Philips MCD177/79 Manuel utilisateur

Catégorie
Lecteurs DVD
Taper
Manuel utilisateur
MCD177
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
1
Quick Start Guide
Quick Start GuideAV cables (Y/W/R)
Remote control with
battery
Power adaptor FM antenna
2
User Manual
User Manual
Remove the plastic
protective sheet
MCD177_58_QSG_Eng 3/12/08, 16:321
speaker
(right)
speaker
(left)
FM wire antenna
Power adaptor
Y PB PR
Tip
See the User Manual for other TV
connection options.
Setting up the TV
1
2
3
1
2
Press SOURCE (DISC on the remote control) to select disc source.
Turn on the TV and set it to the correct Video In channel.
Y PB PR
A To hear the sound of this DVD Player
through your TV, use the audio cables (white/
red, supplied) to connect LINE OUT (L/R)
jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV.
B To listen to TV through this system, use a
cinch cable (not supplied) to connect AUX
IN jack (3.5mm) to the corresponding
AUDIO OUT jacks on the TV set.
A
Y PB PR
Connect the speaker cables.
Connect the FM antenna.
Connect the composite video cable (yellow, supplied) to a TV.
Connect the power cords of the system and TV.
4
Notes for the remote control:
First, select the source you wish to control by
pressing one of the source select keys on the
remote control (DISC or FM for example).
Then select the desired function ( 2;, í,
ë for example).
MCD177_58_QSG_Eng 3/12/08, 16:322
Setting the clock
1
2
4
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support
progressive signals or the video cables are not connected accordingly, see the user manual
for proper progressive scan setup or deactivate the progressive scan feature as below:
1) Turn off your TV progressive scan mode then turn on to interlaced mode.
2) Select “OFF” in PROGRESSIVE menu of the system setup menu to turn off progressive
scan, then press SYSTEM MENU on the remote to exit the system menu.
Tip
See chapters "Preparations" and "System Menu Options" in the User
Manual for detailed descriptions.
– – Audio Setup Page – –
NIGHT MODE
DIGITAL Output
Dolby Digital Setup
5
Press DISPLAY/CLOCK agian to store the setting.
In standby mode, press and hold DISPLAY/CLOCK. The clock digits flash on
the display panel.
Press TUNING à / á (or à / á on the remote control) to set the
hours.
Press í/
ë to set the minutes.
Press PROG to select between 12 hour and 24 hour display.
– – Preference Page – –
Audio
Subtile
Disc Menu
Parental
Password
Divx Subtitle
Default
3
MCD177_58_QSG_Eng 3/12/08, 16:323
Playing a disc
Programming and tuning to radio stations
1
2
3
Press SOURCE (FM on the remote control) to select tuner source.
Press PROG for more than two seconds to program all available stations in order of
waveband.
Press í/
ë until the desired preset station is displayed.
1
2
3
Press OPEN•CLOSE 0 to open the disc door and load in a disc, then press
the same button again to close the disc door.
Make sure the label side of the disc is facing up.
Playback will start automatically. If not pressÉÅ.
To stop playback, press 9.
1
2
3
Insert the USB device’s USB plug into the socket on the front panel of the main set.
Press SOURCE (or USB on the remote control) once or more to select USB.
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players
(USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
Play the USB’s audio files as you do with the albums/tracks on a CD.
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
PDCC-JH-0811
C Royal Philips Electronics N.V. 2008
All rights reserved.
http://www.philips.com
MCD177_58_QSG_Eng 3/12/08, 16:324
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Philips MCD177/79 Manuel utilisateur

Catégorie
Lecteurs DVD
Taper
Manuel utilisateur

dans d''autres langues