then press the Select button.

2. Use the directional buttons on the remote control to select the border style and color that you want.

3. Change the border style and color, and then press the Select button to move the focus to the image.

– If you change only the border style, change the border style and then press the Select button to save the

selected border style.

4. To save the selected border style and color, press the Select button again.

– If you press the button to exit, the border style and color you changed are not saved.

Setting up Art mode

In Art mode, use the directional buttons on the remote control to move to the Settings menu item at the bottom. You

can adjust the following functions:

 Color & Brightness

Use the directional buttons on the remote control to move to Modify at the top, and then press the Select button.

In the next screen, adjust the picture color and brightness. After selecting the desired settings, press the Select

button on the remote control.

– To immediately set Color & Brightness while enjoying Art mode, press the button on the remote control.

 Sleep After

If no motion is detected around the TV for the set time, the TV turns off automatically. Use the directional buttons

on the remote control to move to the top items. After selecting the desired time, press the Select button on the

remote control.

 Motion Detector

The sensitivity of the motion detector function can be adjusted. Use the directional buttons on the remote control

to move to the top items. After selecting the desired sensitivity, press the Select button on the remote control.

 Night Mode

When this function is turned on, the TV turns off automatically if no light is detected around the TV. Use the

directional buttons on the remote control to move to the top items, and then turn this function on or off.

English - 16

Remove images from My Collection

You can remove the saved images from My Collection.

1. Use the directional buttons on the remote control to move to My Collection.

2. Use the directional buttons on the remote control to move to Favorites or My Photos.

3. Use the directional buttons on the remote control to move to Options at the top of the screen.

4. Move the focus to Remove, and then press the Select button on the remote control.

5. Use the directional buttons on the remote control to move to an image, and then press the Select button.

– You can select multiple images.

6. Use the directional buttons on the remote control to move to Remove Selected at the top of the screen, and then

press the Select button.

Using Art mode with the SmartThings app

Once you have installed the SmartThings app on your mobile device, you can use the following functions:

You can download the SmartThings app from Google Play Store, Samsung Apps, or the App Store.

– The features or terminology may vary depending on the version of the SmartThings app.

– On tablet devices, Art mode features may not be supported by the SmartThings app.

 Selecting images

 Subscribing to The Art Store Membership

 Creating Collage: Combine multiple images into one image.

 Applying border styles and colors to images

 Setting the color tone and the brightness for Art mode

 Setting Sleep After: When no motion is detected for the time specified in Art mode, the TV turns off automatically.

 Setting Night Mode: Set The Frame to turn off automatically if no light is detected in the room.

 Setting Motion Detector: Set the sensor sensitivity so that the TV turns on automatically when motion is detected

in Art mode.

English - 17

04 The Samsung Smart Remote

About the Buttons on the Samsung Smart Remote

 The images, buttons, and functions of the Samsung Smart Remote may differ depending on the model.

 The Universal Remote function operates normally only when you use the Samsung Smart Remote that comes with

the TV.

(Power)

When watching TV, press to switch

to Art mode. In Art mode, press to

switch to watching TV.

 Press and hold to turn off the TV

completely.

(Number button)

When pressed, a number strip

appears on the bottom of the screen.

Select numbers and then select

Done to enter a numeric value. Use

to change the channel, enter a PIN,

enter a ZIP code, etc.

(Return)

Returns to the previous menu. When

pressed for 1 second or more, the

running function is terminated. When

pressed while you are watching

a program, the previous channel

appears.

(Play/pause)

When pressed, the playback controls

appear while the media content is

playing.

(Smart Hub)

Returns to the Home Screen.

 Press in Art mode to switch to TV

mode.

VOL (Volume)

Move the button up or down to adjust

the volume. To mute the sound,

press the button. When pressed for

1 second or more, the Accessibility

Shortcuts menu appears.

CH (Channel)

Move the button up or down to

change the channel. To see the Guide

screen, press the button.

Launches the app indicated by the

button.

Select

Selects or runs a focused item.

When pressed while you are

watching content, detailed program

information appears.

Directional pad (up/down/left/right)

Moves the focus and changes the

values seen on the TV's menu.

(Bixby)

Runs Bixby. Press and hold the

button, say a command, and then

release the button to run Bixby.

When you press the button, the

Explore Now menu appears at the

bottom of the screen.

 The supported Bixby's languages

and features may differ by

geographical region.

 For more information about Bixby,

refer to Smart Features > Using

Bixby in the e-Manual.

(Color button)

Use these colored buttons to access

additional options specific to the

feature you are using.

 To immediately set Color &

Brightness while enjoying Art

mode, press the button.

English - 18

Pairing the TV to the Samsung Smart Remote

When you turn on the TV for the first time, the Samsung Smart Remote pairs to the TV

automatically. If the Samsung Smart Remote does not pair to the TV automatically,

point it at the remote control sensor of the TV, and then press and hold the buttons

labeled

and as shown in the figure on the left simultaneously for 3 seconds or

more.

Installing batteries into the Samsung Smart Remote

To install the batteries, push the rear cover open in the direction of the arrow at the bottom of the illustration, and

then insert the batteries as shown in the figure. Make sure that the positive and negative ends are facing in the correct

direction. Close the rear cover as shown.

 Alkaline batteries are recommended for longer battery life.

English - 19

05 Initial Setup

When you turn on your TV for the first time, it immediately starts the Initial Setup. Follow the instructions displayed on

the screen and configure the TV's basic settings to suit your viewing environment.

 To perform the Initial Setup using the SmartThings app, you must connect your mobile device via Wi-Fi.

 If the pop-up for setup does not appear automatically in the SmartThings app on your mobile device, manually add

the TV using Add Device on the dashboard of the SmartThings app, and then continue with the set up process.

 The SmartThings app is available for mobile devices running Android 6.0 or higher or iOS 10 or higher.

 Noise may occur temporarily when the TV communicates with mobile devices.

Using the TV Controller

You can turn on the TV with the TV Controller button at the bottom of the TV, and then use the Control menu. The

Control menu appears when the TV Controller button is pressed while the TV is On. For more information about its

usage, refer to the figure below.

Control menu

:

Power Off

:

Volume Up

:

Channel Up

:

Volume Down

:

Channel Down

:

Source

TV Controller button / Remote control sensor

 TV mode

– Press: Move

– Press & Hold: Select

 Art mode

– Press: Switch to the TV mode

The TV Controller button is located on the bottom of the TV.

Motion Sensor

 When you press the TV Controller button, be careful not to press the motion sensor close to it.

 In Art mode, the power indicator at the bottom of the TV remains off.

 After detaching the Customizable Frame (sold separately) from the TV, push up the remote control sensor so that it

returns to its original position.

– Do not push up the remote control sensor strongly. There is a risk of damage.

English - 20

La page charge ...

Samsung QN65LS03RAF Manuel utilisateur

Ce manuel convient également à

Samsung QN65LS03RAF Manuel utilisateur

dans d''autres langues

Documents connexes