Dell Latitude D531 spécification

www.dell.com | support.dell.com

Dell™ Latitude™ D531

Quick Reference Guide

Model PP04X

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

Abbreviations and Acronyms

For a complete list of abbreviations and acronyms, see the Glossary in your

User’s Guide

.

If you purchased a Dell™ n Series computer, any references in this document to Microsoft

®

Windows

®

operating systems are not applicable.

NOTE: Some features or media may be optional and may not ship with your computer. Some features or media may not

be available in certain countries.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, Latitude, and ExpressCharge are trademarks of Dell Inc.; AMD is a trademark of Advanced Micro

Devices, Inc.; Microsoft, Outlook, and Windows are registered trademarks of Microsoft Corporation. Windows Vista and the Windows Vista Start

button are trademarks of Microsoft Corporation.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.

Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Model

PP04X

April 2007 P/N JP596 Rev. A00

Contents 3

Contents

Finding Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Setting Up Your Computer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

About Your Computer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Using a Battery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

4 Contents

Quick Reference Guide 5

Finding Information

NOTE: Some features or media may be optional and may not ship with your computer. Some features or media may

not be available in certain countries.

NOTE: Additional information may ship with your computer.

What Are You Looking For? Find It Here

• A diagnostic program for my computer

• Drivers for my computer

• My device documentation

• Notebook System Software (NSS)

Drivers and Utilities Media

NOTE: The Drivers and Utilities media may be optional and

may not ship with your computer.

Documentation and drivers are already installed on your

computer. You can use the media to reinstall drivers and to

run the Dell Diagnostics (see "Dell Diagnostics" on page 17).

Readme files may be

included on your media to

provide last-minute updates

about technical changes to

your computer or advanced

technical-reference material

for technicians or

experienced users.

NOTE: Drivers and documentation updates can be found at

support.dell.com.

NOTE: The Drivers and Utilities media may be optional and

may not ship with your computer.

• Warranty information

• Terms and Conditions (U.S. only)

• Safety instructions

• Regulatory information

• Ergonomics information

• End User License Agreement

Dell™ Product Information Guide

•How to remove and replace parts

• Specifications

• How to configure system settings

• How to troubleshoot and solve problems

User’s Guide

Microsoft Windows Help and Support Center

1

Click

Start

or

→

Help and Support

→

Dell User

and System Guides

→

System Guides

.

2

Click the

User’s Guide

for your computer.

6 Quick Reference Guide

• Service Tag and Express Service Code

• Microsoft Windows License Label

Service Tag and Microsoft

®

Windows

®

License

These labels are located on your computer.

• Use the Service Tag to identify your computer when you

use

support.dell.com

or contact support.

• Enter the Express

Service Code to direct

your call when

contacting support.

NOTE: The Microsoft

Windows License label has been redesigned with a hole, or

"security portal," as an increased security measure.

• Solutions — Troubleshooting hints and tips, articles

from technicians, online courses, and frequently

asked questions

• Community — Online discussion with other

Dell customers

• Upgrades — Upgrade information for components, such

as memory, the hard drive, and the operating system

• Customer Care — Contact information, service call and

order status, warranty, and repair information

• Service and support — Service call status and support

history, service contract, online discussions with

technical support

• Reference — Computer documentation, details on my

computer configuration, product specifications, and

white papers

• Downloads — Certified drivers, patches, and software

updates

• Notebook System Software (NSS)— If you reinstall the

operating system for your computer, you should also

reinstall the NSS utility. NSS provides critical updates

for your operating system and support for Dell™

3.5-inch USB floppy drives, AMD™ processors,

optical drives, and USB devices. NSS is necessary for

correct operation of your Dell computer. The software

automatically detects your computer and operating

system and installs the updates appropriate for your

configuration.

Dell Support Website — support.dell.com

NOTE: Select your region or business segment to view the

appropriate support site.

To download Notebook System Software:

1

Go to

support.dell.com

, select your region or business

segment, and enter your Service Tag.

2

Select

Drivers & Downloads

and click

Go

.

3

Click your operating system and search for the keyword

Notebook System Software

.

NOTE: The support.dell.com user interface may vary

depending on your selections.

What Are You Looking For? Find It Here

Quick Reference Guide 7

• Software upgrades and troubleshooting hints —

Frequently asked questions, hot topics, and general

health of your computing environment

Dell Support Utility

The Dell Support Utility is an automated upgrade and

notification system installed on your computer.

This support provides real-time health scans of your

computing environment, software updates, and relevant

self-support information. Access the Dell Support Utility

from the

icon in the task bar. For more information,

see "Dell Support Utility" in your

User’s Guide

.

• How to use Windows operating systems

• How to work with programs and files

• How to personalize my desktop

Windows Help and Support Center

1

Click the

Start

button or

→

Help and Support.

2

Type a word or phrase that describes your problem and

click the arrow icon.

3

Click the topic that describes your problem.

4

Follow the instructions on the screen.

• Information on network activity, the Power Management

Wizard, hotkeys, and other items controlled by Dell

QuickSet.

Dell QuickSet Help

To view

Dell QuickSet Help

,

right-click the QuickSet icon

in the Microsoft

®

Windows

®

task bar.

For more information on Dell QuickSet, see "Dell™ QuickSet"

in your User’s Guide.

• How to reinstall my operating system

The operating system is already installed on your computer.

See "Restoring Your Operating System" in your User’s Guide.

What Are You Looking For? Find It Here

8 Quick Reference Guide

Setting Up Your Computer

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide

.

1

Unpack the accessories box.

2

Set aside the contents of the accessories box, which you will need to complete the setup of your computer.

The accessories box also contains user documentation and any software or additional hardware (such

as PC Cards, drives, or batteries) that you have ordered.

3

Connect the AC adapter to the AC adapter connector on the computer and to the electrical outlet.

4

Open the computer display and press the power button to turn on the computer (see "Front View" on

page 9).

NOTE: It is recommended that you turn on and shut down your computer at least once before you install any cards

or connect the computer to a docking device or other external device, such as a printer.

Quick Reference Guide 9

About Your Computer

Front View

1 display latch 2 display 3 power button

4 device status lights 5 speakers (2) 6 keyboard

7 touch pad 8 touch pad buttons 9 keyboard status lights

10 wireless enable/disable button 11 ambient light sensor

1

5

2

9

7

4

10

3

6

8

11

10 Quick Reference Guide

Left Side View

Right Side View

Back View

CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vents. Do not store your

computer in a low-airflow environment, such as a closed briefcase, while it is running. Restricting the airflow

can damage the computer or cause a fire.

1 security cable slot 2 air vent 3 IEEE 1394 connector

4 audio connectors (2) 5 PC Card slot 6 hard drive

1 media bay 2 device latch release 3 USB connectors (2)

1 network connector (RJ-45) 2 S-video TV-out connector 3 USB connectors (2)

4 modem connector (RJ-11) 5 serial connector 6 VGA connector

7 AC adapter connector 8 air vents

4

3

5

1 62

1 23

8123 4 5 6 7

Quick Reference Guide 11

Bottom View

1 battery charge gauge 2 battery-bay latch release 3 battery

4 memory module/coin-cell battery

cover

5 docking device slot 6 air vents

7 hard drive

1 3

4

5

6

7

2

12 Quick Reference Guide

Using a Battery

Battery Performance

NOTE: For information about the Dell warranty for your computer, see the Product Information Guide or separate

paper warranty document that shipped with your computer.

For optimal computer performance and to help preserve BIOS settings, operate your Dell™ portable computer

with the main battery installed at all times. One battery is supplied as standard equipment in the battery bay.

NOTE: Because the battery may not be fully charged, use the AC adapter to connect your new computer to an electrical

outlet the first time you use the computer. For best results, operate the computer with the AC adapter until the battery is

fully charged. To view battery charge status, click Start

→

Control Panel

→

Power Options

→

Power Meter.

NOTE: Battery operating time (the time the battery can hold a charge) decreases over time. Depending on how

often the battery is used and the conditions under which it is used, you may need to purchase a new battery during

the life of your computer.

Battery operating time varies depending on operating conditions. You can install an optional second

battery in the media bay to significantly increase operating time.

Operating time is significantly reduced when you perform operations including, but not limited to,

the following:

•Using optical drives

• Using wireless communications devices, PC Cards, ExpressCards, media memory cards, or USB devices

• Using high-brightness display settings, 3D screen savers, or other power-intensive programs such as

complex 3D graphics applications

• Running the computer in maximum performance mode (see "Configuring Power Management Settings"

in your

User’s Guide

).

NOTE: It is recommended that you connect your computer to an electrical outlet when writing to a CD or DVD.

You can check the battery charge before you insert the battery into the computer (see "Checking the

Battery Charge" on page 13). You can also set power management options to alert you when the battery

charge is low

(see "Configuring Power Management Settings" in your

User’s Guide

).

CAUTION: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery only

with a compatible battery purchased from Dell. The lithium-ion battery is designed to work with your Dell computer.

Do not use a battery from other computers with your computer.

CAUTION: Do not dispose of batteries with household waste. When your battery no longer holds a charge, call

your local waste disposal or environmental agency for advice on disposing of a lithium-ion battery. See "Battery

Disposal" in the

Product Information Guide

.

CAUTION: Misuse of the battery may increase the risk of fire or chemical burn. Do not puncture, incinerate,

disassemble, or expose the battery to temperatures above 60°C (140°F). Keep the battery away from children.

Handle damaged or leaking batteries with extreme care. Damaged batteries may leak and cause personal injury

or equipment damage.

Quick Reference Guide 13

Checking the Battery Charge

The Dell QuickSet Battery Meter, the Microsoft Windows Power Meter window and icon, the

battery charge gauge and health gauge, and the low-battery warning provide information on the battery charge.

Dell™ QuickSet Battery Meter

If Dell QuickSet is installed, press <Fn><F3> to display the QuickSet Battery Meter. The Battery Meter

displays status, battery health, charge level, and charge completion time for the battery in your computer.

For more information about QuickSet, right-click the QuickSet icon in the task bar, and click Help.

Microsoft

®

Windows

®

Power Meter

The Windows Power Meter indicates the remaining battery charge. To check the Power Meter, double-click

the icon on the task bar.

If the computer is connected to an electrical outlet, a icon appears.

Charge Gauge

By either pressing once or pressing and holding the status button on the charge gauge on the battery,

you can check:

• Battery charge (check by pressing and

releasing

the status button)

• Battery health (check by pressing and

holding

the status button)

The battery operating time is largely determined by the number of times it is charged. After hundreds of

charge and discharge cycles, batteries lose some charge capacity—or battery health. That is, a battery can

show a status of "charged" but maintain a reduced charge capacity (health).

Check the Battery Charge

To check the battery charge, press and release the status button on the battery charge gauge to illuminate

the charge-level lights. Each light represents approximately 20 percent of the total battery charge.

For example, if the battery has 80 percent of its charge remaining, four of the lights are on. If no lights

appear, the battery has no charge.

Check the Battery Health

NOTE: You can check battery health in one of two ways: by using the charge gauge on the battery as described

below and by using the Battery Meter in Dell QuickSet. For information about QuickSet, right-click the

QuickSet

icon in the task bar, and click Help.

To check the battery health using the charge gauge, press and hold the status button on the battery

charge gauge for at least 3 seconds. If no lights appear, the battery is in good condition, and more than

80 percent of its original charge capacity remains. Each light represents incremental degradation. If five

lights appear, less than 60 percent of the charge capacity remains, and you should consider replacing the

battery. See "Specifications" in your User’s Guide for more information about the battery operating time.

14 Quick Reference Guide

Low-Battery Warning

NOTICE: To avoid losing or corrupting data, save your work immediately after a low-battery warning.

Then connect the computer to an electrical outlet, or install a second battery in the media bay. If the battery runs

completely out of power, hibernate mode begins automatically.

By default, a pop-up window warns you when the battery charge is approximately 90 percent depleted.

You can change the settings for the battery alarms in QuickSet or the Power Options Properties window.

See

"Configuring Power Management Settings" in your

User’s Guide

for information about accessing

QuickSet or the Power Options Properties window.

Charging the Battery

NOTE: With Dell™ ExpressCharge™, when the computer is turned off, the AC adapter charges a completely

discharged battery to 80 percent in about 1 hour and to 100 percent in approximately 2 hours. Charge time is longer

with the computer turned on. You can leave the battery in the computer for as long as you like. The battery’s internal

circuitry prevents the battery from overcharging.

NOTE: You must use a 90-Watt AC adaptor to use ExpressCharge a 9-cell battery.

When you connect the computer to an electrical outlet or install a battery while the computer is connected

to an electrical outlet, the computer checks the battery charge and temperature. If necessary, the AC adapter

then charges the battery and maintains the battery charge.

If the battery is hot from being used in your computer or being in a hot environment, the battery may

not charge when you connect the computer to an electrical outlet.

The battery is too hot to start charging if the light flashes alternately green and orange. Disconnect

the computer from the electrical outlet and allow the computer and the battery to cool to room temperature.

Then connect the computer to an electrical outlet to continue charging the battery.

For more information about resolving problems with a battery, see "Power Problems" in your User’s Guide.

Removing the Battery

CAUTION: Before performing these procedures, turn off the computer, disconnect the AC adapter from the

electrical outlet and the computer, disconnect the modem from the wall connector and computer, and remove any

other external cables from the computer.

CAUTION: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery only

with a compatible battery purchased from Dell. The battery is designed to work with your Dell™ computer. Do not

use a battery from other computers with your computer.

NOTICE: You must remove all external cables from the computer to avoid possible connector damage.For information

about replacing the second battery, which is located in the media bay, see "Using Multimedia" in your User’s Guide.

Quick Reference Guide 15

To remove the battery:

1

If the computer is connected to a docking device (docked), undock it. See the documentation that

came with your docking device for instructions.

2

Ensure that the computer is turned off, in hibernate mode, or connected to AC adapter.

NOTICE: Removing the battery in while the computer is in standby mode (without AC power) causes the computer

to shut down and may result in loss of data.

3

Slide and hold the battery-bay latch release on the bottom of the computer.

4

Lift the battery out of the battery bay.

To replace the battery, place the battery in the bay and press down until the battery-bay latch release clicks.

Storing a Battery

Remove the battery when you store your computer for an extended period of time. A battery discharges

during prolonged storage. After a long storage period, recharge the battery fully before you use it

(see "Charging the Battery" on page 14).

1 battery 2 battery-bay latch release

1 2

16 Quick Reference Guide

Troubleshooting

Lockups and Software Problems

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide

.

The computer does not start up

ENSURE THAT THE AC ADAPTER IS FIRMLY CONNECTED TO THE COMPUTER AND TO THE ELECTRICAL OUTLET.

The computer stops responding

NOTICE: You might lose data if you are unable to perform an operating system shutdown.

T

URN THE COMPUTER OFF — If you are unable to get a response by pressing a key on your keyboard or moving

your mouse, press and hold the power button for at least 8 to 10 seconds until the computer turns off.

Then restart your computer.

A program stops responding or crashes repeatedly

NOTE: Software usually includes installation instructions in its documentation or on a floppy disk or CD.

E

ND THE PROGRAM —

1

Press <Ctrl><Shift><Esc> simultaneously.

2

Click

Tas k M an ag er

.

3

Click

Applications

.

4

Click the program that is no longer responding.

5

Click

End Task

.

CHECK THE SOFTWARE DOCUMENTATION — If necessary, uninstall and then reinstall the program.

A program is designed for an earlier operating system version

RUN THE PROGRAM COMPATIBILITY WIZARD — The Program Compatibility Wizard configures a program

so that it runs in an environment similar to non-Windows XP operating system environments.

1

Click

Start

→

All Programs

→

Accessories

→

Program Compatibility Wizard

→

2

Follow the instructions on the screen.

A solid blue screen appears

TURN THE COMPUTER OFF — If you are unable to get a response by pressing a key on your keyboard or

moving your mouse, press and hold the power button for at least 8 to 10 seconds until the computer

turns off. Then restart your computer.

Quick Reference Guide 17

Other software problems

CHECK THE SOFTWARE DOCUMENTATION OR CONTACT THE SOFTWARE MANUFACTURER FOR TROUBLESHOOTING

INFORMATION —

• Ensure that the program is compatible with the operating system installed on your computer.

• Ensure that your computer meets the minimum hardware requirements needed to run the software.

See the software documentation for information.

• Ensure that the program is installed and configured properly.

• Verify that the device drivers do not conflict with the program.

• If necessary, uninstall and then reinstall the program.

BACK UP YOUR FILES IMMEDIATELY.

U

SE A VIRUS-SCANNING PROGRAM TO CHECK THE HARD DRIVE, FLOPPY DISKS, OR CDS.

S

AVE AND CLOSE ANY OPEN FILES OR PROGRAMS AND SHUT DOWN YOUR COMPUTER THROUGH THE Start MENU.

S

CAN THE COMPUTER FOR SPYWARE — If you are experiencing slow computer performance, you frequently

receive pop-up advertisements, or you are having problems connecting to the Internet, your computer

might be infected with spyware. Use an anti-virus program that includes anti-spyware protection (your

program may require an upgrade) to scan the computer and remove spyware. For more information, go to

support.dell.com and search for the keyword spyware.

RUN THE DELL DIAGNOSTICS — See "Dell Diagnostics" on page 17. If all tests run successfully, the error

condition is related to a software problem.

Dell Diagnostics

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide

.

When to Use the Dell Diagnostics

If you experience a problem with your computer, perform the checks in "Lockups and Software Problems"

on page 16 and run the Dell Diagnostics before you contact Dell for technical assistance.

It is recommended that you print these procedures before you begin.

NOTICE: The Dell Diagnostics works only on Dell™ computers.

NOTE: The Drivers and Utilities Media is optional and may not ship with your computer.

Start the Dell Diagnostics from either your hard drive or from the Drivers and Utilities media.

Starting the Dell Diagnostics From Your Hard Drive

The Dell Diagnostics is located on a hidden diagnostic utility partition on your hard drive.

NOTE: If your computer cannot display a screen image, contact Dell (see "Contacting Dell" in your User’s Guide).

NOTE: If the computer is connected to a docking device (docked), undock it. See the documentation that came

with your docking device for instructions.

18 Quick Reference Guide

1

Ensure that the computer is connected to an electrical outlet that is known to be working properly.

2

Turn on (or restart) your computer.

3

Start the Dell Diagnostics in one of the following two ways:

a

When the DELL™ logo appears, press <F12> immediately. Select

Diagnostics

from the boot

menu and press <Enter>.

NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the

Microsoft

®

Windows

®

desktop; then, shut down your computer and try again.

NOTE: Before attempting option b, the computer must be powered down completely.

b

Press and hold the <Fn> key while powering the computer on.

NOTE: If you see a message stating that no diagnostics utility partition has been found, run the

Dell Diagnostics from the Drivers and Utilities media.

The computer runs the Pre-boot System Assessment (PSA), a series of initial tests of your system

board, keyboard, display, memory, hard drive, and so on.

• During the assessment, answer any questions that appear.

• If failures are detected during the Pre-boot System Assessment, write down the error code(s) and

see "Contacting Dell"

in your User’s Guide

.

4

If the Pre-boot System Assessment completes successfully, you will receive the message, "

Booting

Dell Diagnostic Utility Partition. Press any key to continue

".

5

Press any key to start the Dell Diagnostics from the diagnostics utility partition on your hard drive.

Starting the Dell Diagnostics From the Drivers and Utilities Media

1

Insert the

Drivers and Utilities

Media.

2

Shut down and restart the computer.

When the DELL logo appears, press <F12> immediately.

NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the

Microsoft

®

Windows

®

desktop; then, shut down your computer and try again.

NOTE: The next steps change the boot sequence for one time only. On the next start-up, the computer boots

according to the devices specified in the system setup program.

3

When the boot device list appears, highlight

CD/DVD/CD-RW Drive

and press <Enter>.

4

Select the

Boot from CD-ROM

option from the menu that appears and press <Enter>.

5

Ty pe

1

to start the menu and press <Enter> to proceed.

6

Select

Run the 32 Bit Dell Diagnostics

from the numbered list. If multiple versions are listed, select

the version appropriate for your computer.

7

When the Dell Diagnostics

Main Menu

appears, select the test you want to run.

Quick Reference Guide 19

Dell Diagnostics Main Menu

1

After the Dell Diagnostics loads and the

Main

Menu

screen appears, click the button for the option

you want.

NOTE: It is recommended that you select Test System to run a complete test on your computer.

2

After you have selected the

Test System

option from the main menu, the following menu appears.

NOTE: It is recommended that you select Extended Test from the menu below to run a more thorough

check of devices in the computer.

3

If a problem is encountered during a test, a message appears with an error code and a description of the

problem. Write down the error code and problem description and contact Dell (see Contacting Dell in

your

User’s Guide

).

NOTE: The Service Tag for your computer is located at the top of each test screen. If you contact Dell,

technical support will ask for your Service Tag.

Option Function

Test Memory Runs the stand-alone memory test

Test System Runs System Diagnostics

Exit Exits the Diagnostics

Option Function

Express Test Performs a quick test of devices in the

system. This typically can take 10 to

20 minutes.

Extended Test Performs a thorough check of devices in the

system. This typically can take an hour or

more.

Custom Test Use to test a specific device or customize

the tests to be run.

Symptom Tree This option allows you to select tests based

on a symptom of the problem you are having.

This option lists the most common symptoms.

20 Quick Reference Guide

4

If you run a test from the

Custom Test

or

Symptom Tree

option, click the applicable tab

described in the following table for more information.

5

When the tests are complete, close the test screen to return to the

Main

Menu

screen. To exit the Dell

Diagnostics and restart the computer, close the

Main

Menu

screen.

6

Remove the Dell

Drivers and Utilities

media (if applicable).

Tab Function

Results Displays the results of the test and any error conditions encountered.

Errors Displays error conditions encountered, error codes, and the problem

description.

Help Describes the test and may indicate requirements for running the test.

Configuration Displays your hardware configuration for the selected device.

The Dell Diagnostics obtains configuration information for all devices

from system setup, memory, and various internal tests, and it displays

the information in the device list in the left pane of the screen. The

device list may not display the names of all the components installed

on your computer or all devices attached to your computer.

Parameters Allows you to customize the test by changing the test settings.

La page charge ...

Dell Latitude D531 spécification

Dell Latitude D531 spécification

dans d''autres langues