Sony CDX-R3350C Manuel utilisateur

Catégorie
Récepteurs multimédia de voiture
Taper
Manuel utilisateur
Wichtig!
Bitte nehmen Sie sich etwas Zeit, um den Geräte-Pass vollständig
auszufüllen. Dieser befindet sich auf der hinteren Umschlagseite dieser
Bedienungsanleitung.
Si dichiara che l’apparecchio è stato fabbricato in conformità all’art. 2, Comma l del D.M. 28.08.
1995 n. 548.
For installation and connections, see the supplied installation/connections manual.
Zur Installation und zum Anschluss siehe die mitgelieferte Installations-/Anschlussanleitung.
En ce qui concerne l’installation et les connexions, consulter le manuel d’installation/
raccordement fourni.
Per l’installazione e i collegamenti, fare riferimento al manuale di istruzioni per
l’installazione e i collegamenti in dotazione.
Zie voor het monteren en aansluiten van het apparaat de bijgeleverde handleiding "Installatie
en aansluitingen".
CDX-R3350C
CDX-R3350
CDX-R3350C/R3350
2-515-510-21 (1)
Operating Instructions
Bedienungsanleitung
Mode d’emploi
Istruzioni per l’uso
Gebruiksaanwijzing
2-515-510-21 (1)
© 2005 Sony Corporation
GB
DE
FR
IT
NL
H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\00GB+00COV-
EUR.fm
masterpage:Right
FM
/
MW
/
LW
Compact Disc Player
2
CDX-R3350C/R3350
2-515-510-21 (1)
H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB01INT-EUR.fm masterpage:Left
Welcome !
Thank you for purchasing this Sony Compact
Disc Player. You can enjoy your drive with the
following functions.
CD playback:
You can play CD-DA (also containing CD
TEXT*), CD-R/CD-RW (MP3 files also
containing Multi Session (
page 14)) and
ATRAC CD (ATRAC3 and ATRAC3plus
format (
page 14)).
Radio reception:
You can store up to 6 stations per band (FM1,
FM2, FM3, MW and LW).
BTM (Best Tuning Memory) function: the
unit selects strong signal stations and stores
them.
•RDS services:
You can use FM station with Radio Data
System (RDS).
Optional unit operation (CDX-R3350C only)
You can also control optional CD/MD
changers, in addition to playing with this unit.
* A CD TEXT disc is a CD-DA that includes
information such as disc, artist and track name.
About this manual
This manual explains the functions of 2 units,
CDX-R3350C and CDX-R3350.
The table below shows the differences between
the 2 units. It is also described in each section
(example, “CDX-R3350C only”).
SonicStage and its logo are trademarks of Sony
Corporation.
ATRAC, ATRAC3, ATRAC3plus and their logos
are trademarks of Sony Corporation.
Type of discs Label on the disc
CD-DA
MP3
ATRAC CD
CDX-R3350C CDX-R3350
Changer control z
Key illumination colour
switches
z
Audio output terminal
(front)
z
Warning if your car’s ignition has no
ACC position
After turning the ignition off, be sure to press
and hold (OFF) on the unit until the display
disappears.
Otherwise, the display does not turn off and
this causes battery drain.
This label is located on the bottom of the
chassis.
3
CDX-R3350C/R3350
2-515-510-21 (1)
H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\00GB+00COV-
EURTOC.fm
masterpage:Right
Table of Contents
Getting Started
Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 4
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 4
DEMO mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Detaching the front panel . . . . . . . . . . . . . . . . . 4
Attaching the front panel . . . . . . . . . . . . . . . 4
Inserting the disc in the unit . . . . . . . . . . . . . . . 5
Ejecting the disc . . . . . . . . . . . . . . . . . . . . . . 5
Location of controls and basic
operations
Main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Card remote commander RM-X151 . . . . . . 6
CD
Display items . . . . . . . . . . . . . . . . . . . . . . . . 8
Repeat and shuffle play . . . . . . . . . . . . . . . . 8
Radio
Storing and receiving stations . . . . . . . . . . . . . . 8
Storing automatically — BTM . . . . . . . . . . 8
Storing manually . . . . . . . . . . . . . . . . . . . . . 8
Receiving the stored stations . . . . . . . . . . . . 8
Tuning automatically . . . . . . . . . . . . . . . . . . 8
RDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Setting AF and TA/TP . . . . . . . . . . . . . . . . . 9
Selecting PTY . . . . . . . . . . . . . . . . . . . . . . 10
Setting CT . . . . . . . . . . . . . . . . . . . . . . . . . 10
Other functions
Changing the sound settings. . . . . . . . . . . . . . 10
Adjusting the sound characteristics
— BAL/FAD/SUB . . . . . . . . . . . . . . . . . . 10
Adjusting the equalizer curve — EQ3 . . . 10
Adjusting setup items — SET . . . . . . . . . . . . 11
Using optional equipment. . . . . . . . . . . . . . . . 11
CD/MD changer . . . . . . . . . . . . . . . . . . . . 11
Rotary commander RM-X4S . . . . . . . . . . 12
Additional Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Notes on discs . . . . . . . . . . . . . . . . . . . . . . 13
About MP3 files . . . . . . . . . . . . . . . . . . . . 14
About ATRAC CD . . . . . . . . . . . . . . . . . . 14
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Removing the unit. . . . . . . . . . . . . . . . . . . . . . 15
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 16
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 17
Error displays/Messages . . . . . . . . . . . . . . 18
4
CDX-R3350C/R3350
2-515-510-21 (1)
H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:Left
Getting Started
Resetting the unit
Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Detach the front panel and press the RESET
button with a pointed object, such as a ballpoint
pen.
Note
Pressing the RESET button will erase the clock setting
and some stored contents.
Setting the clock
The clock uses a 24-hour digital indication.
1 Press and hold (SEL).
The setup display appears.
2 Press (SEL) repeatedly until “CLOCK-
ADJ” appears.
3 Press (DSPL ) .
The hour indication flashes.
4 Press the volume +/– button to set the
hour and minute.
To move the digital indication, press (DSPL).
5 Press (SEL).
The clock starts and the next setup display
appears.
6 Press and hold (SEL).
The setup is complete.
To display the clock, press (DSPL). Press
(DSPL) again to return to the previous display.
Tip
You can set the clock automatically with the RDS
feature (
page 10).
With the card remote commander
In step 4, to set the hour and minute, press M or m.
DEMO mode
When the unit is turned off, the clock is
displayed first, then demonstration (DEMO)
mode starts the demonstration display.
To cancel the DEMO mode, set “DEMO-OFF
in setup (
page 11) while the unit is turned off.
Detaching the front panel
You can detach the front panel of this unit to
prevent theft.
Caution alarm
If you turn the ignition switch to the OFF
position without detaching the front panel, the
caution alarm will sound for a few seconds.
The alarm will only sound if the built-in
amplifier is used.
1 Press (OFF).
The unit is turned off.
2 Press , then pull it off towards you.
Notes
Do not drop or put excessive pressure on the front
panel and display window.
Do not subject the front panel to heat/high
temperature or moisture. Avoid leaving it in a parked
car or on a dashboard/rear tray.
Tip
When carrying the front panel, use the supplied front
panel case.
Attaching the front panel
Engage part A of the front panel with part B of
the unit, as illustrated, and push the left side into
position until it clicks.
Note
Do not put anything on the inner surface of the front
panel.
RESET
button
(OFF)
B
A
5
CDX-R3350C/R3350
2-515-510-21 (1)
H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:RightH:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:Right
Inserting the disc in the
unit
1 Open the shutter.
2 Insert the disc label side up.
Playback starts.
3 Close the shutter.
Ejecting the disc
1 Open the shutter.
2 Push down the shutter until it clicks.
The disc is ejected.
Notes
While ejecting or inserting the disc, do not close the
shutter. The disc may be caught and damaged.
The disc may be ejected if you open the shutter
forcefully.
Tip
The disc can be played with the shutter opened or
closed.
x
x
Click
6
CDX-R3350C/R3350
2-515-510-21 (1)
H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:Left
Location of controls and basic operations
Main unit
Card remote commander RM-X151
ATT OFF
SOURCE MODE
SEL
SEEK
123456
SENS
REP BTM LIST
GP/DISC
+
SHUF
PTYAF/TA
DSPL
DIM
EQ3
OPEN
SEEK
12 3 4 5 6 7 8
CDX-R3350C
9 0 qaqs qd qf qg qh qj qk
OFF
DSPL
SCRL
SEL
SOURCE
MODE
132
465
ATT
VOL
+
+
2
3
7
0
qa
qs
ws
ql
w;
wd
wa
7
CDX-R3350C/R3350
2-515-510-21 (1)
H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:RightH:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:Right
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
a Volume +/– button
To adjust volume.
b ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
c DSPL (display)/DIM (dimmer) button
4, 8, 12
To change display items (press); change the
display brightness (press and hold).
d OPEN shutter, disc slot (located behind
the shutter)
5
e Display window
f EQ3 (equalizer) button 10
To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW
AGE, ROCK,
CUSTOM or OFF).
g OFF button
To power off/stop the source.
h SEEK +/– button
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
i (front panel release) button 4
j SOURCE button
To power on/change the source (Radio/CD/
MD*
1
).
k MODE button 8, 11
To select the radio band (FM/MW/LW)/
select the unit*
2
.
l SEL (select) button 4, 10, 11, 12
To select items.
m RESET button (located behind the front
panel) 4
n Number buttons
Radio:
To receive stored stations (press); store
stations (press and hold).
CD/MD*
1
:
(1)/(2): GP*
3
/DISC*
2
–/+
To skip groups (press); skip groups
continuously (press and hold).
(3): REP 8
(4): SHUF 8
o SENS/BTM button 8
To improve weak reception: LOCAL/MONO
(press); start the BTM function (press and
hold).
p AF (Alternative Frequencies)/TA
(Traffic Announcement) button 9
To set AF and TA/TP in RDS.
q PTY (Programme Type)/LIST button
10
To select PTY in RDS; list up.
r Receptor for the card remote
commander
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
s < (.)/, (>) buttons
To control radio/CD, the same as (SEEK)
+/– on the unit. (For details of other
operations, see “With the card remote
commander” on each pages.)
t VOL (volume) +/– button
To adjust volume.
u M (+)/m (–) buttons
To control CD, the same as (1)/(2) –/+ on
the unit. (For details of other operations, see
“With the card remote commander” on each
pages.)
v SCRL button 8
To scroll the display item.
w Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 When an MD changer is connected. (CDX-R3350C
only)
*2 When a CD/MD changer is connected. (CDX-
R3350C only)
*3 When an MP3/ATRAC CD is played and a changer
is not connected. If the changer is connected, the
operation is different, see page 11.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 15.
8
CDX-R3350C/R3350
2-515-510-21 (1)
H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:Left
CD
For details on connecting to a CD/MD changer,
see
page 11 (CDX-R3350C only).
Display items
A Source
B Track number/Elapsed playing time,
Disc/artist name, Group number*
1
,
Group name, Track name, Text
information*
2
, Clock
*1 Group number is displayed only when the group is
changed.
*2 When playing an MP3, ID3 tag is displayed and
when playing a ATRAC CD, text information written
by SonicStage, etc. is displayed.
To change display items B, press (DSPL);
scroll display items B, press (SCRL) on the
card remote commander or set “A.SCRL-ON”
(
page 11).
Tip
Displayed item will differ, depending on the disc type
and recorded format. For details on MP3, see
page 14; ATRAC CD, see page 14.
Repeat and shuffle play
1 During playback, press (3) (REP) or
(4) (SHUF) repeatedly until the
desired setting appears.
* When an MP3/ATRAC CD is played.
To return to normal play mode, select “REP-
OFF” or “SHUF-OFF.
Radio
Storing and receiving
stations
Caution
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
Storing automatically — BTM
1 Press (SOURCE) repeatedly until
“TUNER” appears.
To change the band, press (MODE)
repeatedly. You can select from FM1, FM2,
FM3, MW or LW.
2 Press and hold (BTM) until “BTM”
flashes.
The unit stores stations in order of frequency
on the number buttons.
A beep sounds when the setting is stored.
Storing manually
1 While receiving the station that you
want to store, press and hold a
number button ((1) to (6)) until
“MEM” appears.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previous stored station will be replaced.
Tip
When a RDS station is stored, the AF/TA setting is
also stored (
page 9).
Receiving the stored stations
1 Select the band, then press a number
button ((1) to (6)).
With the card remote commander
To select preset stations, press M or m.
Tuning automatically
1 Select the band, then press (SEEK) +/
to search for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Tip
If you know the frequency of the station you want to
listen to, press and hold (SEEK)
+/ to locate the
approximate frequency, then press (SEEK)
+/
repeatedly to fine adjust to the desired frequency
(manual tuning).
Select To play
REP-TRACK track repeatedly.
REP-GP* group repeatedly.
SHUF-GP* group in random order.
SHUF-DISC disc in random order.
A
B
9
CDX-R3350C/R3350
2-515-510-21 (1)
H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:RightH:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:Right
RDS
Overview
FM stations with Radio Data System (RDS)
service send inaudible digital information along
with the regular radio programme signal.
Display items
A Radio band, Function
B Frequency*
1
(Station name), Clock,
RDS data
C TA/TP*
2
*1 While receiving the RDS station, “ * is displayed
on the left of the frequency indication.
*2 “TA” flashes during traffic information. “TP” lights
up while such a station is received.
To change display items B, press (DSPL).
RDS services
This unit automatically provides RDS services as
follows:
Notes
Depending on the country/region, not all RDS
functions may be available.
RDS will not work if the signal strength is too weak,
or if the station you are tuned to is not transmitting
RDS data.
Setting AF and TA/TP
1 Press (AF/TA) repeatedly until the
desired setting appears.
Storing RDS stations with the AF and
TA setting
You can preset RDS stations along with the AF/
TA setting. If you use the BTM function, only
RDS stations are stored with the same AF/TA
setting.
If you preset manually, you can preset both RDS
and non-RDS stations with the AF/TA setting for
each.
1 Set AF/TA, then store the station with BTM or
manually.
Presetting the volume of traffic
announcements
You can preset the volume level of the traffic
announcements so as to not miss hearing them.
1 Press the volume +/– button repeatedly to
adjust the volume level.
2 Press and hold (AF/TA) until “TA” appears.
Receiving emergency
announcements
With AF or TA on, the emergency
announcements will automatically interrupt the
currently selected source.
Staying with one regional
programme — REG
When the AF function is on: this units factory
setting restricts reception to a specific region, so
you will not be switched to another regional
station with a stronger frequency.
If you leave this regional programme’s reception
area, set “REG-OFF” in setup (
page 11).
Note
This function does not work in the UK and in some
other areas.
Local Link function (UK only)
This function enables you to select other local
stations in the area, even if they are not stored on
your number buttons.
AF (Alternative
Frequencies)
Selects and retunes the
station with the strongest
signal in a network. By
using this function, you can
continuously listen to the
same programme during a
long-distance drive without
having to retune the same
station manually.
TA (Traffic
Announcement)/
TP (Traffic
Programme)
Provides current traffic
information/programmes.
Any information/
programme received, will
interrupt the currently
selected source.
PTY (Programme
Types)
Displays the currently
received programme type.
Also searches your selected
programme type.
CT (Clock Time) The CT data from the RDS
transmission sets the clock.
ABC
Select To
AF-ON activate AF and deactivate TA.
TA-ON activate TA and deactivate AF.
AF, TA-ON activate both AF and TA.
AF, TA-OFF deactivate both AF and TA.
continue to next page t
10
CDX-R3350C/R3350
2-515-510-21 (1)
H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:Left
1 During FM reception, press a number button
((1) to (6)) on which a local station is stored.
2 Within 5 seconds, press again a number button
of the local station.
Repeat this procedure until the local station is
received.
Selecting PTY
1 Press (PTY) during FM reception.
The current programme type name appears if
the station is transmitting PTY data.
2 Press (PTY) repeatedly until the
desired programme type appears.
3 Press (S EEK) +/–.
The unit starts to search for a station
broadcasting the selected programme type.
With the card remote commander
In step 2, to select the programme type, press M or m.
Type of programmes
Note
You cannot use this function in countries/regions
where no PTY data is available.
Setting CT
1 Set “CT-ON” in setup (page 11).
Notes
The CT function may not work even though an RDS
station is being received.
There might be a difference between the time set by
the CT function and the actual time.
Other functions
Changing the sound
settings
Adjusting the sound
characteristics — BAL/FAD/SUB
You can adjust the balance, fader and subwoofer
volume.
1 Press (SEL) repeatedly until “BAL,
“FAD” or “SUB” appears.
The item changes as follows:
LOW*
1
t MID*
1
t HI*
1
t
BAL (left-right) t FAD (front-rear) t
SUB (subwoofer volume)*
2
*1 When EQ3 is activated (page 10).
*2 When the audio output is set to “SUB”
(page 11).
“ATT” is displayed at the lowest setting, and can
be adjusted up to 20 steps.
2 Press the volume +/– button
repeatedly to adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Note
Adjust within 3 seconds of selecting the item.
With the card remote commander
In step 2, to adjust the selected item, press <, M, ,
or m.
Adjusting the equalizer curve
— EQ3
You can adjust and store the equalizer settings
for different tone ranges.
1 Select a source, then press (EQ3)
repeatedly to select the EQ3 type.
2 Press (SEL) repeatedly until “LOW,
“MID” or “HI” appears.
3 Press the volume +/– button
repeatedly to adjust the selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
Repeat steps 2 and 3 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold (SEL ) before the setting is
complete.
NEWS (News), AFFAIRS (Current Affairs),
INFO (Information), SPORT (Sports),
EDUCATE (Education), DRAMA (Drama),
CULTURE (Culture), SCIENCE (Science),
VARIED (Varied), POP
M (Popular Music),
ROCK
M (Rock Music), EASY M (Easy
Listening), LIGHT
M (Light Classical),
CLASSICS (Classical), OTHER
M (Other
Music Type), WEATHER (Weather),
FINANCE (Finance), CHILDREN (Children’s
Programmes), SOCIAL
A (Social Affairs),
RELIGION (Religion), PHONE
IN (Phone In),
TRAVEL (Travel), LEISURE (Leisure), JAZZ
(Jazz Music), COUNTRY (Country Music),
NATION
M (National Music), OLDIES (Oldies
Music), FOLK
M (Folk Music), DOCUMENT
(Documentary)
11
CDX-R3350C/R3350
2-515-510-21 (1)
H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:RightH:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:Right
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
With the card remote commander
In step 3, to adjust the selected item, press <, M, ,
or m.
Adjusting setup items
— SET
1 Press and hold (SEL).
The setup display appears.
2 Press (SEL) repeatedly until the
desired item appears.
3 Press the volume +/– button to select
the setting (example “ON” or “OFF”).
4 Press and hold (SEL).
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
With the card remote commander
In step 3, to select the setting, press < or ,.
The following items can be set (follow the page
reference for details):
z” indicates the default settings.
*1 When the unit is turned off.
*2 When FM is received.
*3 When the audio output is set to “SUB.
Using optional equipment
CD/MD changer
(CDX-R3350C only)
Selecting the changer
1 Press (SOURCE) repeatedly until “CD” or
“MD” appears.
2 Press (MODE) repeatedly until the desired
changer appears.
Playback starts.
Skipping groups and discs
1 During playback press (1)/(2) (GP/DISC)
–/+.
CLOCK-ADJ
(Clock Adjust)
(page 4)
CT (Clock
Time)
To set “CT-ON” or “CT-OFF”
(
z) (page 9, 10).
BEEP To set “BEEP-ON” (
z) or
“BEEP-OFF.
SUB/REAR*
1
To switch the audio output.
–“SUB (
z): to output to a
subwoofer.
“REAR”: to output to a
power amplifier.
DIM (Dimmer) To change the brightness of the
display.
“DIM-ON”: to dim the
display.
“DIM-OFF” (
z): to
deactivate the dimmer.
ILM-1/ILM-2
(Illumination)
(CDX-R3350C
only)
To change the illumination
colour.
“ILM-1”: Green
“ILM-2” (
z): Amber
DEMO*
1
(Demonstration)
To set “DEMO-ON” (z) or
“DEMO-OFF” (page 4).
A.SCRL
(Auto Scroll)
To scroll long displayed items
automatically when the group/
track is changed.
A.SCRL-ON”: to scroll.
A.SCRL-OFF” (
z): to not
scroll.
REG*
2
(Regional)
To setREG-ON (z) or
“REG-OFF” (page 9).
LPF*
3
(Low
Pass Filter)
To select the cut-off frequency
“78HZ,” “125HZ” or “OFF”
(
z).
To skip Press (1)/(2)
group and release (hold for a
moment).
group
continuously
within 2 seconds of first
releasing.
discs repeatedly.
discs
continuously
then, press again within 2
seconds and hold.
continue to next page t
Disc numberUnit number
12
CDX-R3350C/R3350
2-515-510-21 (1)
H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:Left
Repeat and shuffle play
1 During playback, press (3) (REP) or (4)
(SHUF) repeatedly until the desired setting
appears.
*1 When one or more CD/MD changers are
connected.
*2 When one or more CD changers, or two or more
MD changers are connected.
To return to normal play mode, select “REP-
OFF” or “SHUF-OFF.
Tip
“SHUF-ALL will not shuffle tracks between CD units
and MD changers.
Labelling a disc
(CDX-R3350C only)
When you play a disc in a CD changer with the
CUSTOM FILE function, you can label each
disc with a custom name up to 8 characters (Disc
Memo).
If you label a disc, the name appears on the list.
1 While playing a disc that you want to label,
press and hold (LIST).
2 Press the volume +/– button repeatedly until
the desired character appears.
To move the digital indication, press (SEL) .
A y B y C ... y 0 y 1 y 2 ... y +
y y ... y (blank space) y A
Repeat this operation until the entire name is
entered.
3 Press and hold (LIST).
The labelling is complete and the display
returns to the normal play mode.
To display the name, press (DSPL) during
playback.
Tips
To correct or erase a character, overwrite or enter
.”
The Disc Memo always takes priority over any
prerecorded title.
You can label a disc on the unit if a changer with the
CUSTOM FILE function is connected.
“REP-TRACK” and all shuffle play are suspended
until the labelling is complete.
With the card remote commander
In step 2, to select the character, press M or m.
Deleting the custom name
1 Select the unit that has stored the custom name
you want to delete, then press and hold
(LIST).
2 Press and hold (DSPL).
The stored name will flash.
3 Press the volume +/– button repeatedly to
select the name you want to delete.
4 Press and hold (SEL).
The name is deleted. Repeat Step 3 and 4 to
delete other names.
5 Press and hold (LIST).
The unit returns to normal play mode.
With the card remote commander
In step 3, to select the name, press M or m.
Locating a disc by name — list-up
You can select a disc from the list when
connecting a CD changer with the CUSTOM
FILE function or an MD changer.
If you assign a name to a disc, the name appears
on the list.
1 During playback, press (LIST).
The disc number or disc name appears.
2 Press (LIST) repeatedly until the desired disc
appears.
After 5 seconds, the unit returns to normal
play mode.
3 Press (SEEK) +/– to play the disc.
With the card remote commander
In step 2, to select the disc, press M or m.
Rotary commander RM-X4S
Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
Select To play
REP-DISC*
1
disc repeatedly.
SHUF-
CHGR*
1
tracks in the changer in random
order.
SHUF-ALL*
2
tracks in all units in random
order.
S
E
L
DSPL
MODE
S
E
L
D
S
P
L
M
O
D
E
13
CDX-R3350C/R3350
2-515-510-21 (1)
H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:RightH:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:Right
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on this unit.
The following controls on the rotary commander
require a different operation from the unit.
PRESET control
To select preset stations; control CD, the same
as (1)/(2) –/+ on the unit (push in and rotate).
VOL (volume) control
The same as the volume +/– button on the unit
(rotate).
• SEEK/AMS control
The same as (SEEK) +/– on the unit (rotate, or
rotate and hold).
Changing the operative direction
The operative direction of the controls is factory-
set as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
1 While pushing the VOL control, press and
hold (SOUND).
Additional Information
Precautions
If your car has been parked in direct sunlight,
allow the unit to cool off before operating it.
Power aerial will extend automatically while
the unit is operating.
Moisture condensation
On a rainy day or in a very damp area, moisture
condensation may occur inside the lenses and
display of the unit. Should this occur, the unit
will not operate properly. In such a case, remove
the disc and wait for about an hour until the
moisture has evaporated.
To maintain high sound quality
Be careful not to splash juice or other soft drinks
onto the unit or discs.
Notes on discs
To keep a disc clean, do not touch its surface.
Handle the disc by its edge.
Keep your discs in their cases or disc
magazines when not in use.
Do not subject discs to heat/high temperature.
Avoid leaving them in a parked car or on a
dashboard/rear tray.
Do not attach labels, or use discs with sticky
ink/residue. Such discs may stop spinning
when used, causing a malfunction, or may ruin
the disc.
Do not use any discs with labels or stickers
attached.
The following malfunctions may result from
using such discs:
Inability to eject a disc (due to a label or
sticker peeling off and jamming the eject
mechanism).
Inability to read audio data correctly (e.g.,
playback skipping, or no playback) due to
heat shrinking of a sticker or label causing a
disc to warp.
Discs with non-standard shapes (e.g., heart,
square, star) cannot be played on this unit.
Attempting to do so may damage the unit. Do
not use such discs.
You cannot play 8 cm CDs.
OFF
ATT
SEL
SOURCE
DSPL
MODE
OFF
VOL
SEEK/AMS
PRESET
To increase
To decrease
continue to next page t
14
CDX-R3350C/R3350
2-515-510-21 (1)
H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:Left
Before playing, clean the
discs with a commercially
available cleaning cloth. Wipe
each disc from the centre out.
Do not use solvents such as
benzine, thinner,
commercially available
cleaners, or antistatic spray
intended for analogue discs.
Notes on CD-R/CD-RW discs
Some CD-Rs/CD-RWs (depending on the
equipment used for its recording or the
condition of the disc) may not play on this unit.
You cannot play a CD-R/a CD-RW that is not
finalized.
Music discs encoded with copyright
protection technologies
This product is designed to play back discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
copyright protection technologies are marketed
by some record companies. Please be aware that
among those discs, there are some that do not
conform to the CD standard and may not be
playable by this product.
About MP3 files
MP3, which stands for MPEG-1 Audio Layer-3,
is a music file compression format standard. It
compresses audio CD data to approximately 1/10
of its original size.
The unit is compatible with the ISO 9660 level
1/level 2 format, Joliet/Romeo in the expansion
format, ID3 tag version 1.0, 1.1, 2.2, 2.3 and
2.4, and Multi Session.
The maximum number of:
folders (groups): 150 (including root and
empty folders).
MP3 files (tracks) and folders contained in a
disc: 300 (if a folder/file names contain many
characters, this number may become less than
300).
displayable characters for a folder/file name
is 32 (Joliet), or 32/64 (Romeo); ID3 tag is
15/30 characters (1.0, 1.1, 2.2 and 2.3), or 63/
126 characters (2.4).
Playback order of MP3 files
Notes
Be sure to finalize the disc before using on the unit.
When naming an MP3 file, be sure to add the file
expansion “.mp3” to the file name.
If you play a high-bit-rate MP3, such as 320 kbps,
sound may be intermittent.
During playback of a VBR (variable bit rate) MP3 file
or fast-forward/reverse, elapsed playing time may
not display accurately.
When the disc is recorded in Multi Session, only the
first track of the first session format is recognized
and played (any other format is skipped). The
priority of the format is CD-DA, ATRAC CD and
MP3.
– When the first track is a CD-DA, only CD-DA of the
first session is played.
– When the first track is not a CD-DA, an ATRAC CD
or MP3 session is played. If the disc has no data in
any of these formats, “NO MUSIC” is displayed.
About ATRAC CD
ATRAC3plus format
ATRAC3, which stands for Adaptive Transform
Acoustic Coding3, is audio compression
technology. It compresses audio CD data to
approximately 1/10 of its original size.
ATRAC3plus, which is an extended format of
ATRAC3, compresses the audio CD data to
approximately 1/20 of its original size. The unit
accepts both ATRAC3 and ATRAC3plus format.
ATRAC CD
ATRAC CD is recorded audio CD data which is
compressed to ATRAC3 or ATRAC3plus format
using authorized software, such as SonicStage
2.0 or later, or SonicStage Simple Burner.
The maximum number of:
folders (groups): 255
files (tracks): 999
The characters for a folder/file name and text
information written by SonicStage is displayed.
For details on ATRAC CD, see the SonicStage or
SonicStage Simple Burner manual.
Folder
(group)
MP3 file
(track)
MP3
15
CDX-R3350C/R3350
2-515-510-21 (1)
H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:RightH:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:Right
Note
Be sure to create the ATRAC CD using authorized
software, such as SonicStage 2.0 or later, or
SonicStage Simple Burner 1.0 or 1.1, which are
supplied with Sony Network products.
If you have any questions or problems
concerning your unit that are not covered in this
manual, consult your nearest Sony dealer.
Maintenance
Replacing the lithium battery of the
card remote commander
Under normal conditions, the battery will last
approximately 1 year. (The service life may be
shorter, depending on the conditions of use.)
When the battery becomes weak, the range of the
card remote commander becomes shorter.
Replace the battery with a new CR2025 lithium
battery. Use of any other battery may present a
risk of fire or explosion.
Notes on the lithium battery
Keep the lithium battery out of the reach of children.
Should the battery be swallowed, immediately
consult a doctor.
Wipe the battery with a dry cloth to assure a good
contact.
Be sure to observe the correct polarity when
installing the battery.
Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
Fuse replacement
When replacing the fuse, be
sure to use one matching the
amperage rating stated on the
original fuse. If the fuse
blows, check the power
connection and replace the
fuse. If the fuse blows again
after replacement, there may
be an internal malfunction. In
such a case, consult your
nearest Sony dealer.
Cleaning the connectors
The unit may not function properly if the
connectors between the unit and the front panel
are not clean. In order to prevent this, detach the
front panel (page 4) and clean the connectors
with a cotton swab dipped in alcohol. Do not
apply too much force. Otherwise, the connectors
may be damaged.
Notes
For safety, turn off the ignition before cleaning the
connectors, and remove the key from the ignition
switch.
Never touch the connectors directly with your fingers
or with any metal device.
Removing the unit
1 Remove the protection collar.
1 Detach the front panel (page 4).
2 Engage the release keys together with the
protection collar.
3 Pull out the release keys to remove the
protection collar.
1
2
x
+ side up
WARNING
Battery may explode if mistreated.
Do not recharge, disassemble, or dispose of
in fire.
Fuse (10A)
continue to next page t
Main unit Back of the front panel
Orient the release
keys as shown.
16
CDX-R3350C/R3350
2-515-510-21 (1)
H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:Left
2 Remove the unit.
1 Insert both release keys simultaneously
until they click.
2 Pull the release keys to unseat the unit.
3 Slide the unit out of the mounting.
Specifications
CD Player section
Signal-to-noise ratio: 120 dB
Frequency response: 10 – 20,000 Hz
Wow and flutter: Below measurable limit
Tuner section
FM
Tuning range: 87.5 – 108.0 MHz
Aerial terminal: External aerial connector
Intermediate frequency: 10.7 MHz/450 kHz
Usable sensitivity: 9 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono)
Harmonic distortion at 1 kHz: 0.5 % (stereo),
0.3 % (mono)
Separation: 35 dB at 1 kHz
Frequency response: 30 – 15,000 Hz
MW/LW
Tuning range:
MW: 531 – 1,602 kHz
LW: 153 – 279 kHz
Aerial terminal: External aerial connector
Intermediate frequency: 10.7 MHz/450 kHz
Sensitivity: MW: 30 µV, LW: 40 µV
Power amplifier section
Outputs: Speaker outputs (sure seal connectors)
Speaker impedance: 4 – 8 ohms
Maximum power output: 50 W × 4 (at 4 ohms)
General
Outputs:
Audio outputs terminal (front (CDX-R3350C
only), sub/rear switchable)
Power aerial relay control terminal
Power amplifier control terminal
Inputs:
BUS control input terminal (CDX-R3350C only)
BUS audio input terminal (CDX-R3350C only)
Telephone ATT control terminal
Remote controller input terminal
Aerial input terminal
Tone controls:
Low: ±10 dB at 60 Hz (XPLOD)
Mid: ±10 dB at 1 kHz (XPLOD)
High: ±10 dB at 10 kHz (XPLOD)
Power requirements: 12 V DC car battery
(negative earth)
Dimensions: Approx. 178 × 50 × 179 mm (w/h/d)
Mounting dimensions: Approx. 182 × 53 × 161 mm
(w/h/d)
Mass: Approx. 1.2 kg
Supplied accessories:
Card remote commander: RM-X151
Parts for installation and connections (1 set)
Front panel case (1)
Optional accessories/equipment:
Rotary commander: RM-X4S
CDX-R3350C only:
BUS cable (supplied with an RCA pin cord):
RC-61 (1 m), RC-62 (2 m)
CD changer (10 discs): CDX-757MX
CD changer (6 discs): CDX-T70MX, CDX-T69
MD changer (6 discs): MDX-66XLP
Source selector: XA-C30
AUX-IN selector: XA-300
Note
This unit cannot be connected to a digital preamplifier
or an equalizer which is Sony BUS system compatible.
Design and specifications are subject to change
without notice.
Lead-free solder is used for soldering certain parts.
(more than 80 %)
Halogenated flame retardants are not used in the
certain printed wiring boards.
Halogenated flame retardants are not used in
cabinets.
VOC (Volatile Organic Compound)-free vegetable oil
based ink is used for printing the carton. (CDX-
R3350 only)
Packaging cushions do not use polystyrene foam.
Hook facing
inwards.
US and foreign patents licensed from Dolby
Laboratories.
17
CDX-R3350C/R3350
2-515-510-21 (1)
H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:RightH:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:Right
Troubleshooting
The following checklist will help you remedy
problems you may encounter with your unit.
Before going through the checklist below, check
the connection and operating procedures.
General
No power is being supplied to the unit.
Check the connection. If everything is in order,
check the fuse.
If the unit is turned off and the display
disappears, it cannot be operated with the
remote commander.
t Turn on the unit.
The power aerial does not extend.
The power aerial does not have a relay box.
No sound.
The volume is too low.
The ATT function is activated, or the Telephone
ATT function (when the interface cable of a car
telephone is connected to the ATT lead) is
activated.
The position of the fader control (FAD) is not
set for a 2-speaker system.
The CD changer is incompatible with the disc
format (MP3/ATRAC CD)
*.
t Play back with a Sony MP3 compatible CD
changer, or this unit.
No beep sound.
The beep sound is cancelled (page 11).
An optional power amplifier is connected and
you are not using the built-in amplifier.
The contents of the memory have been
erased.
The RESET button has been pressed.
t Store again into the memory.
The power connecting lead or battery has been
disconnected.
The power connecting lead is not connected
properly.
Stored stations and correct time are erased.
The fuse has blown.
Makes noise when the position of the
ignition key is switched.
The leads are not matched correctly with the
cars accessory power connector.
The display disappears from/does not
appear in the display window.
The dimmer is set “DIM-ON”(page 11).
The display disappears if you press and hold
(OFF).
t Press and hold (OFF) again until the
display appears.
The connectors are dirty (page 15).
* CDX-R3350C only
CD/MD
*
playback
The disc is automatically ejected.
The disc has trouble.
t Check the following;
The disc cannot be loaded.
Another disc is already loaded.
The disc has been forcibly inserted upside
down or in the wrong way.
The disc does not playback.
Defective or dirty disc.
The CD-Rs/CD-RWs are not for audio use
(page 14).
MP3 files cannot be played back.
The disc is incompatible with the MP3 format
and version (page 14).
MP3 files take longer to play back than
others.
The following discs take a longer time to start
playback.
a disc recorded with a complicated tree
structure.
a disc recorded in Multi Session.
a disc to which data can be added.
The ATRAC CD cannot play.
The disc is not created by authorized software,
such as SonicStage or SonicStage Simple
Burner.
Tracks that are not included in the group cannot
be played.
The display items do not scroll.
For discs with very many characters, those may
not scroll.
A.SCRL” is set to off.
t Press (SCRL) on the card remote
commander or set A.SCRL-ON”
(page 11).
The sound skips.
Installation is not correct.
t Install the unit at an angle of less than
45° in a sturdy part of the car.
Defective or dirty disc.
The operation buttons do not function.
The disc will not eject.
Press the RESET button (page 4).
* CDX-R3350C only
continue to next page t
18
CDX-R3350C/R3350
2-515-510-21 (1)
H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:Left
Error displays/Messages
Radio reception
The stations cannot be received.
The sound is hampered by noises.
Connect a power aerial control lead (blue) or
accessory power supply lead (red) to the power
supply lead of a cars aerial booster (only when
your car has built-in FM/MW/LW aerial in the
rear/side glass).
Check the connection of the car aerial.
The auto aerial will not go up.
t Check the connection of the power aerial
control lead.
Check the frequency.
Preset tuning is not possible.
Store the correct frequency in the memory.
The broadcast signal is too weak.
Automatic tuning is not possible.
Setting of the local seek mode is not correct.
t Tuning stops too frequently:
Press (SENS) until “LOCAL-ON” appears.
t Tuning does not stop at a station:
Press (SENS) repeatedly until “MONO-
ON” or “MONO-OFF” (FM), or “LOCAL-
OFF” (MW/LW) appears.
The broadcast signal is too weak.
t Perform manual tuning.
During FM reception, the “ST” indication
flashes.
Tune in the frequency accurately.
The broadcast signal is too weak.
t Press (SENS) to set the monaural reception
mode to “MONO-ON.
An FM programme broadcast in stereo is
heard in monaural.
The unit is in monaural reception mode.
t Press (SENS) untill “MONO-OFF” appears.
RDS
The SEEK starts after a few seconds of
listening.
The station is non-TP or has weak signal.
t Deactivate TA (page 9).
No traffic announcements.
Activate TA (page 9).
The station does not broadcast any traffic
announcements despite being TP.
t Tune in another station.
PTY displays “- - - - - - - -.
The current station is not an RDS station.
RDS data has not been received.
The station does not specify the programme
type.
BLANK*
1
*
3
Tracks have not been recorded on the MD*
2
.
t Play an MD with recorded tracks.
ERROR*
1
The disc is dirty or inserted upside down.*
2
t Clean or insert the disc correctly.
The disc cannot play because of some problem.
t Insert another disc.
FAILURE
The speaker/amplifier connection is incorrect.
t See the supplied installation/connections
manual to check the connection.
LOAD*
3
The changer is loading the disc.
t Wait until loading is complete.
L.SEEK +/–
The local seek mode is on during automatic
tuning.
NO AF
There is no alternative frequency for the current
station.
t Press (SEEK) +/– while the station name is
flashing. The unit starts searching for another
frequency with the same PI (Programme
Identification) data (“PI SEEK” appears).
NO DATA*
3
All custom names have been deleted, or none are
stored.
NO DISC*
3
The disc is not inserted in the CD/MD changer.
t Insert discs in the changer.
NO ID3
ID3 tag information is not written in the MP3
file.
NO INFO
Text information is not written in the ATRAC3/
ATRAC3plus file.
NO MAG*
3
The disc magazine is not inserted in the CD
changer.
t Insert the magazine in the changer.
NO MUSIC
The disc is not a music file.
t Insert a music CD in this unit or MP3
playable changer
*
3
.
NO NAME
A track/group/disc name is not written in the
track.
NO TP
The unit will continue searching for available TP
stations.
19
CDX-R3350C/R3350
2-515-510-21 (1)
H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:RightH:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm masterpage:Right
*1 If an error occurs during playback of a CD or MD,
the disc number of the CD or MD does not appear
in the display.
*2 The disc number of the disc causing the error
appears in the display.
*3 CDX-R3350C only
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
If you take the unit to be repaired because of CD
playback trouble, bring the disc that was used at
the time the problem began.
NOT READ*
3
The disc information has not been read by the
unit.
t Loading the disc, then select it on the list.
NOTREADY*
3
The lid of the MD changer is open or the MDs
are not inserted properly.
t Close the lid or insert the MDs properly.
OFFSET
There may be an internal malfunction.
t Check the connection. If the error indication
remains on in the display, consult your
nearest Sony dealer.
READ
The unit is reading all track and group
information on the disc.
t Wait until reading is complete and playback
starts automatically. Depending on the disc
structure, it may take more than a minute.
RESET
The CD unit and CD/MD changer*
3
cannot be
operated because of some problem.
t Press the RESET button (page 4).
” or “
During fast-forward or reverse, you have reached
the beginning or the end of the disc and you
cannot go any further.
The character cannot be displayed with the unit.
2
CDX-R3350C/R3350
2-515-510-21 (1)
H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\02DE01INT-EUR.fm masterpage:Left
Willkommen!
Danke, dass Sie sich für diesen CD-Player von
Sony entschieden haben. Mit diesem Gerät
stehen Ihnen im Auto die folgenden Funktionen
zur Verfügung.
CD-Wiedergabe:
Wiedergabe von CD-DAs (auch solche mit CD
TEXT*), CD-Rs/CD-RWs (MP3-Dateien, auch
auf Multisession-CDs (
Seite 15)) sowie
ATRAC-CDs (ATRAC3- und ATRAC3plus-
Format (
Seite 16)).
Radioempfang:
Für jeden Frequenzbereich (FM1 (UKW1),
FM2 (UKW2), FM3 (UKW3), MW und LW)
können Sie bis zu 6 Sender speichern.
BTM-Funktion (Best Tuning Memory -
Speicherbelegungsautomatik): Das Gerät
wählt die Sender mit den stärksten Signalen
aus und speichert diese.
RDS-Funktionen:
Sie können die RDS-Dienste von UKW-
Sendern nutzen, die RDS-Signale (Radio Data
System) ausstrahlen.
Bedienung eines gesondert erhältlichen Geräts
(nur CDX-R3350C)
Sie können nicht nur die Wiedergabe mit
diesem Gerät, sondern auch gesondert
erhältliche CD/MD-Wechsler steuern.
* Eine CD mit CD TEXT ist eine CD-DA, die
Informationen wie den Namen der CD, den Namen
des Interpreten und die Namen der Titel enthält.
Hinweise zu dieser Anleitung
In dieser Anleitung werden die Funktionen von 2
Geräten, CDX-R3350C und CDX-R3350,
erläutert.
In der Tabelle unten sind die Unterschiede
zwischen den 2 Geräten aufgeführt. Auf die
Unterschiede wird auch in den entsprechenden
Abschnitten hingewiesen (z. B. „nur CDX-
R3350C“).
SonicStage und das entsprechende Logo sind
Markenzeichen der Sony Corporation.
ATRAC, ATRAC3, ATRAC3plus und die
entsprechenden Logos sind Markenzeichen der
Sony Corporation.
CD-Typ Beschriftung auf der CD
CD-DA
MP3
ATRAC-CD
CDX-R3350C CDX-R3350
Steuern eines Wechslers z
Wechseln der Farbe der
Tastenbeleuchtung
z
Audioausgang (vorne) z
Warnhinweis, wenn die Zündung Ihres
Fahrzeugs nicht über eine
Zubehörposition (ACC oder I) verfügt
Nachdem Sie die Zündung ausgeschaltet
haben, halten Sie am Gerät unbedingt (OFF)
gedrückt, bis die Anzeige ausgeblendet wird.
Andernfalls wird die Anzeige nicht
ausgeschaltet und der Autobatterie wird
Strom entzogen.
Dieses Etikett befindet sich an der Unterseite
des Gehäuses.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100

Sony CDX-R3350C Manuel utilisateur

Catégorie
Récepteurs multimédia de voiture
Taper
Manuel utilisateur