EN

ESB-1080

Installation Guide

Table of Contents

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê1

1.1. About the Modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê1

1.2. Setup Text File Creation Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê1

2. Preparation of Setup Text File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê2

2.1. Creating a Setup Text File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê2

4.3. Hotel mode settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê6

1. Introduction

1.1. About the Modes

The ESB-1080 unit has different functions depending on the intended use.

It features two Install Modes: Conference Mode or Hotel Mode, and is started in Conference Mode by default.

Refer to this Installation Guide for instructions on the various settings of Conference Mode, as well as changing

to Hotel Mode.

1.1.1. Conference Mode

Conference Mode is optimized for installation in business conferences or meeting spaces.

It is used for sound amplification within teleconferencing or video presentations.

Sound processing is optimized for teleconference software applications.

Creation Tool (ESB_ConferenceHotelMode_Setup.xlsm).

Loading the Setup Text File to this unit allows each Install mode’s functions to be customized.

Unzip the downloaded file and use the dedicated tool (ESB_ConferenceHotelMode_Setup.xlsm), included with

this Installation Guide in the same folder.

1. Introduction

ESB-1080 Installation Guide | 1

2. Preparation of Setup Text File

2.1. Creating a Setup Text File

To make the desired settings, use the dedicated tool (ESB_ConferenceHotelMode_Setup.xlsm) to create a Setup

Text File.

Microsoft Office Excel ® (2007 or later) is required to use this tool.

Enter the desired settings in the cells in the red frame and click the "Create a Setup Text File" button.

2. Preparation of Setup Text File

2 | ESB-1080 Installation Guide

3. Install Mode Operation

3.1. Changing Install Mode settings

In order to reflect the settings in the unit, it is necessary to re-enter the Install Mode with a USB memory device

containing the Setup Text File connected to the [UPDATE ONLY] jack of the unit, after releasing the Install Mode.

If you have already released Install Mode, go to step 2.

1. Cancel the Install Mode using the remote control.

a. Set the unit to standby mode. Make sure that the main unit LED is not lit.

b. Press the remote control’s [DIMMER] button, VOLUME [-] button, VOLUME [-] button and [Mute]

button in that order within three seconds.

Make sure that the main unit indicators light as follows.

2. Connect the USB memory containing the Setup Text File to the [UPDATE ONLY] jack of the unit.

3. Enable the Install Mode by using the remote control.

a. Make sure that the unit is in standby status.

even if the electrical outlet is connected or disconnected.

Note

ESB-1080 Installation Guide | 3

4. Mode Specifications

4.1. Function limitations of remote control in Install Mode

When using the ESB-1080 unit in Conference mode or Hotel mode, some remote control functions are disabled.

The table below shows the enabled and disabled functions within these modes:

4. Mode Specifications

4 | ESB-1080 Installation Guide

Note

• The ENABLED/DISABLED setting of the BLUETOOTH button conforms to the setting of Bluetooth

Note

• When the Turn on Volume is set to 0, the volume before power off is maintained.

• In Conference mode, we recommend that you disable the surround function (default setting) to

• Set the Bluetooth Name using ASCII code (letters, numbers, symbols) within 13 characters.

4. Mode Specifications

ESB-1080 Installation Guide | 5

4.3. Hotel mode settings

You can change any of the Hotel mode settings (below) within the Setup Text File.

Note

4. Mode Specifications

6 | ESB-1080 Installation Guide