LG L330-DP Le manuel du propriétaire

Marque: LG

Modèle: L330-DP

Catégorie: Équipement musical supplémentaire

Taper: Le manuel du propriétaire

OWNER'S MANUAL

Color Video Camera

Please read this manual carefully before operating

your set and retain it for future reference.

P/NO : MFL67260105(A)

MODEL

L330-DN

L330-DP

L330 Series

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other. A ground-

ing type plug has two blades and a third grounding prong. The wide blade

or the third prong are provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for replacement of the obso-

lete outlet.

10. Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury from tip-

over.

13. Unplug this apparatus during lightning storms or when unused for long

periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled or objects have fallen into

the apparatus, the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

Power Supply

This camera must always be operated a DC 12 V Certified/Listed, class 2 power

supply only.

Handling of the unit

Be careful not to spill water or other liquids on the unit. Be cautious not to get

combustible or metallic material inside the body. If used with foreign matter

inside, the camera is liable to fail or to get cause of fire or electric shock.

Remove dust or dirt on the surface of the lens with a blower.•

Use a dry soft cloth to clean the body. If it is very dirty, use a cloth damp-•

ened with a small quantity of neutral detergent then wipe dry.

Avoid the use of volatile solvents such as thinners, alcohol, benzene and •

insecticides.

They may damage the surface finish and/or impair the operation of the

camera.

Operating and storage location

Avoid viewing a very bright object (such as light fittings) during an extended

period. Avoid operating or storing the unit in the following locations.

Extremely hot or cold places (operating temperature •

-10 °C to 50 °C, however, we recommend that the unit be used within a

temperature range of 0 °C to 45 °C)

Damp or dust place•

Places exposed to rain•

Places subject to strong vibration•

Close to generators of powerful electromagnetic •

radiation such as radio or TV transmitters.

Specication

ITEM L330-DP L330-DN

Signal System PAL NTSC

Total Pixels No./

Effective Pixels No.

610 000 Pixels / 570 000

Pixels

520 000 Pixels / 480 000

Pixels

Image Device

6 mm CCD

Signal Process Sony Effio-E

Lens CS Mount (C Mount using adaptor ring)

IRIS Control ALC / ELC

Sync. System Internal

Scanning Frequency

(H/V)

15.625 kHz / 50 Hz 15.734 kHz / 59.94 Hz

Horizontal Resolution

650 TV Lines

S/N Ratio 50 dB

Minimum Illumination 0.1 lx (F1.2, 30 IRE)

Video Output Signal 1 Vp-p Composite (75 Ω)

Day & Night

Digital (Auto / Day / Night)

ITEM L330-DP L330-DN

Backlight OFF / BLC / HLC

DNR 2D-DNR

Electronic Shutter

Speed

1/50 to 1/10 000 1/60 to 1/10 000

White Balance

ATW / PUSH / USER1 / USER2 / ANTI CR / MANUAL

/ PUSH LOCK

Power Source DC 12 V

Power Consumption

140 mA

Operation Temp. -10 ºC to 50 ºC

Storage Temp. -20 ºC to 60 ºC

Operation Humidity 0 % RH to 80 % RH

Storage Humidity 0 % RH to 85 % RH

Weight

305 g

Dimension (H x V x D) 61.5 mm x 67.54 mm x 134 mm

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equi-

lateral triangle is intended to alert the user to the presence

of uninsulated dangerous voltage within the product’s

enclosure that may be of sufficient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the product.

FCC WARNING: This equipment may generate or use radio frequency energy.

Changes or modifications to this equipment may cause harmful interference

unless the modifications are expressly approved in the instruction manual. The

user could lose the authority to operate this equipment if an unauthorized

change or modification is made.

REGULATORY INFORMATION: FCC Part 15

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the equip-

ment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful inter-

ference in which case the user will be required to correct the interference at his

own expense.

A suitable conduit entries, knock-outs or glands shall be provided in the •

cable entries of this product in the end user.

Caution: Danger of explosion if battery is incorrectly replaced. Replaced •

only with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s instructions.

Holes in metal, through which insulated wires pass, shall have smooth well •

rounded surfaces or shall be provided with brushings.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du

Canada.

Warning: Do not install this equipment in a confined space such as a bookcase

or similar unit.

Warning: Wiring methods shall be in accordance with the National Electric

Code, ANSI/NFPA 70.

Warning: This is a class A product. In a domestic environment this product

may cause radio interference in which case the user may be required to take

adequate measures.

Warning: To reduce a risk of fire or electric shock, do not expose this product to

rain or moisture.

Caution: This installation should be made by a qualified service person and

should conform to all local codes.

Caution: To avoid electrical shock, do not open the cabinet. Refer servicing to

qualified personnel only.

Caution: The apparatus shall not be exposed to water (dripping or splashing)

and no objects filled with liquids, such as vases, shall be placed on the appara-

tus.

To disconnect power from mains, pull out the mains cord plug. When install-

ing the product, ensure that the plug is easily accessible.

LG Electronics hereby declares that this/these product(s) is/

are in compliance with the essential requirements and other

relevant provisions of Directive 2004/108/EC, 2006/95/EC,

and 2009/125/EC.

European representative :

LG Electronics Service Europe B.V.

Veluwezoom 15, 1327 AE Almere,

The Netherlands (Tel : +31-(0)36-547-8888)

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to

a product it means the product is covered by the European

Directive 2002/96/EC.

2. All electrical and electronic products should be disposed of

separately from the municipal waste stream via designated

collection facilities appointed by the government or the

local authorities.

3. The correct disposal of your old appliance will help prevent

potential negative consequences for the environment and

human health.

4. For more detailed information about disposal of your old

appliance, please contact your city office, waste disposal

service or the shop where you purchased the product.

EEE Compliance with Directive. (for Turkey only)

Install the camera and mounting

bracket securely.

<FRANÇAIS> Installez solidement la caméra et le support de montage.

<ITALIANO> Montare la videocamera alla staffa in maniera sicura.

<ČEŠTINA> Připevněte řádně kameru a mechanismus pro uchycení.

Zamontować dokładnie kamerę oraz wspornik

montażowy.

<ESPAÑOL> Monte la cámara y el soporte.

Zet de camera en de montagebeugel stevig vast.

<PORTUGUÊS> Instale a câmera e o suporte de montagem firmemente.

Install the C or CS mount type lens.

C mount type

CS mount type

<FRANÇAIS> Installez l’objectif à monture C ou CS.

<ITALIANO> Installare un obiettivo di tipo C o CS.

<ČEŠTINA> Nainstalujte připevňovací čočky typu C nebo CS.

<POLSKI> Mailować obiektyw typu C lub CS.

<ESPAÑOL> Instale un objetivo C o CS.

Monteer een C-mount- of CS-mount-objectief (‘lens’).

<PORTUGUÊS> Instale as lentes de montagem do tipo C ou CS.

Install the camera and mounting arm.

<FRANÇAIS> Installez la caméra et le bras de montage.

<ITALIANO> Montare la videocamera al braccio.

<ČEŠTINA> Připevněte kameru a připevňovací rameno.

<POLSKI> Zamontować kamerę oraz ramię montażowe.

<ESPAÑOL> Monte la cámara y el brazo de soporte.

Monteer de camera en de montagearm.

<PORTUGUÊS> Instale a câmera e o braço de montagem.

Loosen the flange-back fixing screws.

Use the flange-back adjusting ring to

obtain a focused point.

<FRANÇAIS>

Desserrez les vis de fixation de la face d’appui. Utilisez la bague

d’ajustement de la face d’appui pour obtenir un point ciblé.

Allentare le viti di fissaggio posteriori della flangia. Usare l’anello

di regolazione posteriore della flangia per ottenere un punto di

messa a fuoco.

<ČEŠTINA>

Povolte šrouby zajišťující flange-back (vzdálenost objektivu a

snímače). K zaostření použijte kroužek pro úpravu vzdálenosti

flange-back.

Poluzować śruby mocowania kołnierza. Aby uzyskać punkt ogni-

skowania należy użyć pierścienia regulacyjnego kołnierza.

<ESPAÑOL>

Afloje los tornillos de fijación de fijación de distancia focal.

Utilice el anillo de ajuste de distancia focal para obtener un

punto enfocado.

Draai de flange-back bevestigingsschroeven los. Gebruik

de flange-back instelring om op een bepaald punt scherp

te stellen.

<PORTUGUÊS>

Solte os parafusos de fixação da flange. Use a flange aju-

stando o anel para obter um ponto focado.

Installation Guide

Connect the display device.

<FRANÇAIS> Branchez l’écran de visualisation.

<ITALIANO> Collegare il dispositivo del display.

<ČEŠTINA> Připojte zobrazovací zařízení.

<POLSKI> Podłącz wyświetlacz.

<ESPAÑOL> Conecte el dispositivo de visualización

Sluit het weergave-apparaat aan.

<PORTUGUÊS> Ligue o visor.

Connect to the 12 V DC UL Listed, Class

2 Power Supply only on the camera.

<FRANÇAIS>

Branchez exclusivement à l’alimentation électrique de

l’unité CC 12 V certifiée UL, classe 2.

Collegare ad alimentazione di energia a CC 12 V UL indi-

cata, Classe 2 solo sull’unità.

<ČEŠTINA>

Připojte pouze ke schválenému zdroji napájení DC 12 V

UL, Třída 2.

Podłącz do zasilania DC 12 V UL Listed, klasy 2 jedynie z

urządzenia.

<ESPAÑOL>

Conecte a la alimentación eléctrica de 12 VCD en lista UL,

de Clase 2 sólo en la unidad.

Sluit de camera alleen aan op 12 V gelijkstroom UL listed,

klasse 2.

<PORTUGUÊS>

Ligue ao DC 12 V UL listado, fornecimento de energia

Classe 2 apenas na unidade.

Pin layout for the lens iris output

connector.

No. DC type lenses

A Damping -

B Damping +

C Drive +

D Drive -

OSD Menu control buttons

BUTTON Description

Used to move upper direction on the menu screen. Use

this button to select an item or adjust the parameters.

DOWN

Used to move lower direction on the menu screen. Use

this button to select an item or adjust the parameters.

RIGHT

Moves the cursor to the right. Used to increment the

value selected in the menu. The parameter changes

each time this button is pressed.

LEFT

Moves the cursor to the left. Used to decrement the

value selected in the menu. The parameter changes

each time this button is pressed.

SET

Executes selections and displays a submenu for an item

with the

mark.

Connection Guide Additional Information

LG L330-DP Le manuel du propriétaire

Marque: LG

Modèle: L330-DP

Catégorie: Équipement musical supplémentaire

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: LG L330-DP Owner's manual

LG L330-DP Le manuel du propriétaire

LG L330-DP Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents