Browan Pico Next Guide d'installation

Taper
Guide d'installation
Browan Communications Inc.
No.15-1, Zhonghua Rd.,
Hsinchu Industrial Park,
Hukou, Hsinchu,
Taiwan, R.O.C. 30352
Tel: +886-3-6006899
Fax: +886-3-5972970
1
Pico Next Gateway
User Guide
Document Number
BQW_02_0031.004
Browan Communications Inc.
No.15-1, Zhonghua Rd.,
Hsinchu Industrial Park,
Hukou, Hsinchu,
Taiwan, R.O.C. 30352
Tel: +886-3-6006899
Fax: +886-3-5972970
2
Revision History
Revision
Date
Description
.001
Aug. 19, 2021
Browan first release
.002
Feb. 15, 2022
Add Regulatory and change LED function
.003
Apr. 28, 2022
Add WiFi Station configuration
.004
Aug. 5, 2022
Add Packet Forwarder Whitelist Filter, OpenVPN
Client configuration, and Professional Installation
instructions
Browan Communications Inc.
No.15-1, Zhonghua Rd.,
Hsinchu Industrial Park,
Hukou, Hsinchu,
Taiwan, R.O.C. 30352
Tel: +886-3-6006899
Fax: +886-3-5972970
3
Copyright
© 2021 BROWAN COMMUNICATIONS INC.
This document is copyrighted with all rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language
in any form by any means without the written permission of BROWAN COMMUNICATIONS INC.
Notice
BROWAN COMMUNICATIONS INC. reserves the right to change specifications without prior
notice.
While this manual has been compiled with great care, it may not be deemed as an assurance of
product characteristics. BROWAN COMMUNICATIONS INC. shall be liable only to the degree
specified in the terms of sale and delivery.
The reproduction and distribution of the documentation and software supplied with this product
and the use of its contents are subject to written authorization from BROWAN
COMMUNICATIONS INC.
Trademark
The product described in this document is a licensed product of BROWAN COMMUNICATIONS
INC.
Browan Communications Inc.
No.15-1, Zhonghua Rd.,
Hsinchu Industrial Park,
Hukou, Hsinchu,
Taiwan, R.O.C. 30352
Tel: +886-3-6006899
Fax: +886-3-5972970
4
Regulatory
Federal Communication Commission Statement (FCC, U.S.)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in an installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any
interference received, including interference that may cause
undesired operation.
Radiation Exposure Statement
This device complies with RF radiation exposure limits set forth for an uncontrolled environment. This
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device must operate with a minimum distance of 20 cm between the radiator and user body.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance
could
void the user's authority to operate this equipment
Browan Communications Inc.
No.15-1, Zhonghua Rd.,
Hsinchu Industrial Park,
Hukou, Hsinchu,
Taiwan, R.O.C. 30352
Tel: +886-3-6006899
Fax: +886-3-5972970
5
IC WARNING
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject
to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired
operation of the device
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme Canada limites d'exposition aux radiations dans un environnement
non contrôlé. Cet équipement doit être installé et utilisé à distance minimum de 20cm entre le
radiateur et votre corp.
Browan Communications Inc.
No.15-1, Zhonghua Rd.,
Hsinchu Industrial Park,
Hukou, Hsinchu,
Taiwan, R.O.C. 30352
Tel: +886-3-6006899
Fax: +886-3-5972970
6
Professional Installation Instructions
1. Installation personal
This product is designed for specific applications and needs to be installed by a
qualified person who has RF and related rules knowledge. The general user shall
not attempt to install or change the settings.
2. Installation location
The product shall be installed at a location where the radiating antenna can be kept
20 cm from nearby persons in normal operation conditions to meet regulatory RF
exposure requirements.
3. External antenna
Use only the antennas that have been approved by the applicant. Non-approved
antenna(s) may produce unwanted spurious or excessive RF transmitting power,
which may lead to the violation of FCC/IC limits and is prohibited.
4. Installation procedure
Please refer to user's manual for details.
5. Warning
Please carefully select the installation position and make sure that the final output
power does not exceed the limits set forcth in relevant rules. Violation of the rules
could lead to serious federal penalties.
Browan Communications Inc.
No.15-1, Zhonghua Rd.,
Hsinchu Industrial Park,
Hukou, Hsinchu,
Taiwan, R.O.C. 30352
Tel: +886-3-6006899
Fax: +886-3-5972970
7
Instructions d'installation professionnelle
1. Installation
Ce produit est destine a un usage specifique et doit etre installe par un personnel
qualifie maitrisant les radiofrequences et les regles s'y rapportant. L'installation et
les reglages ne doivent pas etre modifies par l'utilisateur final.
2. Emplacement d'installation
En usage normal, afin de respecter les exigences reglementaires concernant
l'exposition aux radiofrequences, ce produit doit etre installe de facon a respecter
une distance de 20 cm entre l'antenne emettrice et les personnes.
3. Antenn externe.
Utiliser uniiquement les antennes approuvees par le fabricant. L'utilisation d'autres
antennes peut conduire a un niveau de rayonnement essentiel ou non essentiel
depassant les niveaux limites definis par FCC/IC, ce qui est interdit.
4. Procedure d'installation
Consulter le manuel d'utilisation.
5. Avertissement
Choisir avec soin la position d'installation et s'assurer que la puissance de sortie ne
depasse pas les limites en vigueur. La violation de cette regle peut conduire a de
serieuses penalites federales.
Browan Communications Inc.
No.15-1, Zhonghua Rd.,
Hsinchu Industrial Park,
Hukou, Hsinchu,
Taiwan, R.O.C. 30352
Tel: +886-3-6006899
Fax: +886-3-5972970
Table of Contents
Table of Contents
REVISION HISTORY ...................................................................................................................................................... 2
COPYRIGHT ................................................................................................................................................................. 3
NOTICE ....................................................................................................................................................................... 3
TRADEMARK ............................................................................................................................................................... 3
REGULATORY .............................................................................................................................................................. 4
PROFESSIONAL INSTALLATION INSTRUCTIONS ........................................................................................................... 6
1 PRODUCT OVERVIEW ................................................................................................................................... 10
1.1 PRODUCT FEATURES ..................................................................................................................................... 10
1.2 LED FUNCTIONS ............................................................................................................................................ 10
1.3 RESET BUTTON ............................................................................................................................................. 10
1.4 I/O PORTS ..................................................................................................................................................... 11
1.5 ACCESSORIES ................................................................................................................................................ 12
2 INSTALLATION .............................................................................................................................................. 12
2.1 POWER UP .................................................................................................................................................... 12
2.2 DC ADAPTER ................................................................................................................................................. 12
2.3 TERMINAL BLOCK ......................................................................................................................................... 12
2.4 ETHERNET ..................................................................................................................................................... 12
3 GUI ACCESS ................................................................................................................................................... 13
3.1 OPEN ADMIN GUI ......................................................................................................................................... 13
3.2 SYSTEM......................................................................................................................................................... 14
4 ADMINISTRATION ......................................................................................................................................... 14
4.1 RESTORE ....................................................................................................................................................... 14
4.2 SYSTEM FIRMWARE ...................................................................................................................................... 15
5 LORA SETTINGS ............................................................................................................................................. 15
5.1 MODE SELECTION ......................................................................................................................................... 15
5.1.1 Packet Forwarder .................................................................................................................................... 16
5.1.1.1 Gateway Info ..................................................................................................................................... 17
5.1.1.2 Antenna Gain .................................................................................................................................... 17
5.1.1.3 Radio and Channel Settings .............................................................................................................. 18
5.1.1.4 LBT Settings ....................................................................................................................................... 19
5.1.2 Whitelist Filter ......................................................................................................................................... 19
5.1.3 Basic Station ............................................................................................................................................ 20
5.1.3.1 Radio Info .......................................................................................................................................... 21
Browan Communications Inc.
No.15-1, Zhonghua Rd.,
Hsinchu Industrial Park,
Hukou, Hsinchu,
Taiwan, R.O.C. 30352
Tel: +886-3-6006899
Fax: +886-3-5972970
5.1.3.2 Connection Configuration ................................................................................................................. 21
5.2 CHANNEL SCAN............................................................................................................................................. 23
5.3 LOG............................................................................................................................................................... 24
6 NETWORK ..................................................................................................................................................... 24
6.1 WAN ............................................................................................................................................................. 24
6.1.1 WAN Status ............................................................................................................................................. 25
6.1.2 WAN Settings .......................................................................................................................................... 26
6.1.2.1 Ethernet WAN ................................................................................................................................... 26
6.1.2.2 Wireless Station ................................................................................................................................ 27
6.1.2.3 3G/4G LTE ......................................................................................................................................... 27
6.1.2.4 Dual WAN
(Ethernet+3G/4G) ............................................................................................................ 28
6.1.2.5 Dual WAN
(Ethernet+WiFi) ............................................................................................................... 29
6.1.3 3G/4G LTE Log ......................................................................................................................................... 30
6.2 VPN .............................................................................................................................................................. 30
6.2.1 VPN Settings ............................................................................................................................................ 30
6.2.2 VPN Log ................................................................................................................................................... 32
6.3 DIAGNOSTICS ............................................................................................................................................... 33
Browan Communications Inc.
No.15-1, Zhonghua Rd.,
Hsinchu Industrial Park,
Hukou, Hsinchu,
Taiwan, R.O.C. 30352
Tel: +886-3-6006899
Fax: +886-3-5972970
1 Product Overview
1.1 Product Features
The Pico Next Gateway is a LoRa gateway with GPS, using numerous ways of connection:
ethernet, LTE, and Wi-Fi. Depending upon the SKU, some functions might not be available.
Pico Next is specifically designed for wide-area IoT applications. Applications include, but are
not limited to, home security, automatic meter-reading, monitoring fault-indicators, and
monitoring streetlights. This gateway is very suitable for small businesses or private area uses
like at parking lots, exhibition centers, and campuses.
1.2 LED Functions
Constant
Flashing
Off
Power On
Booting /OTA
OFF
Internet
Available
Checking
Internet
RFU
LNS Connected
RFU
LNS Not
Connected
LoRa Working
Initializing
LoRa Not
Working
1.3 Reset Button
Reboot:
By pressing and holding the RESET Button, the Power LED will start flashing. The “reboot”
procedure will be triggered when the RESET Button is released while the Power LED light is
flashing.
Restore to Default:
By pressing and holding the RESET Button, the Power LED will start flashing. The “restore to
default” procedure will be triggered when the RESET Button released after the Power LED
light becomes constant.
Browan Communications Inc.
No.15-1, Zhonghua Rd.,
Hsinchu Industrial Park,
Hukou, Hsinchu,
Taiwan, R.O.C. 30352
Tel: +886-3-6006899
Fax: +886-3-5972970
1.4 I/O Ports
Front Panel
Back Panel -
Functional LEDs
PoE
Terminal Block
DC Jack
LTE SMA
Wi-Fi SMA
GPS SMA
LoRa SMA
Reset Button
SIM Card
Browan Communications Inc.
No.15-1, Zhonghua Rd.,
Hsinchu Industrial Park,
Hukou, Hsinchu,
Taiwan, R.O.C. 30352
Tel: +886-3-6006899
Fax: +886-3-5972970
1.5 Accessories
Different SKUS would provide accessories pertaining to that country or SKU, such as the
adapter plug model and GPS antenna. LTE and Wireless antennas are interchangeable; they
have the same specifications.
*Please note that the GPS antenna needs to be purchased separately.*
Adapter LoRa Antenna LTE and Wi-Fi Antenna GPS Antenna *
2 Installation
2.1 Power up
Power up Pico Next through the following ways.
2.2 DC Adapter
Connect the power adapter provided to the DC jack In. Pico Next will automatically turn on
after powering up.
2.3 Terminal Block
Connect a power supply to Pico Next with a 3-pin pluggable male terminal block.
2.4 Ethernet
Connect a RJ45 Ethernet cable to Power-over-Ethernet In (WAN port). Connect the other end
of the ethernet cable to a passive PoE that ensures a power of 12V / 1.5A DC. Provide power
to the passive PoE.
Browan Communications Inc.
No.15-1, Zhonghua Rd.,
Hsinchu Industrial Park,
Hukou, Hsinchu,
Taiwan, R.O.C. 30352
Tel: +886-3-6006899
Fax: +886-3-5972970
3 GUI Access
3.1 Open Admin GUI
Default mode of Pico Next Gateway is DHCP. Once Pico Next is turned on through plugging in
the DC adapter, it will automatically link to available servers. Pico Next’s IP address can be
found from the DHCP server. Access Pico Next WebUI via the DHCP IP on Chrome. The default
username is “admin” and the password can be found on the back label.
Figure 3.1-A Admin GUI
Figure 3.1-B Admin GUI
Browan Communications Inc.
No.15-1, Zhonghua Rd.,
Hsinchu Industrial Park,
Hukou, Hsinchu,
Taiwan, R.O.C. 30352
Tel: +886-3-6006899
Fax: +886-3-5972970
3.2 System
The System menu consists of the following categories: Administration, Restore and System
Firmware. An introduction of each category will be distinctly stated in individual paragraphs.
4 Administration
Pico Next login password can be configured on this page.
Figure 4-A Router Password
4.1 Restore
Restore the Password Credential, LoRa Setting and Network Setting to the default
configurations.
Figure 4.2-A Restore
Browan Communications Inc.
No.15-1, Zhonghua Rd.,
Hsinchu Industrial Park,
Hukou, Hsinchu,
Taiwan, R.O.C. 30352
Tel: +886-3-6006899
Fax: +886-3-5972970
4.2 System Firmware
Here the current firmware version can be found. Click the "Choose File" button to upload the
newest system firmware. Click the "UPGRADE" button to upgrade the system firmware.
Figure 4.2-A System Firmware
5 LoRa Settings
The LoRa menu consists of the following categories: Mode Selection, Channel Scan and Log.
An introduction of each category will be distinctly stated in individual paragraphs.
5.1 Mode Selection
By default, the LoRa Mode is disabled. Configure the "Packet Forwarder" or "Basic Station" by
using the dropdown list.
Figure 5.1-A LoRa Mode Selection
Browan Communications Inc.
No.15-1, Zhonghua Rd.,
Hsinchu Industrial Park,
Hukou, Hsinchu,
Taiwan, R.O.C. 30352
Tel: +886-3-6006899
Fax: +886-3-5972970
5.1.1 Packet Forwarder
Choose the "Packet Forwarder" option and click the "APPLY" button to Enable the Packet
Forwarder mode. After applying the setting, the "Packet Forwarder" field can be found on the
left menu.
Figure 5.1.1-A LoRa Mode Selection - Packet Forwarder
Figure 5.1.1-B LoRa Mode Selection - Packet Forwarder menu
Browan Communications Inc.
No.15-1, Zhonghua Rd.,
Hsinchu Industrial Park,
Hukou, Hsinchu,
Taiwan, R.O.C. 30352
Tel: +886-3-6006899
Fax: +886-3-5972970
5.1.1.1 Gateway Info
This page is to set up the LoRa configuration including Gateway ID, Server Address, Server
Uplink Port, Server Downlink Port, Keep-Alive Interval, Statistics Display Interval, and Push
Timeout.
Figure 5.1.1.1-A Gateway Info
5.1.1.2 Antenna Gain
This page is to set up the antenna gain of Lora.
Figure 5.1.1.2-A Antenna Gain
Browan Communications Inc.
No.15-1, Zhonghua Rd.,
Hsinchu Industrial Park,
Hukou, Hsinchu,
Taiwan, R.O.C. 30352
Tel: +886-3-6006899
Fax: +886-3-5972970
5.1.1.3 Radio and Channel Settings
This page is to configure the radio 0 and radio 1 configurations of Lora, including Central
Frequency, Channel Status, and Center frequency offset.
Figure 5.1.1.3-A Radio and Channel Settings
Browan Communications Inc.
No.15-1, Zhonghua Rd.,
Hsinchu Industrial Park,
Hukou, Hsinchu,
Taiwan, R.O.C. 30352
Tel: +886-3-6006899
Fax: +886-3-5972970
5.1.1.4 LBT Settings
For some regions (i.e. Japan), the Listen Before Talk (LBT) function is a must. This page is to set
up the LBT configuration of Lora, including LBT Status, RSSI Target, Channel settings.
Figure 5.1.1.4-A LBT Settings
5.1.2 Whitelist Filter
To reduce unnecessary data traffic, this page is to configure the whitelist filter for Packet
Forwarder, including Fport Filter and DevAddr Filter.
Figure 5.1.2-A Whitelist Filter
Browan Communications Inc.
No.15-1, Zhonghua Rd.,
Hsinchu Industrial Park,
Hukou, Hsinchu,
Taiwan, R.O.C. 30352
Tel: +886-3-6006899
Fax: +886-3-5972970
5.1.3 Basic Station
Choose the "Basic Station'' option and click the "APPLY" button to Enable the Basic Station
mode. After applying the setting, the "Basic Station" field can be found on the left menu.
Figure 5.1.3-A LoRa Mode Selection - Basic Station
Figure 5.1.3-B LoRa Mode Selection - Basic Station menu
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33

Browan Pico Next Guide d'installation

Taper
Guide d'installation

dans d''autres langues