Dyna-Glo DGP321CNP-D Manuel utilisateur

Marque: Dyna-Glo

Modèle: DGP321CNP-D

Catégorie: Barbecues

Taper: Manuel utilisateur

Ce manuel convient également à

DGP321SNN-D

Français p.

Español p.

Rev. 08/09/2019

2 BURNER PREMIER

NATURAL GAS GRILL

Model # DGP321SNN / DGP321SNN-D

DGP321CNN / DGP321CNN-D

DGP321GNN / DGP321GNN-D

DGP321MNN / DGP321MNN-D

ATTACH YOUR RECEIPT HERE

Serial Number _____________________________ Purchase Date ______________________

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-877-447-4768, 8:00 a.m. – 4:30 p.m., CST, Monday – Friday or

e-mail us at [email protected].

Français p. 30

Español p. 59

TABLE OF CONTENTS

Safety Information ...................................................................................................................... 3

Package Contents ...................................................................................................................... 5

Hardware Contents .................................................................................................................... 6

Preparation ................................................................................................................................. 6

Assembly Instructions ................................................................................................................ 7

Operation Instructions ................................................................................................................. 19

Care and Maintenance ................................................................................................................. 21

Troubleshooting ........................................................................................................................... 24

Warranty ...................................................................................................................................... 26

Replacement Parts List .............................................................................................................. 27

If you smell gas:

1. Shut off gas to the appliance.

2. Extinguish any open ame.

3. Open lid.

4. If odor continues, keep away from

the appliance and immediately call your

local re department.

1. Do not store or use gasoline or

other ammable liquids or vapors

in the vicinity of this or any other

appliance.

2. An LP (liquid propane) cylinder not

connected for use shall not be stored

in the vicinity of this or any other

appliance.

3. This grill is for outdoor use only

and shall not be used in a building,

garage, under overhangs or any other

enclosed area.

4. Do not leave a lit grill unattended.

Keep children and pets away from the

grill at all times.

WARNING

DANGER

Assembler/Installer: This manual contains important information necessary for the proper

assembly and safe use of this appliance. Read and follow all warnings and instructions before

assembling and using this appliance. Leave these instructions with the consumer.

Consumer/User: Follow all warnings and instructions when using this appliance.

Retain these instructions for future reference.

DANGER

CAUTION

• Do not use in an explosive atmosphere. Keep grill area clear and free from combustible

materials, gasoline and other ammable vapors and liquids.

Please read and understand this entire manual before attempting to assemble, operate or

install the product. If you have any questions regarding the product, please call customer

service at: 1-877-447-4768, 8:00 a.m. – 4:30 p.m., CST, Monday – Friday.

• Never use charcoal or lighter uid with the grill.

• Do not use gasoline, kerosene or alcohol for lighting.

• This grill is not intended to be used in or installed on recreational vehicles and/or boats.

• Always open grill lid slowly and carefully as heat and steam trapped within the grill can burn

you severely.

• Never attempt to operate this grill using propane.

• Always employ a qualied service agency to install all necessary natural gas supply

plumbing, manual shutoff valve, and quick-connect ttings.

SAFETY INFORMATION

This product and the fuels used to operate this product (liquid propane or natural gas), and

the products of combustion of such fuels, can expose you to chemicals including benzene,

which is known to the State of California to cause cancer and reproductive harm.

For more information go to www.p65Warnings.ca.gov

WARNING

SAFETY INFORMATION

• Do not place the grill under overhead

combustible construction or awnings.

Minimum clearance from sides and

back of unit to combustible construction,

36 inches (914.4mm) from sides and

back.

NOTE: The installation must conform

with local codes or, in the absence of

local codes, with either the National

Fuel Gas Code, ANSI Z223.1/NFPA 54,

Natural Gas and Propane Installation

Code, CSA B149.1, or Propane Storage

and Handling Code, B149.2.

•

Do not store or use gasoline or other ammable liquids or vapors in the vicinity of this or any other

appliance. Do not store ammables inside the cart of the grill.

• An LP cylinder shall not be stored in the vicinity of this or any other appliance.

• This grill is for use with natural gas only.

• Never attempt to attach this grill to the self-contained propane system of a boat, camper trailer,

motor home or house.

• Do not attempt to move the grill while it is lit or when it is hot. The casters should be locked when

not moving the grill.

• Do not use the grill unless it is completely assembled and all parts are securely fastened and

tightened.

• Keep all combustible items and surfaces at least 36 inches (91.44 cm) away from the grill at all

times.

• Do not touch metal parts of grill until it has completely cooled (about 45 minutes) to avoid burns,

unless you are wearing protective gear (pot holders, gloves, BBQ mittens, etc…).

• Do not alter this grill in any manner.

• Clean and inspect the hose before each use. If there is evidence of abrasion, wear, cuts, or leaks,

the hose must be replaced prior to operating the appliance. The replacement hose assembly will

be that which is specied by the manufacturer, listed in the repair parts list in this manual.

• Move gas hoses as far away as possible from hot surfaces and dripping hot grease. Never allow

the gas hose to touch heated surfaces.

• Keep the grill’s valve compartment, burners and circulating air passages clean. Inspect the grill

before each use. Do not obstruct the ow of gas or ventilation air.

• The use of alcohol, prescription or non-prescription drugs may impair the operator’s ability to

properly assemble or safely operate the grill.

• Do not leave a lit grill unattended. Keep children and pets away from the grill at all times.

• Do not place this grill on any type of tabletop surface. The grill should be placed on a at and level

surface.

• Do not use the grill in high winds.

WARNING

36in

914.4mm

CAUTION

PACKAGE CONTENTS

J YK

PART DESCRIPTION QTY

A Hood Handle 1

B Temperature Gauge 1

C Grill Body Assembly 1

D Side Shelf Bracket A 2

E Right Side Shelf Assembly 1

F Side Shelf Bracket B 2

G Cart Right Side Panel Assembly 1

H Locking Swivel Caster 2

I Non-Locking Swivel Caster 2

J Cart Bottom Panel Shelf 1

K Bottom Panel Skirt Assembly 1

L Cart Left Side Panel Assembly 1

M Door Assembly 1

PART DESCRIPTION QTY

N Door Handle 1

O Left Side Shelf Assembly 1

P Heat Tent 2

Q Cooking Grate 2

R Warming Rack 1

S Control Knob 2

T Grease Pan 1

U Grease Cup 1

V Upper Front Door Brace 1

W Cart Rear Panel 1

X Door Magnet 2

Y Natural Gas Hose Holder 2

Z Quick Disconnect Coupling 1

HARDWARE CONTENTS

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list on previous page and hardware contents above. If any part is missing or damaged, do

not attempt to assemble the product. Contact customer service for replacement parts.

Estimated Assembly Time: 50 minutes with 2 people.

Tools Required for Assembly and Leak Testing (not included): Phillips screwdriver, Spray bottle

M6x16

Bolt

Qty. 18

M6x12

Flat Bolt

Qty. 8

Shoulder

Bolt

Qty. 4

Plain

Washer

Qty. 2

Spring

Washer

Qty. 2

Wing Nut

Qty. 2

M6x35

Bolt

Qty. 4

M3x10

Bolt

Qty. 4

THIS UNIT IS HEAVY. Two people required for safe assembly.

Two people required for safe assembly. Some parts may contain sharp edges. Wear protective

gloves if necessary. Read and follow all safety statements, warnings, assembly instructions and

use and care instructions before attempting to assemble and use.

HH II JJ

CAUTION

Wrench

Qty. 1

M4x12

Bolt

Qty. 2

Wrench

Hardware Used

ASSEMBLY INSTRUCTIONS

1. Attach the two locking swivel casters (H) and

the two non-locking swivel casters (I) to the

cart left side panel assembly (L) and the cart

right side panel assembly (G) with wrench (II).

Hardware Used

Wrench

2. Attach the cart left side panel assembly (L)

and the cart right side panel assembly (G) to

the cart bottom panel shelf (J) with four M6x16

bolts (AA).

DO NOT TIGHTEN BOLTS AT THIS TIME.

Hardware Used

M6x16 Bolt

x 4

ASSEMBLY INSTRUCTIONS

3. Insert the hook on the bottom panel skirt

assembly (K) into the slot on the cart left side

panel assembly (L) and the cart right side

panel assembly (G) as shown. Attach the

bottom panel skirt assembly (K) to the cart left

side panel assembly (L) and the cart right side

panel assembly (G) with two M6x16 bolts (AA).

Tighten ALL bolts securely from step 2.

Hardware Used

4. Attach the cart rear panel (W) to the cart left

side panel assembly (L) and the cart right side

panel assembly (G) with the four M6x16 bolts

(AA).

L G

Hardware Used

M6x16 Bolt

x 2

x 4

ASSEMBLY INSTRUCTIONS

5. Attach the upper front door brace (V) to the cart

left side panel assembly (L) and the cart right

side panel assembly (G) with four M6x35

bolts (EE).

6. Attach the door magnet (X) to the cart left side

assembly (L) with four M3x10 bolts (FF).

Hardware Used

M6x35 Bolt

x 4

Hardware Used

M3x10 Bolt

x 4

M6x16

Bolt x2

Hardware Used

ASSEMBLY INSTRUCTIONS

8. Insert the bottom hinge pin of the cart bottom

panel skirt (K) into the lower hole on the door

assembly (M), then press the upper door spring

hinge pin into the hole on the upper front door

brace (V) as shown.

7. Attach the door handle (N) to the door

assembly (M) with two M6x16 bolts (AA).

Hardware Used

M6x16 Bolt

x 2

ASSEMBLY INSTRUCTIONS

9. Attach the hood handle (A) to the grill body

assembly (C) with two M6 wing nuts (DD), two

M6 spring washers (CC) and two M6 plain

washers (BB).

10. Remove pre-assembled wing nut and plain

washer from the temp gauge (B), then attach

the temp gauge (B) to the grill body assembly

(C). Secure the temp gauge (B) with wing nut

and plain washer removed earlier in this step.

Hardware Used

M6 Wing Nut

x 2

M6 Spring Washer

x 2

M6 Plain Washer

x 2

ASSEMBLY INSTRUCTIONS

11. Carefully place the grill body (C) onto cart left

side panel assembly (L) and cart right side

panel assembly (G). Adjust the grill body (C)

so that the holes in the grill body (C) are

aligned with holes in the tabs of cart left side

panel assembly (L) and cart right side panel

assembly (G).

Note: Make sure the natural gas hose is inside

the cart. Secure the grill body (C) with four

M6X16 screws (AA).

Hardware Used

M6x16 Bolt

M4x12 Bolt

x 4

12. Pre-assemble two M6x16 bolts (AA) onto the

cart right side panel assembly (G) and do not

tighten them. Make sure to leave a 5mm gap

between the bolt and the panel. Hang the

natural gas hose bracket onto the bolts and

tighten the two bolts. Put two pieces natural

gas hose holders (Y) in to the hose. Attach the

natural gas hose holders (Y) to the bottom shelf

(J) with two M4x12 bolts (JJ). NOTE: Make sure

the natural gas hose exits through the hole in

the cart rear panel (W).

Hardware Used

x 2

M6x16

Bolt x4

Hardware Used

5mm

Hardware Used

M6x10

Flat Bolt

ASSEMBLY INSTRUCTIONS

13. Attach the side shelf bracket A (D) and side

shelf bracket B (F) to the grill body assembly

Hardware Used

M6x12 Flat Bolt

x 8

ASSEMBLY INSTRUCTIONS

14. Attach the left side shelf assembly (O) to the

brackets installed at step 13 with two shoulder

bolts (HH). Repeat it for right side shelf

assembly (E).

Hardware Used

Shoulder Bolt

x 4

ASSEMBLY INSTRUCTIONS

15. Put two heat tents (P) in place over each

burner.

16. Put two cooking grates (Q) and one warming

rack (R) in place.

ASSEMBLY INSTRUCTIONS

17. Put the grease pan (T) and grease cup (U) into

place.

18. Assemble the two control knobs (S) to the

valve stems.

ASSEMBLY INSTRUCTIONS

Front View Rear View

Fully Assembled

• The quick disconnect socket (Z) and supply gas line must be installed by a qualied service agency.

The supply connection must be made in accordance with local codes or, in the absence of local

codes, with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54, in the USA, of the Natural

Gas and Propane Installation Code, CSA B149.1, in Canada.

• A properly sized manual shut-off valve must be installed between the frill and the gas supply piping.

• The grill and its individual shut-off valve must be disconnected from the gas supply piping system

during any pressure testing of that system at test pressures in excess of 0.5 PSI (3.5 kPa).

• The grill must be isolated from the gas supply piping system by closing its individual manual shut-

off valve during any pressure testing of the gas supply piping system at test pressures equal to or

less than 0.5 PSI (3.5 kPa).

• Always connect the exible gas supply hose to the gas supply before opening the manual shutoff

valve.

1. Ensure that the natural gas shut-off valve is closed.

2. Remove the protective rubber caps from the plug

and sleeve ends of the quick disconnect ttings.

Check that the ttings are clean.

3. Retract the sleeve on the coupling as illustrated.

4. Insert the plug and release the sleeve as illustrated.

5. Push the plug into the sleeve until the sleeve snaps

forward to lock the plug in the coupling.

6. Open the natural gas shut-off valve.

1. Close natural gas supply at shut-off valve.

2. Push the sleeve back and gently pull out the plug.

3. Replace the protective rubber caps on the plug and

sleeve ends of the quick disconnect couplings.

CONNECTING THE GRILL TO THE NATURAL GAS SUPPLY

TO CONNECT:

TO DISCONNECT:

Retract Sleeve

Release Sleeve

ASSEMBLY INSTRUCTIONS

CHECKING FOR LEAKS

After all connections are made, check all connections and ttings on the natural gas quick connector,

gas hose and manifold for leaks with a water and soap solution.

To prevent re or explosion while testing for a leak:

• Always perform leak test prior to lighting the grill.

• Do not smoke while testing for a leak.

• Always perform leak tests outdoors in a well-ventilated area.

• Do not use any source of ame while testing for leaks.

• Do not use the grill until any and all leaks are corrected.

• If you are unable to correct a leak, close the natural gas shut-off and call a gas appliance service

agency.

PERFORM LEAK TEST

• Prepare leak test solution by combining 1 part liquid dish soap with 3 parts water.

Total solution required is approximately 2 - 3 ounces (70 - 90 ml).

Put leak test solution in a spray bottle.

• Ensure all control knobs are in the ‘OFF’ position.

• Connect the gas hose to the gas supply.

• Open the gas shut-off valve.

• Spray leak test solution on all gas carrying connections and ttings. Presence of bubbles at areas

of applied test solution indicates a gas leak. If leaks are detected or you smell or hear gas, shut off

the gas supply valve immediately and repair or replace the defective part. Do not use the grill until all

leaks are corrected.

ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE FOLLOWED TO

PREVENT FIRE, DAMAGE AND/OR INJURY.

In the connection process, make sure:

• The gas supply hose does not come in contact or remain in contact with the rebox.

Only use the hose assembly provided! If a replacement is necessary, please call

our customer service center. Do not use replacement parts that are not intended for this grill.

WARNING

CAUTION

OPERATION INSTRUCTIONS

Lighting The Grill

Before rst use:

Remove all hangings or plastic straps, if present. Before you cook on your new gas grill, it is important

to clean your grill with heat. To do this, operate the grill for approximately 15 minutes with the lid closed

and the control knob in the highest position. This will clean the internal parts by burning off any residue

and odor from the manufacturing process.

Do not lean over grill when lighting. Read instructions before lighting. Do not put pots on the

sear side burner. Using pots on the sear side burner will result in high carbon monoxide levels.

If the ame extinguishes accidentally during ignition or operation, immediately TURN OFF the

natural gas shut-off valve and then TURN OFF the control knob.

WARNING

CAUTION

1. Check that the control knobs are in the OFF position.

2. Open natural gas supply at shut-off valve.

3. Open the lid during the lighting process.

4. Depress and turn the control knob counter-clockwise from the OFF position, past the ignite

position, to the HIGH position. You may need to repeat this several times to ignite the burner.

If ignition does not occur in 5 seconds, turn the control knob(s) to the OFF position, wait 5 minutes, and

repeat the lighting procedure.

If the burner still does not light, check that the natural gas shut-off valve is open and follow the match

lighting instructions. Check the Troubleshooting Guide on page 24 for more information.

OPERATION INSTRUCTIONS

LIGHTING THE GRILL WITH A MATCH

1. Open the lid.

2. Insert a match in the end of the match holder that is installed on the inside of the cabinet door.

3. Light the match.

4. Immediately place the lit match through the spaces in the grill gates near the ports of the burner

between the heat tents as shown. Make sure the lit match is close to the burner ports.

5. Press in the control knob that operates the burner and rotate counter-clockwise to High

position and burner should light immediately.

6. Repeat 2~5 steps to lighting the remaining burners.

7. Adjust burners to desired cooking settings.

SHUTDOWN INSTRUCTIONS

1. Turn control knobs clockwise to the O OFF position.

2. Close natural gas shut-off valve.

3. Close lid.

Turn off natural gas shut-off valve when appliance is not in use.

Make sure all burners controls are off except for the burner being lit and the

burners that have been lit.

Main Burner Match Lighting

If ignition does not occur in 5 seconds, turn the control knob(s) to “O” OFF position, wait 5

minutes, and repeat the lighting procedure.

WARNING

CAUTION

La page charge ...

Dyna-Glo DGP321CNP-D Manuel utilisateur

Marque: Dyna-Glo

Modèle: DGP321CNP-D

Catégorie: Barbecues

Taper: Manuel utilisateur

Ce manuel convient également à

DGP321SNN-D

Télécharger le PDF

rapport

dans d''autres langues

English: Dyna-Glo DGP321CNP-D User manual
español: Dyna-Glo DGP321CNP-D Manual de usuario

Dyna-Glo DGP321CNP-D Manuel utilisateur

Ce manuel convient également à

Dyna-Glo DGP321CNP-D Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents